USB 3.0/eSATA 4-Bay 3.5” SATA Hard
Drive Enclosure with UASP
S3540BU33E
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 05/20/2014
Table of Contents
Product Diagram ....................................................................................1
Front View.................................................................................................................................................... 1
Rear View...................................................................................................................................................... 2
Introduction............................................................................................3
Packaging Contents ................................................................................................................................. 3
System Requirements.............................................................................................................................. 3
Hardware Installation............................................................................4
How to Use ..............................................................................................7
Connecting the Hard Drive.................................................................................................................... 7
LED Indicator .............................................................................................................................................. 7
Disconnecting the Hard Drive.............................................................................................................. 7
Mac OS X ...................................................................................................................................................... 8
Initializing the Hard Drive ...................................................................................................................... 8
Technical Support ..................................................................................10
Warranty Information............................................................................10
Instruction Manual
i
Product Diagram
Front View
1
2
3
1. Front Panel
2. Power & Drive Activity LEDs
3. Power Button
Instruction Manual
1
Rear View
4
1
2
3
1. eSATA port
2. USB 3.0 port
3. Power adapter port
4. Drive Fan
Instruction Manual
2
Introduction
Packaging Contents
•
•
•
•
•
USB 3.0/eSATA 4-Bay 3.5”SATA Hard Drive Enclosure
eSATA Cable
USB 3.0 Cable
Universal Power Adapter (NA/UK/EU)
Instruction manual
System Requirements
•
1x Computer system with available USB 3.0 (5 Gbit/s) port/USB 2.0 port (480Mbps)
or eSATA port
Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8/8.1 (32/64-bit)
Apple® Mac® OS 9.x/10
Linux®
Google Chrome OS™
•
4x 3.5”SATA Hard Drive
Instruction Manual
3
Hardware Installation
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
1. Using a Phillips head screw driver (not included) remove the screw from the bottom
of the enclosure.
2. Slide the “front panel”upward toward the top of the enclosure.
Instruction Manual
4
3. Lift the panel off to reveal the drive bays.
4. Gently slide each of your 3.5”hard drives into a bay.
Instruction Manual
5
5. Place the front panl back on by placing it over the drive bay, and sliding it into place.
6. Replace the screw using the Phillips head screw driver.
7. If using eSATA, connect the the included eSATA cable from an available eSATA port
on your computer system to the eSATA port on the enclosure.
Note: For all 4 drives to be detected by your computer when connected via eSATA.
The eSATA port on your computer system must support Port Multiplier.
OR
If using USB, connect the the included USB 3.0 cable from an available USB port on
your computer system to the USB 3.0 port on the enclosure.
8. Turn on the unit, by Pushing the Power button on the front panel.
Instruction Manual
6
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, and powered on, your computer
system will automatically recognize the drive(s) and it will be accessible as though it
were installed in the system internally.
Note: If your computer fails to automatically recognize your drive it is likely your
drive has not been initialized or formatted correctly. (See Drive Initialization below for
further instructions.)
LED Indicator
The hard drive enclosure offers LED indicators for each drive, so you can monitor drive
activity. The LED will flash while the hard drive is being accessed. Do not remove the
enclosure from the host computer while the LED is flashing, as it could damage the
drive or the enclosure, resulting in data loss.
Disconnecting the Hard Drive
Windows
1. Select the “Safely remove Hardware and Eject Media”icon, located in the task bar.
2. Select the Mass Storage Device from the list that appears.
3. Wait for the message indicating that it is now safe to remove the device.
Note: Removing the connected drive prior to receiving notification that it is safe to
do so, could result in losing or corrupting data stored on the drive. Once the Safe
to Remove Hardware message appears, please disconnect the enclosure from the
computer by removing the USB connection.
Instruction Manual
7
Mac OS X
To safely disconnect the attached drive from the host computer, close any windows
listing the contents of the removable drive. Once all windows are closed, click on the
USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.
Allow 5 seconds before physically removing the enclosure/drive from the computer.
Initializing the Hard Drive
1. If the drive is new it may need to be initialized and formatted before use. From the
main Windows desktop, right-click on “My Computer”(“Computer”in Vista/ 7 / 8/
8.1), then select Manage. In the new Computer Management window, select Disk
Management from the left window panel.
2. A dialog window should automatically appear, asking you to initialize the drive.
Depending on the version of Windows, it will give you the option of either creating
an “MBR”or “GPT”disk. GPT (GUID partition) is required for drives larger than 2TB but
is not compatible with some older operating systems, while MBR is supported by
newer and older operating systems.
Instruction Manual
8
3. Once initialized, locate the Disk that says it is “Unallocated”(check the listed hard
drive capacity to confirm it’s the correct hard drive) and then right-click in the
section that says “Unallocated”and select “New Partition”.
4. Several on screen prompts will follow walking you through the steps to create the
partition. Follow these prompts to complete partition creation.
Instruction Manual
9
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
10
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|