Sony Stereo System CMT GS10 User Manual

Disposal of Old Electrical & Electronic  
Equipment  
(Applicable in the European Union and  
other European countries with separate  
collection systems)  
Basic Operations  
2-899-568-13(1)  
Adjusting the sound  
Listening to the radio  
is symbol on the product or on its packaging indicates  
that this product shall not be treated as household  
waste. Instead it shall be handed over to the applicable  
collection point for the recycling of electrical and  
electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential  
negative consequences for the environment and human  
health, which could otherwise be caused by inappropriate  
waste handling of this product. e recycling of materials  
will help to conserve natural resources. For more detailed  
information about recycling of this product, please  
contact your local Civic Office, your household waste  
disposal service or the shop where you purchased the  
product.  
Micro HI-FI  
1
Select “FMor “AM.”  
Press TUNER/BAND  
To adjust the volume  
repeatedly.  
Press VOLUME +/on the remote (or turn the  
Component System  
Operating Instructions  
VOLUME control on the unit)  
.
2
Select the tuning mode.  
Press TUNING MODE  
appears.  
repeatedly until AUTO”  
To add a sound effect  
To  
Generate a more dynamic  
sound (Dynamic Sound  
Generator X-tra)  
GB  
Press  
DSGX  
3
Tune in the desired station.  
on the unit.  
Press +/on the remote (or TUNING + or on the  
unit) . Scanning stops automatically when a station  
is tuned in, and then “TUNED” and “STEREO” (for  
stereo programs only) appear.  
.
Set the sound effect  
EQ  
Applicable accessories: Remote commander  
Playing a CD/MP3 disc  
Note on DualDiscs  
To stop automatic scanning  
1
Select the CD function.  
A DualDisc is a two sided disc product which mates  
DVD recorded material on one side with digital  
audio material on the other side. However, since the  
audio material side does not conform to the Compact  
Disc (CD) standard, playback on this product is not  
guaranteed.  
Press (stop)  
.
Press CD on the remote (or FUNCTION on the  
.
remote repeatedly)  
To tune in a station with a weak signal  
If “TUNED” does not appear and the scanning does  
CMT-GS10  
© 2007 Sony Corporation Printed in China  
2
Place a disc.  
Press (open/close)  
with the label side up on the disc tray.  
not stop, press TUNING MODE  
repeatedly until  
on the unit, and place a disc  
“MANUALappears and press +/on the remote (or  
TUNING + or on the unit)  
the desired station.  
repeatedly to tune in  
Music discs encoded with copyright  
Except for customers in the U.S.A.  
and Canada  
protection technologies  
To reduce static noise on a weak FM stereo  
station  
WARNING  
is product is designed to playback discs that conform  
to the Compact Disc (CD) standard. Recently, various  
music discs encoded with copyright protection  
technologies are marketed by some record companies.  
Please be aware that among those discs, there are some  
that do not conform to the CD standard and may not be  
playable by this product.  
Press FM MODE  
on the remote repeatedly until  
is appliance is classified  
as a CLASS 1 LASER  
product. is marking  
is located on the rear  
exterior.  
To reduce the risk of fire or electric shock,  
do not expose this apparatus to rain or  
moisture.  
“MONO” appears to turn off stereo reception.  
To close the disc tray, press (open/close)  
unit.  
Do not force the disc tray closed with your finger, as  
this may damage the unit.  
on the  
To reduce the risk of fire, do not cover the ventilation of  
the apparatus with newspapers, tablecloths, curtains, etc.  
And do not place lighted candles on the apparatus.  
Changing the display  
Notice for the customer in the  
To  
Press  
countries applying EU Directives  
e manufacturer of this product is Sony Corporation,  
1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. e  
Authorized Representative for EMC and product safety is  
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327  
Stuttgart, Germany. For any service or guarantee matters  
please refer to the addresses given in separate service or  
guarantee documents.  
MPEG Layer-3 audio coding technology and patents  
licensed from Fraunhofer IIS and omson.  
Change  
DISPLAY  
repeatedly when the  
when the system is  
To reduce the risk of fire or electric shock, do not place  
objects filled with liquids, such as vases, on the apparatus.  
3
Start playback.  
information on the system is on.  
Press (play) (or CD (play/pause) on the unit)  
display1)  
.
Connect the unit to an easily accessible AC outlet. Should  
you notice an abnormality in the unit, disconnect the  
main plug from the AC outlet immediately.  
Check the clock  
when the system  
is off  
DISPLAY  
off2). e clock is displayed for 8  
seconds.  
To  
Press  
Pause playback  
(pause) on the remote (or CD  
Do not install the appliance in a confined space, such as a  
bookcase or built-in cabinet.  
on the unit) . To resume  
1)For example, you can view CD/MP3 disc information, such as the  
track or file number or folder name during normal play, or the total  
play, press the button again.  
playing time while the player is stopped.  
e STANDBY indicator  
turned off.  
Do not expose the battery to excessive heat such as direct  
sunlight, fire or the like.  
Stop playback  
(stop)  
.
.
2)  
on the unit lights up when the system is  
Select a folder on an  
MP3 disc  
+/  
Notes on the display information  
e following are not displayed:  
CAUTION  
Select a track or file  
/
(go back/go forward)  
   
Before using the system  
e use of optical instruments with this product will  
increase eye hazard.  
on the remote (  
/
on the  
   
total playing time for a CD-DA disc depending on the play mode.  
total playing time for an MP3 disc.  
remaining playing time for a track and an MP3 file.  
e following are not displayed correctly:  
elapsed playing time of an MP3 file encoded using a VBR (variable  
bit rate).  
folder and file names that do not follow either the ISO9660  
Level 1, Level 2 or Joliet in the expansion format.  
e following are displayed:  
unit)  
.
To use the remote  
Find a point in a  
track or file  
Hold down  
/
(rewind/  
   
Slide and remove the battery compartment lid , and  
insert the two R6 (size AA) batteries (supplied), side  
first, matching the polarities shown below.  
fast forward)  
during playback,  
and release the button at the  
desired point.  
Select Repeat Play  
REPEAT  
repeatedly until “REP” or “REP1”  
appears.  
on the remote  
Hooking up the system securely  
ID3 tag information for MP3 files when ID3 version 1 and version  
2 tags are used.  
up to 30 characters of ID3 tag information using uppercase letters  
(A to Z), numbers (0 to 9), and symbols (‘< > * + , / @ [ \ ] _).  
e characters may not be displayed correctly according to the  
character code.  
To change the play mode  
Press PLAY MODE  
stopped. You can select normal play (“  
files in the folder on the disc), shuffle play (“SHUF” or  
repeatedly while the player is  
FM lead antenna  
(Extend it horizontally.)  
for all MP3  
SHUF*”), or program play (“PGM”).  
* When playing a CD-DA disc,  
(SHUF) Play performs the same  
Notes on using the remote  
Using optional audio components  
operation as normal (shuffle) play.  
With normal use, the batteries should last for about six months.  
Do not mix an old battery with a new one or mix different types of  
batteries.  
Notes on Repeat Play  
To connect an optional headphones  
All tracks or files on a disc are played repeatedly up to five times.  
If you do not use the remote for a long period of time, remove the  
batteries to avoid damage from battery leakage and corrosion.  
Connect headphones to the PHONES jack  
unit.  
on the  
“REP1” indicates that a single track or file is repeated until you stop  
it.  
Antennas  
To set the clock  
Notes on playing MP3 discs  
To connect an optional component  
Find a location and an orientation that provide  
good reception, and then set up the antenna.  
Keep the antennas away from the speaker cords  
and the power cord to avoid picking up noise.  
Do not save other types of tracks or files or unnecessary folders on a  
1
Turn on the system.  
Press  (on/standby)  
Connect additional audio source components to the  
disc that has MP3 files.  
AUDIO IN jack  
on the unit using an analog audio  
.
Folders that have no MP3 files are skipped.  
MP3 files are played back in the order that they are recorded onto  
the disc.  
AM loop antenna  
cord (not supplied). Turn down the volume on the  
system, and then select the AUDIO IN function.  
2
Select the clock set mode.  
e system can only play MP3 files that have a file extension of  
.MP3.  
If there are files on the disc that have the .MP3” file extension,  
but that are not MP3 files, the unit may produce noise or may  
malfunction.  
e maximum number of:  
folders is 150 (including the root folder).  
MP3 files is 255.  
MP3 files and folders that can be contained on a single disc is 300.  
folder levels (the tree structure of files) is eight.  
Compatibility with all MP3 encoding/writing soſtware, recording  
device, and recording media cannot be guaranteed. Incompatible  
MP3 discs may produce noise or interrupted audio or may not play  
at all.  
Press CLOCK/TIMER SET  
on the remote. If the  
current mode appears on the display, press /  
on the remote repeatedly to select “CLOCK,” and  
then press ENTER  
on the remote.  
3
Set the time.  
Press /  
on the remote repeatedly to set  
Speakers  
the hour, and then press ENTER  
on the remote.  
Solid (Red/)  
Insert only the stripped  
portion of the cord.  
Use the same procedure to set the minutes.  
Left speaker  
e clock settings are lost when you disconnect the  
power cord or if a power failure occurs.  
Solid (Black/)  
To display the clock when the system is off, press  
DISPLAY . e clock is displayed for about 8  
Notes on playing multisession discs  
seconds.  
If the disc begins with a CD-DA (or MP3) session, it is recognized as  
a CD-DA (or MP3) disc, and other sessions are not played back.  
A disc with a mixed CD format is recognized as a CD-DA (audio)  
disc.  
Right speaker  
Speaker pads  
Selecting a music source  
Press the following buttons (or press FUNCTION  
the remote repeatedly).  
Attach the supplied speaker pads to the bottom of the  
speakers to prevent slipping.  
on  
To select  
CD  
Tuner  
Press  
CD  
on the remote.  
Power  
.
TUNER/BAND  
For models with a voltage selector, set VOLTAGE  
SELECTOR to the local power line voltage.  
Connect the power cord to a wall socket.  
If the plug does not fit the wall socket, detach the  
supplied plug adaptor (only for models equipped  
with an adaptor).  
Component (connected using AUDIO IN  
an audio cord)  
.
Wall socket  
 

Sennheiser Ventilation Hood EK3253 User Manual
Snapper Snow Blower 522E 522E 522E SS5220E ESS5220E User Manual
Snapper Snow Blower 10528 User Manual
Sony Car Stereo System XR CA430X User Manual
Sony CRT Television KV HF51P50 User Manual
Sony Home Theater System CMTBX5BT User Manual
Sony Projector VPL AW10 User Manual
Sony Stereo Receiver 3 227 586 15 User Manual
Stovax Indoor Fireplace P8119UC User Manual
Sunbeam Fryer DF4500 User Manual