K-1500 Series
TECHNICAL
Stainless Steel
Panel Telephones
January 10, 2002
Practice
TELECOM SOLUTIONS FOR THE 21ST CENTURY
Vandal Resistant, Stainless
Steel, Panel Telephones
The K-1500 Series provides simple vandal resistant, communi-
cation in a flush mount, stainless steel, panel telephone. The K-
1500-7 and K-1500-6 work ideally with Viking’s DLE-200B line
simulator or on a dedicated ringdown circuit. If dialing is nec-
essary, use Viking’s K-1900-7 or combine the K-1500 Series
phones with Viking’s K-1900-5 Hot-Line Dialer.
The K-1500 Series phones consist of a heavy gauge
stainless steel panel, an armored cable, a heavy duty
handset, and an all metal cradle. The K-1500-7 features
a black handset while the K-1500-6 features a red hand-
set. Both phones are is designed to mount to a standard
double gang electrical box.
K-1500-6
K-1500-7
Applications
• Ringdown phones
Phone...715.386.8861
• Catalog sales
• Kiosks in malls
• Courtesy and customer service phones
• Automated tellers
Features
• Operates on C.O. lines or analog PABX/KSU stations
• Flush mounts to a standard double gang box
• Security and emergency phones
• Hot-Line phone when
used with a K-1900-5
• Optional VE-5x10 Surface
Mount Box (K-1500-7 only)
Need More Information the VE-5x10?
Call (715) 386-4345 and select 424.
Need More Information the K-1900-5?
Call (715) 386-4345 and select 317.
?
?
• Optional VE-9x20 Weather-
proof Box (K-1500-7 only)
Hot-Line Dialer
• Point to point communication when used with
Need More Information the VE-9x20?
Call (715) 386-4345 and select 413.
?
Need More Information the DLE-200B?
Call (715) 386-4345 and select 605.
the DLE-200B Line
Simulator
?
Installation
The K-1500 Series phones are designed to be flush mounted to a
standard double gang box (not included). Connect tip and ring to the
modular RJ11 jack.
Note: Four extra screws
and nuts are provided to
fill unused mounting holes.
(4) #6-32 x 3/4” Stainless
Steel Hexdrive Screws
(included)
Specifications
2.1"
Double Gang Box
(not included)
3.5"
Power: Telephone line powered
Dimensions: K-1500-6 - 115mm x 115mm x 100mm (4.5” x
4.5” x 4”), K-1500-7 - 127mm x 254mm x 102mm (5” x 10” x 4”)
Shipping Weight: K-1500-6 - 0.9 kg (2 lbs), K-1500-7 - 1.8 kg
(4 lbs)
2.75"
K-1500-6
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%
noncondensing humidity
Connections: (1) RJ11 jack
Panel Material: .125 inch stainless steel
Mounting: Flush mountable to a standard double gang box
Analog C.O.
Line or
KSU/PABX
Station
(8) #6-32 x 3/4”
Stainless Steel
Hexdrive Screws
(included)
K-1500-7
Product Support Line...715.386.8666 Fax Back Line...715.386.4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such
changes.
Fax Back Doc 352
Printed in the U.S.A.
ZF300650
Rev D
|