®
MP3/WMA/CD Player MP-10
User Manual
To ensure the smooth handling of your warranty please write the serial number
of your device into the box. In the case of warranty you are expected to send it
together with a copy of your invoice to your nearest TEAC sales representative.
Contents
CONTENT OF PACKAGE ............................................................. 18
LOCATION OF CONTROLS ......................................................... 18
POWER SOURCES ....................................................................... 19
Using Nickel-metal-hydride batteries: ............................... 19
Using AC/DC adaptor ........................................................ 20
Using external battery case (supply for some
models only) ........................................................................ 20
To recharge the Nickel-metal-hydride rechargeable
batteries ............................................................................... 20
GENERAL OPERATIONS............................................................... 21
To disable/resume the buttons functions .......................... 23
To select a track by the navigational search function ... 23
To skip at directory level for MP3 and WMA playback
only ....................................................................................... 24
To disable the Electronic Shock Protection (ESP)
for CD-DA playback only ................................................... 24
To select the preset equalizer modes ............................... 24
ADVANCE OPERATIONS ............................................................. 25
SPECIFICATIONS .......................................................................... 26
WARRANTY .................................................................................. 27
17 | MP-10
CONTENT OF PACKAGE
MP3/WMA/CD player MP-10, adapter, earphone, 2 recharge-
able batteries, remote control unit, external batterie pack,
manual
LOCATION OF CONTROLS
18 | MP-10
1 External battery connec-
tion
2 DC input socket
3 Lid open switch
4 "Next" button ꢀ
5 "Previous" button ꢁ
6. Play / Pause button
7 Stop button ꢂ
8 Volume up button Vol +
9 Volume down button Vol -
10 Audio out socket
11 Remote control &
earphone socket
12 LCD display
13 ESP On / Off andDirectory
/ file level button (DIR/ESP)
14 Equalizer preset button
(EQ)
15. Earphone socket
16 Mode button
17 Hold function On / Off
switch
18 Navigational search
button (NAV)
POWER SOURCES
Using Nickel-metal-hydride batteries:
1. Open the lid of the player and open the battery compart-
ment door. Insert two pieces of the Nickel-metal-hydride bat-
tery following the polarity as indicated on the unit, and close
the battery compartment door.
2. Do not mix using new battery with old battery.
3. Batteries should be recharged or replaced when the battery
level indicator on the LCD display shows empty continuously.
4. When the batteries are fully discharged, the battery level in-
dicator will blink for about 5 seconds and the unit will be shut
off automatically.
19 | MP-10
Remark: To remove the Nickel-metal-hydride batteries from
the battery compartment, press the negative pole of the
battery downward. The positive pole of the battery will be
tilted up and the battery can be taken out easily.
PUSH
Using AC/DC adaptor
Use only DC output between 4.5V and 6.0V with positive pole to
the center pin, and make sure that the AC input voltage of the
adaptor matches with the domestic supply. Any other adaptor
may cause damage to the unit.
Remark:
Stop the player before connect (or disconnect) the adap-
tor DC jack to the player.
Using external battery case (supply for some models only)
Insert two pcs of AA (UM-3/R06) size battery into the battery
case (optional accessory) following the polarity as indicated.
Then close the battery case. Plug the jack of the battery case
to the external battery connection socket of the player.
To recharge the Nickel-metal-hydride rechargeable
batteries
Switch off the player with the Stop button and connect the AC/
DC adaptor to the player. The rechargeable batteries inside the
battery compartment will be recharged automatically.
20 | MP-10
If the player is operating by the power source of AC/DC adap-
tor, while the rechargeable batteries are kept inside the battery
compartment, switch off the player by pressing the Stop but-
ton. Leave the player idle for about 60 sec., the batteries will be
recharged automatically.
The recharging will be cut off automatically when the batteries
are fully recharged. The LCD shows the recharging status or the
cut off status.
Recharging status
Recharging cut off status
Remarks:
The batteries will be recharged only when the player is at
the off (idle) status. If the Play/Pause button is pressed dur-
ing recharging, the player will perform playback function
and the recharging will be interrupted.
GENERAL OPERATIONS
1. Insert the disc into the player and close the lid securely.
2. Connect the LCD line remote control unit to the player, and
the earphone to the LCD line remote control unit.
3. Press and hold the Play/Pause button for one second, the
player scans the disc and then starts playing.
21 | MP-10
Remark:
The title of song, artist’s name, and album’s name can be
displayed if the MP3 disc is with the ID3 versions V1, V1.1, V2
2.0, or V2 3.0 information.
4. Adjust the volume to the desire level by pressing the “VOL -”
or “VOL +” button.
To
Press
Display Example
(for MP3 format)
Pause
Resume play after pause
Skip to the next track
ꢀ
ꢁ
Go to the beginning
of the current track
Skip to the previous track
ꢁ 2x
ꢂ
Stop
22 | MP-10
Remarks:
A. To enhance power saving at the MP3 and WMA formats,
the spinning motor stops when the buffer memory is full.
B. The unit will be switched off automatically approx. 60 sec-
onds after the playback is stopped.
To disable/resume the buttons functions
ꢃSlide the HOLD switch to the direction of the arrow and the
function of buttons are disabled.
ꢃTo resume the function of buttons, slide the HOLD switch to
the opposite direction of the arrow.
To select a track by the navigational search function
ꢃPress the NAV. button once and the display will show selec-
tion levels [Dir] and [File], if the files are sorted into different
directories. Otherwise, the track numbers or names will be dis-
played.
ꢃUse the Play/Pause button or the Stop button ꢂ to move
the cursor upwards or downwards on the display, and use the
Next button ꢀ to confirm the selection.
ꢃIf no selection has been made, press the NAV button again
to resume normal operation.
23 | MP-10
To skip at directory level for MP3 and WMA playback only
ꢃPress the DIR/ESP button once, the “Album SKIP” indicator
appears on the display for about two seconds.
ꢃAt this status, press the Next button or Previous button, the skip
function is on directory level.
ꢃPress the DIR/ESP button again to go back to file level.
To disable the Electronic Shock Protection (ESP) for CD-DA
playback only
ꢃDuring playback, the ESP indicator shows on the display and
the ESP is in operation.
ꢃPress the DIR/ESP button once to disable the ESP function, and
the CDA indicator shows on the display.
ꢃPress the DIR/ESP button again to resume the ESP function.
To select the preset equalizer modes
ꢃPress the EQ button to select from Classic, Pop, Jazz, Rock, X-
Bass, and Normal modes.
24 | MP-10
ADVANCE OPERATIONS
(A) During playback, press the MODE button to perform the
following functions :
Repeat One; Repeat All; Repeat Directory; Introduction
Scan; Random; Random Repeat All; Random Repeat Di-
rectory; Repeat Off
Mode
Function
Repeat One
Repeat All
Repeat the current track
Repeat all tracks in the disc
Repeat tracks within the same
directory
Repeat Directory
Play 10 seconds of each track in
the disc
Introduction Scan
Random
Play all tracks in the disc randomly
Repeat all tracks in the disc
randomly
Random Repeat all
Repeat tracks within the directory
randomly
Random Repeat Directory
Note:
Repeat Directory and Random Repeat Directory functions
are available only when the MP3 files have been recorded
in different directories.
(B) During stop status, use the MODE button to perform play-
back programming.
ꢃPress the MODE button once, the display shows P-001 at the
right hand bottom corner.
ꢃUse the Next button or Previous button to select the desired
track to play at the first place.
25 | MP-10
ꢃPress the MODE button to confirm and start the program-
ming of the second track.
ꢃRepeat the above procedures to program the consecu-
tive tracks.
ꢃAfter programming, press the Play/Pause button to start the
programmed playback.
Note:
Max. 32 tracks can be programmed.
SPECIFICATIONS
Support Media:
Support Format:
Playing Bit-rate:
CD, CD-R, CD-RW
CD-DA, MP3, WMA
MP3: 8 - 384 Kbps, and
WMA: up to 192 Kbps
ESP Control:
Approx. 180 sec. for CD-DA,
480 sec. for MP3 (128 Kbps), and
960 sec. for WMA (64 Kbps)
20 - 20,000 Hz 2 dB (measured by
TCD-783)
Frequency response:
Output level:
Earphone: 12mW + 12mW @ 16 ohms
Line out: 0.7V r.m.s. at 50 Kilohms
Battery based operation: up to 8 hours with Nickel-metal-hy-
dride (NiMH) batteries
up to 12 hours with external batterie
case (2 x AA)
Operating Temperature: 5°C – 35°C
Power Sources:
i) 4.5V – 6V DC via adaptor
ii) 3V DC via external battery case
iii) 2 x NiMH battery, 1350mAh, 1.2V
26 | MP-10
|