Multi-Channel
Power Amplifiers
OWNERS MANUAL AND
INSTALLATION GUIDE
T
E
C
H
N
0
L
0
G
I
E
CONGRA TULA
You now awn a
Amplifier, handcrafted in the USA, it is the
of a unique
design and engineering philosophy.
To maximize the performance of your system, we recommend that you thoroughly acquaint
yourself with its capabilities and features. Please retain this manual and your
installation receipts for future
and
amplifiers are manufactured with the highest quality control standards. When
properly installed, they will provide you with many years of listening pleasure. Please record
the following information which will help protect your investment should your amplifier
need replacement
service
Sie sind
die
stoker
SOUNDSTREAM Endstufe.
Endstufe
Sie
mit den
Bitte
gut auf.
in den USA
fachgerechtem
den Fall.
Sie
hinweg
mit
Endstufe
auf:
Serial
Date of
Installation
Installation
CAUTION!
Prolonged listening at high /eve/s may result in hearing loss. Even though
‘your new Soundstream amplifier sounds better than anything you’ve ever
beard, exercise caution to prevent hearing damage.
ACHTUNG!
Langes
S o u n d s t r e a m
so//ten Sie
2
TABLE OF CONTENTS
ISH
Diagram
4
.............................................................
6
7
Diagram ........................................................
....... ................................ 8 9
..
Wiring Wiring Diagram
10
................. ........
Protection Circuitry Troubleshooting
..................... 11
..
.............................
Service
11
....................................................
..
Specifications
.
...................................... 18 21
.................
Sample Systems
....................................... 12 13
.............
Diagramm
Diagramm
14
......................................................
.............................................. 16 17
18
............................
Schutzschaltung &
....................... 19
Service.. .................................................
19
Daten
...........................................
Technische
....
. 18 21
...............................
...............
Beispielanlage..
3
TABL
E OF CONTENTS
ENGLISH
Diagram .............................................................
4 5
6 7
Diagram ............................................................
Wiring Wiring Diagram .............................................
8 9
Protection Circuitry Troubleshooting
.......................... 10
Service ...........................................................................
Specifications.. ...............................................................
Sample Systems ...........................................................
DEUTCH
11
11
18 21
Diagramm ......................................................
Diagramm ......................................................
..............................................
12 13
14 15
16 17
Schutzschaltung
Fehlerbehebung..
............................. 18
Service.. .........................................................................
Technische Daten ..........................................................
Beispielanlage ...............................................................
19
19
18 21
3
3 Channel Amplifier
4
1
2
3
Side
5
11
6
7
4
Key to
Connected to fuse or circuit breaker, then battery’s positive post.
1.
2. Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
3. Remote Remote turn-on input from the head unit. Accepts
Speaker Output Connections-Channels 1
Speaker Output Connections Sub Channels.
2.
4.
5.
6. Crossover Adjustment Pot
subwoofer low pass filter.
7. Input Level Variable from 40mV to
Crossover frequency setting for the
Channel.
8. Crossover Switch Select “IN” to use the amplifier’s internal high pass
filter, or “OUT” to bypass the internal
Crossover Adjustment Pot-Crossover frequency setting for the channels
2 high pass filter.
Input Level -Variable from
Inputs Right and left channel inputs for channels & 2 and the subwoofer.
12. LED Indicates amplifier power on.
9.
1
to
2.
10
5
l
5 Channel Amplifier
12
3
4
5
8
6
7
9
1011
12
13
16
17
18
6
Kev to
Connected to fuse or circuit breaker, then battery’s positive post.
Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
2.
Remote Remote turn-on input from the head unit. Accepts
Speaker Output Connections Channels 1 2.
Speaker Output Connections Sub Channels.
Speaker Output Connections Channels 3 4.
3.
4.
5.
6.
7.
8.
Inputs Right and left channel inputs for channels 1
Crossover Adjustment Pot Crossover frequency setting for the channels
2 high pass Crossover Switch Select “IN” the
amplifier’s internal low pass filter, or to use an external crossover.
2.
1
Crossover Adjustment Pot Crossover frequency setting for the
subwoofer low pass filter.
9.
LED Indicates amplifier power on.
Crossover Adjustment Pot Crossover frequency setting for the channels
11.
12.
3
4 high pass filter.
Right and
channel inputs for channels 1
2 and the subwoofer.
Channels 3
4
Select Switches to allow all channels to be driven
from 2 (CH 1 & 2) or 4 RCA inputs
Right and left channel inputs for channels 3 8 4.
Channels 1 2 Crossover Switch Select “IN” to use the amplifier’s
13.
14.
internal high pass filter.
‘“OUT” to bypass the internal crossover.
Input Level -Variable from
Input Level Variable from 40mV to
Input Level -Variable from
Channels 3 & 4 Crossover Switch Select “IN” to use the amplifier’s
internal high pass filter, or “OUT” bypass the internal crossover.
to
1
2.
Channel.
4.
15.
16.
17,
18
to
3
POWER AND GROUND
To assure maximum output from your amplifier, use high quality, low-loss power
and ground cables. Soundstream amplifiers incorporate gold-plated barrier
strips for maximum power transfer and protection from corrosion. The screw
terminals back out for use with spade ring terminals. Determine from the chart
below the minimum gauge power and ground wire for your application.
CIRCUIT BREAKERS/FUSES
EXTERNAL
Like all audio components, the Soundstream amplifiers must be fused near the
battery A fuse or circuit breaker must be located within
of the battery This
will prevent a fire in the event of a shorted cable. See the chart below to
determine the value of your battery Fuse/circuit breaker.
INTERNAL
The Soundstream amplifiers are fused internally with automotive-type fuses.
The fuse is accessible on the left side of the amplifier.
with a higher value than what is supplied.
damage and
Never replace the fuses
may in amplifier
(Continued on
Battery Fuse/
9)
Model
Amplifier Fuses
Circuit Breaker
(1) 30 amp automotive
40 amp
50 amp
(2) 20 amp automotive
REMOTE TURN-ON
Connect the “Remote” to the turn-on lead from the source unit. When
is received, the amplifier will turn on.
volts
SIGNAL CABLE
To guarantee optimum performance, use a high-quality cable that will be easy
to install and has minimal signal loss.
SPEAKER CABLE
Use a high quality, flexible, multi-strand cable for best performance and
longevity.
WIRING DIAGRAM
PROTECTION CIRCUITRY
Your
amplifier is protected against both overheating and short
circuits by means of the following circuits:
l
l
l
Main power supply fuses.
Speaker output protection.
A fail-safe thermal
circuit activating at WC.
NOTE:
experience blown
beyond the
damage your amplifier.
supply fuses, DO NOT
your warranty and may
so
TROUBLESHOOTING
CAUSE
PROBLEM
No sound and LED is not lit
. no power or ground at amp
. no remote turn-on signal
l
blown fuse “ear battery
. blown amp power supply fuse
Repeatedly blown amp fuse,
frequent activation of Thermal
Protection Circuit
check speaker
impedance may be less than 2
ohms stereo or 4 ohms mono
. speaker or leads may be shorted
l
verify adequate amplifier
ventilation
10
SERVICE
Your Soundstream amplifier is protected by a limited warranty. Please read the
enclosed warranty card.
SPECIFICATIONS
POWER OUTPUT
Power
Power
MODEL
2
ohms
4
ohms
0.1%
THD
Signal to Noise
Frequency Response
Stereo Separation
Damping
20 Hz to 20
0.5
200
100
2.5 V
Input Sensitivity
Input impedance
12 k ohms
CROSSOVER SPECIFICATIONS
High Pass: 12
60 240 Hz
Low Pass: 24
30 120 Hz
DIMENSIONS
12” W 5.5” D 1.75” H
15” W 5.5” D 1.75” H
1 1
|