Turbo Chef Technologies Car Speaker CON 3003 User Manual

TM  
TurboChef Technologies Inc.  
Speaker Installation  
Service kit CON-3003 includes:  
Replacement speaker  
Two connector wires  
RWD-9654: Use to connect speaker to electrical harness on residential ovens (Figure 1).  
HCT-4262: Use to connect speaker to electrical harness on conveyor ovens (Figure 2).  
NOTE: i-Series oven models will not require either wire to be installed. For speaker installations on  
conveyor or residential ovens, use whichever connector wire is required and discard the other.  
Figure 2: HCT-4262 Wire  
Figure 1: RWD-9654 Wire  
To replace the speaker on a Residential oven:  
1. Ensure the oven is removed from any power source (i.e., the breaker is turned off).  
2. Remove the oven from the wall, making sure it does not rest on the front frame.  
CAUTION: Allowing the oven to rest on the front of the frame will damage it and may prevent  
reinstallation.  
NOTE: For information regarding proper oven removal and reinstallation and accessing assemblies, see  
the service manual.  
3. Access the failed speaker (Figures 3 and 4).  
4. Replace the speaker using the RWD-9654 wire to attach it to the harness.  
5. Ensure functionality and reinstall the oven.  
Speaker  
Speaker  
Figure 4: Residential Gen 2 Speaker Location  
Figure 3: Residential Gen 1 Speaker Location  
© 2010 TurboChef Technologies, Inc.  
DOC-1250 / Rev B / April 2010  
Page 1 of 2  
 

TechniSat CRT Television 100Hz Television sets Colani TV Classic Line User Manual
Timex Watch W273 EU1 355 095009 02 User Manual
Toyota Car Stereo System 86720 3090 User Manual
Tripp Lite TV Cables S457 006 User Manual
True Fitness Home Gym ADI 10260 I User Manual
Vector Automobile Parts VEC012APC User Manual
Vicks Humidifier V3100 User Manual
ViewSonic Flat Panel Television N3251w User Manual
Vinotemp Refrigerator VT 18TEDS User Manual
Vornado Fan ULTRA3 User Manual