Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 1
™
MILLENNIUM 3
Universal Remote Control
User’s Guide
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 3
INTRODUCTION
The Universal Electronics Millennium™ 3 is our latest
generation universal remote control.It is designed to
operate all of the features of your cable converter and
only the most-used features of your TV (e.g.,Volume
Up/Down) andVCR (e.g.,Play,Stop,Fast Forward,
Rewind,Pause,and TV/VCR Select).Moreover,the
Millennium 3 is packed with easy-to-use features such as:
• Preprogrammed codes to operate the cable converter
supplied by your cable system provider
• Preprogrammed technology for easy setup
• Color-coded keys to quickly locate popular functions
• Cable ID Lock to lock your remote control for use only
with the cable converter
• Code Search to help program control of older or
discontinued components
• Option key for assigning your favorite channels
• Shift key for access to cableVideo On Demand (VOD)
features and TV channel changing capability
Before you can use your new remote control,you will
need to program it to operate the specific home enter-
tainment components you wish to control.Follow the
instructions detailed in this manual to set up your
Millennium 3 and enjoy your new remote control.
3
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 4
FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 3 features
and then study the Key Charts (on the next two pages) to
learn how they function.
4
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 5
Key Charts
The LED (red light) blinks to show that
the remote control is working and is
sending signals.
Press VCR,TV,or CBL once to turn on
or off a selected component.
Use SETUP for all programming
sequences.
Use the keypad (0 ~ 9) to directly select
channels (e.g.,09 or 31).
Press MUTE once to turn sound off
or on.
Press ENTER once after entering channel
numbers on some TV models.
Use volume + (or volume -) to raise (or
lower) the sound volume.
Use CH + (or CH -) to select the next higher
(or lower) channel.
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
Use FAV to cycle through your favorite
channels that are stored in your cable
converter.
Use GUIDE to display the program guide.
Press PPV/LOCK once to display the pay
per view menu or to lock out a specific
channel on your cable converter.
Use EXIT to exit out of your cable
converter’s menu and guide.
Use cursor keys to move the cursor in
the program guide and menu screens.
continued on next page...
5
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 6
Key Charts (continued)
Use SELECT/OK to choose options,PPV
events,and to tune programs from the
program guide.
Use INFO to display current channel and
program information.
Press MENU once to display your cable
converter’s screen menu.
Use PAGE ▲ (or PAGE ▼) to page up
or down) through menu screens and the
program guide.
Use OPTION to program one-button
selection of your favorite channels (see
page 24).
Use SHIFT to access features on your
TV’s channels and cable system’sVideo
On Demand (VOD) (see page 21).
In the VCR and TV modes,use the REW,
PLAY,FF,REC,STOP,and PAUSE keys to
control yourVCR.To record a program,
press REC twice.
Reserved for cable converter features
(see your cable converter manual).
Press TV/VCR once to switch theVCR to
view TV channels or tape.
6
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 7
INSTALLING BATTERIES
❶
❷
❸
1.
2.
On the back of the Millennium 3,push the tab
and lift off the battery cover.
Obtain two (2) fully-charged AA alkaline bat-
teries.Match the + and – marks on the batter-
ies to the + and – marks in the battery case,
then insert the new batteries.
3.
4.
Press the battery cover back into place.The tab
should click when the cover is locked.
Test the unit by any mode key (e.g.VCR,TV,or
CBL).If the batteries are inserted correctly,the
LED will blink once.
NOTE: Whenever batteries need replacement, the Millennium 3
will blink twice with every key press. Simply replace the batteries
and the Millennium 3 will be restored to its full functionality,
complete with your favorite settings.
7
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 8
PROGRAMMING TV CONTROL
NOTE: If you own a TV/VCR combination, skip this section and
perform“Programming TV/VCR Combo Control”on page 16.
Locate the brand name of your TV in the Setup Codes For
TVs section below,and write it in the following space.
TV Brand: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 3 to operate your TV:
1.
2.
Turn on the TV.
On the Millennium 3,press TV once. Press and
hold SETUP until the LED blinks twice,then
release SETUP.
3.
Enter the first four-digit code for your TV. If
you perform this procedure correctly,the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4.
5.
Aim the Millennium 3 at your TV and press TV
once.The TV should turn off.If it does not
respond,repeat steps 2-3,trying each code for
your brand until you find one that works.If it
still does not work,try searching for the code
(see Searching For Your Code on page 22).
Write your TV code in the boxes below for
future reference.
NOTE: Remember, to use the Millennium 3 to operate your TV,
press TV first.
Setup Codes for TVs:
A-Mark
AOC
0003
0030,0019,0003,0052,0185
Abex
0032
0093
0046
0092
0030
0179
0177
Admiral
Adventura
Aiko
Akai
Alaron
Ambassador
8
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 9
Anam
0180
Anam National 0055
Archer
0003
Audiovox
Baysonic
Belcor
0451,0180,0003,0092,0623
0180
0019
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
0154,0016
0180
0019
0236,0463,0003
0180
Candle
0030,0056,0046,0186
Carnivale
Carver
0030
0054
Celebrity
Cineral
0000
0451,0092
Citizen
0060,0030,0056,0039,0046,0092,0186,0280
Clairtone
Concerto
Contec
0185
0056
0180,0185
0180
Craig
Crosley
0054
Crown
0180,0039
Curtis Mathes
0047,0054,0154,0051,0451,0093,0060,0030,0145,0056,
0016,0039,0166,0466
Daewoo
Daytron
Denon
0451,0019,0039,0092,0623,0624
0019
0145
Dumont
Dwin
Electroband
Emerson
0017,0019
0720,0774
0000,0185
0154,0236,0463,0180,0282,0178,0019,0179,0039,0038,
0177,0185,0280,0623,0624
Envision
Fisher
0030
0154,0159
Fujitsu
0179
Funai
0180,0179,0171
Futuretech
GE
0180
0047,0051,0451,0093,0282,0178,0021,0055,0027,0135
Gibralter
GoldStar
Gradiente
Grunpy
Hallmark
0017,0030,0019
0030,0178,0019,0056,0001,0032
0053,0056
0180,0179
0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard
Hitachi
Infinity
Inteq
JBL
JCB
0180
0145,0056,0032,0038,0151
0054
0017
0054
0000
continued on next page...
9
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 10
Setup Codes for TVs (continued):
JVC
0053
Janeil
0046
KEC
0180
KTV
0180,0030,0039,0185,0280
Kaypani
Kenwood
Kloss
0052
0030,0019
0024,0046
LG
0056
LXI
0047,0054,0154,0156,0178
Logik
0016
Luxman
MEI
0056
0185
MGA
0150,0030,0178,0019
MTC
0060,0030,0019,0056,0185
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
0054,0030,0179,0020,0024,0096,0186,0187,0386
0016
0054,0030
0250
0178,0145,0003
0154,0250,0150,0178,0056,0016
0047,0017,0051,0039,0032,0135
0021
0093,0150,0178,0019
0093,0055
0180
0156,0178,0166
0030,0019,0056,0497
0092
NEC
NTC
Nikko
Noshi
0030,0178,0092
0018
Onwa
0180
Optimus
Optonica
Orion
Panasonic
Penney
0154,0250,0166
0093,0165
0236,0463,0179
0051,0250,0055
0047,0156,0051,0060,0030,0178,0021,0019,0018,0056,
0039,0003,0027,0032,0135
Philco
0054,0463,0030,0145,0019,0020,0096
Philips
Pilot
0054
0030,0019,0039
Pioneer
Portland
Prism
0038,0166
0019,0039,0092
0051
Proscan
Proton
Pulsar
0047
0178,0003,0052,0466
0017,0019
Quasar
RCA
Radio Shack
Realistic
0051,0250,0165,0055
0047,0051,0093,0019,0018,0038,0090,0135
0047,0154,0165,0180,0030,0178,0019,0056,0039,0032
0154,0165,0180,0030,0178,0019,0056,0039,0032
10
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 11
Rhapsody
Runco
0185
0017,0030,0497
SSS
0180,0019
Sampo
0030,0039,0032,0052
Samsung
Samsux
Sansei
0060,0030,0178,0019,0056,0032
0039
0451
Sansui
0463
Sanyo
0154,0146,0159
Scimitsu
Scotch
0019
0178
Scott
0236,0180,0178,0019,0179
Sears
0047,0054,0154,0156,0178,0179,0056,0146,0159,0171
Semivox
Semp
0180
0156
Sharp
0093,0165,0039,0386
0019
0016
0186,0187
0000,0080
0180,0178,0179,0186
0003
Shogun
Signature
Simpson
Sony
Soundesign
Spectricon
Squareview
Starlite
0171
0180
Supre-Macy
Supreme
Sylvania
Symphonic
TMK
0046
0000
0054,0030,0020,0096
0171
0178,0056,0177
0093
Tandy
Tatung
0055,0003
0051,0250
0179
Technics
Technol Ace
Techwood
Teknika
0051,0056,0003
0054,0180,0150,0060,0019,0179,0056,0016,0039,
0092,0186
Telefunken
Toshiba
Tosonic
0056
0154,0156,0060
0185
Totevision
Universal
0039
0027
Vector Research 0030
Victor
0053
Vidikron
Vidtech
Viking
Wards
0054
0178,0019
0046
0054,0165,0030,0178,0021,0019,0179,0056,0016,0020,
0027,0080,0096
White Westinghouse 0623,0624
Yamaha
Zenith
Zonda
0030,0019
0017,0016,0092
0003
11
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 12
PROGRAMMING VCR CONTROL
NOTE: If you own a TV/VCR combination, skip this section and
perform“Programming TV/VCR Combo Control”on page 16.
Locate the brand name of yourVCR in the Setup Codes For
VCRs section below,and write it in the following space.
VCR Brand: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 3 to operate yourVCR:
1.
2.
Turn on yourVCR and insert a video cassette.
On the Millennium 3,press VCR once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3.
Enter the first four-digit code for yourVCR.If
you perform this procedure correctly,the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4.
Aim the Millennium 3 at yourVCR and press
VCR once.TheVCR should turn off.If yourVCR
remote control does not have a POWER
key, press PLAY. If theVCR does not respond,
repeat steps 2-3,trying each code listed for your
brand until you find one that works.If theVCR
still does not work ,try searching for the code
(see Searching For Your Code on page 22).
5.
Write yourVCR code in the boxes below for
future reference.
NOTE: Remember, to use the Millennium 3 to operate your VCR,
press VCR first.
Setup Codes for VCRs:
Admiral
Adventura
Aiko
0048
0000
0278
Aiwa
Akai
0037,0000,0307
0041,0061,0106
American High 0035
Asha 0240
12
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 13
Audiovox
Beaumark
Bell & Howell
Broksonic
CCE
0037
0240
0104
0184,0121,0209,0002,0479
0072,0278
Calix
0037
Canon
0035
Capehart
Carver
0020
0081
Cineral
0278
Citizen
0037,0278
Colt
0072
Craig
0037,0047,0240,0072,0271
Curtis Mathes
Cybernex
Daewoo
Daytron
Denon
Dynatech
Electrohome
Electrophonic
Emerex
0060,0035,0041,0162
0240
0045,0278,0020,0561
0020
0042
0000
0037
0037
0032
Emerson
0037,0184,0000,0121,0043,0209,0002,0278,0061,0208,
0212,0479,0561
Fisher
Fuji
0047,0104,0054,0066
0035,0033
Funai
0000
GE
0060,0035,0048,0240,0202
Garrard
GoVideo
GoldStar
Gradiente
HI-Q
0000
0526
0037,0038
0000,0008
0047
Harley Davidson 0000
Harman/Kardon 0081,0038
Harwood
Headquarter
Hitachi
JVC
Jensen
KEC
0072
0046
0000,0042,0041,0105
0067,0041,0008
0041
0037,0278
0072
KLH
Kenwood
Kodak
LXI
0067,0041,0038
0035,0037
0037
Lloyd’s
Logik
0000,0208
0072
MEI
0035
MGA
0240,0043,0061
MGN Technology 0240
MTC
Magnasonic
0240,0000
0278
continued on next page...
13
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 14
Setup Codes for VCRs (continued):
Magnavox
Magnin
0035,0039,0081,0000,0149
0240
Marantz
Marta
0035,0081
0037
Matsushita
Memorex
0035,0162
0035,0037,0048,0039,0047,0240,0000,0104,0162,0046,
0307
Minolta
Mitsubishi
Motorola
Multitech
NEC
0042,0105
0048,0067,0043,0061
0035,0048
0000,0072
0104,0067,0041,0038
Nikko
0037
Nikon
0034
Noblex
Olympus
Optimus
Optonica
Orion
0240
0035
0037,0048,0104,0162
0062
0184,0002,0479
Panasonic
Penney
Pentax
Philco
0035,0162,0077,0225
0035,0037,0240,0042,0038,0054
0042,0105
0035,0209,0479
Philips
Pilot
0035,0081,0062
0037
Pioneer
Portland
Profitronic
Proscan
Protec
0067
0020
0240
0060,0202
0072
Pulsar
0039
Quarter
Quartz
Quasar
RCA
0046
0046
0035,0162,0077
0060,0035,0048,0240,0042,0149,0077,0105,0106,0202
Radio Shack
Radix
0000
0037
Randex
Realistic
Ricoh
0037
0035,0037,0048,0047,0000,0104,0062,0046,0066
0034
Runco
0039
STS
0042
Samsung
Sanky
0240,0045
0048,0039
Sansui
Sanyo
0000,0067,0041,0271,0479
0047,0240,0104,0046
Scott
0184,0045,0121,0043,0212
Sears
0035,0037,0047,0000,0042,0104,0046,0054,0066,0105
Semp
0045
Sharp
0048,0062
14
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 15
Shintom
Shogun
Singer
0072
0240
0072
Sony
0035,0032,0000,0033,0034
0035,0081,0000,0043
0000
0240,0208
0041
0000,0041
0035,0162
0035,0037,0000
0000
0045,0043,0066,0212
0037,0240
0240
Sylvania
Symphonic
TMK
Tatung
Teac
Technics
Teknika
Thomas
Toshiba
Totevision
Unitech
Vector
0045
Vector Research 0038
Video Concepts 0045,0061
Videosonic
Wards
0240
0060,0035,0048,0047,0081,0240,0000,0042,0072,0149,
0062,0212
White Westinghouse 0278
XR-1000
Yamaha
Zenith
0035,0000,0072
0038
0039,0000,0033,0034
15
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 16
PROGRAMMING TV/VCR COMBO CONTROL
Locate the brand name of your TV/VCR Combo in the
Setup Codes For TV/VCR Combos section below,and write
it in the following space.
TV/VCR Combo Brand: ________________________
The brands are listed in alphabetical order with popular
codes listed first.You will use one of these codes to pro-
gram the Millennium 3 to operate your TV/VCR Combo:
1.
Turn on your TV/VCR Combo and insert a
video cassette.
2.
On the Millennium 3,press VCR once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3.
4.
Enter the first four-digit code for your TV/VCR
Combo.If you perform this procedure correct-
ly,the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
Aim the Millennium 3 at your TV/VCR Combo
and press VCR once.The unit should turn off.If
it does not respond,repeat steps 2-3,trying
each code listed for your brand until you find
one that works.If it still does not work,try
searching for the code (see Searching For Your
Code on page 22).
5.
If you’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate
TV code is also listed, you’ll need to program
this code into the Millennium 3 to access vol-
ume control (see Programming TV Control on
page 8).
If there is no separate TV code listed,you will
need to perform the following steps to access
volume control:
a. Press and hold SETUP until the LED blinks
twice,then release SETUP.
b. Enter 9 - 9 - 3.The LED will blink twice.
c. Press VCR once.The LED will blink twice.
16
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 17
6.
Write your TV/VCR Combo code in the boxes
below for future reference.
NOTE: Remember, to use the Millennium 3 to operate your
TV/VCR Combo, press VCR first.
Setup Codes for TV/VCR Combos:
American High 0035 (for TV use 0051)
Brocksonic
Colt
0002,0294,
0072
Curtis Mathis
Daewoo
Emerson
Funai
0035 (for TV use 0051)
0278
0002,0294,0479
0000
GE
0035 (for TV use 0051),0060 (for TV use 0047),
0048 (for TV use 0093),0240
Hitachi
HQ
0035 (for TV use 0051),0000
0000
Lloyds
0000
MGA
0240
Magnavox
Magnin
Memorex
Mitsubishi
Orion
0081 (for TV use 0054),0035 (for TV use 0051),0000
0240
0037,0162 (for TV use 0250)
0048 (for TV use 0093)
0002,0294,0479
Panasonic
Penney
Quasar
RCA
0035 (for TV use 0051),0162 (for TV use 0250)
0035 (for TV use 0051),0240,0162 (for TV use 0250)
0035 (for TV use 0051),0162 (for TV use 0250)
0060 (for TV use 0047),0035 (for TV use 0051),
0048 (for TV use 0093)
Sansui
Sanyo
0000,0479
0240
Sears
Sharp
Sony
Symphonic
Zenith
0000,0037
0048 (for TV use 0093)
0032 (for TV use 0000)
0000
0000
17
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 18
PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
The Millennium 3 is preprogrammed at the factory to
operate the cable converter given to you by your cable
company. However, if you have another brand or model
of cable converter or satellite receiver that you would like
to control,then you’ll need to perform the following
instructions to unlock the cable key,enter in a new code,
and lock the cable key again.
To unlock the Cable key:
1.
2.
Turn on the Cable Converter or DBS Receiver.
On the Millennium 3,press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3.
4.
Enter 9 - 9 - 7.The LED will blink twice.
Press CH – once.The LED will blink twice.
To program the Cable key:
1.
Locate the brand name of your Cable Converter
(or Direct Broadcast Satellite Receiver) in the
Setup Codes For Cable Converters (or Setup
Codes For DBS Receivers) section starting on the
next page,and write it in the appropriate space.
Cable Converter Brand: ________________
or
DBS Receiver Brand: __________________
The brands are listed in alphabetical order
with the most popular codes listed first.You
will use one of these codes to reprogram the
Millennium 3 to operate your Cable Converter
or DBS Receiver.
2.
3.
On the Millennium 3,press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
Enter the first four-digit code for your Cable
Converter or DBS Receiver.If you perform this
procedure correctly,the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
18
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 19
4.
5.
Aim the Millennium 3 at your Cable Converter
or DBS Receiver and press CBL once.The unit
should turn off.If it does not respond,repeat
steps 2-3,trying each code listed for your brand
until you find one that works.If it still does not
work ,try searching for the code (see Searching
For Your Code on page 22).
Write your Cable Converter or DBS Receiver
code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 3 to operate your Cable
Converter or DBS Receiver, press CABLE first.
To lock the Cable key:
1.
On the Millennium 3,press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
2.
3.
Enter 9 - 9 - 7.The LED will blink twice.
Press CH + once.The LED will blink twice.
Setup Codes for Cable Converters:
ABC
0003,0008,0017,0013
ABC Cable
Americast
Contec
0033
0899
0019
General Instrument 0476,0276,0810
GoldStar
Hamlin
Jerrold
Macom
Memorex
Movie Time
NSC
0144
0020,0259
0003,0012,0476,0276,0810
0033
0000
0063
0063
Oak
0019
Optimus
Panasonic
Paragon
Pioneer
Pulsar
0021
0000,0107,0021
0000
0144,0533
0000
Quasar
RCA
0000
0021
Regal
Runco
0020,0259
0000
continued on next page...
19
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 20
Setup Codes for Cable Converters (continued):
Samsung
0144
Scientific Atlanta 0008,0477,0017,0277,0774,0877
Sprucer
Starcom
TV86
0021
0003
0063
Tocom
Toshiba
Viewstar
Zenith
0012,0013
0000
0063
0000,0525,0899
Setup Codes for DBS Receivers:
AlphaStar
Echostar
Expressvu
0772
0775
0775
General Instrument 0627,0361,0869
HTS
0775
Hitachi
Hughes
JVC
0819
0749
0775
Jerrold
0627,0361
0724,0722
0724
0869
0701
0724,0722
0627,0361
0566
Magnavox
Memorex
Next Level
Panasonic
Philips
Primestar
RCA
Sony
0639
Star Choice
Toshiba
Uniden
Zenith
0869
0790
0724,0722
0856
20
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 21
USING THE SHIFT KEY
The SHIFT key is designed to provide access to channel
control capabilities of your TV (e.g.,Digits 0-9,Up/Down,
Enter,and Last) andVideo On Demand (VOD) features of
your cable converter.
NOTE:Video On Demand is not available on all cable converters.
To check for compatibility, please refer to the owner’s manual that
came with your cable converter.When activated the VCR trans-
port keys will serve as Video On Demand keys.
To Activate TV’s Channel Control Capabilities:
1.
2.
On the Millennium 3,press SHIFT once.
Press TV once.The LED will blink twice.
To Reset Channel Control To Cable Converter:
1.
2.
On the Millennium 3,press SHIFT once.
Press any key once,excluding TV.
To Activate Cable’s Video On Demand (Using
The VCR Transport Keys):
1.
2.
On the Millennium 3,press SHIFT once.
Press PLAY once.The LED will blink twice.
To Reset VCR Transport Keys for VCR Use:
1.
2.
On the Millennium 3,press SHIFT once.
Press and release CBL.
21
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 22
SEARCHING FOR YOUR CODE
If your TV,VCR,or Cable Converter does not respond to
the Millennium 3 after trying all of the codes listed for
your brand,or if your brand is not listed at all,try search-
ing for your code.
For example,to search for a code for your TV:
1.
2.
Turn on your TV.
On the Millennium 3, press and hold SETUP
until the LED blinks twice,then release SETUP.
3.
4.
Enter 9 - 9 - 1.The LED will blink twice.
Aim the remote control at the the TV and slowly
alternate between pressing ▲ and TV.
Stop when the TV turns off.
NOTE: In the search mode, the Millennium 3 will
send IR codes from its library to the selected compo-
nent, starting with the most popular code first.
5.
6.
Press SETUP once to lock in the code.
To search for the codes of other components,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,VCR or CBL) for the (VCR
or Cable) component you are searching for.
22
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 23
CHECKING THE CODES
If you have set up the Millennium 3 using the Searching
For Your Code procedure,you may need to find out which
four-digit code is operating your equipment:
For example,to find out which code is operating your TV:
1.
2.
Turn on your TV.
On the Millennium 3, press and hold SETUP
until the LED blinks twice,then release SETUP.
3.
4.
Enter 9 - 9 - 0.The LED will blink twice.
To view the code for the first digit,press 1 once.
Wait 3 seconds and count the number of LED
blinks (e.g.,3 blinks = 3) and write down the
number in the leftmost TV Code box below.
NOTE: If a code digit is“0”, the LED will not blink.
5.
6.
Repeat step 4 three more times for remaining
digits.Use 2 for the second digit,3 for the third
digit,and 4 for the fourth digit.Finish writing
down the code in the TV Code boxes below.
To check for the codes of other components,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,VCR or CBL) for the (VCR
or Cable) component you are checking.Write
down the codes in the appropriate boxes below.
TV Code
VCR Code
CABLE Code
23
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 24
PROGRAMMING THE OPTION KEY FOR A
SPECIFIC CHANNEL OR KEY SEQUENCE
The Millennium 3 includes one OPTION key that can be
programmed to remember up to three of your favorite
channel settings.Or you can set it to remember a
sequence of key presses,such as“All On /All Off”, so you
can turn on/off your components with a single key press.
To program OPTION to remember channels:
1.
On the Millennium 3, press and hold SETUP
until the LED blinks twice,then release SETUP.
2.
Enter 9 - 9 - 5.The LED will blink twice.
3.
4.
Press OPTION once.
Using the keypad,enter the channel number to
be remembered (e.g.,3 - 9 for channel 39).
NOTE: If you are programming a channel for a
Digital Cable Converter, you need to enter all chan-
nels in a 3-digit channel format. For example, if the
desired channel is 39, then enter it as 0 - 3 - 9.
5.
6.
Press and hold SETUP until the LED blinks
twice,then release SETUP.
To add another channel,repeat steps 1-5,sub-
stituting the new channel to be added in step 3.
NOTE: Programming more than three channels onto
OPTION key will overwrite previous settings. To clear all
channels in memory, perform“To Clear The Option
Key”on the next page.
To program OPTION for all On/Off:
1.
On the Millennium 3, press and hold SETUP
until the LED blinks twice,then release SETUP.
2.
Enter 9 - 9 - 5.The LED will blink twice.
3.
4.
5.
6.
7.
Press OPTION once.
Press CBL.
Press TV.
Press VCR.
Press and hold SETUP until the LED blinks
twice,then release SETUP.
24
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 25
To clear the OPTION key:
1.
On the Millennium 3, press and hold SETUP
until the LED blinks twice,then release SETUP.
2.
Enter 9 - 9 - 5.The LED will blink twice.
3.
4.
Press OPTION once.
Press and hold SETUP until the LED blinks
twice,then release SETUP.
5.
The OPTION key is now clear and ready for
reprogramming.
25
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 26
TROUBLESHOOTING
PROBLEM: LED does not blink or blinks twice when you
press a key.
SOLUTION: Replace the batteries with two (2) new AA
alkaline batteries (see page 7).
PROBLEM: LED blinks when you press a key,but home
entertainment component does not respond.
SOLUTION: Make sure you are aiming the Millennium 3 at
your home entertainment component and that
you are within 15 feet of the component you are
trying to control.
PROBLEM: The Millennium 3 does not control home enter-
tainment components or commands are not per-
forming properly.
SOLUTION: Try all listed codes for the component brand
being set up. Make sure all components can be
operated with an infrared remote control.
PROBLEM: TV/VCR combo does not respond properly.
SOLUTION: Use theVCR codes for your brand. Some combo
units may require both a TV code and aVCR
code for full operation (see page 16).
PROBLEM: CH+ , CH– , and LAST do not work for your
RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM: Changing channels does not work properly.
SOLUTION: If original remote control required pressing
ENTER to change channels,press ENTER on the
Millennium 3 after entering a channel number.
PROBLEM: Tried“Search Method”and still could not find a
working code.
SOLUTION: Try the“Search Method”again after clearing out
the device key as follows: Press and hold ENTER
until red light blinks twice,then release.Next
enter 9 - 9 - 2.Then press and release the device
key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or Sharp
TV/VCR Combo.
SOLUTION: For power on,these products require program-
ming TV codes on the Millennium 3.For Sony,
use TV code 0000 andVCR code 0032. For Sharp,
use TV code 0093 andVCR code 0048.
26
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 27
ADDITIONAL INFORMATION
The Millennium 3 does not have any user-serviceable
parts.Opening the case,except for the battery cover,may
cause permanent damage to your Millennium 3.
For help via the Internet,visit us at:
cable.rcinfo.com
(do not type in http:// or www before the address)
For help via e-mail,contact us at:
CableHelp@ueic.com
Copyright 1999 by Universal Electronics Inc.No part of
this publication may be reproduced,transmitted,tran-
scribed,stored in any retrieval system,or translated to
any language,in any form or by any means,electronic,
mechanical,magnetic,optical,manual,or otherwise,
without the prior written permission of Universal Elec-
tronics Inc.
M3090
5/99
27
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 28
|