Instruction Sheet
PAM-3
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
Power Accessory Module
The PAM-3 Power Accessory Module provides a wide variety of electrical outlets for the output of a
Tripp Lite UPS system. The PAM-3 may be hardwired to the output of a Unison SmartOnLine®
SU6K or SU10K.
Safety:
• The PAM-3 features both 120V and 208/240V outlets. Make sure to connect equipment to
receptacles of the correct voltage.
• A total load of 30 amps can be drawn from the PAM-3. When connecting equipment,
take care not to exceed this current rating.
Connecting a PAM-3 to the Output of a SmartPro
DataCenter or PAM-1
• Simply plug your PAM-3's NEMA L14-30P plug into the NEMA L14-30R output
receptacle on the rear of your SmartPro DataCenter unit or on the front of your PAM-1.
Copyright © 2000 Tripp Lite. All rights reserved.
Unison SmartOnLine® and SmartPro DataCenter® are registered trademarks of Tripp Lite.
|