Safety Information
Renseignements relatifs à la sécurité
Personal Computer / Ordinateur personnel
VGC-LT30 Series
Certain product(s) included with this computer may include features such as copy protection and content
management technology. USE OF THE SOFTWARE PRODUCT(S) REQUIRES AGREEMENT TO
APPLICABLE END USER AGREEMENTS AND FULL COMPLIANCE WITH APPLICABLE PRODUCT
ACTIVATION PROCEDURES. Product activation procedures and privacy policies will be detailed during initial
launch of the software product(s), or upon certain reinstallations of the software product(s), or reconfigurations of
the computer, and may be completed by Internet or telephone (toll charges may apply).
Updates and additions to software may require an additional charge. Subscriptions to online service providers may
require a fee and credit card information. Financial services may require prior arrangements with participating
financial institutions.
Important information for Canadian customers: Your new VAIO® computer includes certain software versions
or upgrades, and Internet services or offers that are available to U.S. customers only.
i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection.
The i.LINK connection may vary, depending on the software applications, operating system, and compatible i.LINK
devices. All products with an i.LINK connection may not communicate with each other. Please refer to the
documentation that came with your compatible i.LINK device for information on operating conditions and proper
connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
Sony, VAIO, and the VAIO logo are trademarks or registered trademarks of Sony Corporation.
All other trademarks are trademarks or registered trademarks of their respective owners.
The Wireless LAN functionality, which is incorporated into selected models only,
has passed Wi-Fi certification and complies with the interoperability specifications
established by WFA (Wi-Fi Alliance).
Reverse engineering or disassembly is prohibited.
End User / Product Activation Requirements
Certain software product(s) included with this computer may include features such as copy protection and content
management technology. Use of the software product(s) requires agreement to applicable end user agreements and
full compliance with applicable product activation procedures. Product activation procedures and privacy policies
will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software
product(s) or reconfiguration of the computer, and may be completed by Internet or telephone (toll charges may
apply).
3
Safety Information and Caution
Your computer’s installed optical drives may vary, depending on the system configuration you have purchased. See
the online specifications sheet for details on your installed optical drives. For questions regarding your product or for
For the State of California, USA only
Perchlorate Material - special handling may apply, See
Perchlorate Material: Lithium battery contains perchlorate.
❑
❑
❑
❑
❑
To prevent fire or shock hazard, do not expose your computer to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Never install modem or telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the
network interface.
❑
❑
❑
❑
❑
Use caution when installing or modifying telephone lines.
Avoid using the modem during an electrical storm.
Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Do not use or store your computer in a location subject to heat sources, such as radiators or air ducts; direct
sunlight; excessive dust; moisture or rain; mechanical vibration or shock; strong magnets or speakers that are
not magnetically shielded; ambient temperature higher than 95ºF (35ºC) or less than 40ºF (5ºC); and high
humidity.
❑
❑
❑
❑
Do not use wireless LAN on hospital premises. Doing so may cause medical devices to malfunction.
Do not use wireless LAN on an aircraft, as doing so may cause the aircraft's equipment to malfunction.
If using wireless LAN near a pacemaker, make sure it is at least 8 inches (20 cm) away from the pacemaker.
Sony is not responsible for any interference that you may experience or that may be caused when operating
this device.
❑
❑
For models with a TV tuner, the cable distribution system should be grounded (earthed) in accordance with
ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93.
For models with an external TV tuner: the tuner shall only be used with PCG-2C1L (the external TV tuner
bundled models only) for safe operation.
4
To change the backup battery, please contact your nearest Sony
Service Center.
Caution - The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this product is
harmful to eyes, do not attempt to disassemble the cabinet. Refer
servicing to the qualified personnel only.
For this optical equipment: Caution - Class 3B visible and invisible
laser radiation when open. Avoid exposure to the beam.
Caution - To reduce the risk of fire, use only No. 26 AWG or larger
UL listed or CSA certified telecommunication line cord.
The following cautions apply to the models which support the IEEE 802.11a (5 GHz) standard.
Only use Wireless LAN indoors when using it with IEEE 802.11a (5 GHz).
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-
5850 MHz and these radars could cause interference and/or damage to this device.
This device uses the 5 GHz band for wireless LAN communication and the maximum gain of the antenna in this
device is 5 dBi.
Wireless LAN Security
Creating security settings for the Wireless LAN is extremely important. Sony assumes no responsibility for any
security problems that may arise from the use of the Wireless LAN.
5
Avertissement
Pour toute question concernant ce produit, veuillez ècrire à Sony Customer Information Service Center au
12451 Gateway Blvd., Fort Myers, FL 33913, USA ou retrouves le Sony Customer Service (service consommateur
❑
❑
Pour prévenir tout risque d’incendie ou d’électrocution, garder cet appareil à l’abri de la pluie et de
l’humidité.
Pour prévenir tout risque d’électrocution, ne pas ouvrir le châssis de cet appareil et ne confier son entretien
qu’à une personne qualifiée.
❑
❑
Ne jamais effectuer l’installation de fil modem ou telephone durant un orage electrique.
Ne jamais effectuer l’installation d’une prise telephonique dans un endroit mouille a moins que la prise soit
concue a cet effet.
❑
Ne jamais toucher un fil telephonique a decouvert ou un terminal a moins que la ligne telephonique n’ait ete
debranche de l’interface reseau.
❑
❑
❑
❑
❑
Soyez tres prudent lorsque vous installez ou modifiez les lignes telephoniques.
Evitez d’utiliser le modem durant un orage electrique.
N’utilisez pas le modem ni le telephone pour prevenir d’une fuite de gaz vous etes pres de la fuite.
L’appareil doit être le plus près possible d’une prise murale pour en faciliter l’accès.
Évitez d'utiliser ou de ranger votre ordinateur dans un endroit soumis à : des sources de chaleur telles que des
radiateurs ou des bouches d'aération ; la lumière directe du soleil ; une poussière excessive ; l'humidité ou la
pluie ; des vibrations ou des chocs mécaniques ; des aimants puissants ou des haut-parleurs dépourvus de
blindage antimagnétique ; une température ambiante supérieure à 35°C (95°F) ou inférieure à 5°C (40°F) ; et
une forte humidité.
❑
❑
❑
❑
❑
Ne pas utiliser le réseau local sans fil dans les hôpitaux car cela risquerait de provoquer le mauvais
fonctionnement des appareils médicaux.
Ne pas utiliser le réseau local sans fil dans un avion car cela risquerait de provoquer le mauvais
fonctionnement des appareils de vol.
Si vous utilisez le réseau local sans fil à proximité d’un stimulateur cardiaque, assurez-vous qu’il est au moins
à 8 pouces (20 cm) du stimulateur cardiaque.
Sony n'est pas responsable des interférences que vous risquez de rencontrer ou qui risquent d'être provoquées
lors du fonctionnement de cet appareil.
Pour modèles munis d’un syntoniseur télé, le système de cablodistribution devrait être mis à la terre
conformément à la norme ANSI/NFPA 70, en particulier à l'article 820.93 du National Electrical Code (NEC)
des États-Unis.
6
Pour changer la pile de rechange, veuillez contacter votre centre de
service Sony le plus près.
Avertissement - L'utilisation d'instruments optiques avec ce produit
augmente les risques oculaires. Le rayon laser utilisé dans ce
produit représentant un danger pour les yeux, n'essayez pas de
démonter le boîtier. Ne confiez l'entretien qu'à un technicien qualifié.
Pour cet équipement optique : Avertissement - Rayonnement laser
visible et invisible de classe 3B en cas d'ouverture. Evitez toute
exposition au faisceau.
Attention - Afin de réduire le risque d'incendie, utilisez uniquement
un câble de transmission certifié No. 26 AWG, UL ou CSA de plus
grand diamètre.
Les avis suivants se rapportent aux modèles qui prennent en charge la norme IEEE 802.11a (5 GHz).
Utiliser le réseau local sans fil à l’intérieur uniquement lorsqu’il est utilisé avec IEEE 802.11a (5 GHz).
Les radars à haute puissance sont alloués en tant qu’usagers principaux (ce qui signifie qu’ils ont la priorité) de
5 250-5 350 MHz et 5 650-5 850 MHz et ces radars pourraient provoquer des interférences ou encore des
dommages à l’appareil.
Ce périphérique utilise une bande de fréquences 5 GHz lors de communication sans fil LAN et le gain maximal
de l’antenne de l’appareil est de 5 dBi.
Sécurité du réseau local sans fil
La création de paramètres de sécurité pour le réseau local sans fil est extrêmement importante. Sony n’est pas tenu
responsable des problèmes de sécurité susceptibles de se produire lors de l’utilisation du réseau local sans fil.
7
Regulatory Information
If you have questions about this product, you can write to the Sony Customer Information Service Center at
12451 Gateway Blvd., Fort Myers, FL 33913, USA or find Sony Customer Service on the Web site at:
http://esupport.sony.com/EN/VAIO/ for customers in USA or http://www.sony.ca/support/ for customers in Canada.
Declaration of Conformity
Trade Name:
Model No.:
SONY
PCG-2C1L
Responsible Party:
Address:
Sony Electronics Inc.
16530 Via Esprillo, San Diego, CA 92127, USA
858-942-2230
Telephone:
(For FCC-related matters only.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Model No.: ENX-42 and M10CS (For models equipped with TV and personal video recording features)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Model No.: VGP-WKB5US (wireless keyboard), and VGP-WMS1 (wireless mouse)
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
8
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
❑
❑
❑
❑
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may
be attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to
radio and television reception.
All cables used to connect peripherals must be shielded and grounded. Operation with cables, connected to
peripherals, that are not shielded and grounded, may result in interference to radio and television reception.
FCC Part 68
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the modem
card is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
This modem uses the USOC RJ-11C telephone jack.
A telephone plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. The REN is used to
determine the quantity of devices which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most,
but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may
be connected to the line, as determined by the total RENs, contact the telephone company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier that has the format
US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g. 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect
the operations of the equipment. If this happens, the telephone company will provide advance notice in order for you
to make the necessary modifications in order to maintain uninterrupted service.
9
If trouble is experienced with this equipment, for repair or warranty information, please contact the Sony Customer
Information Service Center at 1-888-4-SONY-PC (1-888-476-6972), or write to the Sony Customer Information
Center, 12451 Gateway Blvd., Fort Myers, FL 33913, USA, or find Sony Customer Service on the Web site at
http://esupport.sony.com/EN/VAIO/. If this equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment from the network until the problem is resolved.
Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For the Sony
Service Center nearest you, call 1-888-4-SONY-PC (1-888-476-6972), or visit the Sony online support Web site at
Connection to a Party Line Service is subject to state tariffs. Contact the state public utility commission, public
service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
Please use a surge arrestor against electrical surges.
Supplier’s Declaration of Conformity
Conexant modem RD02-D330
This supplier’s declaration of conformity applies to the internal modem unit of selected VAIO® computers.
10
Telephone Consumer Protection Act of 1991 (United States)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any message unless such message clearly contains, in a margin
at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and
an identification of the business, other entity, or individual sending the message, and the telephone number of the
sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900
number or any other number for which charges exceed local or long distance transmission charges.)
In order to program this information into your facsimile machine, see your fax software documentation.
Industry Canada Notice
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The Ringer Equivalence Number (REN)
is an indication of the maximum number of devices allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices subject only to the requirement that the sum
of the RENs of all the devices does not exceed five.
This Class B digital apparatus complies with Canadian ICES-003.
Model No.: ENX-42 (For models equipped with personal video recording features)
Supplementary Television Broadcasting Receiving Apparatus.
Avis de L’Industrie Canada
REMARQUE : Cet équipement est conforme aux Spécifications Techniques des Équipements Terminaux
d’Industrie Canada en vigueur.
L’indice d’équivalence de la sonnerie de ce matériel est de 0,1. L’indice d’équivalence de la sonnerie (IES) sert à
indiquer le nombre maximal de termiaux qui peuvent être raccordés à une interface téléphonique. La terminaison
d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme
d’indices d’équivalence de la sonnerie de tous les dispositifs n’excéde pas 5.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Numéro de modèle : ENX-42 (pour modèles dotés de fonctions d'enregistrement personnel de vidéo)
Appareils supplémentaires de réception de télévision, Canada.
11
FCC/IC Radio Frequency Exposure
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 8 inches (20 cm) between the radiator and your
body (excluding extremities: hands, wrists and feet).
This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant
condition. Users are not permitted to modify this transmitter device. Any unauthorized changes made to this device
could void your authority to operate this device.
The personal computer contains a Wireless LAN transmitter which is co-located and operating simultaneously with
a 0.12mW Wireless USB Receiver module FCC ID: AQ6-VGP-WRC3.
Exposition aux radiofréquences FCC/IC
Cet équipement est conforme aux limites d'exposition aux rayonnements FCC/IC définies pour un environnement
non réglementé. Cet équipement doit être installé et utilisé à une distance minimale de 8 pouces (20 cm) entre
l'élément rayonnant et votre corps (à l'exception des extrémités : mains, poignets et pieds).
Cet appareil et sa ou ses antennes ne doivent pas être placés à proximité d'autres antennes ou émetteurs ni
fonctionner avec eux, sauf autorisation spéciale. Les utilisateurs ne sont pas autorisés à modifier cet émetteur. Toute
modification non autorisée apportée à cet émetteur peut annuler vos droits d'utilisation de l'appareil.
IC RSS-210 (Canada)
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de
brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé à
l’intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son
antenne d’émission) est installé à l’extérieur, il doit faire l’objet d’une licence.
Disposal Information
Disposing mercury containing products (United States)
Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance
(http://www.eiae.org).
12
Recycling Information
Do not handle damaged or leaking lithium ion batteries.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the
manufacturer. Discard used batteries according to the
manufacturer’s instructions.
Ne pas utiliser des batteries au lithium ionisé qui sont
endommagées ou qui fuient.
Une batterie non conforme présente un danger d'explosion. La
remplacer seulement par une batterie identique ou de type
équivalent recommandé par le fabricant. Évacuer les batteries
usées selon les directives du fabricant.
13
VAIO Support Homepage
Spanish speaking Latin American countries or areas)
© 2008 Sony Corporation / Printed in China
3-877-520-11(1)
|