VuPoint Solutions Scanner PDS ST510 VP User Manual

4
Selected resolution  
High:600 dpi / Low:300 dpi  
4.7 Stitch file  
4. Using the scanner  
To group scanned files into a new folder within the microSD card use the Stitch file function.  
4.1 Charging the battery  
1.  
Press the [STITCH FILE] button to create a new folder within the microSD card for files  
storage. SF white LED light will turn on.  
PDS-ST510-VP Manual  
1.  
2.  
Before first using the scanner, it is recommended to charge the battery for 6-8 hours.  
To charge, connect the scanner to a (1) USB 2.0 port or (2) an outlet with the power  
adapter included. When charging, “Err” (Error) red light will be lit and will turn off once  
the battery is fully charged.  
2.  
3.  
Then scan your documents. Your files will be saved into the new folder.  
To save another new set of scans in another folder, press the [STITCH FILE] button  
again to generate a new folder.  
1. Key features  
Note: Do not remove the battery from the battery compartment.  
600/300 dpi resolution scan selection  
For free optional stitching software, please download the program from the following link:  
Directly save JPEG file to microSD/microSDHC card  
Supports microSD/microSDHC card up to 32GB  
Driver free to download for Windows® XP, Windows® Vista™,  
Windows® 7 and Mac OS® 10.4 or above  
4.2 Inserting a microSD memory card (not included)  
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your  
pictures. Inserting the microSD memory card:  
4.8 How to scan  
Note: To scan, make sure your scanner is not connected to the computer.  
(direct plug-in, driver installation not required)  
1.  
2.  
Turn OFF the scanner.  
Insert the microSD card into the microSD card slot (with metal side facing upwards).  
1.  
2.  
3.  
Turn on the scanner by sliding the [POWER] button to ON.  
2. Functional parts  
Place the document on a flat surface and hold down the document with one hand.  
Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the  
paper to ensure the most of the document can be scanned. Make sure to keep the  
scanning area in between the scanning width indicator marked on the side of the  
scanner.  
Gently press in until card is clicked in and latched. The SD card indicator  
appear on the LCD screen.  
must  
Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory  
card. Align microSD card position (as marked) and try again.  
4.  
Hold the scanner flat against the material and then press the [SCAN] button once.  
4.3 Time setting  
1.  
Press [TIME SET] button to enter time setting mode by using a thin, blunt object, such  
as a paperclip to access the button. The LCD screen will read “1##” (step 1) for the year.  
“##” is a set of number that would be changed to correspond to the actual time/date  
setting. The numbers 1-5 in front of “##” indicates each step in the settings.  
Press the [STITCH FILE] or [DPI] buttons to select the current Year.  
Part  
Function  
2.  
3.  
4.  
Press [SCAN] button to confirm setting. The LCD screen will now read “2##.”  
Repeat steps 2 and 3 to select the Month, Date, Hour, and Minute.  
Select High(600dpi) / Low(300dpi) resolution;  
High / Low resolution mode icon will be displayed on  
status LCD screen.  
1
Resolution  
Indicator  
Setting  
Year  
Month  
Date  
Hour  
Minute  
2
3
Stitch file  
Create new folder for file storage.  
1##  
2##  
3##  
4##  
5##  
5.  
6.  
Slide the scanner slowly, keeping you hand stable to get the best quality picture.  
Press the [SCAN] button again to stop scanning.  
Power On/Off: Switch this key left or right to turn  
scanner on or off.  
Power button  
In power on mode, press this button to start scanning,  
press this button again to stop scanning  
4
5
Scan  
5. LED light indications  
5
After setting the Minute, “5##”, press the [TIME SET] button again to complete the Time  
Scan LED indicator  
Error LED indicator  
Ready for scan: Green LED on  
and Date setting.  
6
7
8
9
Over speed: Red LED on  
Scanning status display  
Stitch file: White LED on  
For 4.2V rechargeable battery  
4.4 Formatting the microSD memory card  
Note: Formatting the microSD is recommended but not necessary. All contents on the microSD  
card will be erased during formatting.  
LCD screen  
SF LED indicator  
Battery door  
1.  
Insert a microSD card into the scanner with metal side facing upwards. Then power on  
the scanner.  
Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to  
access the button. An “F” shows on the LCD screen.  
Press the [SCAN] button once to begin formatting microSD card.  
The microSD card indicator will blink until the formatting process is complete.  
GREEN” SCAN LED ON  
Scan in progress.  
10  
11  
microSD card slot  
USB interface  
microSD/microSDHC card storage location.  
2.  
GREEN” SCAN LED OFF  
Standby / Scan is complete.  
----------------------------------------------------------------------------------------------------  
Download photo to a computer via USB cable provided.  
3.  
4.  
RED” ERROR LED ON  
Scanning too fast.  
12  
13  
Time set  
Press to enter Time and Date setting mode  
May cause scanning error.  
Restart and scan again.  
4.5 Calibrating your scanner  
Note: Perform calibration only when white balance needs adjustment.  
Format button  
Press this button to format the microSD/SDHC card.  
1.  
Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on  
the provided “White Balance Calibration” paper.  
Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE]  
RED” ERROR LED OFF  
No error in scanning speed.  
Continue scanning process.  
3. Explanation of the status icons  
2.  
---------------------------------------------------------------------------------------------------------------------  
button, press the [SCAN] button once and then release both buttons. SD symbol  
flash and “GREEN” and “RED” LED light will turn on.  
will  
WHITE” SF LED ON/OFF  
A new folder created.  
3.  
4.  
Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED light  
will stay on.  
With only the “GREEN” LED light on, start scanning the white paper by sliding the  
scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner  
backwards if necessary).  
Scan will START when  
button is pressed  
button again  
To END scan, press  
Item  
1
Function  
Description  
5.  
Slide the [POWER] button to OFF to turn off the scanner. Calibration is complete.  
SD card indicator  
Photos will be stored in microSD card  
4.6 Setting the resolution  
2
3
Battery indicator  
Battery is full  
Empty battery  
1.  
By pressing the [DPI] resolution button on the scanner, you may choose between high  
resolution (600 dpi) and low resolution (300 dpi).  
The high or low resolution mode will be displayed on the LCD screen to reflect your  
choice.  
Counting indicator  
Show scanned files in microSD card  
2.  
 

Technika CRT Television 19 220 User Manual
Tektronix Sprinkler SG 5010 User Manual
Toshiba DVD Player SD 3800 User Manual
Trane Heat Pump TWA PRC001 EN User Manual
TRENDnet Network Hardware TPE103I User Manual
Tripp Lite TV Mount DWM1323SE User Manual
Tunturi Rowing Machine R701 User Manual
ViewSonic MP3 Player NMP 500 User Manual
VTech Telephone 921 ADL User Manual
Watlow Electric Electric Heater Mica Strip Heater User Manual