®
10 SECOND ESP PLUSTM
ELECTRONIC SHOCK PROTECTION
PROGRAMMABLE COMPACT DISC PLAYER
WITH CAR ADAPTOR KIT
MODEL CD-79
OPERATING INSTRUCTIONS
PLAYS ALL MUSIC COMPACT DISCS
BASS BOOST SYSTEM
6 DIGIT LCD VISUAL DISPLAY
•
•
•
TRACK REPEAT & DISC REPEAT
•
10 SECOND ESP (ELECTRONIC SHOCK PROTECTION) PLUSTM SYSTEM
•
DELUXE STEREO HEADPHONES INCLUDED
CAR POWER CORD AND CASSETTE ADAPTOR INCLUDED
AC ADAPTOR INCLUDED
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)
•
•
•
•
AUX OUT JACK - CONNECTS TO YOUR STEREO SYSTEM
•
PLEASE READ CAREFULLY BEFORE USE
CD79(12D-10E2)011240 NL v.1
E
2
LOCATION OF CONTROLS
5
6
4
7
3
8
9
10
11
12
2
13
1
14
15
16
1. CD DOOR OPEN BUTTON (slide to open)
2. CD DOOR
3. BACKWARD SKIP/SEARCH BUTTON (
4. PROGRAM BUTTON
)
5. FORWARD SKIP/SEARCH BUTTON (
)
6. ESP+ (electronic shock protection) BUTTON
7. STOP AND POWER OFF BUTTON
8. REPEAT/RANDOM BUTTON
9. LCD DISPLAY
10. PLAY/PAUSE BUTTON
11. AC ADAPTOR JACK
12. AUX OUT JACK (for home stereo connection)
13. VOLUME CONTROL
14. PHONES JACK (headphones jack)
15. BATTERY DOOR
16. BASS BOOST SWITCH
3
POWER SOURCES
1.Using with Batteries
Insert two size AA alkaline batteries
according to the + and - markings in
the battery compartment.
TIPS ON BATTERY USE
Reversing polarities will damage the batteries and possibly your set. Be sure to
follow polarity ( + and - ) as indicated.
•
•
•
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),
or old batteries with new ones.
When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to your player.
When the batteries have become discharged, they must be disposed of in a safe
manner that complies with all applicable laws.
•
•
Installation of batteries should only be done by an adult (for safety).
ALKALINE BATTERY LIFE
Bear in mind that battery life expectancy is based upon volume and bass listening
levels.
Maximum battery power consumption happens at maximum settings. Typical life
for 2 size “AA” alkaline batteries is above 8 hours of continuous use.
WHEN
FLASHES IN THE DISPLAY
If the alkaline batteries are weak and discharged, this symbol “
” flashes in the
display, then the power automatically turns off. If this occurs, replace the alkaline
batteries (also if display does not show anything, the batteries are dead).
NOTE: You may use rechargeable batteries on this set. However, because
rechargeable batteries generally have lower voltage (1.2 volts instead of
1.5 volts). Your playing time will be much less than normal fresh alkaline
batteries.
4
2.Using AC Power
Your player may be powered from any household 120V AC outlet, using the AC
adaptor included. Insert the adaptor’s small connector plug into the DC 4.5V Jack
marked
on player (on the right side of the set), and plug the adaptor into
an AC outlet.
NOTE: If the AC Adaptor is connected, and regular batteries are installed, the
player automatically switches to the AC Adaptor power and the batteries
are not used.
CAUTION:
To prevent electric shock, do not use this AC Adaptor with an extension cord or
outlet, unless it can be fully inserted without exposing any part of the blades. Do
not use any other AC adaptor to power this set or you may damage your set.
3.Using Cigarette Lighter Adaptor
Use the cigarette lighter adaptor to supply power to
Cigarette Lighter
your player and conserve battery life when using the
CD player in a car (no batteries are needed).
Indicator
Plug the adaptor into the car cigarette lighter. Insert
firmly, and the cigarette lighter indicator will light up.
•
Plug the other end into the DC 4.5V Jack on the right
of the set.
•
If there is no power, your fuse may have blown. To
change fuse on cigarette lighter adaptor, unscrew
the tip. Replace only with same 1A 250V fuse.
•
CAUTION:
Use this set only with the supplied cigarette lighter adaptor. Use with other cigarette
lighter adaptors could damage the set.
•
When the inside of the cigarette lighter socket is dirty with ashes, the plug section may
become hot due to poor contact. Be sure to clean your car cigarette lighter socket
before use.
•
After use, disconnect the cigarette lighter adaptor plugs from both the set and the
cigarette lighter socket.
•
•
•
The cigarette lighter adaptor may cause interference with reception to the car radio. If
this happens, disconnect the cigarette lighter adaptor from the cigarette lighter socket.
Do not leave the cigarette lighter adaptor plugged in without your car’s motor running,
your car’s battery may drain in some models of cars that supply power to the cigarette
lighter plug even with the car’s keys removed.
CASSETTE ADAPTOR
5
The car cassette adaptor allows you to use your CD player with your car stereo
cassette system or portable audio cassette system.
1. Insert the car cassette adaptor in the same direction as you would insert an audio
cassette tape, with the side marked THIS SIDE UP facing upwards.
2. If the car cassette adaptor cord is on the wrong side
of the tape, reposition the cord by following the
instructions below.
3. Insert the car cassette adaptor stereo plug into the
AUX OUT jack on the right of the CD player.
4. Turn on the cassette player. Press PLAY button on
the cassette player.
5. Press PLAY on the CD player.
6. Adjust the volume on your cassette player.
TO AUX OUT JACK
7. When done, leave the cassette player on and first
eject the adaptor, then turn off cassette player.
Reposition the cord
The cord should extend out from the cassette player
when the cassette is inserted (direction depending
on your tape player).
1. To reposition the cord, remove the top plate by
Fig. 2
Fig. 1
removing 2 screws with a dime (see Fig. 1).
2. Reposition the cord so that it comes out from
other positions (see Fig. 2).
Remove two large
screws with a dime
or screwdriver
Move cord to desired
position (three cord
positions)
3. Replace the cover and the screws.
NOTE: The car cassette adaptor has the play head on one side
only. If the cassette adaptor keeps ejecting out, or the sound is weak, press
the REVERSE button on your cassette player to change direction or reverse
the adaptor.
CONNECTING TO HOME STEREO SYSTEMS
The AUX OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the
cable’s mini plug to the AUX OUT jack on your player, and the other appropriate end
usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
YOUR CD PLAYER
YOUR STEREO
SYSTEM
TO AUX OUT JACK
OPTIONAL CABLE (3.5mm)
TO RCA JACKS
TO AUX IN JACKS
CD PLAYING
6
1 Load the Disc.
Push
here
Disc
Label side up
Slide right to open
2 Connect the Headphones.
Stereo headphones
To PHONES jack
3 Press the PLAY/PAUSE button.
PLAY/PAUSE
button
TOTAL TRACKS TOTAL PLAYING
TIME ON THE CD
TRACK NUMBER ELAPSED PLAYING
CURRENTLY TIME OF THE
PLAYING CURRENT TRACK
VOLUME CONTROL
4 Adjust the Volume.
7
Other Operations
Operation
Display window shows
Press
PLAY/PAUSE
button
To pause play
TRACK NUMBER
CURRENTLY PLAYING
PLAYING TIME
FLASHES
To release pause
and resume play
PLAY/PAUSE
button
TRACK NUMBER
CURRENTLY PLAYING
PLAYING TIME
ADVANCES
To stop
STOP button
TOTAL TRACKS
TOTAL PLAYING TIME
STOP button once and wait 30 seconds, or press
STOP button twice
To turn off the power
To skip to the next track(s)
once (or repeatedly)
once (or repeatedly)
To skip to the previous track(s)
To go ahead at high speed
(search)
Keep
depressed and release when the
desired music section of the disc is found.
To go back at high speed
(search)
Keep
depressed and release when the
desired music section of the disc is found.
BASS BOOST switch
This switch enhances the low frequency (bass)
sounds at low listening levels. Switch this ON or
OFF to suit your taste.
BASS BOOST switch
8
REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro or random play using the REPEAT/RANDOM button.
Press the REPEAT/RANDOM button several times, and the display will show the
followings in turn:
REPEAT
1
--> REPEAT ALL --> INTRO --> SHUFF (RANDOM) --> NORMAL PLAY
Single Track Repeat
Plays one song over and over till you press STOP.
During play, select the song you want to repeat with
X 1
either of the SEARCH buttons (
the REPEAT/RANDOM button once, the symbol REPEAT
appears in the display.
or
), then press
1
REPEAT 1
The song currently playing will repeat over and over,
until you press STOP.
All Tracks Repeat
Repeats all songs in order, till you press STOP.
X 2
During play, press the REPEAT/RANDOM button twice,
the symbol REPEAT ALL will show in the display.
All songs will keep playing in sequence 1, 2, 3, etc. and
when finished, will start all over again until you press the
STOP button.
REPEAT ALL
Intro Play
This plays the first 10 seconds of songs in sequential
order.
1. During play, press the REPEAT/RANDOM button
three times, the word INTRO will flash in the display.
2. Press the PLAY button, the word INTRO will stop
flashing and the first 10 seconds of each song on the
CD will play in sequential order.
X 3
3. When you find a song you like, press the PLAY button,
normal play will be resumed, that song (and the
following songs) will play NORMALLY.
INTRO
Random Play
This plays the songs on the disc in a random order.
1. During play, press REPEAT/RANDOM button four times
the word SHUFF will flash.
X 4
2. Press the PLAY button, this will play all of the songs
in random order selected by the CD player. The word
SHUFF will stop flashing.
SHUFF
3. Press the SEARCH button
to skip to the next
random song.
9
PROGRAM PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number
etc.
etc.
1
3
2
5
3
8
4
1
5
2
6
4
7
1
8
1
Track Number (song number)
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.During play, press the PROGRAM 3.Press the PROGRAM button. Track 3 is
button.
now programmed.
Program #2 will now show in the
display, ready for your next selection of
track.
PROG
The word PROG will flash in the display.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
PROG
5.After programming is finished, press
PLAY to begin programmed play.
PROG changes to be steady on in
the display, and music begins to play in
the order you programmed.
Program number
2.Press the SEARCH button (
or
)
to select track number 3 (example). PROG
and track number “03” will flash in the
display.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY
button to re-start normal play.
PROG
Your programming will be lost:
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
•
Track number
When the power is shut off or the CD
DOOR is opened.
•
10 SECOND ESP PLUSTM SYSTEM
10
This set is designed with 10 second ESP (Electronic Shock Protection) PLUSTM - which
allows virtually unlimited gentle skip protection, and 10 second normal shock protection.
The ESP PLUSTM function prevents the sound from skipping by using a buffer memory
that stores music data. The new ESP PLUSTM system can store more music than
normal anti-skip systems.
This new design allows gentle swaying of the set without music skipping as in walking.
This set will not work during jogging.
Press the ESP+ button to turn on the ESP PLUSTM system. Press
it again to turn it off.
When the ESP PLUSTM function is switched ON or OFF during
play, the sound will be interrupted for a few seconds. This is
normal.
When the ESP+ button is pressed during play, the “
” (memory
basket) indicator will appear in the display, the digital data
equivalent to approximately 10 seconds of music is stored in the
“read-ahead” memory buffer before it is decoded and played.
EMPTY MEMORY
The “ ” mark changes to the “
memory buffer (basket) is full.
” mark, indicating that the
When the set is subject to a shock or a bump during play, the
data stored in memory continues to be decoded and played.
This gives the pickup time to stabilize and continue reading
new music. As the data is used from memory, the indicator
•
FULL MEMORY
changes from “ ” to “
original position, new data is stored in memory and the display
changes back to the “ ” mark.
If the set is subject to repeated shocks and all the data stored
in memory is used up, the “ ” mark is displayed and the
”. Once the pickup returns to its
•
SOME MEMORY USED
sound will skip or stop for a brief period until the memory basket
has time to fill up again.
To turn off the 10 second ESP PLUSTM function, press the ESP+
button again.
•
•
Keep the digital ESP PLUSTM function off when using the set in ALL MEMORY USED UP
a stable, no vibration area, where it will not receive shocks.
The batteries will last longer when the ESP function is off.
NOTE:
- The music may stop if the player receives continuous shocking.
- You may hear noise or skipping if the CD is dirty or scratched.
- If during ESP play, you press PLAY/PAUSE, or SEARCH buttons,
the memory basket will empty itself temporarily.
11
MAINTENANCE
Handling Compact Discs
Cleaning the lens
Dirty, scratched or warped discs may
cause skipping or noise.
•
A dirty lens will cause sound skipping. If
the lens is very dirty, the player may not
work. We suggest using a special cleaning
disk (not included) available in most music
and Hi-Fi stores. However, if you do not
have one, you may use a cotton swab
very slightly dampened with alcohol to
clean the lens.
Handle the disc only by the edges. To
keep clean, do not touch its surface.
•
Discs should be stored in their cases
after use to avoid scratches.
•
•
Do not expose discs to direct sunlight,
high humidity, high temperatures, or
dust, etc. Prolonged exposure to
extreme temperatures can warp the disc
(such as leaving the discs in your car
during summertime).
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is
very dirty, dampen (not dripping wet) the
cloth with a weak solution of soapy water,
and then wipe clean.
Do not stick or write anything on either
side of disc. Sharp writing instruments, or
the inks used in some felt-tip pens, may
damage its surface.
•
Cleaning the Discs
To remove the Disc
Fingerprints should be carefully wiped
•
Open the CD DOOR by sliding the DOOR
OPEN button, hold the disc by the edge
while slightly pressing on the center
spindle as illustrated, then lift it from the
edge to release and remove.
from the surface of disc with a soft cloth.
Unlike conventional records, compact
discs have no grooves to collect dust
and microscopic dirt, so gently wiping
them with a soft cloth should remove
most particles. Wipe in a straight
motion from the center to the edge.
NOTE
Always press the STOP button and wait
for the disc to stop rotating before sliding
the DOOR OPEN button to remove the
disc.
Never use thinner, benzine, record
•
cleaner or antistatic spray on a compact
disc. Such chemicals can damage its
plastic surface.
12
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the CD door is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The set’s cabinet may warp or the set may be damaged if it is placed in direct sunlight,
near heaters (where the temperature is 1400F/600C or higher) or in cars with the
windows closed. In the summer, the temperature may get as high as 2120F/1000C or
more.
Use the set within a temperature range of 410F/50C to 950F/350C.
Use ONLY the AC Adaptor provided, others may damage your set. Disconnect the
Adaptor from the wall outlet when the set is not to be used for an extended period of
time (3 days or more).
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with your set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels. Listening
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the
interest of safety, it is strongly advised against the use while engaging in activities
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be
hazardous. Also loud volume can hurt your ears. If you notice that the sound has
become weak or distorted or if tracks do not change, this is an indication that your
batteries are weak. Replace both batteries at the same time (see Using with Batteries).
Your CD-79 is identified by a serial number located in the Battery Compartment. Record
this number in the space provided below.
Model CD-79 Serial No.
Date Purchased:
This manual contains detailed information on its safety and use. Please read it carefully
so that you may take full advantage of its many features, and ensure a safe reliable
operation. Keep this manual for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass.
This is called condensation. Condensation may occur on internal operating parts of the
lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold
room to a room which is heated, or in the summer, if the set is moved from an air-
conditioned room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
13
IMPORTANT REQUIREMENT BY THE FCC
Since the CD circuitry may cause interference to other radios nearby, switch this
set off when not in use or move it away from the affected radios.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
•
•
•
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet safety standards of the FCC
requirements and comply with safety performance of the U.S. Department of Health
and Human Services, and also with FDA Radiation Performance Standards 21 CFR
Subchapter J.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Unauthorized recording of copyrighted material may violate laws. Do not copy songs
without permission of the copyright holder.
•
•
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
TROUBLE SHOOTING GUIDE
14
Causes
Symptoms
Solutions
Batteries are weak (they Replace both batteries with fresh
may test OK on tester but alkaline batteries. Battery life with fresh
they are weak for CD batteries is above 8 hours (rechargeable
Tracks do not
change or set
does not play
normally.
operation).
batteries have 1/2 of that life).
Dead or weak batteries.
Replace both batteries with fresh ones.
Check AC Adaptor connection at AC
outlet and the right side of set.
CD Player will not
turn on.
AC Adaptor not
connected properly.
Disc inserted incorrectly.
Defective compact disc.
CD DOOR not closed.
Re-insert disc with label side facing up.
Try another compact disc.
Close the door securely.
Disc will not play.
Take out the CD and leave the CD
DOOR open for about 20 minutes to
dry the moisture condensation.
Re-insert headphone plug into
PHONES jack (not AUX OUT).
Moisture has formed
inside the CD deck.
Headphone plug not
inserted properly.
Increase the volume.
VOLUME control set to
minimum.
No sound from
headphones.
Replace with fresh batteries or use AC
Adaptor.
Weak batteries.
Try another compact disc.
Defective compact disc.
Plug headphones into PHONES jack.
(NOT THE AUX OUT JACK)
Headphones plugged into
AUX OUT jack.
VOLUME control
has no function.
The compact disc or
lens is dirty or CD is
scratched.
Clean or replace the compact disc or
clean the lens.
Sound is skipping
or sound stops.
Press the ESP+ button to start the ESP
PlusTM function, or place the player on
a stable level.
Strong vibrations.
Music is too loud.
Lower the VOLUME control.
Sound is distorted.
BASS BOOST is ON.
Slide BASS BOOST switch to OFF.
Replace both batteries or use AC Adaptor.
Weak batteries.
Remove batteries and Adaptor. Wait
15 seconds and re-insert. Make sure
batteries are fresh or Adaptor has
power.
Electronic or static error
caused circuitry to lock.
Buttons do not
work.
Press the REVERSE button on your
cassette player or reverse the
adaptor.
Car Cassette
Adaptor ejects
from radio.
Your car may have special
cassette player.
Cigarette Lighter
Adaptor has no
power or Cigarette
Lighter Indicator
does not light up.
Insert Adaptor firmly and fully (make
sure socket is clean).
Poor contact.
Unscrew Adaptor tip and replace fuse
inside the Adaptor. Also check the
Car’s fuse.
Fuse is blown.
15
TECHNICAL SPECIFICATIONS
CD Player Section
Frequency response .............................. 50Hz - 15kHz (+1/-2 dB)
Wow and flutter ...................................... Below measurable limits
Sampling frequency ................................ 44.1KHz
D/A converter ......................................... 1-bit
Error correction method .......................... CIRC
Pickup ................................................... Optical 3-beam semiconductor laser
(780 nm wavelength)
Laser diode material GaAIAs
Laser output less than 44.6µw
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
General
Maximum output (stereo headphones) .....
Power Supply
20mW + 20mW
AC adaptor ...........................................
DC .......................................................
120V/60Hz
3V: Using 2 size “AA” batteries
Set Dimensions (approximate)
Width ...............................................
Depth ..............................................
Height ..............................................
Weight (approximate) ...........................
5 1/4"
6"
1 1/8"
9.5oz. (270g) (set only)
Because the products are subject to continuous improvement, Lenoxx reserves the
right to modify product designs and specifications without notice and without incurring any
obligation.
For customer service Dial 1-800-315-5885
(MONDAY - THURSDAY 09:00 AM - 5:00 PM, FRIDAY 09:00 AM - 1:00 PM EST)
© 2000 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
|