BF-579
Body Fat Monitor / Scale
GB
D
Instruction Manual
Read this Instruction Manual carefully and keep it for future reference.
Bedienungsanleitung
Lesen Sie sich diese Bedienungsanleitung bitte sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf.
F
Mode d’emploi
A lire attentivement et à garder en cas de besoin.
Tanita UK Ltd.
Tanita Europe GmbH
Dresdener Strasse 25
D-71065 Sindelfingen
Germany
Tel: +49 (0)-7031-6189-6
Fax: +49 (0)-7031-6189-71
Tanita France S.A.
Villa Labrouste
The Barn, Philpots Close, Yiewsley,
Middlesex, UB7 7RY UK
Tel: +44 (0)1895 438577
Fax: +44 (0)1895 438511
68 Boulevard Bourdon
92200 Neuilly-Sur-Seine France
Tel: +33 (0)-1-55-24-99-99
Fax: +33(0)-1-55-24-98-68
NL
I
Gebruiksaanwijzing
Deze handleiding aandachtig lezen en voor naslagdoeleinden bewaren.
Manuale di Istruzioni
Leggere attentamente questo manuale di istruzioni e conservarlo per consultazioni future.
Tanita Corporation
Tanita Corporation of America Inc.
2625 South Clearbrook Drive
Arlington Heights, IL 60005 USA
Tel: +1-847-640-9241
Fax: +1-847-640-9261
Tanita Health Equipment H.K. Ltd.
Unit 301-303 3/F Wing On Plaza
62 Mody Road, Tsimshatsui East
Kowloon, Hong Kong
Tel: +852 2838 7111
Fax: +852 2838 8667
14-2, 1-Chome, Maeno-Cho
Itabashi-Ku, Tokyo, Japan 174-8630
Tel: +81(0)-3-3968-2123
Fax: +81(0)-3-3967-3766
Manual de instrucciones
Lea detenidamente este manual de instrucciones y guárdelo para futura referencia.
E
Manual de instruções
Leia cuidadosamente este manual e guarde-o para futura referência.
P
ISO 9001 Certified
©2003 Tanita Corporation
BF5797801
GB
GB
What is Total Body Water Percentage?
FEATURES AND FUNCTIONS
Total Body Water Percentage is the total amount of fluid in a person’s body expressed as a percentage of their total weight.
Approximately 50 –65% of the weight of a healthy person is water. Water plays a vital role in many of the body’s processes
and is found in every cell, tissue and organ. Maintaining a healthy total body water percentage will ensure the body
functions efficiently and will reduce the risk of developing associated health problems.
Measuring Platform
1. Display Screen
1.
2. Set Button
3. Arrow (Select) Buttons
4. Ball-of-Foot Electrodes
5. Heel Electrodes
6. Personal Keys
7. Weight-Only Key
How To Measure Total Body Water?
Deuterium Dilution Method is currently used as a typical method to measure a total body water percentage. This
instrument estimates the total body percentage by the analysis (Multiple Regression Analysis) based on the parameter
found by the BIA method.
4.
A mutuality over 0.8 is obtained between this instrument and the “deuterium dilution method”.
Note: Deuterium Dilution Method is in terms of total body water based on the analysis of the dilution of orally ingested deuterium oxide in urine.
3.
2.
3.
5.
6.
7.
8.
Accessories
8. AA-Size Batteries (4)
Healthy Total Body Water Percentage (%TBW)
The average total body water percentage ranges for a healthy adult are:
Female: 50 to 55%
PREPARATIONS BEFORE USE
Open as shown.
Inserting the Batteries
Male : 60 to 65%
Open the battery cover on the back of the measuring platform. Insert the
supplied AA-batteries as indicated.
Note: The total body water percentage of a person with a high percentage of body fat may fall below the average healthy ranges.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend to use this
unit for a long period of time, it is advisable to remove the batteries before storage.
Please note that since the batteries were inserted at the factory, their energy
levels may have decreased.
Daily Rhythm of Total Body Water
Try to measure total body water percentage at the same time of day and under the same conditions. This increases the
accuracy of the readings. The best time is in the early evening, before the evening meal, when hydration levels are more
stable. Total body water percentage tends to be underestimated to a degree if measured immediately after getting out of
bed, not only because of dehydration but also because the fluid in the body will be stored centrally in the body’s trunk.
As the day progresses this fluid becomes more evenly distributed due to the effect of gravity.
Direction of the batteries.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal
vibration to ensure safe and accurate measurement.
On the contrary, it may be overestimated after exercise or taking a bath because of the movement of body water or a rise in
the body temperature despite actual dehydration.
Note: To avoid possible injury, do not step on the edge of the platform.
Handling Tips
Important Notes
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
•
•
Take your measurements at the same time of day and under the same conditions.
Measured results depend on the movement of water in the body and/or changes in body temperature. Factors
affecting total body water levels include sleep, physical activity, eating and drinking, illness and medications, bathing
patterns and urination.
•
Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be
pressed accidentally.
•
Take fluid immediately if you have any symptoms of dehydration, particularly after physical activity or bathing.
Symptoms include a dry mouth, headache, nausea, dizziness, skin dryness, a rise in temperature, loss of
concentration, etc. If symptoms persist, consult your doctor immediately.
•
Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment,
high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass
cleaner (applied to a cloth first) to keep them shiny; avoid soaps.
• Do not step on the platform when wet.
•
•
Elderly people are at increased risk of dehydration as they have less sensitivity to thirst and other rational symptoms.
This instrument cannot be used to specifically determine an individual’s recommended total body water percentage.
Look for the long-term changes in total body water percentage and try to maintain a consistent, healthy total body
water percentage.
• Do not drop any objects onto the platform.
3
4
GB
GB
USEFUL FEATURES
HOW TO DETERMINE BODY FAT PERCENTAGE
•
Tanita Body Fat Monitor/Scales allow you to measure both weight and body fat percentage simultaneously and easily,
simply by stepping on a scale.
Setting and Storing Data in Memory
The unit can be operated only if data has been programmed into one of the personal data memories or the Guest mode.
•
•
•
Your Body Fat Monitor/Scale can be set for Male or Female, Standard or Athlete Adult, or Children (ages 7-17).
Personal data (Female/Male, Age, Height, etc.) can be pre-set and stored in memory for up to 4 people.
Unique Healthy Range Indicator automatically displays where your body fat percentage falls within the Body Fat Ranges chart (p.2).
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a
Personal Key turns on the unit.) The unit will beep to confirm activation, the
Personal Key numbers (1,2,3,4) will be displayed, and the display will flash.
Note: If you don’t operate the unit for sixty seconds after the unit has been turned on, the
unit will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have
finished programming it, press the Weight-Only Key ( ) to force quit.
• Guest feature allows you to take readings without reprogramming one of the Personal keys.
•
•
Weight-only Key provides quick weight readings.
The unit emits a helpful “beep” when activated, and also at various stages in the programming and measuring process.
Listen for these sounds which will prompt you to step on the unit, look at your readings, or confirm a setting.
2. Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the
Personal Key number you wish to use, press the Set button. The unit will
beep once to confirm.
SWITCHING THE WEIGHT MODE
You can switch the unit indication by using the switch on the back of the
lb (pounds)
3. Set Age
scale as shown in the figure.
The display defaults to Age 30 (range of user age is between 7-99). An
arrow icon appears on the lower left side to indicate Age setting. Use the
Up/Down buttons to scroll through numbers. When you reach your age,
press the Set button. The unit will beep once to confirm.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will
be automatically set to feet and inches. Similarly, if kilograms is selected, height
will be automatically set to centimetres.
kg (kilograms)
st-lb (stone pounds)
4. Select Female or Male
Use the Up/Down buttons to scroll through Female ( ) or Male ( ),
Female/Athlete and Male/Athlete settings, then press the Set button. The
unit will beep once to confirm.
5. Specify the Height
The display defaults to 5’ 7.0” (170cm) (range of user is from 3’ 4.0” – 7’
3.0” or 100cm – 220cm). Use the Up/Down buttons to specify Height and
then press the Set button. The unit will beep once to confirm.
The unit will beep twice and the display will flash all data (Male/Female,
Age, Height, etc.) three times to confirm the programming. The power will
then shut down automatically.
AUTOMATIC SHUT-DOWN FUNCTION
The automatic shut-down function shuts off the power automatically in the following cases:
GETTING ACCURATE READINGS
• If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds,
depending upon the type of operation.
To ensure accuracy, readings should be taken without clothing and under consistent
SET
3
SET
3
conditions of hydration. If you do not undress, always remove your socks or stockings,
and be sure the soles of your feet are clean before stepping on the measuring platform.
Be sure that your heels are correctly aligned with the electrodes on the
measuring platform. Don’t worry if your feet appear too large for the unit -
accurate readings can still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about three
hours after rising, eating, or hard exercise before taking measurements.
While readings taken under other conditions may not have the same
absolute values, they are accurate for determining the percentage of change
as long as the readings are taken in a consistent manner. To monitor
progress, compare weight and body fat percentage taken under the same
conditions over a period of time.
1
1
2
4
2
4
•
•
•
If an extraordinary weight is applied to the platform.
During programming, if you do not touch any of the keys or buttons within 60 seconds.*
After you have completed the measuring process.
*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Data in Memory” (p.5).
Heels centered on
electrodes
Toes may overhang
measuring platform
Note: An accurate reading will not be possible if
the soles of your feet are not clean, or if your
knees are bent or you are in a sitting position.
5
6
GB
GB
TAKING WEIGHT AND BODY FAT READINGS
PROGRAMMING THE GUEST MODE
The Guest mode allows you to use the monitor without losing the
information already assigned to a Personal Key.
1. Select Parsonal Key and Step On
Press your pre-programmed Personal key.
(Release the key within 3 seconds or the display will show "Err".)
The unit will beep and the display will show the programmed date.
To programme the Guest mode, use the Down button marked with a “G” to
turn on the power. Then follow steps 3 through 5 in “Setting and Storing
Data” (p.6.) The unit will beep twice and the display will show “0.0”. Step
onto the platform. Next follow the directions for “Get Your Reading” (p.7).
2
4
1
3
The unit will beep again and the display will show "0.0".
Now step onto the platform.
Note: If you step onto the platform before “0.0” appears the display will show “Err” and you
will not obtain a reading. Furthermore, if you do not step onto the measuring platform
within about 60 seconds after “0.0” appears, the power is shut-off automatically.
Note : If you step onto the platform before “0.0” appears the display will show “Err” and
you will not obtain a reading.
TAKING WEIGHT MEASUREMENT ONLY
Select Weight-Only Key
Press the Weight-only key. After 2 or 3 seconds, “0.0” will appear in the
display and the unit will beep. When “0.0” appears in the display, step onto
the platform. The body weight value will appear. If you remain on the platform,
the display will flash for about 30 seconds, and then the power will automatically turn off.
If you step off the platform, the weight will continue to show for about 5 seconds, then
“0.0” will appear and the unit will shut off automatically.
2. Get Your Readings
Your weight will be shown first.
Continue to stand on the platform.
2
4
1
3
"54321" will appear on the display and disappear one by one from right to left.
Your body fat percentage(%FAT) and Body Fat Range will appear on the
display screen.
Note:Do not step off until Body Fat % is shown.
TROUBLESHOOTING
If the following problems occur …then…
Your total body water percentage(%TBW) will appear on the display screen.
The display will then flash your %TBW, weight and %FAT alternately 3 times.
• A wrong weight format appears followed by kg, lb, or st-lb
Refer to “Switching the Weight Mode” on p.4.
• ”Lo” appears on the display, or all the data appears and immediately
disappears.
UNDERSTANDING YOUR READING
Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will
affect the accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.
Note: Your settings will not be erased from the memory when you remove the batteries.
Healthy Range Indicator (Standard Adults only*)
Your body fat monitor/scale automatically compares your body fat reading to
the Healthy Body Fat Range chart.
• ”Err” appears while measuring.
Please stand on the platform keeping movement to a minimum.
The unit cannot accurately measure your weight if it detects movement.
Following your body fat percentage reading, a black bar will flash along the
bottom of the display, identifying where you fall within the Body Fat Ranges
for your age and gender. For example, if the squares appear above (0) area
your range is within the Healthy Range – if they appear over (-) area, your
reading is below the Healthy Range. For more about the Healthy Range, see
page 2.
• The Body Fat Percentage measurement does not appear or ”-----” appears
Under
Healthy
Over
Obese
after the weight is measured.
Your personal data has not been programmed. Follow the steps on p.6.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides
on the measuring platform.
(-)
:
:
Underfat; below the healthy body fat range. Increased risk for health problems.
Healthy; within the healthy body fat percentage range for your age/gender.
*Note: If you select Athlete mode, the unit will
not display the Healthy Range Indicator. Athletes
may have a lower body fat range based on their
particular sport or activity.
(0)
(+) : Overfat; above the healthy range. Increased risk for health problems.
(++) : Obese; high above the healthy body fat range. Greatly increased risk
of obesity-related health problems.
• ”OL” appears while measuring.
Reading cannot be obtained if the weight capacity is exceeded.
(Range of user age is between 20-79)
• ”Err FAT%” appears while measuring.
The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
7
8
|