UltraslimBay DVD Drive
User's Guide
OPTIONS
by
Contents
Part 1. Using the DVD Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installing the DVD Drive in the UltraslimBay . . . . . . . . . 1-2
Installing the Hot/Warm Swap Driver (ThinkPad 600 Only) . . 1-3
Installing the Display Driver (ThinkPad 600 Only) . . . . . . . 1-4
Installing Programs
Viewing a DVD Movie
. . . . . . . . . . . . . . . . . . . . . . 1-6
. . . . . . . . . . . . . . . . . . . . 1-8
Part 2. Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Appendix A. Help and Service Information . . . . . . . . . 2-1
Step 1. Problem Solving
. . . . . . . . . . . . . . . . . . . 2-1
Step 2. Preparing for the Call . . . . . . . . . . . . . . . . . 2-2
Step 3. Placing the Call to IBM . . . . . . . . . . . . . . . . 2-2
Appendix B. Product Warranty . . . . . . . . . . . . . . . 2-3
Appendix C. Notices . . . . . . . . . . . . . . . . . . . . . 2-6
Copyright IBM Corp. 1998
iii
iv
Part 1. Using the DVD Drive
The UltraslimBay DVD drive (hereafter called DVD drive) supports the Before you begin the installation, make sure that the following items
ThinkPad 600 series computer, including the 600 or 600E in the
Windows 95 or Windows 98 environment. To use the DVD drive in
your computer, you need to install the software programs after
inserting the DVD drive into the UltraslimBay. This book explains
how to install the DVD drive and software programs.
are included in your option package:
DVD drive
This user's guide
DVD Software CD-ROM
(includes software programs for
DVD movies)
Display Driver Diskette
(NM2160) for Windows 98/95
(includes the display driver)
DVD Movie Playback
Hot/Warm Swap Driver
CD-ROM (includes the hot/warm
swap driver)
This UltraslimBay DVD drive is available for the ThinkPad 600E
and ThinkPad 600 systems. The ThinkPad 600E systems use the
Pentium II 300-MHz processor with the advanced graphics port
(AGP) and a video chip with motion compensation for DVD
movie playback. To view movies on a ThinkPad 600 model other
than the 600E model, you need a DVD adapter, such as a MARGI
Systems DVD-to-Go MPEG-2 DVD PCMCIA adapter. This
adapter takes advantage of the existing Zoom Video port on the
ThinkPad 600 system.
Note: You can check which version of Windows 95 you are using by doing
the following:
1. Click on Start, move the cursor to Settings, and then click on
Control Panel.
2. Double-click on System.
Read the numbers under “System.”
4.00.950B means that it is Windows 95 OSR2.0 or OSR2.1.
4.00.950C means that it is Windows 95 OSR2.5.
Copyright IBM Corp. 1998
1-1
3
Push the UltraslimBay device lock to the unlocked position 1 ;
then remove the device from the bay 2 .
Installing the DVD Drive in the
UltraslimBay
This section describes how to install the DVD drive. Before you
begin the installation, make sure that the DVD Software CD-ROM,
which includes software programs, was shipped with the DVD drive.
1
If a device is already installed in the UltraslimBay, go to “Removing a
Device from the UltraslimBay.”
If no device is installed, go to “Installing the DVD Drive in the
UltraslimBay” on page 1-3.
Removing a Device from the UltraslimBay
2
To remove a device from the UltraslimBay, do as follows:
1
2
Make sure there is no storage media inserted in the device.
Power off the computer, and remove the AC Adapter and
cables; then turn the computer upside down.
Notes:
1. If you want to warm swap the device in the UltraslimBay, you
need to install the hot/warm swap driver.
2. Make sure that the bay LED is off. Never remove the
UltraslimBay device when the bay LED is on.
You have now finished removing the device.
1-2
Installing the DVD Drive in the UltraslimBay
Installing the Hot/Warm Swap Driver
(ThinkPad 600 Only)
To install the DVD drive in the UltraslimBay, insert the drive into the
UltraslimBay. Make sure you connect the drive firmly.
If you are using the ThinkPad 600 computer (rather than a ThinkPad
600E computer) and you want to warm swap the DVD drive, you need
to install the hot/warm swap driver for Windows.
The following table shows the country code that you will need in the
instructions:
Country
Denmark
Finland
France
Germany
Italy
Code
DK
FI
Country
Netherlands
Norway
Code
NL
NO
SP
FR
GR
IT
Spain
Sweden
SW
US
United States
Japan
JP
You have now finished installing the DVD drive.
To install the hot/warm swap driver, do the following:
1
2
Start Windows 98 or Windows 95.
Insert the Hot/Warm Swap Driver CD-ROM into the DVD
drive.
Part 1. Using the DVD Drive 1-3
3
Click on Start and move the cursor to Settings; then click on
Control Panel.
Installing the Display Driver (ThinkPad
600 Only)
4
5
Double-click on Add New Hardware.
If you are using a ThinkPad 600 computer (rather than a ThinkPad
600E computer), you need to update the display driver before
installing the DVD movie player program.
Click on Next.
(For Windows 98, click on Next again.)
Installing the Display Driver for Windows 98
6
Select No and click on Next.
(For Windows 98, select No again and click on Next.)
To install the ThinkPad display driver for Windows 98, do the
following:
7
8
9
Click on Other devices, and click on Next.
Click on Have Disk....
1
2
3
4
Start Windows 98.
Click on Start.
Type X:\YY
Move the cursor to Settings; then click on Control Panel.
Note: X is the drive letter of the DVD drive, and YY is the country
code.
Double-click on the Display icon; then click on the Settings
tab.
10 Click on OK.
5
6
7
Click on Advanced....
11 Select UltraBay Hot/Warm Swap Driver, and click on Next.
12 Click on Finish.
Click on the Adapter tab.
Click on Change....
13 Restart the computer.
The Update Device Driver Wizard starts.
8
Click on Next.
1-4
9
Select Search for a better driver than the one your device is
using now. (Recommended) by clicking on it. Then click on
Next.
20 Set the Colors and Screen areas in the “Display Properties”
window.
21 Click on OK to close the window.
10 Put a check mark in the Floppy disk drives check box by
Installing the Display Driver for Windows 95
To install the display driver for Windows 95, do the following:
clicking on it.
11 Insert the Display Driver Diskette (NM2160) for Windows
98/95 into the diskette drive, and click on Next.
1
2
3
4
5
6
7
8
Start Windows 95.
12 When a message appears that Windows has found NeoMagic
Click on Start.
MagicGraph 128XD, click on Next.
Move the cursor to Settings; then click on Control Panel.
Double-click on Display; then click on the Settings tab.
Click on Advanced Properties.
If you are prompted for the source directory, type A:\
13 Click on Finish.
14 Remove the diskette from the diskette drive, and click on Yes to
restart the computer.
Click on the Adapter tab; then click on Change....
Click on Have Disk...
15 When the computer restarts, select screen settings for the color
palette, desktop area, and font size; then click on Close.
Insert the Display Driver Diskette (NM2160) for Windows
98/95 into the diskette drive, and click on OK.
16 Click on Start.
17 Move the cursor to Settings; then click on Control Panel.
18 Double-click on the Display icon.
19 Click on the Setting tab.
9
Click on NeoMagic MagicGraph 128XD; then click on OK.
10 Click on Close.
11 Remove the diskette from the diskette drive.
Part 1. Using the DVD Drive 1-5
i. Close all windows.
12 Select your screen parameters from the color palette, desktop
area, and font size; then click on Close.
14 Follow the instructions on the screen.
13 Specify the type of monitor as follows. (If you do not specify
the type of monitor you want to use, your new settings might
not function correctly.)
Windows 95 prompts you to restart your computer to make the
display driver change effective.
Installing Programs
a. Open the “Display Properties” window.
b. Click on the Settings tab.
If you want to view DVD movies, install the following programs from
the supplied CD-ROM to your hard disk:
c. Click on Advanced Properties.
DVD Movie Player (DVD Express)
DirectX 5.0
d. In the “Advanced Display Properties” window, click on the
Monitor tab.
After installing the programs, you need to select the region code.
e. Click on Change....
If you are not going to watch DVD movies—that is, if you are going
to use the DVD drive only for reading DVD-ROMs or
CD-ROMs—you do not need to install these programs.
f. Click on Show all devices.
g. Specify Manufacturers and Models in the next window.
For example,
To install the software programs, do as follows:
If you are using the LCD:
Installation Instructions for Windows 98
Manufacturers:
Models:
(Standard monitor types)
Laptop Display Panel
(1024x768)
To install the DVD movie player program for Windows 98, do the
following:
1
2
3
Insert the DVD Software CD-ROM in the DVD drive.
Click on Start and Run...
If you are using the external monitor:
Manufacturers:
Models:
(Standard monitor types)
Plug and Play Monitor
Type X:\DVDPLAYR\SETUP and press Enter.
h. Click on OK.
1-6
Note: X is the drive letter of the DVD drive.
Selecting the Region Code
DVD Region Codes
Follow the instructions on the screen.
Regional coding is part of the protection scheme for DVD content.
The world is divided into six regions, so that specific content can
be viewed only in the region where it is appropriate. For
example, Region 1 (U.S. and Canada) content can be viewed only
in Region 1. The DVD Movie Player Program application is also
region–specific.
Installation Instructions for Windows 95
To install the DVD movie player program for Windows 95, do the
following:
1
Install DirectX 5.0 (for OSR2.0 or OSR2.1 users).
a. Insert the DVD Software CD-ROM in the DVD drive.
b. Type X:\DX5 \SETUPDX5.EXE and press Enter.
Note: X is the drive letter of the DVD drive.
You must select a region to play DVD content. After you have
selected a region, you can play content only from that region.
You cannot change the region code without reformatting the
drive and reinstalling Windows 98.
Make sure the first DVD content you play is from the appropriate
region. You can verify the region code of the content by looking
at the region code symbol on the back of the content packaging.
c. Shut down and restart the system.
2
Install the DVD movie player program.
a. Insert the DVD Software CD-ROM into the DVD drive.
b. Click on Start and Run....
Attention: If the first DVD you play is from a region other than
the region you selected, your system will no longer play DVD
content. Contact the IBM PC HelpCenter. See Appendix A,
“Help and Service Information” on page 2-1.
c. Type X:\DVDPLAYR\SETUP and press Enter.
Note: X is the drive letter of the DVD drive.
Part 1. Using the DVD Drive 1-7
To select the region code, do the following:
Viewing a DVD Movie
1
Click on Start, move the cursor to Programs and Mediamatics
DVD Express, and then click on Mediamatics DVD Player.
After you install the DVD drive and the programs, you can view a
DVD movie by doing the following:
The “Select DVD Region” window appears.
1
Insert a DVD into the DVD drive.
2
Select the region code and click on OK.
If you want to watch a DVD movie on your TV, refer to the
ThinkPad 600E User's Reference.
Region
Code
Country
2
3
Click on Start, move the cursor to Programs, and click on
Mediamatics DVD Express.
1
2
3
4
5
6
U.S, Canada
Europe, Middle East, South Africa, Japan
Southeast Asia, Taiwan, Korea
Latin America, Australia, New Zealand
Former Soviet Union, the rest of Africa, India
People's Republic of China
Click on the Mediamatics DVD Player.
The “DVD movie player” window appears. For more
information on how to play the DVD movie player, see the
Online User's Guide.
Notes:
1. Your computer has been configured to provide the highest quality audio
and video playback based on the available system resources. You can
alter the default settings by changing the video resolution setting within
the Control Panel of Windows 95 or Windows 98. Some systems do not
have enough resources to provide full-quality audio and video playback at
all resolution settings. If you experience poor playback performance,
adjust the resolution to a lower setting.
Follow the instructions on the screen.
2. Audio or video streams are decoded in software. The audio and video
subsystems need to be fully functional and enabled.
1-8
Part 2. Appendixes
location. Your technical support representative can help you
determine the best alternative.
Appendix A. Help and Service
Information
Step 1. Problem Solving
If you have questions about your new Options by IBM product, or
require technical assistance, visit the IBM Personal Computing Support
IBM, IBM PC products, or Options by IBM, visit the IBM Personal
receive information from the IBM Automated Fax system at
1-800-426-3395 (in Canada, 1-800-465-3299), or from the Personal
Systems Group Bulletin Board System (PSG BBS) at 1-919-517-0001.
You can also get help and information through the IBM PC
You may be able to solve the problem yourself. Before calling the
HelpCenter, please prepare for the call by following these steps:
1. If you are having installation or configuration problems, refer to
the detailed sections on installation found in this manual, and
review any README.TXT files found on the installation
diskettes.
2. Visit the Personal Computing Support Web site specific to the
model of option you have purchased. Updated installation
instructions, hints and tips, or updated system-specific notes are
often published in this section. You might find that later device
drivers are available that will improve the performance and
compatibility for your new option.
HelpCenter, 24 hours a day, seven days a week. Response time might
vary depending on the number and nature of the calls received.
Marketing, installation, and configuration support through the
HelpCenter will be withdrawn or made available for a fee, at IBM’s
discretion, 90 days after the option has been withdrawn from
marketing. Additional support offerings, including step-by-step
installation assistance, are available for a nominal fee.
If you are installing this option in an IBM computer, also visit the
applicable support Web page for that computer model. These
pages might also contain useful hints and tips related to
installation of this option and might refer to BIOS or
device-driver updates required for your computer model. If you
are installing the option in a non-IBM computer, refer to the
manufacturer’s Web site.
During the warranty period, assistance for replacement or exchange of
defective components is available. In addition, if your IBM option is
installed in an IBM computer, you might be entitled to service at your
Copyright IBM Corp. 1998
2-1
3. Uninstall and then reinstall the option. During the uninstallation
process, be sure to remove any files that were installed during the
previous installation. Many IBM options include uninstallation
programs.
Step 3. Placing the Call to IBM
If you call 90 days or more after the date of withdrawal or after your
warranty has expired, you might be charged a fee.
4. Check all cabling to be sure that it is correct as shown in this
manual. When you connect a cable to a cable connector, pay
close attention to the colored stripes along the edge of the cable,
and ensure that they are matched with PIN 1 on both the
computer connector and the option connector.
For the support telephone number and support hours by country, refer
to the following table or to the enclosed technical support insert. If
the number is not provided, contact your IBM reseller or IBM
marketing representative.
Support 24 hours a day, 7 days a week
5. If your option contains jumpers or switches, be sure their
positions and orientation match the instructions in this manual.
Canada
1-800-565-3344
1-800-772-2227
U.S.A. or Puerto Rico
Step 2. Preparing for the Call
To assist the technical support representative, have available as much
of the following information as possible:
Additional Technical Support Resources
Online technical support is available during the life of your product.
Online assistance can be obtained through the Personal Computing
Support Web site, the PSG Electronic Bulletin Board System (BBS),
and the IBM Automated Fax System.
1. Option name
2. Option number
3. Proof of purchase
4. Computer manufacturer, model, serial number (if IBM), and
manual
5. Exact wording of the error message (if any)
6. Description of the problem
7. Hardware and software configuration information for your system
Online Technical Support
IBM Personal Computing Support
Web site
IBM PSG BBS
1-919-517-0001
If possible, be at your computer. Your technical support representative
might want to walk you through the problem during the call.
IBM Automated Fax System
1-800-426-3395
1-800-465-3299 (in Canada)
2-2
The IBM Warranty for Machines
Appendix B. Product Warranty
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM's Official Published Specifications. The
warranty period for a Machine is a specified, fixed period commencing on its
Date of Installation. The date on your receipt is the Date of Installation, unless
IBM or your reseller informs you otherwise.
The following warranty information applies to products purchased in
the United States, Canada, and Puerto Rico. For warranty terms and
conditions for products purchased in other countries, see the enclosed
warranty insert, or contact your IBM reseller or IBM marketing
representative.
During the warranty period IBM or your reseller, if authorized by IBM, will
provide warranty service under the type of service designated for the Machine
and will manage and install engineering changes that apply to the Machine.
International Business Machines Corporation
Armonk, New York 10504
For IBM or your reseller to provide warranty service for a feature, conversion,
or upgrade, IBM or your reseller may require that the Machine on which it is
installed be 1) for certain Machines, the designated, serial-numbered Machine
and 2) at an engineering-change level compatible with the feature, conversion,
or upgrade. Many of these transactions involve the removal of parts and their
return to IBM. You represent that all removed parts are genuine and unaltered.
A part that replaces a removed part will assume the warranty service status of
the replaced part.
Statement of Limited Warranty
The warranties provided by IBM in this Statement of Limited Warranty apply
only to Machines you originally purchase for your use, and not for resale, from
IBM or your reseller. The term “Machine” means an IBM machine, its features,
conversions, upgrades, elements, or accessories, or any combination of them.
Unless IBM specifies otherwise, the following warranties apply only in the
country where you acquire the Machine. If you have any questions, contact IBM
or your reseller.
If a Machine does not function as warranted during the warranty period, IBM
or your reseller will repair it or replace it with one that is at least functionally
equivalent, without charge. The replacement may not be new, but will be in
good working order. If IBM or your reseller is unable to repair or replace the
Machine, you may return it to your place of purchase and your money will be
refunded.
Machine: UltraslimBay DVD Drive
Warranty Period*: One year
*Contact your place of purchase for warranty service information.
If you transfer a Machine to another user, warranty service is available to that
user for the remainder of the warranty period. You should give your proof of
purchase and this Statement to that user. However, for Machines which have a
lifetime warranty, this warranty is not transferable.
Production Status
Each Machine is manufactured from new parts, or new and used parts. In
some cases, the Machine may not be new and may have been previously
installed. Regardless of the Machine's production status, IBM's warranty terms
apply.
Appendix A. Help and Service Information 2-3
Warranty Service
Extent of Warranty
To obtain warranty service for the Machine, you should contact your reseller or
call IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call
IBM at 1-800-565-3344. You may be required to present proof of purchase.
IBM does not warrant uninterrupted or error-free operation of a Machine.
The warranties may be voided by misuse, accident, modification, unsuitable
physical or operating environment, improper maintenance by you, removal or
alteration of Machine or parts identification labels, or failure caused by a
product for which IBM is not responsible.
IBM or your reseller will provide certain types of repair and exchange service,
either at your location or at IBM's or your reseller's service center, to restore a
Machine to good working order.
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM JURISDICTION TO JURISDICTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE
ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO
YOU. IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES
APPLY AFTER THAT PERIOD.
When a type of service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property, and the replacement
becomes yours. You represent that all removed items are genuine and
unaltered. The replacement may not be new, but will be in good working order
and at least functionally equivalent to the item replaced. The replacement
assumes the warranty service status of the replaced item. Before IBM or your
reseller exchanges a Machine or part, you agree to remove all features, parts,
options, alterations, and attachments not under warranty service. You also
agree to ensure that the Machine is free of any legal obligations or restrictions
that prevent its exchange.
You agree to:
1. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
2. where applicable, before service is provided —
Limitation of Liability
a. follow the problem determination, problem analysis, and service
request procedures that IBM or your reseller provide,
b. secure all programs, data, and funds contained in a Machine, and
c. inform IBM or your reseller of changes in a Machine's location.
Circumstances may arise where, because of a default on IBM's part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract
or tort claim), IBM is liable only for:
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM's possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2-4
2. the amount of any other actual direct damages or loss, up to the greater of
U.S. $100,000 or the charges (if recurring, 12 months' charges apply) for
the Machine that is the subject of the claim.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF
THE FOLLOWING:
1. THIRD-PARTY CLAIMS AGAINST YOU FOR LOSSES OR
DAMAGES (OTHER THAN THOSE UNDER THE FIRST
ITEM LISTED ABOVE);
2. LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA;
OR
3. SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR
ANY ECONOMIC CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFITS OR SAVINGS), EVEN IF IBM
OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
Appendix B. Product Warranty 2-5
Trademarks
Appendix C. Notices
The following terms are trademarks of the IBM Corporation in the
United States or other countries or both:
References in this publication to IBM products, programs, or services
do not imply that IBM intends to make these available in all countries
in which IBM operates. Any reference to an IBM product, program,
or service is not intended to state or imply that only that IBM product,
program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any of the
intellectual property rights of IBM may be used instead of the IBM
product, program, or service. The evaluation and verification of
operation in conjunction with other products, except those expressly
designated by IBM, are the responsibility of the user.
IBM
ThinkPad
DirectX, Windows, Windows NT, Windows 95, and the Windows 95
flag logo are trademarks or registered trademarks of Microsoft
Corporation.
DVD-to-Go is a trademark of MARGI Systems.
Other company product, and service names, which may be denoted by
a double asterisk (**), may be trademarks or service marks or others.
IBM may have patents or pending patent applications covering subject
matter in this document. The furnishing of this document does not
give you any license to these patents. You can send license inquiries,
in writing, to the IBM Director of Licensing, IBM Corporation, 500
Columbus Avenue, Thornwood, NY 10594, U.S.A.
2-6
IBM
Part Number: 27L2579
Printed in the United States of America
27L2579
|