Foodservice Equipment
Job
Item#
Conveyor Toaster
TC21D3666, TC21D3663, TC21D3663UK
Models shown ma y ship UPS
Standard Features:
• 10” wide conveyor belt
• Automatic cool-down feature
• Energy-saving standby mode
• Stainless steel exterior construction
• Air-cooled case construction
• Single-piece stainless steel crumb tray
• Damage resistant calrod heating elements
• All models toast bread, buns and bagels
• Convection air dries product faster
• Large, easy-to-operate dial controls
• Separate upper and lower heat
• Settings and conveyor belt speed
• High volume (900 slices per hour)
• Factory installed NEMA cord and plug
Fea tu ring a 3” loa ding height to
a ccommoda te a va riety of produ ct
thicknesses
TC21D3666
Heating:
Application:
Safety:
When control is set to “ON”, top
and bottom tubular elements will
turn on to toast both sides of bread.
Lightness and darkness of the
product is achieved by adjusting the
top and bottom heat controls.
Standby position allows for energy
savings during non-peak periods.
TC21D3 Series Conveyor Toasters
are designed to uniformly toast
breads, buns, bagels, and muffins in
large quantities, using continuous
feed methods.
Unique air flow design keeps case,
top, and sides cool. The unit is
equipped with an auto cool down
feature which allows the fan to cool
the outer skin when the unit is
turned off.
General Information:
Product Height:
Construction:
• Extra-Tall 3” (76mm) high opening.
Steel construction with a stainless
steel finish is used for durability. A
stainless steel full-length, slide out
crumb tray for easy clean-up. A
fiberglass return tray is included.
Controls:
Rotary 3-position dial selects
ON/OFF/STANDBY positions.
A conveyor speed dial controls the
belt speed. Heat dials control the
upper and lower heating elements.
Conveyor Type:
• TC21D3 - Conveyor extends to
the end of the toasting chamber.
Product Loading:
Electrical:
• TC21D3 is equipped with a
loading rack that is angled to
feed the product into the
toaster continuously.
Available in 208V or 240V, 1-phase
only. Total rated input is 2.9 KW and
2.71 KW for CE.
A factory installed 6 foot (1.8m)
cord is included.
Accessories:
• Fiberglass return tray.
• Angled loading rack.
(Supplied with TC21D3)
• Horizontal loading rack (optional)
• Stainless steel tray (optional)
fits models as an exit tray.
Product Delivery:
• TC21D3’s are capable of rear-
exit pass through operation.
They are shipped as front-return
models, but can easily be
converted to rear-exit operation.
by following the supplied
instructions.
Warranty:
Warranty includes one year parts
and labor, on-site service. (USA
only) Call factory for warranty
authorization.
®
Toll Free: 1-800-338-9886 • Telephone: 1-906-863-4401 • Fax: 1-906-863-5889
|