1
DEH40532 INSTALLATION INSTRUCTIONS
Record Plus™ Molded Case Circuit Breaker Accessories
Wire Connector Kit
Congratulations and thank you for choosing the
Record Plus™
family of current
-limiting
circuit breakers. This UL-listed lug connector kit is
suitable for use with the FC100 circuit breaker series.
Record Plus™ circuit breakers are designed with a
full line of integrated accessories. All units use the
latest in integrated modular circuit breaker
technology for flexibility in application and
maximizing
capabilities.
the
product’s
utilization
an
All Record Plus™ circuit breakers are listed by
Underwriters Laboratories to the UL489
standard and the CSA Standard C22.2, No. 5.
These circuit breakers are certified to
IEC60947-2.
These accessories are also for use with our MAG -
BREAK® instantaneous trip only circuit breakers,
which meet the same standards and are UL-
recognized components for use in motor applications.
They can also be used with our molded case
switches, which are listed per Under
Laboratories to the UL489 standard.
writers
Record
Plus™
circuit
breakers
and
their
—
accessories are designed and manufactured to
exceed our global customers’ high standards for
reliability and quality.
Figure 1. Lug kits installed on Record Plus™ FC100 circuit breaker.
Product Description
These instructions describe the installation
procedure for the wire connector accessory
on Record Plus™ FC100 circuit breakers,
as shown in Figure 1.
The wire connector kits are available in five
variants:
Warning: DANGER of electrical shock or injury.
Ensure ALL electrical power supplies are OFF
before installing or removing any devices. Do not
remove circuit protective devices until the power
Catalog No.
Wire
FCAL12/FCALK12
FCAL13/FCALK13
FCAL14/FCALK14
FCO13/FCOLK13
FCO14/FCOLK14
#14 - 10 AWG Cu/Al
#10 - 4 AWG Cu/Al
#4 - 1/0 AWG Cu/Al
#10 - 4 AWG Cu
#4 - 1/0 AWG Cu
is turned OFF.
The breaker, trip unit, or
accessories MUST ONLY be installed and serviced
by QUALIFIED personnel. See NEMA publication
AB4.
—
Avertissement:
Danger contre les risques
S'assurer avant TOUTES
Table 1.List of accessory lug kits.
d'électrocutions.
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position
The catalog numbers with “K” (e.g. FCALK12)
contain three (3) wire connectors. The catalog
numbers without a “K” (e.g. FCAL12) contains
one (1) wire connector. The parts are illustrated
in Figure 2 and 3. Numbers in brackets in the
text and the figures refer to the item numbers in
Table 2.
OFF.
Les disjoncteurs, unités de protection, ou
accessoires doivent être installés par des
personnes qualifiées et habilitées. Ne pas retirer
l’appariel de protection avant que l’alimentation
soit coupée. Lira NEMA publication AB4.
|