Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
CL3-0061 RE
CL7-0061 RE, V00
Assembled, designed and supported in Andover, Kansas.
Montaje, diseño y soporte en Andover, Kansas.
Questions or comments?
¿
Prequntas o comentarios?
800.234.0604
VORnaDO® VORtEx actiOn
tRuSt
It is said that trust isn’t given, but earned. For decades Vornado
has been earning the trust of our customers by offering them only
the best. Vornado provides the highest level of performance,
coupled with the highest level of support available. Complete
satisfaction with no exceptions – this is Vornado’s promise to you.
If you are not satisfied for any reason, please contact us.
Knowledgeable representatives are available at 1-800-234-0604
from 8:00 AM to 5:00 PM CST. A wealth of additional support is
and the entire staff at our Andover, Kansas headquarters – thank
you for selecting Vornado.
Ordinary Heater
Without Adequate
Heat Circulation
Vornado whole
Room Heater
With Signature
Vortex Heat
Circulation
82º
82º
82º
72º
72º
72º
Sincerely,
Bill phillips
CEO, Vornado Air
LEaDERS in aiRfLOw tEcHnOLOgy™
62º
Ordinary heaters provide only localized heat. Heat
immediately rises to the ceiling, resulting in cold and hot
spots in the room. Vornado’s unique Vortex Action delivers
continuous, uniform heat surrounding everyone in the
room in a warm, comfortable temperature.
Zippi™
fLippi™
wHOLE ROOM
aiR ciRcuLatORS
wHOLE ROOM
tOwER
wHOLE ROOM
HuMiDifiERS
ciRcuLatORS
HEatERS
English
3
iMpORtant inStRuctiOnS
REaD aLL inStRuctiOnS BEfORE uSing tHiS HEatER.
Do not run cord under carpeting. Do not cover cord with throw rugs,
Please visually inspect all internal and external components before
connecting to electric current. If any damage is found, DO NOT
USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
To disconnect heater, turn controls to off, then remove plug from outlet.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or damage
the heater.
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch
hot surfaces. Use handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep
them away from the sides and rear.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
Extreme caution is necessary when any heater is used by or near children
or invalids and whenever the heater is left operating and unattended.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the
heater malfunctions, has been dropped or damaged in any manner.
Discard heater, or return to authorized service facility for examination
and/or repair.
Always plug heaters directly into a wall outlet/receptacle. Never use with
an extension cord or relocatable power tap (outlet/power strip). Operate
this heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub or other water container.
4
English
HOw tO uSE
Using your Vornado Heater is easy. Just follow these simple steps.
Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that is
representative of the room temperature. The unique side-angled
air inlets allow the heater to be placed closer to walls than
possible with most ordinary heaters (but do not place close to
combustibles). Avoid areas of temperature extremes such as cold
drafts and heat registers. Please refer to IMPORTANT
1.
This heater is equipped with a thermal safety shut-off system,
designed to turn off the heater when an internal overheating
condition is detected (see How To Use “RESETTING YOUR
VORNADO HEATER,” to determine how to check and
reset the heater).
INSTRUCTIONS at the beginning of this owner’s guide.
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
2. Plug the power cord into a standard wall outlet.
3. Set the POWER switch to ON.
4. Set THERMOSTAT to the highest setting. When the room reaches
the desired comfort level, turn the THERMOSTAT knob slowly
counterclockwise until the heat cycles off (easier to detect when
FAN is set to AUTO).
Do not operate this product with any electronic speed-control
device on the same circuit.
Do not use heater to dry human or animal hair/fur or articles
of clothing.
caRE & MaintEnancE
Your heater has no user serviceable parts. Do not disassemble the
unit – it will void your warranty. If service is required, return your
heater to Vornado (see Warranty section).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will require
regular cleaning. Be sure to unplug the unit prior to any cleaning
activity. Use a vacuum cleaner with the brush attachment to clean any
accumulated dust on the front grill and the side air inlets.
During the off-season or extended periods of non-use, store your
heater. Unplug the unit and bundle the cord. Save the plastic bag
the heater was shipped in so you can cover the unit and minimize
settling dust.
SaVE tHESE
inStRuctiOnS
English
5
VH102 OpERating cOntROLS
RESEtting yOuR VORnaDO HEatER
1
pOwER On/Off
Illuminated when the unit is ON.
Your Vornado Heater has a multi-level safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning,
or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset
the heater.
2
tHERMOStat
4
3
Allows you to select your desired
comfort level.
For fan only use - select the FAN
setting and press CONT. on the
FAN switch.
2
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
1.
2.
3.
4.
5.
1
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
3
4
fan
In the AUTO position, the fan will cycle on and off with the heating
element. In the CONT. position, the fan will run continuously.
Set the POWER switch to ON. Your Vornado Heater should now
function normally.
HEat
If the safety shut-off system repeatedly shuts off your heater or if it
will not reset after following the above procedure, DO NOT
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
(I) LOW HEAT 750 watts
(II) MEDIUM HEAT 1125 watts
(III)HIGH HEAT 1500 watts
VH2 OpERating cOntROLS
pOwER On/Off
1
Illuminated when the unit is ON.
2
tHERMOStat
4
3
Allows you to select your desired
comfort level.
fan
In the AUTO position, the fan will
cycle on and off with the heating
element. In the CONT. position,
the fan will run continuously.
3
4
2
1
HEat
LOW HEAT 750 watts
HIGH HEAT 1500 watts
6
English
OpERating tipS
aDVancED SafEty fEatuRES
TIGHT GRILL SPIRALS
Resists curious fingers.
In smaller areas, you might prefer to set the FAN switch to AUTO. In the AUTO
position, the fan will come on only when the heating element is on.
In larger spaces, your Vornado® Heater will function most effectively with the
FAN switch set to CONT. In the CONT. position, the vortex beam of air will
gently keep the air circulating in the room for even, uniform heating.
Your heater, like any other 1500 watt electric heater, draws up to 12.5 amps of
electric current. If using your heater on HIGH HEAT causes your home’s circuit
breaker or fuse to trip, we offer the following suggestions:
COOL TOUCH CASE
Safe to touch, even on high heat setting.
Try turning off other electrical appliances that run on the same circuit as
your heater.
Run your heater on LOW HEAT.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element is shut off.
Have your electrician add an additional circuit to your home’s electrical system.
When the room temperature is higher than the set temperature it is normal
and correct to have little to no heat coming out of the VH2 or VH102.
When the unit is first turned on there is a slight delay before heat will start
to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY
ELECTRICAL APPLIANCE.
TIP-OVER PROTECTION
Heater will automatically shut off if tipped towards the
front or back.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
English
7
VORnaDO aiR LLc
5-yEaR LiMitED waRRanty
Vornado Air LLC (“Vornado”) warrants to the original consumer or
purchaser that this VH102 and VH2 heater (“Product”) is free from defects in
material or workmanship for a period of five (5) years from the date of
purchase. If any such defect is discovered within the warranty period,
Vornado, at its discretion, will repair or replace the Product at no cost if the
Product is returned to Vornado postage-paid. Repairs not covered by the
warranty or outside the warranty period will require a fee to cover the cost of
materials, handling and shipping.
Staple or attach your original sales receipt to this Owner’s Guide. Please also
write your Product’s serial number below (located on product specs decal).
Serial No.______________________________________
After receiving the RA form, ship your Product to:
Vornado Air LLC
Attn: Warranty & Repair
415 E. 13th Street
Andover, KS 67002
This warranty does not apply to defects resulting from abuse of the
Product, modification, alteration, repair or service of the Product by
anyone other than Vornado, mishandling, improper maintenance,
commercial use of the Product, damages which occur in shipment or are
attributed to acts of God.
To assure proper handling, packages must be clearly marked with the RA
number. Packages not clearly marked with the RA number may be refused at the
receiving dock.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS
LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Please allow 1-2 weeks for repair and return of your Product after the
Product is received.
© 2011 Vornado Air LLC Andover, KS 67002
Specifications subject to change without notice. Vornado® is a trademark owned
by Vornado Air LLC. Designed, engineered and assembled in the U.S.A.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may have
other rights that vary from state to state.
VORNADO CONSUMER SERVICES
For warranty or repair service, call 1-800-234-0604 or email
[email protected] to obtain a Return Authorization
(“RA”) form. Please have or include your Product’s model number and
serial number, as well as your name, address, city, state, zip code and
phone number when contacting Vornado for warranty service. You may
be required to provide the original sales receipt. For your records:
800.234.0604
8
English
|