SYLVANIA
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-
LCD TELEVISION
Owner’s
Manual
ship as follows:
6613LD
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
(13 INCH Photo Stand Type)
LABOR:
6615LD
(15 INCH Tilt Stand Type)
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-
UCT TO OBTAIN SERVICE UNDER THIS WARRANTY..
FEATURES
MTS/SAP Tuner
G
This warranty shall not be extended to any other person or transferee.
G
G
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if
service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any
the product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or
damage which results from fire, flood, lightning or other acts of God.
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-
ing system provides free and easy channel selection, and lets you tune directly to any channel
using the channel number buttons (0~9 and +100-key) on the remote control.
On-Screen Function Display
G
G
G
G
Full-Function Remote Control
Sleep Timer
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no
user operation for 15 minutes, the TV will turn itself off automatically.
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS
VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.
Component Input
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN
THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-
VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED
SERVICE FACILITY.
G
G
G
G
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS
COSTS WILL BE CHARGED.
PRECAUTIONS
IMPORTANT:
G
G
G
G
Place your TV in a room with adequate ventilation.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
Leave enough room for air to circulate around the bottom, top and back of the set.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
The serial number of this product may be found on the back of the TV. No others have the same
serial number as yours. You should record the number and other vital information here and retain
this book as a permanent record of your purchase to aid identification in case of theft.
WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or general service procedure,
please call 1-800-968-3429 or write to the following:
FUNAI CORPORATION
Customer Service
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
100 North Street; Teterboro, NJ 07608
Tel :1-800-968-3429
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
This Owner’s Manual is made of recycled paper.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE
0EMN02183
Printed in China
L0111UB / L0131UB * * * * *
PHOTO STAND / TILT STAND
Photo Stand (6613LD)
Tilt Stand (6615LD)
H
E
A
D
P
E
H
O
N
E
C
O
M
P
O
N
N
T
P
R
Adjust the stand to change the angle of TV.
Adjust the length of the stand in 2 types (long or short) to change
the angle of TV.
P
B
Y
A
V
O
-
I
N
2
R
L
A
U
D
I
P
O
W
E
T
R
S
-
V
I
D
E
O
V
A
O
V
D
E
N
O
1
L
A
U
D
I
O
R
I
N
P
U
D
C
1
2
V
-
I
A
N
T
.
CONNECTIONS
Note to CATV system installer:
VHF
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building as close to the point of cable entry
as practical.
Antenna
(Not supplied)
UHF
Antenna
ATTENTION:
(Not supplied)
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
*Some cable TV systems
use scrambled signals and
require a special converter
to receive these channels.
Consult your local cable
company.
(6615LD)
CATV Box *
or Satellite Box
(Not supplied)
#Do not use other AC adapter.
Otherwise, the TV may break down.
OR
FCC WARNING- This equipment may
generate or use radio frequency energy.
Changes or modifications to this equip-
ment may cause harmful interference
unless the modifications are expressly
approved in the instruction manual.
The user could lose the authority to
VHF/UHF Combiner
(Not supplied)
OUT
IN
From Cable System
or Satellite Antenna
75-ohm
AC adapter #
(Supplied)
AC cord
(Supplied)
Coaxial Cable
From household
AC outlet
75-ohm
Coaxial Cable
VHF/UHF
operate this equipment if an unautho-
rized change or modification is made.
Combination Antenna
(Not supplied)
OR
From Cable System
Use the supplied RF cable to connect to the “ANT.”in jack. Otherwise, the picture may become unclear.
CLOSED CAPTION
This TV can receive C1 and C2 Caption and Text.
Notes:
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or
text.
Caption Mode
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-
cast signal contains Caption Signals.
(2)Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters
will not be displayed.
(2)Captions and texts may not match the TV voice exactly.
(3)Interference may cause the closed caption system not to function properly.
(4)The caption or text characters will not be displayed while the menu display or functions dis-
play is shown.
(5)If you see this screen:
Text Mode
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select CAPTION C1, C2 or CAPTION [OFF].
(1)Displays the text on the screen by scrolling (max. 7 lines)
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.
PREPARATION FOR USE
3) Press the VOL(ume) L button so that "ADD/DELETE" is selected.
4) Use the CH(annel) L or M button to select the channel you wish to put
into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
ADD/DELETE
AUTO MEMO
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) L or M button to point to "[ENG]".
5) Select "ENG"(English), "ESP"(Spanish) or "FRA"(French)
by using the VOL(ume) L or M button.
Perform "ADD/DELETE" function while this display appears on the screen.
Press the VOL(ume) L or M button to light up the channel number
G
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) L or M button to light up the channel number
G
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
MTS (Multi-Channel Television Sound) System
6) Press the MENU button to exit the menu.
You can listen to a program in MTS stereo by following the steps below.
Menu
To show the status, press the
DISPLAY button on the remote
control.
Selection
CHANNEL PRESETTING
MAIN
MONO
SAP
Type of
NOTE:You MUST PRESET channels BEFORE using CHANNEL L or M button.
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
broadcast
-None-
-None-
MONO
MAIN
-None-
Regular
Stereo
broadcast
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
PICTURE
STEREO
STEREO
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) L or M button to point to "CHANNEL SET".
Then, press the VOL(ume) L button.
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
MAIN
SAP
SAP
[To Select STEREO, MONO or SAP in Stereo broadcast]
4) Press the CH(annel) L or M button to point to "AUTO MEMO".
Then, press the VOL(ume) L button.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) L or M button to point to "TV SOUND".
3) Press the VOL(ume) L or M button to select your desired stereo mode. ([MAIN], [MONO] or
[SAP])
ADD/DELETE
AUTO MEMO
The tuner scans and memorizes all active channels in your area.
G
G
G
G
The TV distinguishes between standard TV channels and cable (CATV)
channels.
When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.
When you press the CH(annel) L or M button after selecting AUTO MEMO,
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO MEMO action again when reception conditions are better.
: Press the VOL(ume) L or M button.
PICTURE
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [SAP]
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
CAPTION [ C1]
TV SOUND [MAIN]
TV SOUND [MONO]
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) L or M button to point to "CHANNEL SET".
Then, press the VOL(ume) L button.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) L or M button.
3) Adjust the volume to the desired listening level using the VOL(ume) L or M button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
VOL(ume)
VOL(ume)
display appears on the TV screen.
2) Press the VOL(ume) L button so that "PIC-
TURE" is selected.
3) Press the CH(annel) L or M button to select
“MANUAL”. Then, press the VOL(ume) L
button.
4) Select the feature you wish to adjust with
the CH(annel) L or M button and adjust it
with the VOL(ume) L or M button.
to decrease
brightness
to decrease
contrast
to increase
brightness
to increase
contrast
BRIGHT
CONTRAST
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
to pale
to brilliant
COLOR
to purple
to soft
to green
to clear
TINT
SHARPNESS
SLEEP 10
2) You may change the sleep time by pressing the SLEEP
: Press the CH(annel) L or M button.
button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
To cancel the sleep timer:
button is pushed. (The timer display counts up and sleep
Press the SLEEP button repeated-
timer will be displayed on the screen when you press the
ly until "SLEEP 0" is displayed.
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
BRIGHT
SHARPNESS
CONTRAST
COLOR
TINT
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
Note:
G
In the above steps, the picture adjustment display will disappear from the TV screen automati-
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)
L button so that "PICTURE" is selected. Then, press the CH(annel) L or M button repeatedly
until the display returns to the screen.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) L or M button to point
to "CAPTION".
3) Press the VOL(ume) L or M button to select
the mode you wish.
[USING THE GAME BUTTON]
You can set the Game mode and external input mode at the same time by pressing the GAME but-
ton on the remote control. “GAME” appears on the TV screen.
G
To exit the Game mode and external input mode, press the GAME button on the remote control
again.
4) When done, press the MENU button to exit
the menu.
: Press the VOL(ume) L or M button.
G
To cancel the Game mode only, adjust the picture control. In this case, “VIDEO1” instead of
“GAME” appears on the TV screen.
G
PICTURE
PICTURE
PICTURE
PICTURE
PICTURE
If you press the GAME button when the TV is off, the TV turns on and will be in the Game
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]
mode and external input mode automatically.
[
C1]
[
C2]
[
T1]
3) Press the CH(annel) L
or M button to point to
"MPAA RATING".
Then, press the
VOL(ume) L button.
4) Press the CH(annel) L
or M button to point to
your desired item.
3) Press the CH(annel) L
or M button to point to
"TV RATING". Then,
press the VOL(ume) L
button.
4) Press the CH(annel) L
or M button to point to
your desired item.
G
When you select [TV-Y7]:
Press the CH(annel) L
or M button to select
B TV RATING
MPAA RATING
TV RATING
B MPAA RATING
V-CHIP SET UP
TV-Y7
[BLOCK]
[BLOCK]
V-CHIP enables parents to prevent their chil-
dren from watching inappropriate material on
TV.
"FV" (Fantasy
B FV
Violence). Then, press
the VOL(ume) L button
to select [BLOCK] or
[VIEW].
V-CHIP reads the ratings for programming
(except for news and sports programs, unedit-
ed movies on premium cable channels, and
Emergency Broadcast System signals), then
denies access to programming if the program's
rating meets or exceeds the limitations you
select. In this case, "PROTECTED PRO-
GRAM by ..." message appears on the TV
screen.
B TV-Y
TV-Y7(
TV-G
TV-PG(
TV-14(
TV-MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
B G
PG
PG-13
R
NC-17
X
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
)
B TV-Y
TV-Y7(
TV-G
[VIEW]
[VIEW]
[BLOCK]
)
)
)
)
G
When you select [TV-
PG], [TV-14] or [TV-
MA]:
Then, press the
VOL(ume) L button to
select [BLOCK] or [VIEW].
Then, press the
VOL(ume) L button to
select [BLOCK] or [VIEW].
TV-PG(DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA( LSV) [BLOCK]
Press the CH(annel) L
or M button to select
"D" (Suggestive
<Selection>
• G:
<Rating Category Explanations>
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires
accompanying
<Selection>
Explanations>
• TV-Y:
<Rating Category
TV-PG
[BLOCK]
D
L
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
• PG:
Appropriate for all children
Appropriate for children seven and
older
• PG-13:
• R:
• TV-Y7:
Dialog), "L"(Coarse
Language), "S"(Sexual
Situation), or "V"
S
V
To block certain ratings, follow the steps
below.
• TV-G:
General Audience
parent or adult guardian
No one under 17 admitted
Mature audience only
• TV-PG:
• TV-14:
• TV-MA:
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
G
Programming may be rated by the Motion
Picture Association of America (MPAA) or
according to the Television Parental
Guidelines. In order to block any inappro-
priate programming, set your limits in both
places (MPAA RATING and TV RATING).
You cannot access the menu when the
"PROTECTED PROGRAM by ..." message
appears. In this case, change to an
• NC-17:
• X:
(Violence). Then, press the VOL(ume) L
button to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does
not appear on the TV screen.
The sub-ratings which set to [BLOCK]
appear next to the rating category in the TV
RATING menu.
G
When you select the rating category and
turn it to [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the
lower rating will turn [VIEW] automatically.
When you turn "G" to [BLOCK] or
G
When you select the rating category and turn
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
G
G
G
G
G
G
When you turn "TV-Y" to [BLOCK] or
[VIEW], then all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "TV-MA" to [VIEW], then
all ratings will turn to [VIEW] automatically.
[VIEW], the all ratings will turn to
unblocked channel, then press the MENU
button.
[BLOCK] or [VIEW] automatically.
When you turn "X" to [VIEW], then all rat-
ings will turn to [VIEW] automatically.
5) Press the MENU button to exit the menu.
5) Press the MENU button to exit the menu.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) L
[TV RATING SET UP]
[V-CHIP SET UP SUB RATINGS]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) L or M button to point
to "V-CHIP SET UP".
When you select TV-Y7, TV-PG, TV-14, or TV-
MA and you press the VOL(ume) L button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-
PG) and turn it to [BLOCK] or [VIEW], the
sub-ratings (example: V for Violence) will turn
[BLOCK] or [VIEW] automatically.
PICTURE
or M button to point to
CHANNEL SET
[ENG] / ESP / FRA
B V-CHIP SET UP
"V-CHIP SET UP".
Then, press the
VOL(ume) L button.
CAPTION
TV SOUND
[OFF]
[MAIN]
Then, press the VOL(ume) L button.
You can set the sub-ratings to [BLOCK] or
[VIEW] individually when the rating category
is set to [BLOCK]. To set the sub-ratings indi-
vidually, follow the steps below.
TROUBLESHOOTING GUIDE
MAINTENANCE
CABINET CLEANING
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
PICTURE SCREEN CLEANING
G
Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
If the liquid crystal display panel should
require cleaning, wipe it with a cotton or soft
cloth. Before cleaning the picture screen, dis-
connect the power cord.
G
Never use a solvent or alcohol. Do not spray
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
SUPPLIED ACCESSORIES
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
AC cord
Remote control unit
Is TV’s POWER button on?
AC adapter
RF cable
Owner’s Manual
(NE122UD)
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Batteries ("AA" x 2)
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
Temperature around is too low.
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.
It is quality of the LCD Panel.
OTHER SPECIFICATIONS
Television system:
NTSC-M
Remote control:
Digital encoded
TV Standard
infrared light system
Closed Caption System: §15.119/FCC
Channel coverage
Operating temperature: 5°C to 40°C (41°F~104°F)
Closed Caption Problem
Possible Remedy
Power requirements:
DC12V
My TV is showing captions that are
misspelled.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
VHF:
UHF:
CATV:
2 ~ 13
14 ~ 69
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
Power consumption(Maximum): 41W(6613LD)
44W(6615LD)
LCD:
13"(6613LD)
15"(6615LD)
6613LD
Dimensions(H x W x D):
Photo Stand open
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said.
Tuning System:
Channel access:
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
9-15/16"(252.5mm) x 16-5/8"(422mm) x 5-7/8"(148.5mm)
Photo Stand close
10-5/8"(270.5mm) x 16-5/8"(422mm) x 2-1/8"(53.5mm)
Weight:
My captions are scrambled with white
boxes on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Terminals
With Photo Stand: 7.3 lbs. (3.3kg)
Without Photo Stand:6.8 lbs. (3.1kg)
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
6615LD
Dimensions(H x W x D):
With Tilt Stand
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
S-Video input:
Video input:
Audio input:
Mini DIN 4-pin jack
RCA connector
RCA connector x 4
12-5/16"(313.5mm) x 18-1/8"(460mm) x 9-7/16"(240.5mm)
Without Tilt Stand
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
Component video input:
11-13/16"(300.5mm) x 18-1/8"(460mm) x 2-1/8"(53.5mm)
Weight:
One pin jack (Y), 1Vpp(75 ohm)
Two pin jacks (PR)/(PB), 700mVpp(75 ohm)
With Tilt Stand:
9.3 lbs. (4.2kg)
Headphone:
1/8" monaural(3.5 mm)
1W, 8 ohm x 2
Without Tilt Stand: 8.2 lbs. (3.7kg)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION
channels. [OFF].
Stereo Sound System
2 speakers
2 ways AV input
Sound output:
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non
active pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD
screen.
|