tweeter
owner’s
manual
THANK YOU
for purchasing JBL GTO16t automotive tweeters.
We’ve organized this manual to make your installation as
simple and trouble-free as possible. Please read it thoroughly before
proceeding. Remember to keep your sales receipt and this manual
in a safe place so both are available for future reference.
TWEETER INSTALLATION
BLACK (–)
(–) SMALL LUG
BLACK
RED (+)
BLACK (–)
Figure 3. Surface-mounting the
tweeter and connecting the
crossover.
RED (+)
RED
1
(+) LARGE LUG
2
Figure 5. Aiming the tweeter at a
desired listening position.
4
3. Rotate entire assembly
to aim angled tweeter
toward listener.
Figure 4. Mounting the tweeter
using the I-Mount™ (patent no.
5,859,917) flush-mounting kit.
Also see Figure 5.
4. Securely tighten
the large hand nut.
3
1
1. Slide screw up or
2
down to adjust
tweeter angle.
2. Tighten nut and
washer to lock
angle settings.
SPECIFICATIONS
GTO16t
Type:
25mm (1") tweeter
Speaker Impedance:
Power Handling:
4 ohms
50W RMS, 150W Peak
(with enclosed filter)
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
90dB
2.5kHz – 21kHz
31mm
Cut-Out Diameter:
45mm
GENERAL CARE
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any
cleaners or solvents on the grilles or the speaker cones.
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without
notice.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
JBL Consumer Products
declare in own responsibility that the product
described in this owner’s manual is in compliance with
technical standards:
250 Crossways Park Drive, Woodbury, NY 11797 USA
© 2003 Harman International Industries, Incorporated
EN 50081-1:1992
EN 50082-1:1997
JBL is a registered trademark of
Harman International Industries, Incorporated
Emmanuel Millot
Harman Consumer International
Chateau-du-Loir, France. 3/03
Part No. GTO16TOM3/03
|