Quick Installation Guide
TEW-632BRP
1. Before You Start
Package Contents
?TEW-632BRP
?Easy Go CD-ROM
?Quick Installation Guide
?1 x RJ-45 Ethernet Cable
?AC Power Adapter (5V, 2.5A)
System Requirements
?Web Browser: Internet Explorer (5.0 or above)
?Computer with Network adapter installed
?Broadband Internet
?Installed Cable or DSL modem
Important! DO NOT connect the router until instructed to do so. Follow the
steps below before you insert the Easy Go CD-ROM into your computer's
CD-ROM Drive.
1. Verify that you have a direct
connection from your Cable or DSL
modem to your computer. Also
verify that you are connected to the
Internet by browsing to a website,
Internet
Cable/DSL Modem
1
2. Install Router
1. Insert the Easy Go CD-ROM in
your computer's CD-ROM Drive
and then click Install Router.
2. Click Start Installation.
3. Choose the desired language from
the dropdown list. Then check the
“No, thanks…” box and then click
Next.
Note: Leave the “No, thanks…” box unchecked in order to install Network
Magic immediately after the router setup.
4. Click Next.
2
5. If this screen appears, go to
Section 3. If not, please continue
to step 6.
6. Follow the Wizard instructions and
continue through the remaining
installation steps. Click Next.
7. When secure access to your
router screen appears, enter a
password for your router and then
click Next. By default, the
password is admin.
8. Enter a unique network name and
then click Next.
3
9. Select a encryption type and enter
the security key for your wireless
network and then click Next.
10. Write down the new router
information on the CD sleeve for
your own reference and click
Next.
Note: For wireless clients, please make sure the SSID and the encryption
information matches the router settings.
11. When this screen appears, the
router has been configured
successfully, click Next.
4
12. Select Exit Router Setup and
then click Finish.
Your installation is now complete.
For detailed information regarding the TEW-632BRP configuration and
advanced settings, please refer to the User's Guide included on the Easy Go
5
3. Adding the router behind an existing router
Note: When this window appears, it means you have a DSL/Cable modem
router. If you are replacing the current router with the wireless TEW-632BRP,
please select Yes and click Next to continue. If you are adding the wireless
router behind the current connection, please select No and click Next to
continue.
To replace current router
1. To replace current router, select
Yes and then click Next.
2. Follow the Wizard instructions and
continue through the remaining
installation steps. Click Next.
When secure access to your
router window appears, please go
to section 2 step 7 to continue.
6
To add the router
1. To add the wireless router behind
your current network, select No
and then click Next.
2. Follow the Wizard instructions and
continue through the remaining
installation steps. Click Next.
When secure access to your
router window appears, please go
to section 2 step 7 to continue.
Your installation is now complete.
For detailed information regarding the TEW-632BRP configuration and
advanced settings, please refer to the User's Guide included on the Easy Go
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
7
Troubleshooting
Q1: I inserted the Easy Go CD-ROM into my computer's CD-ROM drive and the installation menu does not
appear automatically. What should I do?
A1: If the installation menu does not appear automatically, click Start, click Run, and type
D:\Autorun.exe where "D" in "D:\Autorun.exe" is the letter assigned to your computer's CD-ROM Drive.
And then click OK to start the Installation.
Q2: How can I get into the TEW-632BRP web configuration page?
A2: After you install the TEW-632BRP Wireless Router, you can access the web configuration page by
Q3: I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?
A3: Contact your Internet Service Provider's (ISP) Customer Service for the correct information.
Q4: I received an error message while running the Easy Go Setup Wizard. What should I do?
A4: Make sure that your computer's CD-ROM is in working condition. Also verify that all cable connections
are secure and that you are able to connect to the Internet, and then retry installing the router. During
setup, the Easy Go Setup wizard will check the operation of your network adapter and Internet connection.
If the 111 error message appears, you may need to change the IP address of the router.
2) Click on Basic -> Network Settings.
3) Under Router Settings, change the Router IP address to 192.168.11.1.
4) Under DHCP Server Settings, change the DHCP IP Address Range to 192.168.11.101 to 192.168.11.200.
5) Click Save Settings.
Q5: All the settings are correct, but I can not make a wireless connection to the Router. What should I do?
A5: First, make sure that the WLAN switch on the back of the router is set to on. Second, double check
that the WLAN light on the Router is lit. Third, power cycle the TEW-632BRP. Unplug the power to the
TEW-632BRP. Wait 15 seconds, then plug the power back in to the TEW-632BRP. Fourth, contact the
manufacturer of your wireless network adapter and make sure the wireless network adapter is configured
with the proper SSID.
Q6: After I finish installing the router, then Network Magic Installation Wizard appears. What should I do?
A6: Network Magic™ is an optional bonus program. It works with your router to setup, manage, repair
and protect your home network. To install Network Magic, go to Easy Go CD-ROM and select Bonus/
Install Network Magic™, click Next and then follow the Installation Wizard instructions.
If you still encounter problems or have any questions regarding the TEW-632BRP, please refer to the User's Guide
included on the Easy Go Setup CD-ROM or contact TRENDnet's Technical Support Department.
8
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2007. All Rights Reserved. TRENDnet.
|