Sony Portable CD Player NE830LS User Manual

2-653-429-12 (1)  
D-NE830/NE830LS  
Operating Instructions  
ATRAC CD Walkman  
Portable  
CD Player  
© 2005 Sony Corporation  
 
 
Table of Contents  
Instructions in this manual mainly describe the  
controls on the remote.  
Depending on the region in which you use the  
player, indications displayed on your remote may be  
slightly different from those shown in the Operating  
Instructions.  
About trademarks  
WALKMAN” is a registered trademark of  
Sony Corporation to represent Headphone  
Stereo products.  
trademark of Sony Corporation.  
is a  
SonicStage is a trademark of Sony  
Corporation.  
ATRAC, ATRAC3, ATRAC3plus and  
ATRAC Advanced Lossless are trademarks  
of Sony Corporation.  
3
 
Create Your Own ATRAC CDs  
In addition to the regular audio CDs, you can play original CDs (“ATRAC” CDs) that you created  
with the SonicStage software. Using SonicStage, about 30 audio CDs* can be recorded on one  
CD-R or CD-RW. SonicStage can be downloaded free of charge.  
The following is a quick overview of how you listen to music on your ATRAC CD.  
Install SonicStage on your computer.  
SonicStage is a software product that takes music  
from audio CDs or downloaded from the Internet  
onto your computer to create your own original  
CDs. SonicStage can be downloaded from the  
specified site ( page 35) and installed on your  
computer.  
ATRAC CD  
Create an ATRAC CD.  
After selecting your favorite songs from music stored  
on your computer, record them on a CD-R/CD-RW  
using SonicStage.  
Audio CDs,  
MP3 files  
Listen to them with this CD player.  
You can take lots of songs wherever you go on your  
original CD.  
• The appropriate system environment to access the Internet is required.  
For details, refer to the instruction manual of your computer.  
• For how to install SonicStage and how to create an ATRAC CD, visit  
and get information from the specified site for downloading SonicStage.  
You can also check the SonicStage help section.  
* When the total playing time of one CD (album) is estimated at 60 minutes and  
you are recording on a 700 MB CD-R/CD-RW at 48 kbps in ATRAC format.  
For customers who purchased the models supplied with the SonicStage (CD-ROM)  
You can install SonicStage from the supplied CD-ROM.  
• Please see the supplied “Installation/Operating Guide” for how to install SonicStage and how to  
create ATRAC CDs.  
4
 
 
Which discs can you play on this CD player?  
Audio CDs:  
CD-DA format CDs  
CD-DA (Compact Disc Digital Audio) is a recording  
standard used for Audio CDs.  
ATRAC CDs:  
CD-R/CD-RW on which audio data compressed in the ATRAC format has  
been recorded*  
ATRAC is the general term used to refer to Sony Corporation audio codec technologies  
ATRAC3, ATRAC3plus, and ATRAC Advanced Lossless**. ATRAC3 and ATRAC3plus,  
with their high quality compression ratio, and ATRAC Advanced Lossless**, with its  
no-data-loss compression, combine to provide a vast array of possibilities.  
** This player is not compatible with ATRAC Advanced Lossless.  
Bit rates and sampling frequencies this CD player can play are:  
Bit rates  
66/105/132 kbps  
Sampling frequencies  
44.1 kHz  
ATRAC3  
ATRAC3plus  
48/64/256 kbps  
44.1 kHz  
Information (track name, album name, artist name, etc.) of up to 62-characters can be  
displayed on this CD player.  
MP3 CDs:  
CD-R/CD-RW on which audio data compressed in the MP3 format has  
been recorded*  
Bit rates and sampling frequencies this CD player can play are shown below. Variable  
Bit Rate (VBR) files can also be played.  
Bit rates  
Sampling frequencies  
32/44.1/48 kHz  
MPEG-1 Layer3  
MPEG-2 Layer3  
MPEG-2.5 Layer3  
32 - 320 kbps  
8 - 160 kbps  
8 - 160 kbps  
16/22.05/24 kHz  
8/11.025/12 kHz  
This CD player conforms to Version 1.0/1.1/2.2/2.3/2.4 of the ID3 tag format. ID3 tag is a  
format for adding certain information (track name, album name, artist name, etc.) to MP3  
files. Up to 64 characters of ID3 tag information can be displayed on this CD player.  
CD-Extra and Mix-Mode CDs:  
CD-R/CD-RW on which CD-DA format data and CD-ROM format data are  
recorded together.*  
If you cannot play your CD, change the “CD-EXTRA” setting ( page 27). Then  
you may play your CD.  
An ATRAC CD on which audio data compressed in the MP3 format has been recorded using  
software other than SonicStage can also be played.  
With SonicStage, you cannot create a CD on which mixed format audio data is recorded.  
* Only ISO 9660 Level 1/2 and Joliet extension format discs can be played.  
Continued  
5
 
 
Music discs encoded with copyright  
protection technologies  
Group  
File  
MP3  
This product is designed to play back  
discs that conform to the Compact Disc  
(CD) standard. Recently, various music  
discs encoded with copyright protection  
technologies are marketed by some record  
companies. Please be aware that among those  
discs, there are some that do not conform to  
the CD standard and may not be playable by  
this product.  
Note on DualDiscs  
(Maximum directory levels: 8)  
A DualDisc is a two sided disc product  
which mates DVD recorded material on one  
side with digital audio material on the other  
side. However, since the audio material side  
does not conform to the Compact Disc (CD)  
standard, playback on this product is not  
guaranteed.  
Notes  
• If ATRAC files and MP3 files are recorded on the  
same CD, this CD player plays the ATRAC files  
first.  
• The playback capability of this CD player may  
vary depending on the quality of the disc and the  
condition of the recording device.  
• Acceptable characters are A to Z, a to z, 0 to 9,  
and _ (underscore).  
Difference in File structures of ATRAC CDs  
and MP3 CDs  
ATRAC CDs and MP3 CDs consist of  
“files” and “groups.” A “file” is equivalent  
to a “track” of an audio CD. A “group”  
is a bundle of files and is equivalent to an  
“album.”  
For MP3 CDs, this CD player recognizes an  
MP3 folder as a “group” so that ATRAC CDs  
and MP3 CDs can be operated in the same  
way.  
• On a disc that has ATRAC/MP3 files, do not save  
files in other formats and do not make unnecessary  
folders.  
About ATRAC CDs  
• CD-Rs/CD-RWs recorded in the ATRAC format  
cannot be played on your computer.  
About MP3 CDs  
• Be sure to add the file extension “mp3” to the file  
name. However, if you add the extension “mp3”  
to a file other than an MP3 file, the player will not  
be able to recognize the file properly.  
• To compress a source in an MP3 file, we  
recommend setting the compression parameters to  
“44.1 kHz,” “128 kbps,” and “Constant Bit Rate.”  
The usable number of groups and files  
• Maximum number of groups: 256  
• Maximum number of files: 999  
• To record up to the maximum capacity, set the  
writing software to “halting of writing.”  
• To record up to the maximum capacity at one time  
on media that has nothing recorded on it, set the  
writing software to “Disc at Once.”  
Playing order of ATRAC CDs and MP3 CDs  
For ATRAC CDs, files are played in the order  
selected in SonicStage.  
For MP3 CDs, the playing order may differ  
depending on the method used to record MP3  
files on the disc. A “play list” which contains  
an MP3 file playing order can also be played.  
In the following example, files are played in  
order of to .  
6
 
On headphones  
Precautions  
Road safety  
Do not use headphones while driving, cycling,  
or operating any motorized vehicle. It may  
create a traffic hazard and is illegal in some  
areas. It can also be potentially dangerous  
to play your headsets at high volume while  
walking, especially at pedestrian crossings.  
You should exercise extreme caution or  
discontinue use in potentially hazardous  
situations.  
On safety  
• Should any solid objects or liquid fall into  
the CD player, unplug it and have it checked  
by qualified personnel before operating it  
any further.  
• Do not put any foreign objects in the DC IN  
3 V (external power input) jack.  
On the CD player  
Preventing hearing damage  
• Keep the lens on the CD player clean and  
do not touch it. If you do so, the lens may  
be damaged and the CD player will not  
operate properly.  
Avoid using headphones at high volume.  
Hearing experts advise against continuous,  
loud and extended play. If you experience  
a ringing in your ears, reduce volume or  
discontinue use.  
• Do not put any heavy object on top of the  
CD player. The CD player and the CD may  
be damaged.  
• Do not leave the CD player in a location  
near heat sources, or in a place subject  
to direct sunlight, excessive dust or sand,  
moisture, rain, mechanical shock, unleveled  
surface, or in a car with its windows closed.  
Consideration for others  
Keep the volume at a moderate level. This  
will allow you to hear outside sounds and to  
be considerate to the people around you.  
• If the CD player causes interference to the  
radio or television reception, turn off the  
CD player or move it away from the radio  
or television.  
• Discs with non-standard shapes (e.g., heart,  
square, star) cannot be played on this CD  
player. Attempting to do so may damage  
the CD player. Do not use such discs.  
On handling CDs  
• To keep the CD clean, handle it by its edge.  
Do not touch the surface.  
• Do not stick paper or tape onto the CD.  
• Do not expose the CD to direct sunlight or  
heat sources such as hot air ducts. Do not  
leave the CD in a car parked under direct  
sunlight.  
7
 
 
Getting Started  
To connect your headphones to the remote  
Connect the plug of your headphones to the  
remote securely.  
Checking the Supplied  
Accessories  
• AC power adaptor  
(AC-ES3010K2) (1)  
To use the clip of the remote  
You can change the direction of the clip. Turn  
the clip as shown below. You can also reverse  
• External battery  
case (1)  
• Rechargeable  
battery (1)  
the direction of the track name, etc. ( page  
25, 27).  
• Battery carrying  
case (1)  
• Carrying Pouch (1)  
• Headphones (1)  
• Remote control  
(Remote) (1)  
(For this CD player only)  
• Operating instructions (1)  
• AC plug adaptor (Supplied with tourist  
model) (1)  
Note  
Use only the supplied remote. You cannot operate  
this player with any other remote.  
8
 
 
(group) +/– buttons ( page 16)  
Guide to Parts and  
Controls  
/buttons ( page 16)  
CD Player:  
VOL (Volume) +*/– buttons ( page 15)  
Remote:  
CD player (rear)  
VOL (Volume) +/– control  
(
page 15, 17, 22, 23)  
HOLD switch ( page 17)  
Screw hole for the external battery case  
(
page 12, 13)  
EXT BATT jack ( page 12, 13)  
OPEN switch ( page 11, 15)  
(play/pause)* button ( page 15-17,  
19, 21-23)  
CD Player:  
(stop)/CHG button ( page 11, 16)  
Remote:  
(stop) button ( page 16, 23, 24, 26)  
OPR (Operation) lamp ( page 11, 12,  
15, 17)  
Remote  
(headphones)/LINE OUT jack ( page  
15, 29)  
DC IN 3V jack ( page 11, 14)  
Operation dial ( page 16, 17, 21-23, 25)  
SEARCH button ( page 17)  
Function button ( page 18, 19, 22, 23,  
25)  
Function dial ( page 18, 19, 22, 23, 25)  
Clip ( page 8)  
* This button has a tactile dot.  
Continued  
9
 
 
Remote display  
Disc indicator ( page 15)  
Character information display ( page 18)  
Play mode indicator ( page 20-22)  
Sound indicator ( page 23)  
Battery indicator ( page 11, 13)  
Group indicator ( page 20, 21)  
Play list indicator ( page 20, 21)  
Bookmark indicator ( page 20, 21)  
10  
 
Connect the AC power adaptor to  
the DC IN 3 V jack of your CD player  
and an AC outlet, then press /CHG  
to start charging.  
The OPR lamp on the CD player flashes,  
then lights up.  
4
Preparing a Power Source  
(Rechargeable Battery)  
Charge the rechargeable battery before using  
it for the first time or when it is depleted.  
To maintain the original battery capacity  
longer, charge the battery only when it is  
completely depleted (“Lo Batt” appears on  
the display).  
When the remote is connected,  
“Charging” flashes and the indicator  
sections of  
(battery) light up in  
succession in the remote display.  
Slide the OPEN switch to open the  
lid of your player.  
to an AC outlet  
1
AC power adaptor  
OPR lamp  
OPEN switch  
Open the battery compartment lid  
inside the player.  
2
to DC IN 3 V  
Raise  
Battery  
compart-  
ment lid  
/CHG  
Press  
Insert the NH-14WM rechargeable  
3
battery (supplied) matching the  
end of the battery to the   
diagram in the battery compartment  
and close the lids of the battery  
compartment and the player until  
they click into place.  
When the battery is completely charged,  
the OPR lamp goes off and “Charging”  
disappears.  
Continued  
Insert the   
end first.  
11  
 
 
Notes  
When using a dry battery  
• Do not charge any rechargeable battery other  
than an NH-14WM (supplied) or NH-10WM (not  
supplied) using this AC power adaptor.  
You can extend the power available by using  
a dry battery, together with a rechargeable  
battery by attaching the external battery case.  
Make sure to remove the AC power adaptor  
when attaching the external battery case.  
The battery in the player and that in  
the external battery case are discharged  
simultaneously.  
• If you press during charging, charging stops  
and playback of the CD starts.  
• If you connect the AC power adaptor to the player  
during playback, play stops.  
• During charging, the player and the rechargeable  
battery become hot. This poses no danger.  
• Take out the rechargeable battery when the player  
is not to be used for a long time.  
Notes  
• When using the rechargeable battery and dry  
battery together to extend power, use a fully  
To remove the rechargeable battery  
Push the end of the rechargeable battery.  
charged rechargeable battery and new dry battery.  
• When you use the CD player on battery power,  
use an alkaline battery only. If you use any other  
type of battery, the player may not give its full  
performance. A decrease in battery life, etc. may  
occur.  
Insert an LR6 (size AA) alkaline  
1
battery (not supplied) by matching  
the to the diagram inside the  
battery case and close the battery  
case lid.  
Note on the useful life of the rechargeable  
battery and when to replace it  
If the battery is new or has not been used for a  
long time, it may not charge completely.  
In that case, charge it until the OPR lamp  
goes off and then use the player until  
the battery is completely depleted (“Lo  
Batt” appears on the display). Repeat this  
procedure several times.  
When the battery life is still shorter by about  
half of a normal charge after trying this  
procedure, replace the battery with a new  
rechargeable battery.  
Attach the battery case to the player  
2
securely and fasten the screw in  
the direction of LOCK. Connect the  
battery case to EXT BATT jack.  
Note on carrying the rechargeable battery  
Use the supplied battery carrying case to  
protect against unexpected heat. If the  
rechargeable battery comes into contact with  
the metallic objects, heat or fire may occur  
due to a short circuit.  
12  
 
 
To remove the external battery case  
Battery life 1)  
Unfasten the screw in the direction of  
RELEASE. Then, disconnect the battery case  
from EXT BATT jack.  
When using one NH-14WM rechargeable  
battery (charged for about 5 hours 2)  
)
G-PROTECTION  
“1”  
16  
40  
26  
“2”  
14  
Audio CD  
ATRAC CD 3)  
MP3 CD 4)  
40  
26  
When using the external battery case (one  
alkaline battery 5)  
)
Checking the remaining  
power of the battery  
G-PROTECTION  
“1”  
24  
61  
41  
The remaining power of the battery is  
indicated in the display as shown below. As  
the black indicator section decreases, the  
remaining power is depleted further.  
“2”  
21  
Audio CD  
ATRAC CD 3)  
MP3 CD 4)  
61  
41  
When using one NH-14WM rechargeable  
battery and the external battery case (one  
“Lo Batt” *  
alkaline battery 5)  
)
* Beep sounds.  
G-PROTECTION  
“1”  
When the battery is depleted, charge the  
rechargeable battery or replace the dry battery  
with a new one.  
“2”  
38  
42  
105  
73  
Audio CD  
ATRAC CD 3)  
MP3 CD 4)  
105  
73  
Notes  
• The display shows the approximate battery power  
remaining. For example, one section does not  
always indicate one-fourth of the battery power.  
1)Measured value using the JEITA (Japan  
Electronics and Information Technology Industries  
Association)  
Playing time shown is approximate hours, when  
you use the player on a flat and stable surface and  
• Depending on the operating conditions, the display  
may increase or decrease relative to the actual  
power remaining.  
“POWER SAVE” is set to “2” ( page 27). This  
value varies depending on how the player is used.  
2)Charging time varies depending on how the  
rechargeable battery is used.  
3)Recorded at 48 kbps  
4)Recorded at 128 kbps  
5)When using a Sony LR6 (SG) alkaline battery  
(produced in Japan)  
Continued  
13  
 
 
Notes on rechargeable batteries and dry  
batteries  
When using the AC power  
adaptor  
• Do not charge dry batteries.  
You can use the player powered by the AC  
power adaptor without battery.  
• Do not throw the batteries into a fire.  
• Do not carry batteries in a pocket, etc. with coins  
or other metallic objects. The battery can generate  
heat if its positive and negative terminals are  
accidentally allowed to come into contact with a  
metallic object.  
to an AC outlet  
AC power adaptor  
• Do not mix rechargeable batteries with dry  
batteries.  
• Do not mix new batteries with old ones.  
• Do not use different types of batteries together.  
• When the batteries are not to be used for a long  
time, remove them.  
• If battery leakage occurs, wipe off any deposit  
left in the battery compartment, and install new  
batteries. If the deposit adheres to your skin, wash  
it off thoroughly.  
to DC IN 3V  
Connect the AC power adaptor to  
the DC IN 3V jack of your CD player  
and an AC outlet.  
1
Notes on the AC power adaptor  
• Disconnect all power sources when the player is  
not to be used for a long time.  
• Use only the AC power adaptor supplied. If your  
player is not supplied with an AC power adaptor,  
use an AC-E30HG AC power adaptor*. Do not  
use any other AC power adaptor. It may cause a  
malfunction.  
*Not available in Australia and some other  
regions. Ask your dealer for detailed  
information.  
Polarity of the plug  
• Do not touch the AC power adaptor with wet  
hands.  
• Connect the AC power adaptor to an easily  
accessible AC outlet. Should you notice an  
abnormality in the AC power adaptor, disconnect it  
from the AC outlet immediately.  
14  
 
 
Playback  
Adjust the volume by turning the  
VOL +/– control on the remote.  
4
Playing a CD  
Slide the OPEN switch to open the  
player lid.  
1
VOL +/– control  
Connect the headphones with the remote  
to the player beforehand.  
On the CD player  
to   
(headphones)  
After placing the CD on the tray in step 2,  
press and adjust the volume by pressing  
VOL +/–.  
Headphones  
with the  
remote  
OPEN switch  
VOL +/–  
Place the CD on the tray and close  
the lid.  
2
3
Label side up  
To remove the CD  
Remove the CD while pressing the pivot in  
the center of the tray.  
The OPR lamp lights up repetitively in  
red, orange and green, in turn.  
Press on the remote.  
(disc) moves, and the player starts  
playback.  
Color of the OPR lamp changes according  
to the format type of the music source  
(
page 5) being played. Red: CD-DA  
format, Green: ATRAC format and  
Continued  
Orange: MP3 format.  
15  
 
 
Basic playback operations (Play, stop, search)  
Remote  
Operation dial  
, /  
button  
button  
To  
Operation on the remote (Operation on the player is in  
parentheses)  
Play  
Play from the first  
track  
From stop, press and hold until playback starts. (From stop, press  
and hold until playback starts.)  
Stop  
Pause/Resume play  
after pausing  
Press . (Press .)  
Stop playback  
Press (stop). (Press /CHG.)  
Search  
Find the beginning of  
the current track 1)  
Turn the operation dial toward once.  
(Press once.)  
Find the beginning of  
previous tracks 1)  
Turn the operation dial toward repeatedly.  
(Press repeatedly.)  
Find the beginning of  
the next track 1)  
Turn the operation dial toward once.  
(Press once.)  
Find the beginning of  
succeeding tracks 1)  
Turn the operation dial toward repeatedly.  
(Press repeatedly.)  
Go backwards  
quickly 1)  
Turn the operation dial toward and hold it.  
(Press and hold .)  
Go forward quickly 1)  
Turn the operation dial toward and hold it.  
(Press and hold .)  
Jump to succeeding  
groups2)  
Turn the operation dial toward repeatedly while you keep the dial  
pressed in the direction of  
.
(Press  
Turn the operation dial toward repeatedly while you keep the dial  
pressed in the direction of  
(group) + repeatedly.)  
Jump to previous  
groups2)  
.
(Press  
(group) – repeatedly.)  
1)You can operate during both play and pause.  
2)You can operate during play of a CD other than audio CDs.  
16  
 
 
Locking the controls  
Searching for Your  
Favorite Track/File  
(HOLD)  
You can prevent accidental button presses  
while carrying the player by locking the  
controls. The OPR lamp flashes if you press  
any button when the HOLD function on the  
player is activated.  
Searching by viewing a list  
of groups/files (List View)  
You can search for a track/file by checking  
the format type of the music source and the  
names of groups and files.  
Slide the HOLD switch on the  
remote or on the player (on the  
1
back) in the direction of the arrow.  
SEARCH  
You can use the HOLD function for the  
remote and the player separately. For  
example, even if the HOLD function on  
the player is activated, you can operate the  
player by using the remote unless you set  
HOLD on the remote to on, too.  
Press SEARCH on the remote.  
1
Turn the VOL +/– control to select a  
group, and then press .  
2
If you select a group on an MP3 CD, etc.  
by searching through all the directories,  
turn the operation dial toward or  
.  
HOLD  
To unlock the controls  
Slide the HOLD switch in the direction  
opposite to that of arrow.  
Turn the VOL +/– control to select a  
file, and then press .  
3
The file you have selected starts playing.  
Note  
Even if the HOLD function is working, “HOLD”  
will not appear on the display of the remote.  
To return to the previous screen  
Turn the operation dial on the remote toward  
, or turn the operation dial toward   
while you keep the dial pressed in the direction  
of .  
To cancel searching  
Press on the remote.  
Continued  
17  
 
 
Audio CD  
Checking CD information  
on the display  
Track number, elapsed playing time  
(Track name, artist name)1)  
You can check CD information on the display  
of the remote.  
Depending on the region in which you  
purchased your CD player, the default  
language may not be “ENGLISH.” Change  
Total number of the files on the CD, time  
remaining on the CD (Album name)1)  
the LANGUAGE setting, if necessary (  
page 26).  
When you are playing an MP3 CD containing  
files with an ID3 tag, ID3 tag information  
is displayed. (When there is no ID3 tag  
information, file name or group name is  
Animation screen  
displayed.) ( page 5)  
ATRAC CD/MP3 CD  
Notes  
File number, file name, artist name,  
elapsed playing time  
• The characters A-Z, a-z, 0-9, and _ can be  
displayed on this player.  
• Before playing a file, the player reads all file  
and group (or folder) information on the CD.  
“Reading” is displayed. Depending on the content  
of the CD, it may take some time to accomplish  
this reading.  
File number, album name,  
CODEC information 2)  
,
remaining time of the current file  
• If the file does not belong to any group, “MP3  
ROOT” appears on the display.  
To check information on the remote  
display  
Animation screen  
Align  
1)When you are playing an audio CD containing  
text informatin such as CD-TEXT, information in  
parentheses is displayed.  
Function button  
2)Bit rate and sampling frequencies are displayed.  
While an MP3 file made at VBR (variable bit rate)  
is being played, “VBR” appears on the display  
instead of a bit rate. In some cases, “VBR”  
appears halfway through playback, rather than  
from the beginning.  
Function dial  
Turn the function dial on the remote to select  
DSPL/MENU and press the function button  
repeatedly.  
18  
 
 
Changing Playback  
Options (PLAY MODE)  
You can use various playback options such  
as selecting songs you want to listen to, and  
playing songs in your favorite order.  
For details about playback options, see  
page 20.  
You can also play songs repeatedly using the  
playback options you choose (repeat play,  
page 22).  
Align  
Function button  
Function dial  
During play, turn the function dial  
1
on the remote to P MODE/ and  
press the function button repeatedly  
to select a playback option.  
The playback option you selected lights  
up or flashes.  
If the playback option flashes , press .  
To return to normal play  
Turn the function dial on the remote to  
P MODE/ and press the function button  
repeatedly until the playback option  
disappears.  
Continued  
19  
 
 
Playback options (PLAY MODE)  
Display on the remote  
Explanation  
All tracks on the CD are played in a track number order.  
For the ATRAC CD/MP3 CD, a playing order is different  
according to the setting of the “PLAY ORDER.”  
No indication  
All files in the selected group or all groups are played (ATRAC  
CD/MP3 CD only) ( page 21).  
The current track is played once.  
1
All tracks on the CD are played once in random order.  
All files in the selected group are played once in random order  
SHUF  
SHUF  
(ATRAC CD/MP3 CD only) ( page 21).  
Tracks to which Bookmarks have been added are played. The play  
of tracks with Bookmarks starts in track number order, not in the  
order you added the Bookmarks ( page 21).  
Tracks in the selected m3u play list* are played (MP3 CD only)  
(
page 21).  
The tracks you have played most frequently from the CD are  
played from the 10th to the first.  
a00  
Up to 32 tracks, which the player has automatically memorized as  
the most frequently played ones, are played in random order.  
a00 SHUF  
PGM  
Up to 64 tracks are played in your favorite order ( page 22).  
About the first 10 seconds of all tracks which follow the current  
track are played once. If you turn the function dial to select  
P MODE/ , and press the function button during INTRO play,  
you can listen to the current track to the end.  
INTRO  
*An m3u play list is a file in which an MP3 file playing order has been encoded. To use the play list function,  
record MP3 files on a CD-R/CD-RW using encoding software that supports the m3u format.  
You can play the top 8 lists (listed by file name) on your screen.  
20  
 
 
To remove Bookmarks  
Playing groups  
During play of a track with a Bookmark,  
press and hold on the remote until  
disappears.  
In step 1 of “Changing Playback  
1
Options (PLAY MODE)” (page 19),  
select “ ” or “ SHUF.”  
Notes  
• If you try to add Bookmarks to tracks on an 11th  
CD (on a 6th CD* when playing ATRAC CDs/  
MP3 CDs), the Bookmarks of the CD you played  
first will be erased.  
Turn the VOL +/– control to select a  
group.  
If you select a group on an MP3 CD, etc.  
by searching through all the directories,  
turn the operation dial toward or  
.  
2
• All Bookmarks stored in memory will be erased if  
you remove all power sources, or if you continue  
playing the player on the rechargeable battery  
while “Lo Batt” is displayed, without charging the  
battery.  
If you select a group within the same  
directory, turn the VOL +/– control.  
* When each CD has 513 tracks or more.  
Playing your favorite play  
lists (m3u play list play)  
Press for 2 seconds or more.  
The player starts playback of all files in  
the group you have selected.  
3
In the step 1 of “Changing Playback  
1
Note  
Options (PLAY MODE)” ( page 19),  
If the group has no tracks, or the group is located in  
the lowest directory level, “Invalid” appears on the  
display.  
select  
(play list).  
Turn the operation dial on the  
remote toward or to select  
a play list you want.  
2
3
Playing your favorite  
tracks (Bookmark play)  
Press .  
During play of the track to which  
1
you want to add a Bookmark, press  
and hold on the remote until  
flashes slowly.  
Continued  
If you want to add a Bookmark to  
two or more tracks, repeat step 1.  
2
You can add Bookmarks to up to 10 CDs  
for audio CDs (up to 99 tracks for each  
CD) and up to 5 CDs* for ATRAC CDs/  
MP3 CDs (up to 999 tracks for each CD).  
In the step 1 of “Changing Playback  
3
Options (PLAY MODE)” ( page 19),  
select (Bookmark).  
Press .  
4
21  
 
 
Playing tracks in your  
favorite order (PGM play)  
Playing tracks repeatedly  
(Repeat play)  
While the player stopped, turn the  
Turn the function dial on the remote  
1
1
function dial on the remote to select  
P MODE/ and press the function  
button repeatedly until “PGM”  
(program) flashes.  
to select P MODE/ and press the  
function button repeatedly to select  
the playback option you want to  
repeat ( page 20).  
Press and hold the function button  
2
until  
(repeat) appears.  
Playing order Track name or file name  
The playback option you have selected  
repeats.  
Turn the VOL +/– control to select a  
track, and then press and hold   
2
To return to normal play  
Turn the function dial on the remote to select  
P MODE/ , and then press and hold the  
until the display changes.  
When playing an ATRAC CD/MP3 CD:  
You can also select a file in another group  
by turning the operation dial toward   
or while you keep the dial pressed in  
function button until  
disappears.  
the direction of  
.
Repeat step 2 to select tracks in  
your favorite order.  
3
You can select up to 64 tracks.  
When you finish entering the 64th track,  
the track number selected first (audio  
CD)/file name (ATRAC CD/MP3 CD)  
appears on the display.  
If you select 65 tracks or more, the tracks  
selected first are erased one by one.  
Press .  
Playback starts in the selected order.  
4
To check the program  
1
While the player is stopped, turn the  
function dial on the remote to select  
P MODE/ and press the function button  
repeatedly until “PGM” flashes. Then,  
press and hold on the remote until the  
display changes.  
2
Whenever you press and hold on  
the remote until the display changes, the  
tracks are displayed in playing order.  
22  
 
 
Turn and hold the operation dial  
toward or for 2 seconds or  
more until the frequency range you  
want to set up appears.  
3
4
Changing Sound  
Quality  
For details about the setting of SOUND items,  
“Low” is displayed first.  
see  
page 24.  
There are 3 frequency ranges; “Low”  
(low range audio), “Mid” (middle range  
audio), and “Hi” (high range audio).  
Selecting the sound  
quality  
You can set up the “EQUALIZER” setting  
and/or “CLEARBASS” setting. If you set both  
at the same time, you can enjoy more bass  
sound along with the sound quality you want.  
Turn the operation dial toward   
or repeatedly to select the  
shape of the wave.  
There are 3 shapes stored in memory for  
each frequency range.  
Turn the function dial on the remote  
to select SOUND.  
1
Frequency range  
Press the function button  
repeatedly until “EQUALIZER” or  
“CLEARBASS” appears.  
2
Turn the VOL +/– control repeatedly  
to select the sound volume.  
5
The sound volume can be adjusted in 7  
Press .  
3
levels.  
Sound volume  
Turn the operation dial toward   
or to select the sound quality  
4
you want.  
Repeat steps 3 to 5 to make  
adjustment for the remaining 2  
frequency ranges.  
6
7
Press .  
5
Customizing sound quality  
Press .  
You can adjust sound quality for each  
frequency range individually, checking the  
shape of the wave on the display.  
To return to the previous screen  
Press on the remote.  
Turn the function dial on the remote  
1
to select SOUND, and then press  
the function button repeatedly until  
“EQUALIZER” appears and press  
.  
To cancel the adjustment operation  
Press on the remote for 2 seconds or more.  
Notes  
• If the sound is distorted by your sound settings  
when you turn up the volume, turn the volume  
down.  
Turn the operation dial toward  
or repeatedly to select  
“CUSTOM” and press .  
2
• If you feel a difference in sound volume between  
the “CUSTOM” sound setting and other sound  
settings, adjust the volume to your preference.  
Continued  
23  
 
 
SOUND items  
To return to the previous screen, press on the remote. To cancel the setting operation, press on  
the remote for 2 seconds or more.  
Item  
Options (: Default setting)  
Normal sound quality  
EQUALIZER  
(Equalizer setting)  
OFF  
SOFT  
For vocal, stressing middle range audio  
ACTIVE  
Lively sounds, emphasizing high and low range audio  
HEAVY  
Powerful sounds, further emphasizing high and low ranges  
compared with ACTIVE sound  
CUSTOM  
Customized sound (see  
Normal sound quality.  
page 23 for details)  
CLEARBASS  
(Bass sound  
setting)  
OFF  
BASS 1  
BASS 2  
BASS 3  
Emphasizing bass sound.  
Emphasizing bass sound more than BASS 1.  
Emphasizing bass sound more than BASS 2.  
Note  
If you change the setting of the EQUALIZER item after you have set the CLEARBASS item, the setting of the  
EQUALIZER item get priority.  
When you set both the EQUALIZER items and the CLEARBASS item, set the EQUALIZER item first.  
24  
 
 
Changing Optional  
Settings  
For details about the setting of OPTION  
items, see page 26.  
Setting various functions  
You can set the various functions such as the  
language for the menu and the playback order  
of the groups/files.  
Turn the function dial on the remote  
to DSPL/MENU, and then press and  
hold the function button.  
1
Turn the operation dial toward   
or to select the item you want to  
2
set up, and then press .  
Turn the operation dial toward   
or to select an option, and then  
3
press .  
When you are setting the “LANGUAGE”  
or “PLAY ORDER,” repeat step 3.  
Continued  
25  
 
 
OPTION items  
To return to the previous screen, press on the remote. To cancel the setting operation, press on  
the remote for 2 seconds or more.  
Items  
Options (: Default settings)  
Select the language for menu text, warning  
message, etc.  
LANGUAGE  
(Language for  
menu, etc.)  
MENU  
*
*
*
*
* D-NE830LS only  
TEXT1) 2)  
3)  
Select the language for CD-TEXT, ID3  
tag, etc.  
*
*
*
*
* D-NE830LS only  
G-PROTECTION 1) 4)  
(To prevent sound  
skipping)  
Protection against sound skipping is provided with high quality  
CD sound.  
1  
2
Enhanced protection against sound skipping is provided.  
The volume changes without limiting the volume level.  
AVLS 5)  
(Limiting volume)  
OFF  
ON  
The maximum volume is limited to protect your hearing.  
26  
 
 
Items  
Options (: Default settings)  
The timer does not work.  
TIMER  
(Off timer)  
OFF  
ON  
1-99 min  
At the preset time, “OFF TIMER” appears  
on the display for about 5 seconds, and the  
player automatically stops playback.  
Turn the VOL +/– control on the remote  
repeatedly to increase or decrease the length  
of time by 5 minutes, or keep turning the  
VOL +/– control to increase or decrease by  
1 minute. The default setting is “10 min.”  
AUDIO OUT 1)  
(External audio  
output)  
Select this when you connect the supplied headphones.  
HEADPHONE  
LINE OUT  
Select this when you connect other devices such as active  
speakers with an audio cord ( page 29).  
The beep sounds when you operate the player.  
BEEP  
(Sound of operation)  
ON  
OFF  
The beep is turned off.  
6)  
SEAMLESS 1)  
The CD is played as recorded on the disc, including spaces  
between tracks.  
OFF  
(Playing tracks  
continuously)  
ON  
The CD is played without space between tracks.  
POWER SAVE 1)  
(The LCD backlight  
on the remote and  
the OPR lamp on  
the player)  
On the remote, the display lights up for about 10 seconds, then  
turns off. The OPR lamp on the player remains lit.  
OFF  
1
2
Neither the display on the remote nor the OPR lamp on the CD  
player lights up.  
Neither the display on the remote nor the OPR lamp on the CD  
player lights up. Furthermore, the SOUND settings are not  
effective.  
7)  
PLAY ORDER 1)  
TRACK  
Play back the music source in the order of  
recording.  
NORMAL  
(Playback order)  
ID3TAG TNO  
FILE NAME  
Play back in the order of ID3 tag number.  
Play back in the alphabetical order of the  
file names.  
GROUP  
Play back the music source in the order of  
recording.  
OFF  
ON  
Play back the music source in the order of  
group names.  
The characters appear on the display in the normal direction.  
DIRECTION  
(Inverting the  
characters on the  
display)  
NORMAL  
REVERSE  
The characters appear on the display in the reverse direction so  
that you can read them from the opposite side. When you set  
the CUSTOM items of the EQUALIZER settings or when you  
search for the track/file using the List View function, VOL +/– on  
the remote operate in an opposite way.  
8)  
CD-EXTRA 1)  
Set to “OFF” as long as you can play your CD normally.  
OFF  
(Playback by disc  
format)  
ON  
If you cannot play your CD-Extra, set to “ON.” You may play it.  
Continued  
27  
 
Items  
Options (: Default settings)  
The ordinary playback screen is displayed when you have not  
used any controls for a specified period of time.  
ANIMATION  
OFF  
(Selecting  
animation screen)  
ON  
Animation screen appears when you have not used any controls  
for a specified period of time.  
1)You can set this up only while the player is stopped.  
2)The TEXT option cannot be set for Audio CDs. For CD-Extra CDs, you can select the TEXT option when  
“CD-EXTRA” is set to “ON.”  
3)The item “AUTO” is displayed in the same language that you selected for the “LANGUAGE” - “MENU”  
options.  
4)Depending on the model you purchased, “G-PRO” is displayed on the remote.  
5)AVLS is an abbreviation for the Automatic Volume Limiter System.  
6)This function works only for ATRAC CDs.  
7)This function does not work for Audio CDs.  
8)This function works only for Audio CDs and CD-Extra CDs.  
Notes  
• Even if “G-PROTECTION” is set to “2,” sound may skip:  
– when the CD player receives stronger continuous shock than expected,  
– when a dirty or scratched CD is played, or  
– for CD-Rs/CD-RWs, when a poor-quality disc is played or there is a problem with the original recording  
device or application software.  
• Even if “SEAMLESS” is set to “ON,” the tracks may not play continuously depending on how the source  
music was recorded.  
28  
 
Connected device  
Headphones  
Setting  
HEADPHONE  
Connecting Other  
Devices  
LINE OUT  
Device connected using  
the connecting cord  
You can listen to CDs through a stereo system  
and record CDs on a cassette tape. See the  
instruction manual that comes with the device  
you want to connect.  
Be sure to turn off all devices before making  
the connections and changing the settings  
explained below.  
When you connect another device, set this  
to “LINE OUT.” When the setting is “LINE  
OUT,” volume cannot be adjusted using  
either the player or the remote, and the sound  
function does not work.  
Notes  
• Before you play a CD, turn down the volume  
of the connected device to avoid damaging the  
connected speaker.  
• Use the AC power adaptor for recording. If you  
use the rechargeable battery or a dry battery as a  
power source, the battery may become completely  
depleted in the middle of recording.  
to   
(headphones)/  
LINE OUT  
• To record high quality CD sound, set  
“G-PRO (G-PROTECTION)” to “1.”  
Connecting cord  
(minijack, not  
supplied)  
Left (white)  
Right (red)  
AV amplifier, active  
speaker, cassette  
recorder, etc.  
You need to change the setting for “AUDIO  
OUT” so that sound is output to the connected  
device. The settings of “AUDIO OUT” are  
shown below. To make those settings, see  
page 25, 27.  
29  
 
 
Additional Information  
Troubleshooting  
Should any problem persist after you have checked these symptoms, consult your nearest Sony  
dealer.  
Power  
Symptom  
Cause and/or corrective action  
The rechargeable battery cannot  
be charged.  
The rechargeable battery is not inserted in the battery  
compartment. Insert the rechargeable battery ( page 11).  
/CHG is not pressed. Connect the AC power adaptor and  
press /CHG.  
The CD is playing. Turn it off ( page 16).  
Sound  
Symptom  
Cause and/or corrective action  
The volume does not increase  
even if you turn the VOL +/–  
control on the remote in the +  
direction repeatedly (even if you  
press VOL + repeatedly on the  
player).  
“AVLS” is set to “ON.” Set it to “OFF” ( page 26).  
“AUDIO OUT” is set to “LINE OUT.” Set it to  
“HEADPHONE” ( page 29).  
No sound, or noise is heard.  
Connect the headphones plugs firmly.  
The plugs are dirty. Clean the headphones plugs with a dry soft  
cloth periodically.  
The volume cannot be adjusted.  
“AUDIO OUT” is set to “LINE OUT.” Set “AUDIO OUT” to  
“HEADPHONE” ( page 29). When adjust the volume using  
the volume control on the connected device, set “AUDIO OUT”  
to “LINE OUT” ( page 29).  
A rustling noise is heard from  
the CD.  
Close the lid of the battery compartment firmly ( page 11).  
When using the player with a  
stereo system connected, the  
sound is distorted or noisy.  
“AUDIO OUT” is set to “HEADPHONE.” Set “AUDIO OUT”  
to “LINE OUT” ( page 29).  
EQUALIZER items cannot be set  
up.  
“POWER SAVE” is set to “2” ( page 27).  
30  
 
 
Operation/Playback  
Symptom  
Cause and/or corrective action  
The playing time is too short. The  
CD does not play.  
Check that you are using an alkaline battery and not a  
manganese battery.  
Replace the dry battery with a new LR6 (size AA) alkaline  
battery ( page 12).  
Charge and discharge the rechargeable battery several times  
(
page 12).  
Certain tracks cannot be played.  
You tried to play files saved in a format that is not compatible  
with this player ( page 5).  
Change the setting of “CD-EXTRA.” You may play your CD  
(
page 27).  
“Lo Batt” appears on the display,  
and the CD does not play.  
The rechargeable battery is used up completely. Charge the  
battery ( page 11).  
Replace the dry battery with a new LR6 (size AA) alkaline  
battery ( page 12).  
“Hi DC in” appears on the display.  
An AC power adaptor which is rated higher than the one  
supplied or recommended is being used. Use only the supplied  
AC power adaptor or the car battery cord recommended in  
“Optional Accessories” ( page 35).  
The CD does not play, or “No Disc”  
appears on the display when a CD  
is placed in the player.  
The CD is dirty or defective. Clean it or change it.  
Check that the CD is inserted with the label side up  
(
page 15).  
Moisture condensation* has occurred. Leave the CD player  
aside for several hours until the moisture evaporates.  
* Moisture is likely to condense on the lense inside the CD player  
when you bring the player from the cold outdoors into the warm  
indoors.  
Close the lid of the battery compartment firmly ( page 11).  
Make sure the battery is inserted correctly ( page 11, 12).  
Connect the AC power adaptor to an AC outlet securely  
(
page 14).  
Press after one second or more has passed since the AC  
power adaptor was connected.  
The CD-R/CD-RW in the player is blank.  
There is a problem with the quality of the CD-R/CD-RW,  
recording device, or application software.  
The OPR lamp flashes on the  
player when you press a button,  
and the CD does not play.  
The buttons are locked. Slide the HOLD switch back  
(
page 17).  
Continued  
31  
 
Symptom  
Cause and/or corrective action  
Playback starts from the point you  
stopped (resume function).  
The resume function is working. To start play from the first  
track, press while the player is stopped until the first track  
starts playing ( page 16), or open the lid of the player. Or,  
remove all power sources, and then insert the battery or connect  
the AC power adaptor again.  
During playback of an ATRAC  
CD or MP3 CD, the CD does not  
rotate but you can hear the sound  
normally.  
This player is designed to stop the rotation of an ATRAC CD  
or MP3 CD during playback to reduce the power consumption.  
The player is not malfunctioning.  
“No File” appears on the display  
after you press or when the lid  
of the player is closed.  
There are no ATRAC/MP3 files on the CD-R/CD-RW.  
A CD-R/CD-RW from which the data has been erased is being  
used.  
The CD is dirty.  
The LCD display becomes hard to  
see or slows down.  
You are using your CD player at high temperatures (above  
40°C/104°F) or at low temperatures (below 0°C/32°F). At  
room temperature, the display will return to its normal  
operating condition.  
is flashing quickly on the  
display of the remote control, and  
you cannot locate the beginning  
of the track or a specific point in  
the track.  
The CD player has entered the preparation stage of Bookmark  
play. Change the PLAY MODE setting to normal play (no  
display) ( page 20).  
Even though you have not selected  
If you have selected a playback option other than Bookmark  
Bookmark play,  
flashes.  
(Bookmark)  
play,  
(Bookmark) flashes.  
Play stopped abruptly.  
The off timer has been set. Change the setting of “TIMER” to  
“OFF” ( page 27).  
The rechargeable battery or the dry battery is used up  
completely. Charge the rechargeable battery ( page 11),  
or replace the dry battery with a new LR6 (size AA) alkaline  
battery ( page 12).  
32  
 
Others  
Symptom  
Cause and/or corrective action  
When closing the lid of the CD  
player, the CD starts to rotate.  
The player is reading the information on the CD, not  
malfunctioning.  
You cannot operate the CD player  
properly using the remote.  
The buttons on the player are kept pressed by mistake.  
The remote is not connected securely.  
33  
 
Maintenance  
Specifications  
To clean the casing  
System  
Compact disc digital audio system  
Use a soft cloth slightly moistened in water or  
a mild detergent solution. Do not use alcohol,  
benzine or thinner.  
Laser diode properties  
Emission duration: Continuous  
Laser output: Less than 44.6 µW  
(This output is the value measured at a distance  
of 200 mm from the objective lens surface on the  
optical pick-up block with 7 mm aperture.)  
D-A conversion  
1-bit quartz time-axis control  
Frequency response  
+1  
20 - 20 000 Hz dB (measured by JEITA)  
–2  
Output  
Line output (stereo minijack)  
Output level 0.7 V rms at 47 k  
Recommended load impedance over 10 kΩ  
Headphones (stereo minijack)  
Approx. 5 mW + Approx. 5 mW at 16 Ω  
(Approx. 1 mW + Approx. 1 mW at 16 )*  
*For the area code “EU8” model.  
For the area code of the model you purchased,  
check the upper left side of the bar code on the  
package.  
Power requirements  
• Sony NH-14WM rechargeable battery:  
1.2 V DC × 1  
• LR6 (size AA) battery: 1.5 V DC × 1  
• AC power adaptor (DC IN 3 V jack):  
220 V, 50 Hz (Model for China)  
120 V, 60 Hz (Model for Mexico)  
• Rated current: 1 A  
Operating temperature  
5°C - 35°C (41°F - 95°F)  
Dimensions (w/h/d) (excluding projecting parts  
and controls)  
Approx. 135.8 × 17.0 × 135.8 mm  
11  
(5 3  
8
×
× 5 3  
8 in.)  
16  
Mass (excluding accessories)  
Approx. 176 g (6.3 oz.)  
US and foreign patents licensed from Dolby  
Laboratories.  
MPEG Layer-3 audio coding technology and patents  
licensed from Fraunhofer IIS and Thomson.  
Design and specifications are subject to change  
without notice.  
34  
 
 
Optional Accessories  
SonicStage Download  
Website  
AC-E30HG*  
AC power adaptor  
SRS-Z30/Z31  
SRS-Z510  
Active speaker system  
You can install SonicStage by the  
following;  
1 Select from below your region website.  
2 Access the SonicStage free download  
website and download following the  
instructions provided.  
(Before downloading please read carefully  
the information provided on the site.)  
DCC-E345  
Car battery cord  
DCC-E34CP  
Car battery cord with car  
connecting pack  
CPA-9C  
Car connecting pack  
Connecting cord  
RK-G129  
RK-G136  
MDR-EX51LP  
MDR-EX71SL  
MDR-G74SL  
Earphones (except for the  
customers in France)  
3 Download the file, and execute according to  
the instructions.  
MDR-E0931SP  
Earphones (for the  
customers in France)  
For customers in Asia, the Middle East,  
Africa and Oceania:  
* Specifications for AC power adaptors vary for each  
area. Check your local voltage and the shape of the  
plug before purchasing.  
(TOP page  
Downloads  
Personal  
Audio  
SonicStage)  
For customers in Europe:  
(Top page ATRAC CD SonicStage)  
For customers with Overseas Models:  
support  
Your dealer may not handle some of the  
accessories listed above. Please ask the  
dealer for detailed information about the  
accessories in your country/region.  
(TOP page  
Service)  
SonicStage Download  
35  
 
 
E
EQUALIZER 23, 24  
Index  
External battery case 8, 12  
Symbols  
G
(Battery) 11, 13  
G-PROTECTION 26  
GROUP 27  
Group 6, 21  
(Disc) 15  
1
a00 20  
H
a00 SHUF 20  
(Bookmark) 20, 21  
(Group) 20  
HEADPHONE 27, 29  
Headphones  
HEAVY 24  
PGM 20, 22  
(Play list) 20, 21  
SHUF 20  
HOLD function 17  
I
(Repeat) 22  
ID3 tag 18  
INTRO 20  
A
ACTIVE 24  
L
AC power adaptor  
LANGUAGE 26  
LINE OUT 27, 29  
List View 17  
ANIMATION 28  
ATRAC  
ATRAC CD  
M
AUDIO OUT 27, 29  
AVLS 26  
m3u play list play 20, 21  
MENU 26  
B
Mix-Mode CD  
Battery carrying case  
MP3 CD  
Battery compartment lid 11  
Battery life 13  
O
Optional Accessories 35  
BEEP 27  
Bookmark 21  
P
Pause 16  
C
Play 16  
CD-DA format  
PLAY MODE 19  
PLAY ORDER 27  
POWER SAVE 27  
CD-EXTRA 27  
CD-Extra  
CD-TEXT 18  
CLEARBASS 23, 24  
R
Clip on the remote  
CUSTOM 24  
Rechargeable battery 8, 11  
Remote control  
Remote display 10, 18  
Repeat play 22  
D
DIRECTION 27  
36  
 
 
S
SEAMLESS 27  
Search 16, 17  
SOFT 24  
SonicStage  
SOUND 24  
Stop 16  
T
TEXT 26  
TIMER 27  
TRACK 27  
37  
 
 
 
Printed on 100 % recycled paper.  
Sony Corporation Printed in Malaysia  
 

Sennheiser Headphones RS 45 User Manual
Sennheiser Microphone MKH 8060 User Manual
Sharp CRT Television 27C540 User Manual
Snapper Utility Vehicle 63151 User Manual
Sony Cell Phone CMD J26 User Manual
Specialized Bicycle Accessories RH Dropout User Manual
Star Manufacturing Electric Steamer FSFD User Manual
Sterling Model Vehicle 6828810700 User Manual
Stoelting Freezer SO318 User Manual
Subaru Automobile Alarm H7110LS200 User Manual