R
EN
FR
ES
CDM-7871
FM/AM Compact Disc Receiver
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
Shinagawa-ku,
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
Tel.: (03) 9769-0000
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Tel.: 01908-61 15 56
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 02-48 47 81
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Dalian Ikemiya Printing Co., Ltd.
4 Jin Zhou Street Economic & Technical Development
Dalian China
Designed by ALPINE Japan
Printed in China (Y)
68P01434K45-A
ENGLISH
Conte nts
CD Player Operation
Op e ra ting Instruc tions
Opening and Closing the Movable display ..... 12
Playback .......................................................... 12
Music Sensor (Skip)........................................ 12
Fast Forward and Backward ........................... 13
Repeat Play ..................................................... 13
M.I.X. (Random Play) .................................... 13
Scanning Programs ......................................... 13
Displaying and Scrolling CD Text .................. 13
Controlling CD Changer (Optional) ............... 13
Information
WARNING
WARNING..................................................2
CAUTION ...................................................2
PRECAUTIONS .........................................2
Basic Operation
Detaching the Front Panel................................. 4
Attaching the Front Panel ................................. 4
Initial System Start-Up ..................................... 4
Turning Power On and Off ............................... 4
Display Angle Adjustment ................................ 5
Subwoofer On and Off ...................................... 5
Adjusting Volume/Balance (Between Left and
Right)/Fader (Between Front and Rear) ........ 5
Audio Mute Function ........................................ 5
Selecting BBE Mode ........................................ 6
Setting the Bass control .................................... 6
Setting the Treble control.................................. 7
Changing Audio Level Display Pattern ............ 7
Setting the AUX Mode...................................... 7
Displaying Time................................................ 8
Setting Time ...................................................... 8
Radio Operation
In Case of Difficulty ....................................... 14
Specifications .................................................. 15
Insta lla tion a nd Conne c tions
Warning ........................................................... 16
Caution ............................................................ 16
Precautions ...................................................... 16
Installation ...................................................... 17
Connections .................................................... 18
LIMITED WARRANTY
Manual Tuning .................................................. 9
Automatic Seek Tuning .................................... 9
Manual Storing of Station Presets .................. 10
Automatic Memory of Station Presets ............ 10
Storing into Direct Access Preset (D.A.P.)
Band............................................................. 11
Tuning to Preset Stations ................................ 11
1
-EN
WARNING
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Center for repairing.
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and –10°C (+14°F) before turning your
unit on.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
Moisture Condensation
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the
player and wait about an hour for the moisture to
evaporate.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
2-EN
Installation Location
Never Attempt the Following
Make sure the CDM-7871 will not be installed in a
location subjected to:
Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
Do not attempt to insert a disc into the unit when the unit
power is off.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Handling the Detachable Front Panel
•
•
Do not expose to rain or water.
Do not drop or apply shock.
Correct Handling
Inserting Discs
Do not drop the disc while handling. Hold the disc so you
will not leave fingerprints on the surface. Do not affix
tape, paper, or gummed labels to the disc. Do not write on
the disc.
Your player accepts only one disc at a time for playback.
Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the
disc. Your player will automatically eject any disc that is
inserted incorrectly. If the player continues to eject a
correctly inserted disc, push the Reset switch with a
pointed object such as a ball-point pen.
CORRECT
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or damage
the player.
INCORRECT
CORRECT
New Discs
As a protective measure to prevent the CD from jamming,
the CD player will automatically eject discs with irregular
surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading,
using your finger, feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the
disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ball-point pen or other
such instrument, then insert the disc again.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the centre
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
Center
Hole
Center
Hole
New
Disc
Bumps
Outside
(Bumps)
Disc Accessories
Irregular Shaped Discs
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the
disc to be out of standard specifications and may create
operational problems. We recommend not using these
accessories on discs played in Alpine CD players.
Be sure to use round shape discs only for this unit and
never use any special shape discs.
Use of special shape discs may cause damage to the
mechanism.
Transparent Sheet
Disc Stabilizer
3
-EN
Ba sic Op e ra tion
RESET
POWER
2
MODE
BAND
8
9
g DN
f UP
SETUP
MUTE
ANGLE
1
Detaching the Front Panel
• Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine
dealer.
Point the optional remote control transmitter at
the remote control sensor.
1
2
3
Press and hold the POWER button for more than
3 seconds to turn off the power.
Press the
(Release) button at upper left side
until the front panel pops out.
Grasp the left side of the front panel and pull it
out.
Remote control sensor
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals), this is not a
malfunction.
• To protect the front panel, place it in the supplied
carrying case.
Initial System Start-Up
Immediately after installing or applying power to the
unit, it should be initialized. Press the RESET switch
with a ballpoint pen or any other pointed object.
Attaching the Front Panel
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
Turning Power On and Off
1
Press the POWER button to turn on the unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
NOTE
The unit can be turned on by pressing any other button
except the eject c button.
2
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press and hold the POWER button for at least 3
seconds to turn off the unit.
1
NOTE
NOTE
The first time power is turned on, the volume will start
from level 12 and the unit will be in the tuner mode with
BBE on.
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
4-EN
Display Angle Adjustment
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
Movable display
1
Press the MODE (Audio Control) knob
repeatedly to choose the desired mode.
Each press changes the modes as follows:
→ VOL
→ BAL
→ FAD
The movable display may be adjusted to 3
different angles depending upon user preference.
NOTES
• If the 5 or 6 button is not pressed in 5 seconds after
selecting the BALANCE, or FADER mode, the unit
automatically returns to the VOLUME mode.
1
Press the ANGLE 89 button to adjust the angle
of the movable display.
• If the subwoofer or BBE modes are ON, their levels
can also be adjusted using the MODE button.
NOTES
• The display will close a half minute after the ignition
key is turned to the OFF position.
• The adjusted angle of the display is stored in memory.
There is no need to re-adjust the angle when the power
is turned back on.
2
Press the 5 and 6 buttons until the desired
sound is obtained in each mode.
CAUTION
Audio Mute Function
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
Activating this function will instantly lower the
volume level by 20 dB.
1
Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
Subwoofer On and Off
1
2
3
4
Press and hold the SETUP button for at least 3
seconds.
Press the g DN or f UP button to select
the Sub-w mode.
Press the BAND button to select Subwoofer ON
or OFF.
After setting is completed, press the SETUP
button to return to normal mode.
NOTES
• Initial mode is "Subwoofer ON."
• Set to "Subwoofer OFF" unless the subwoofer is used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader.
5
-EN
Ba sic Op e ra tion
SOURCE
BAND
DISP
2
BBE
g DN
SETUP
f UP
BASS.C
TREBLE.C
1
Selecting BBE Mode
Setting the Bass Control
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the signal
driving the speakers improves the accurate
reproduction of the sound.
You can change the Bass Frequency emphasis to
create your own tonal preference.
1
Press the BASS C. button to turn on the Bass
setting mode.
2-1
Setting the Bass frequency:
Press the g DN or f UP button to select
the desired Bass center frequency.
1
Press and hold the BBE button for at least 2
seconds to turn BBE on.
Each press toggles between the BBE on and off
modes.
60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz
Emphasizes the displayed Bass frequency ranges.
2-2
Setting the Bass Band Width (Q-Factor):
Press the BAND button to select the desired
Bass Band Width.
2
3
In BBE mode, press the BBE button to switch to
the BBE adjusting mode.
NOTE
→ WIDE1 → WIDE2 → WIDE3 → WIDE4
In BBE adjusting mode, wait 5 seconds without pressing
any button. The BBE adjusting mode is turned OFF.
(Wide) ............................... (Narrow)
←
→
To change to a desired BBE level, press the 5 or
6 buttons.
Changes the displayed frequency's band width to
wide or narrow.
The BBE level can be changed from +1 to +3.
2-3
Setting the Bass Level:
Press the 5 or 6 button to select the desired
Bass Level (-7~+7).
You can emphasize or weaken the bass
frequency.
NOTES
• If no buttons are pressed within 5 seconds, the Bass
control setting will be turned off automatically.
• The settings of the Bass and Treble will be individually
memorized for each source (FM, AM and CD) until the
setting is changed. Depending on the connected
devices, some functions and display indications do not
work.
6-EN
DISP OFF:
Setting the Treble Control
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio
Level indicator, and Bass engine displays are
not lit at all times.
You can change the Treble Frequency emphasis
to create your own tonal preference.
To light them, press the DISP button to exit DISP
OFF.
1
Press the TREBLE C. to turn on the Treble
setting mode.
NOTE
If no buttons are pressed within 5 seconds, the display
will return to normal mode automatically.
2-1
Setting Treble frequency:
Press g DN or f UP button to select the
desired Treble center frequency.
Setting the AUX Mode
10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
2-2Setting Treble Level:
Press the 5 or 6 button to select the desired
Treble Level (-7~+7).
1
2
3
4
5
Press and hold the SETUP button for at least 3
seconds.
You can emphasize the treble frequency.
NOTES
Press the g DN or f UP button to select
the AUX mode.
•If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
•The settings of the Bass and Treble will be individually
memorized for each source (FM, AM and CD) until the
setting is changed. Depending on the connected
devices, some functions and display indications do not
work.
Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
Press the SETUP button to return to normal
mode.
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
Changing Audio Level Display
Pattern
→ TUNER → CD → AUX
1
Press DISP button to switch the display pattern.
NOTE
When AUX ON is selected, a CD Changer cannot be used.
→ DISP1 → DISP2 → DISP OFF
DISP1:
Lights the Volume indicator and Audio Level
indicator.
Volume indicator
Audio Level indicator
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
Example setting:
Bass center frequency:
100 Hz
Bass band width: WIDE1
Bass level: -6
NOTE
The last mode set will remain in effect. The mode and
value bars light and show the Bass engine setting.
7-EN
Ba sic Op e ra tion
ZERO
CLK
HOUR
MIN
Displaying Time
Setting Time
1
Press the CLK (clock) button repeatedly until the
clock time is displayed.
1
While the clock time is displayed, press and hold
the CLK (clock) button for at least 3 seconds.
The time indication will begin to blink.
Each press changes the modes as follows:
2
3
4
Press the ZERO button while the time indication
is blinking to set seconds to "0".
Radio/Changer modes
Radio frequency or Playing
time mode
Clock priority
mode
↔
Press the HOUR button to adjust the hours while
the time indication is blinking.
CD Player mode
DISC TEXT
mode
Playing time
mode
Press the MIN button to adjust the minutes while
the time indication is blinking.
The time indication will stop blinking 5 seconds
after the last adjustment. The time will
automatically be set.
Clock priority
mode
→
→
→
←
TRACK
TEXT mode
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
8-EN
Ra d io Op e ra tion
BAND
SOURCE TUNE
f UP
g DN
Manual Tuning
Automatic Seek Tuning
1
Press the SOURCE button until a radio
frequency appears in the display.
1
Press the SOURCE button until a radio
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
Each press changes the band:
→ F1 (FM1) → F2 (FM2) → AM
→ F1 (FM1) → F2 (FM2) → AM
3
4
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
3
4
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
NOTE
The initial mode is DX SEEK.
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
Press the g DN or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
9
-EN
Ra d io Op e ra tion
SOURCE
A.ME
BAND/D.A.P.
Preset buttons (1 through 6)
Manual Storing of Station Presets
Automatic Memory of Station
Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
1
2
3
Press the SOURCE button to select the radio
mode.
2
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the station
frequency on the display blinks.
Press the BAND button repeatedly until the
desired radio band is displayed.
3
4
Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (9) and station
frequency memorized.
Press and hold the A. ME button for at least 2
seconds.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band. They
will be stored into presets 1 to 6 buttons in order
of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
10-EN
Storing into Direct Access Preset
(D.A.P.) Band
A combination of radio stations in any band (up to
6 stations) can be manually preset into the D.A.P.
band.
1
Press and hold the D.A.P. button for more than 2
seconds until the D.A.P. indicator appears.
Press the BAND button to select FM or AM.
The selected band will be displayed.
To memorize stations onto the D.A.P. band,
follow the steps for the Automatic or Manual
Storing of Station Presets section above.
NOTE
This function can be used together with the Automatic
Memory Preset.
To cancel the D.A.P. mode, press and hold the
D.A.P. button for more than 2 seconds. The
D.A.P. indicator will turn off.
Tuning to Preset Stations
1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired band is displayed.
To select the D.A.P. band, press and hold the
D.A.P. button for more than 2 seconds until the
D.A.P. indicator appears in the display.
3
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
11
-EN
CD Pla ye r Op e ra tion
-/J
SOURCE
Disc Select buttons (1 through 6)
f UP
TITLE
g DN
M.I.X.
REPEAT
SCAN
c
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will
begin.
When a disc is already inserted, press the
SOURCE button to switch to the CD mode.
The mode will change every time the button is
Opening and Closing the Movable
display
1
Press the c button.
The movable display will open.
pressed.
→ TUNER → CD → CD CHANGER*
(* Only when the CD changer is connected)
(Movable display fully opened)
3
4
To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
To close the movable display, press the c button
again.
The movable display will close.
To eject the disc, press the c button.
NOTES
NOTES
• Do not apply shock to the movable display when it is
open as it may result in malfunction of the unit.
• The display may be dim during low temperatures and
immediately after turning on the power. The brightness
will return to normal as time elapses.
• Three-inch (8cm) CD's can be used.
• If the CD does not eject, press c button again for
more than 3 seconds.
• Only compact discs containing the mark shown can be
used.
• The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
• We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
Music Sensor (Skip)
Playback
1
Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
1
Press the c button.
The movable display will open.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
Insert a disc with the label side facing up.
NOTE
The music sensor feature is functional in the play or
pause mode.
12-EN
Fast Forward and Backward
Displaying and Scrolling CD Text
1
Press and hold the g DN or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
While playing the audio CD with CD Text, the disc
and track names can be displayed and scrolled.
1
In CD mode, press the TITLE button repeatedly
to display Disc Text or Track Text.
Repeat Play
1
Press the REPEAT button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
NOTE
If your CD has no Text Information, NO TEXT appears.
2
Press and hold the TITLE button for at least 3
seconds to scroll the information stored on the
Press the REPEAT button again and select OFF
disc.
to deactivate the repeat play.
After scrolling, the display returns to normal
mode.
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected.
NOTE
SCROLL: the display is scrolled only when a disc is
loaded or when a track is changed and when the power
turn on during CD mode on this unit.
→
→
→
RPT RPT ALL
OFF
NOTE
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7871, you can control the CD changer
using the CDM-7871.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause
mode.
NOTE
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
The CD controls on the CDM-7871 for the CD changer
operation are functional only when the CD Changer is
interconnected with the CDM-7871.
1
2
Press the SOURCE button to activate the
CHANGER mode.
The display shows the "Changer", disc number
and track number.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTE
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
NOTES
Scanning Programs
• After selecting the desired disc, you can operate in the
same way as for the CD player.
For details, please see the CD Player Operation
section.
1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
• If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
13
-EN
Inform a tion
CD
In Case of Difficulty
CD Player/Changer not functioning.
• Out of operating temperature range +50˚C (+120˚F) for
CD.
- Allow the vehicle's interior (or trunk) temperature to
cool.
If you encounter a problem, please review the items in
the following checklist. This guide will help you
isolate the problem if the unit is at fault. Otherwise,
make sure the rest of your system is properly
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate
(about 1 hour).
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following
instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in
your unit can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
• Internal micro-computer malfunctioned due to
interference noise etc.
- Press the Reset switch with a ballpoint pen or other
pointed article.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
- Check your antenna connections; make sure the
antenna is properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken,
replace the antenna with a new one.
- Do not use a commercial abailable lens cleaner disc.
Consult your nearest ALPINE dealer.
CD playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press the c button. After the error indication
disappears, insert the disc again. If the above-
mentioned solution does not solve the problem,
consult your nearest ALPINE dealer.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its
mounting location.
14-EN
Indication for CD Changer
HI TEMP
Specifications
FM TUNER SECTION
Tuning Range
87.7 – 107.9 MHz
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity 80 dB
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
65 dB
35 dB
2.0 dB
ERROR - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530 – 1,710 kHz
22.5 µV/27 dB
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion
Dynamic Range
5 – 20,000 Hz (±1 dB)
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
NO MAGZN
• No magazine is loaded into the CD Changer.
- Insert a magazine.
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
45 W × 4
Maximum Pre-Output Voltage 2 V/10 k ohms
Maximum Subwoofer Output
Maximum Power Output
NO DISC
• No indicated disc.
- Choose another disc.
Voltage
Bass
Treble
4 V/10 k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
1.5 kg (3 lbs. 5 oz)
Weight
CHASSIS SIZE
Width
Height
178 mm (7")
50 mm (2")
Depth
155 mm (6-1/8")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6–3/4")
46 mm (1-13/16")
24 mm (15/16")
Due to continuous product improvement, specifications and
design are subject to change without notice.
15-EN
Insta lla tion a nd Conne c tions
Before installing or connecting the unit, please
read the following and pages 2 and 3 of this
manual thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill and experience. To ensure safety, always
contact the dealer where you purchased this product to
have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire
or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
Be sure to use only the specified accessory parts. Use of
other than designated parts may damage this unit internally
or may not securely install the unit in place. This may cause
parts to become loose resulting in hazards or product failure.
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like
the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through
a hole in metal, use a rubber grommet to prevent the wires
insulation from being cut by the metal edge of the hole.
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due
to electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual
to prevent obstructions when driving. Cables or wiring
that obstruct or hang up on places such as the steering
wheel, gear lever, brake pedals, etc. can be extremely
hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence
of moisture or dust. Moisture or dust that penetrates into
this unit may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying
capacity of the wire and result in fire or electric shock.
Precautions
• Be sure to disconnect the cable from the (–) battery post
before installing your CDM-7871. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the CDM-
7871 to the fuse box, make sure the fuse for the intended
circuit of the CDM-7871 has the appropriate amperage.
Failure to do so may result in damage to the unit and/or
the vehicle. When in doubt, consult your ALPINE dealer.
• The CDM-7871 uses female RCA-type jacks for
connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other
units. If so, please contact your authorized ALPINE
dealer for assistance.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such
precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or
any other safety-related system), or tanks should NEVER
be used for installations or ground connections. Using
such parts could disable control of the vehicle and cause
fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR
• Be sure to connect the speaker (–) leads to the speaker
(–) terminal. Never connect left and right channel
speaker cables to each other or to the vehicle body.
SCREWS OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
IMPORTANT
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR GEARSHIFT.
Please record the serial number of your unit in the
space provided below and keep it as a permanent
record. The serial number plate is located on the
bottom of the unit.
Doing so may obstruct forward vision or hamper
movement etc. and results in serious accident.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
16-EN
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming
from the left rear of the CDM-7871. Connect all other
leads of the CDM-7871 according to details
Installation
Metal plate
described in the CONNECTlONS section.
Detachable
Front panel
3
Caution
When you install this unit in your car, do not remove
the Detachable Front Panel.
Lock Pin
If the Detachable Front Panel is removed during
installation, you might press too hard and warp the
metal plate that holds it in place.
Slide the CDM-7871 into the dashboard. When the
unit is in place, make sure the locking pins are fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the
locking pin down with a small screwdriver. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install the
Detachable Front Panel.
1
Mounting Sleeve
(Included)
Dashboard
Removal
1 Remove the DETACHABLE FRONT PANEL.
2 Use a small screwdriver (or similar tool) to push
the locking pins to the "up" position (see above
drawing). As each pin is unlocked, gently pull out
on the unit to make sure it does not re-lock before
unlocking the second pin.
CDM-7871
Remove the Detachable Front Panel (refer to page
4). Slide mounting sleeve from main unit (see
"Removal" on this page).
3 Pull the unit out, keeping it unlocked as you do
so.
Slide the mounting sleeve into the dashboard.
<JAPANESE CAR>
2
Screw
Hex Nut (M5)
Face Plate
∗∗
Bolt Stud
Metal
Mounting
Strap
∗
Screws (M5 × 8)
(Included)
CDM-7871
CDM-7871
Ground Lead
Ground Lead
Chassis
∗
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw ( ) already
attached to the vehicle's chassis.
∗
Mounting Bracket
NOTE
NOTE
Secure the ground lead of the unit to a clean metal spot
using a screw ( ) already attached to the vehicle's
chassis.
For the screw marked **, use an appropriate screw for
∗
the chosen mounting location.
17-EN
Insta lla tion a nd Conne c tions
Connections
1
Antenna
POWER ANT
2
Blue
To power antenna
REMOTE
TURN-ON
3
4
5
6
Blue/White
Red
To amplifier or equalizer
IGNITION
Ignition Key
Speakers
BATTERY
GND
Yellow
Black
7
Battery
Gray
9
!
SPEAKER
RIGHT
Gray/
Black
FRONT
Front right
)
Violet/
Black
"
#
SPEAKER
RIGHT
REAR
Violet
8
Rear right
Rear left
Front left
Green $
SPEAKER
LEFT
REAR
Green/
Black
%
White/
Black
&
(
SPEAKER
LEFT
FRONT
White
~
CD Changer
(Sold Separately)
Speakers
Front Left
.
.
.
+
Amplifier
Front Right
Rear Left
,
-
Amplifier
Amplifier
Rear Right
Subwoofers
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 5.
18-EN
1 Antenna Receptacle
9 Right Front (+) Speaker Output Lead (Gray)
2 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
! Right Front (–) Speaker Output Lead (Gray/
Black)
" Right Rear (–) Speaker Output Lead (Violet/
Black)
NOTE
This lead should be used only for controlling the
vehicle's power antenna. Do not use this lead to turn on
an amplifier or a signal processor, etc.
# Right Rear (+) Speaker Output Lead (Violet)
$ Left Rear (+) Speaker Output Lead (Green)
% Left Rear (–) Speaker Output Lead (Green/
3 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Black)
& Left Front (–) Speaker Output Lead (White/Black)
4 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's
fuse box or another unused power source which
provides (+)12V only when the ignition is turned on
or in the accessory position.
( Left Front (+) Speaker Output Lead (White)
) DIN Connector
Connect this to the DIN connector on the CD
Changer.
~ DIN Extension Cable (Sold Separately)
5 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle's battery.
+ Front Output RCA Connectors
, Rear Output RCA Connectors
RED is right and WHITE is left.
6 Ground Lead (Black)
- Subwoofer RCA Connectors
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
RED is right and WHITE is left.
. RCA Extension Cable (Sold Separately)
NOTE
7 Fuse Holder (15A)
Older Alpine CD Changer came with standard, straight
type DIN connectors. In installations where an L-type
connector would simplify installation, the Alpine 491002
Adaptor can be used (Sold Separately).
8 Power Supply Connector
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car
chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various noise suppressors. Contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
19-EN
|