Symphonic CRT Television CWF203 User Manual

FUNAI CORPORATION  
LIMITED WARRANTY  
Owner’s  
Manual  
20 INCH  
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:  
COLOR TELEVISION  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of  
original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original  
retail purchase.  
CWF203  
LABOR:  
FEATURES  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE  
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH  
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
Flat Screen Picture Tube  
MTS/SAP Tuner  
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.  
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-  
ing system provides easy channel selection, and lets you tune directly to any channel using the  
channel number buttons (0~9 and +100-key) on the remote control.  
On-Screen Function Display.  
Full-Function Remote Control  
Sleep Timer  
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,  
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.  
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no  
user operation for 15 minutes, the TV will turn itself off automatically.  
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by AUTHORIZED SERVICE FACILITY. This FUNAI CORPORATION Limited warranty  
does not apply to any the product not purchased and used in CANADA.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not  
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,  
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-  
uct or damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-  
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-  
TIVES IN CANADA.  
PRECAUTIONS  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AUTHORIZED SERVICE  
FACILITY.  
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AUTHORIZED SERVICE FACILITY.  
Place your TV in a room with adequate ventilation.  
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
Leave enough room for air to circulate around the bottom, top and back of the set.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.  
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS  
COSTS WILL BE CHARGED.  
ATTENTION:  
The serial number of this product may be found on the back of the TV. No others have the same  
serial number as yours. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR  
NOTICE.  
To locate your nearest AUTHORIZED SERVICE FACILITY or general service procedure, please contact to us:  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
FUNAI CORPORATION  
Customer Service  
100 North Street; Teterboro, NJ 07608 , USA  
Tel: 1-800-242-7158  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE  
1-800-242-7158, OR VISIT OUR WEB SITE AT http://www.funai-corp.com  
Printed in China  
L6510HL * * * * *  
0EMN02312  
ANTENNA/CABLE CONNECTIONS  
*Some cable TV systems use scram-  
bled signals and require a special con-  
verter to receive these channels.  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
UHF/VHF Rod  
Antenna  
(Not supplied)  
Consult your local cable company.  
VHF  
Antenna  
(Not supplied)  
CATV Box *  
or Satellite Box  
(Not supplied)  
ATTENTION:  
POUR ÉVITER LES CHOC  
FCC WARNING- This equip-  
ment may generate or use radio  
frequency energy. Changes or  
modifications to this equipment  
may cause harmful interference  
unless the modifications are  
expressly approved in the  
instruction manual. The user  
could lose the authority to oper-  
ate this equipment if an unau-  
thorized change or modification  
is made.  
UHF  
Antenna  
(Not supplied)  
ÉLECTRIQUES, INTRODUIRE  
LA LAME LA PLUS LARGE DE  
LA FICHE DANS LA BORNE  
CORRESPONDANTE DE LA  
PRISE ET POUSSER  
OUT  
IN  
From Cable System  
or Satellite Antenna  
75-ohm  
ANT. IN  
R
L
VIDEO  
INPUT  
VIDEO1  
JUSQU’AU FOND.  
Coaxial Cable  
75-ohm  
Coaxial Cable  
ANT. IN  
OR  
OR  
From Cable System  
VHF/UHF Combiner  
(Not supplied)  
Note to CATV system installer:  
AV input (stereo)  
This reminder is provided to call the CATV system installer's attention to Article  
820-40 of the NEC that provides guidelines for proper grounding and, in particu-  
lar, specifies that the cable ground shall be connected to the grounding system of  
the building as close to the point of cable entry as practical.  
VHF/UHF  
Combination Antenna  
(Not supplied)  
CLOSED CAPTION  
This TV can receive C1 and C2 Caption and Text.  
Notes:  
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a  
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or  
text.  
(2)Captions and texts may not match the TV voice exactly.  
(3)Interference may cause the closed caption system not to function properly.  
(4)The caption or text characters will not be displayed while the menu display or functions dis-  
play is shown.  
Caption Mode  
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-  
cast signal contains Caption Signals.  
(2)Paint-on mode: Displays input characters on the screen immediately.  
Pop-on mode: Once characters are stored in memory, they are displayed all at once.  
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)  
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters  
will not be displayed.  
(5)If you see this screen:  
Text Mode  
(1)Displays the text on the screen by scrolling (max. 7 lines)  
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.  
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To  
clear screen, select CAPTION C1, C2 or CAPTION [OFF].  
 
PREPARATION FOR USE  
3) Press the VOL(ume) button so that "ADD/DELETE" is selected.  
4) Use the CH(annel) or button to select the channel you wish to put  
into memory or to erase from memory.  
Note: The display will return to the normal screen automatically in about  
10 seconds.  
Perform "ADD/DELETE" function while this display appears on the screen.  
ADD/DELETE  
AUTO MEMO  
LANGUAGE SELECTION  
If you want to change the language of the on-screen menu, follow the proce-  
dure below.  
PICTURE  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
1) Connect the power cord to a standard AC outlet.  
Note: If some digits appear in the corner of the screen,  
press the POWER button without unplugging the power cord.  
2) Press the POWER button to turn on the TV.  
3) Press the MENU button so that the menu display appears  
on the TV screen.  
4) Press the CH(annel) or button to point to "[ENGLISH]".  
5) Select "ENGLISH" or "FRANÇAIS" = French by using  
the VOL(ume) or button.  
Press the VOL(ume) or button to light up the channel number  
in LIGHT BLUE if you wish to add the channel into memory.  
Press the VOL(ume) or button to light up the channel number  
in LIGHT RED if you wish to erase the channel from memory.  
5) Press the MENU button to exit the menu.  
PICTURE  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
MTS (Multi-Channel Television Sound) System  
You can listen to a program in MTS stereo by following the steps below..  
Menu  
6) Press the MENU button to exit the menu.  
To show the status, press the  
DISPLAY button on the remote  
control.  
CHANNEL PRESETTING  
Selection  
MAIN  
MONO  
SAP  
Type of  
Note:You MUST PRESET channels BEFORE using CHANNEL or button.  
To preset a channel or to change a preset channel, follow the procedure below.  
1) Press the POWER button to turn on the TV.  
2) Press the MENU button so that the menu display appears  
on the TV screen.  
broadcast  
-None-  
-None-  
MONO  
MAIN  
-None-  
Regular  
SAP: Second Audio Program,  
which means your program, can  
also be received in a second lan-  
guage or sometimes a radio station.  
PICTURE  
Stereo  
broadcast  
STEREO  
STEREO  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
MAIN  
SAP  
SAP  
3) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
[To Select STEREO, MONO or SAP in Stereo broadcast]  
4) Press the CH(annel) or button to point to "AUTO MEMO".  
Then, press the VOL(ume) button.  
The tuner scans and memorizes all active channels in your area.  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the CH(annel) or button to point to "TV SOUND".  
3) Press the VOL(ume) or button to select your desired stereo mode. ([MAIN], [MONO] or  
[SAP])  
ADD/DELETE  
AUTO MEMO  
The TV distinguishes between standard TV channels and cable (CATV)  
channels.  
When AUTO MEMO action is completed, the lowest memorized channel reappears on the  
screen.  
When you press the CH(annel) or button after selecting AUTO MEMO,  
the tuner will stop at the memorized channels only.  
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If  
this happens, try the AUTO MEMO action again when reception conditions are better.  
: Press the VOL(ume) or button.  
PICTURE  
PICTURE  
CHANNEL SET  
PICTURE  
CHANNEL SET  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [SAP]  
[ENGLISH]FRANÇAIS  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
V-CHIP SET UP  
CAPTION [OFF]  
CAPTION [OFF]  
TV SOUND [MAIN]  
TV SOUND [MONO]  
[ADD/DELETE FUNCTION]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
PICTURE  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
RESUME FUNCTION  
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-  
ly when the power resumes.  
OPERATIONS  
WATCHING A TV PROGRAM  
PICTURE ADJUSTMENT  
1) Press the POWER button to turn on the TV.  
2) Select the desired channel with the CH(annel) or button.  
3) Adjust the volume to the desired listening level using the VOL(ume) or button.  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the VOL(ume) button so that "PICTURE" is selected.  
3) Select the feature you wish to adjust with the CH(annel) or button and adjust it with the  
VOL(ume) or button.  
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)  
GAME MODE  
Set to the most suitable position for TV  
GAME.  
In the above steps, the picture adjustment  
display will disappear from the TV screen  
automatically after about 10 seconds if you  
do not press any buttons. Press the MENU  
and VOL(ume) button so that "PIC-  
TURE" is selected. Then, press the  
CH(annel) or button repeatedly until  
the display returns to the screen.  
If you adjust any Picture control after you  
set the Game mode to [ON], the Game mode  
is set to [OFF] automatically.  
SETTING THE SLEEP TIMER  
The sleep timer function allows you to have the power automatically turn off  
after a set time period.  
1) Press the POWER button to turn on the TV and press the SLEEP button  
on the remote control .  
[+] : ON  
[-] : OFF  
BRIGHT  
Adjust until the darkest parts of the picture are  
as bright as you prefer.  
2) You may change the sleep time by pressing the SLEEP  
button on the remote control repeatedly. The timer can be  
set up to 90 minutes, 10 minutes each time the SLEEP  
button is pushed. (The timer display counts up and sleep  
timer will be displayed on the screen when you press the  
SLEEP button on remote control.)  
SLEEP 10  
[+] : increase brightness  
[-] : decrease brightness  
To cancel the sleep timer:  
Press the SLEEP button repeated-  
ly until "SLEEP 0" is displayed.  
CONTRAST  
Adjust to increase or decrease contrast.  
[+] : increase contrast  
[-] : decrease contrast  
[USING THE GAME BUTTON]  
You may also set the Game mode and external  
input mode at the same time by pressing the  
GAME button on the remote control. "GAME"  
appears on the TV screen. In this case, connect  
the external source to the AUDIO/VIDEO  
jacks on the front panel.  
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the  
sleep time will be lost.  
COLOR  
Adjust to be brilliant or pale color.  
[+] : be brilliant color  
[-] : be pale color  
CLOSED CAPTION SELECTION  
You may view specially labeled (cc) TV pro-  
grams, movies, news, prerecorded tapes, etc.  
with either a dialogue caption or text display  
added to the program.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) or button to point  
to "CAPTION".  
TINT  
To exit the Game mode and external input  
Adjust to obtain natural skin tones.  
[+] : greenish tone  
[-] : reddish tone  
mode, press the INPUT SELECT button on  
the remote control.  
To cancel the Game mode only, adjust the pic-  
ture control. In this case, "VIDEO2" instead  
of "GAME" appears on the TV screen.  
If you press the GAME button when the TV  
3) Press the VOL(ume) or button to select  
the mode you wish.  
SHARPNESS  
4) When done, press the MENU button to exit  
the menu.  
: Press the VOL(ume) or button.  
Adjust to detail in the picture.  
[+] : increase sharpness  
[-] : decrease sharpness  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENGLISH]FRANÇAIS  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
is off, the TV turns on and will be in the  
Game mode and external input mode auto-  
matically.  
Notes:  
[
C1]  
[
C2]  
[
T1]  
[
T2]  
“+” is achieved by pressing the VOL(ume)  
button and “-” by pressing the VOL(ume)  
button.  
: Press the CH(annel) or button.  
[-]  
OFF  
[+]  
ON  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
GAME MODE  
BRIGHT  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
 
[TV RATING SET UP]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) or button to point to "V-CHIP SET UP".  
Then, press the VOL(ume) button.  
3) Press the CH(annel) or button to point to "TV RATING". Then,  
press the VOL(ume) button.  
V-CHIP SET UP  
PICTURE  
CHANNEL SET  
[ENGLISH] FRANÇAIS  
B V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.  
V-CHIP reads the ratings for programming (except for news and sports programs, unedited  
movies on premium cable channels, and Emergency Broadcast System signals), then denies  
access to programming if the program's rating meets or exceeds the limitations you select. In this  
case, "PROTECTED PROGRAM by ..." message appears on the TV screen.  
To block certain ratings, follow the steps below.  
4) Press the CH(annel) or button to point to your desired item.  
Then, press the VOL(ume) button to select [BLOCK] or [VIEW].  
Programming may be rated by the Motion Picture Association of America (MPAA) or accord-  
ing to the Television Parental Guidelines. In order to block any inappropriate programming, set  
your limits in both places (MPAA RATING and TV RATING).  
B TV RATING  
MPAA RATING  
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In  
this case, change to an unblocked channel, then press the MENU button.  
<Selection>  
• TV-Y:  
• TV-Y7:  
<Rating Category Explanations>  
Appropriate for all children  
Appropriate for children seven and  
older  
B TV-Y  
TV-Y7(  
TV-G  
TV-PG(  
TV-14(  
TV-MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
)
[MPAA RATING SET UP]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) or button to point to "V-CHIP SET UP".  
Then, press the VOL(ume) button.  
• TV-G:  
General Audience  
• TV-PG:  
• TV-14:  
• TV-MA:  
Parental Guidance suggested.  
Unsuitable for children under 14  
Mature audience only  
)
)
)
PICTURE  
CHANNEL SET  
[ENGLISH] FRANÇAIS  
B V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
3) Press the CH(annel) or button to point to "MPAA RATING". Then,  
press the VOL(ume) button.  
4) Press the CH(annel) or button to point to your desired item.  
Then, press the VOL(ume) button to select [BLOCK] or [VIEW].  
When you select the rating category and turn it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.  
When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or  
[VIEW] automatically.  
TV RATING  
B MPAA RATING  
When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically.  
<Selection>  
• G:  
• PG:  
• PG-13:  
• R:  
<Rating Category Explanations>  
General Audience  
Parental Guidance suggested.  
Unsuitable for children under 13  
Restricted; under 17 requires  
accompanying  
parent or adult guardian  
No one under 17 admitted  
Mature audience only  
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) button, the  
sub-ratings will appear on the TV screen.  
If you select the rating category (example: TV-PG) and turn it to [BLOCK] or [VIEW], the sub-  
ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.  
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set  
to [BLOCK]. To set the sub-ratings individually, follow the steps below.  
B G  
PG  
PG-13  
R
NC-17  
X
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
• NC-17:  
• X:  
When you select [TV-Y7]:  
TV-Y7  
B FV  
[BLOCK]  
[BLOCK]  
Press the CH(annel) or button to select "FV" (Fantasy Violence).  
Then, press the VOL(ume) button to select [BLOCK] or [VIEW].  
When you select [TV-PG], [TV-14] or [TV-MA]:  
When you select the rating category and turn it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.  
Press the CH(annel) or button to select "D" (Suggestive Dialog),  
"L"(Coarse Language), "S"(Sexual Situation), or "V" (Violence). Then,  
press the VOL(ume) button to select [BLOCK] or [VIEW].  
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]  
automatically.  
When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically.  
TV-PG  
B D  
L
S
V
[BLOCK]  
5) Press the MENU button to exit the menu.  
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
Notes:  
When you select [TV-MA], "D" does not appear on the TV screen.  
The sub-ratings which set to [BLOCK] appear next to the rating category  
in the TV RATING menu.  
B TV-Y  
TV-Y7(  
TV-G  
[VIEW]  
[VIEW]  
[BLOCK]  
)
5) Press the MENU button to exit the menu.  
TV-PG(DLSV) [BLOCK]  
TV-14 (DLSV) [BLOCK]  
TV-MA( LSV) [BLOCK]  
TROUBLESHOOTING GUIDE  
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-  
looked possibilities. Before arranging for service, check these items. It could save you time and money.  
MAINTENANCE  
CABINET CLEANING  
PICTURE TUBE CLEANING  
Wipe the front panel and other exterior sur-  
Wipe the picture tube of the TV with a soft  
cloth. Before cleaning the picture tube, discon-  
nect the power cord.  
faces of the TV with a soft cloth immersed  
in lukewarm water and wrung dry.  
Never use a solvent or alcohol. Do not spray  
QUICK SERVICE CHECK LIST  
liquid near the TV. Such chemicals may  
cause damage and discoloration to the  
exposed surfaces.  
POSSIBLE REMEDY  
Try a new channel, if OK, then possible station trouble.  
SUPPLIED ACCESSORIES  
Is TV plugged in?  
Power at outlet?  
Owner’s Manual  
(0EMN02312)  
Remote control unit  
(NE122UD or NE151UD)  
Owner’s  
Manual  
Is TV’s POWER button on?  
Is antenna connected to terminal on the back of the set?  
If outside antenna is being used, check for broken wire.  
Check for local interference.  
Batteries ("AA" x 2)  
Turn off with POWER button and then turn it on after about a minute.  
Adjust COLOR control.  
Adjust CONTRAST & BRIGHT control.  
Check batteries in Remote Control.  
Move the TV away from the nearby appliances or unshielded speakers which  
have Magnetism.  
SPECIFICATIONS  
GENERAL SPECIFICATIONS  
Television system:  
ELECTRICAL SPECIFICATIONS  
Turn off using the POWER button, then turn it on again 30 minutes or so later.  
NTSC-M  
Sound output:  
1W, 8 ohm x2  
Closed Caption Problem  
Possible Remedy  
TV Standard  
My TV is showing captions that are  
misspelled.  
You are watching a live broadcast and spelling errors made by the  
closed captioning production company may pass through uncorrect-  
ed. A prerecorded program will not show any misspelled words  
because of the normal time available for editing the captions.  
Closed Caption  
System:  
OTHER SPECIFICATIONS  
Remote control:  
§15.119/FCC  
Digital encoded  
infrared light system  
Channel coverage  
VHF:  
UHF:  
2 ~ 13  
14 ~ 69  
Operating  
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue  
temperature:  
5°C to 40°C  
CATV:  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
181 channel  
frequency synthesized  
tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
or there is a delay of what is being said.  
are common for live broadcasts. Most captioning production compa-  
nies can display a dialogue to a maximum of 220 words per minute.  
If a dialogue exceeds that rate, selective editing is used to insure that  
the captions remain up-to-date with the current TV screen dialogue.  
(41°F~104°F)  
Power requirements: AC120V, 60Hz  
Power consumption  
Tuning System  
Channel access:  
(Maximum):  
Picture tube:  
Dimensions:  
75W  
20"  
My captions are scrambled with white  
boxes on the TV screen.  
Interference caused by building, power lines, thunderstorms, etc.  
may cause scrambled or incomplete captions to appear.  
H : 18-5/16" (465mm)  
W: 19-15/16" (506mm)  
D : 19-13/16" (504mm)  
52.9 lbs. (24kg)  
My program guide listed a TV show as  
being closed captioned  
but none of the captions were displayed.  
Broadcasters may at times use a time compression process to the  
actual program so that additional advertising time can be given.  
Since the decoder cannot read the compressed information, captions  
will be lost.  
Weight:  
Terminals  
Antenna input:  
VHF/UHF/CATV  
75 ohm unbalanced  
(F-type)  
My prerecorded videotape does not show  
any captions. The tape box mentions it  
being closed captioned.  
The videotape was either an illegal copying or the tape duplicating  
company accidentally left out the captioning signals during the  
copying process.  
•Designs and specifications are subject to  
change without notice.  
•If there is a discrepancy between languages,  
the default language will be English.  
Video input:  
Audio input:  
RCA connector x 2  
RCA connector x 4  
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION  
channels. [OFF].  
Stereo Sound System  
2 speakers  
As an ENERGY STAR® Partner, our company has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.  
 

Sennheiser Stereo Receiver EK 1013 6 1 User Manual
Sharp Car Video System LL 171A LL 171G User Manual
Sony Network Card MSAC FD1A User Manual
Sony Portable Speaker SMS1P User Manual
Sony TV Video Accessories SU FL62 User Manual
Sony Universal Remote DAV FR8 User Manual
Southern Pride Smoker SPK 500 SL User Manual
Star Micronics Network Card PS60A 24A User Manual
Suncast Tool Storage RSH125 User Manual
SUPER MICRO Computer Server SBA 7222G T2 User Manual