Package Contents
AV600 Gigabit Powerline Adapter
TL-PA6010
Quick Installation Guide
Powerline Adapter*
QIG
AV600 Gigabit Powerline Adapter
Resource CD
Ethernet Cable
* The provided power plug may diꢁer from the picture due to diꢁerent regional
power speciꢀcations. Here we take the EU version as an example.
Warning on Final Location
NOTE:
It's strongly recommended that you plug the adapter directly into the
wall socket, for some power strips have surge protector which can ꢀlter data.
MODEL NO. TL-PA6010
LED and Button Descriptions
Network Installation
1
2
Ethernet LED
Powerline LED
Power LED
Pair Button
Item
Status
Description
Solid The adapter is on.
The adapter is in power-saving mode or in pairing
procedure.
Power LED
Blinking
Oꢁ
The adapter is oꢁ.
Solid The adapter is connected to a powerline network.
TP-LINK powerline adapters are Plug and Play. After taking the steps above,
you can surf the Internet.
Blinking
The adapter is transferring data.
Powerline LED
Ethernet LED
The adapter isn’t connected to any powerline network
or is in power-saving mode. *
Oꢁ
The Ethernet port is connected, but there is no data
being transferred.
To add another adapter
Plug an additional adapter into the wall socket, and the connection will be
established automatically within 60 seconds.
Solid
Blinking The Ethernet port is transferring data.
Oꢁ The Ethernet port isn’t connected.
*
Five minutes after the device connected to the adapter is turned oꢀ, the adapter will
NOTE:
1.
automatically switch to power-saving mode.
To surf the Internet, please make sure that your network is properly
connected to the Internet.
If the adapters fail to automatically link to each other, you can
establish a private network by using the pair button. To set up a
private network, please go to Appendix: Using the Pair Button for
detailed instructions.
Item
Description
2.
Pair button is used to secure a powerline network. To secure
your network, please refer to Appendix: Using the Pair Button.
Pair Button
|