Magnavox AJ 3140 User Manual

SAFETY  
Installation  
Clock / Radio  
Slumber  
Maintenance  
POWER CONNECTION  
SETTING THE CLOCK  
SLUMBER TIME  
MAINTENANCE  
Know these safety sym bols  
WARNING  
To reduce the risk of fire or electric  
shock, do not expose this appliance  
to rain or m oisture.  
C AUTION  
If you do not intend to use the clock radio for a  
long time, disconnect the unit by removing the  
plug from the wall outlet. The battery should  
also be removed to prevent danger of leakage  
which will damage your unit.  
To clean your unit from fingerprints, dust and  
dirt, use a clean, soft, damp cloth or chamois  
leather. Do not use cleaning products which  
contain benzene, thinner, etc. as these may  
harm the housing.  
1. Check if the AC power voltage as shown on the  
type plate on the back of the set corresponds to The time is displayed using the 12-hour clock  
your local AC power supply.  
If it does not, consult your dealer or service  
organization.  
Clock display  
The clock radio has a built-in SLUMBER function.  
This function enables you to listen to the radio at  
bedtime without having to get up to switch the  
radio off. The radio will automatically switch off at  
the time set. The maximum slumber time is 59  
minutes.  
DISPLAY 1  
PM  
RIS K OF ELECTRIC S HOCK  
DO NOT OP EN  
system where the PM indicator lights up (on=PM,  
off=AM) in the top left corner of the display. The  
display also indicates whether you have switched  
on the alarm(s). These indicators will light up  
respectively next to ALARM 1 and ALARM 2 on  
CAUTION: TO REDUCE THE RIS K OF ELECTRIC S HOCK, DO NOT  
REM OVE COVER (OR BACK). NO US ER-S ERVICEABLE P ARTS  
INS IDE. REFER S ERVICING TO QUALIFIED S ERVICE P ERS ONNEL.  
Time 10;50 PM  
Alarm 1 activated  
AJ 3140 FM AM CLOCK RADIO  
AJ 3140 Dual Alarm Clock Radio  
The set complies with the FCC-Rules, Part  
15.  
0
9
!
@
2. Connect the power plug to the wall outlet.  
The power supply is now switched on and  
Lheure 10:50 PM  
Alarme 1 activée  
TThis bolt of lightning indicates uninsu  
Setting the slumber time  
lated  
the numbers on the display will start to flash. the display.  
You will need to set the correct time.  
3. To disconnect the set from the AC power  
completely, withdraw the power plug from the  
wall outlet.  
material within your unit may cause an electrical  
shock. For the safety of everyone in your  
household, please do not remove product  
covering.  
The length of time you listen to the radio before  
you fall asleep is called the slumber time.  
1. Set the RADIO switch to OFF.  
2. Set your slumber time by pressing the  
SLUMBER button.  
If you press the SLUMBER button once, 59  
will appear on the display, indicating that you  
have a slumber time of 59 minutes.  
If you keep the SLUMBER button pressed, the  
display will slowly begin to count down from  
59 to 00 minutes. Release the button as soon  
as the required slumber time is reached.  
8
ALARM 1  
1050  
ALARM 2  
ALARM 2  
ALARM 2  
La hora del reloj (AM)  
Despertador apagado  
1. Press and hold down the TIME button.  
2. Use the 4 and 7 buttons to set and adjust the  
hours and minutes.  
With 7 pressed: the time will increase  
rapidly from minutes to hours. Release 7  
when you have reached the correct setting.  
Pressing 4 will allow you to adjust the time  
backward minute by minute if necessary.  
7
6
Avoid exposing the clock radio to rain,  
dampness and extreme heat to prevent a safety  
hazard as well as damage to the unit.  
IO  
IOIOIO  
IOIO  
#
This exclamation point calls attention to features  
for which you should read the enclosed  
literature closely to prevent operating and  
maintenance problems.  
I
I
O
IO  
I
O
IO  
I
O
IO  
II  
I
IO  
I
O
I
IO  
S
O
IO  
I
R
R
A
A
L
L
A
A
T
T
A
A
E
E
P
P
E
E
R
R
M
M
z F  
Hz F  
M
H
M
M
zA  
HHzA  
k
8
1
1
M
8
0
0
0
1
k
1
3
3
0
0
0
0
6
6
4
1
1
4
IOI  
OIO  
O
IOIOI  
0
0
1
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
1
0
0
8
1
0
0
8
POWER FAILURE  
6
0
0
3
6
9
9
6
6
I
I
2
0
0
3
2
IO  
IOIO  
IO  
I
9
9
5
5
8
8
3
8
Hzz 8  
OIIOIO  
I
O
I
IO  
IOIOIO  
H
M
M M  
M
A
A
3
DISPLAY 2  
M
R
A
A
L
z
F
H
z
F
k
H
M k  
A
A
T
T
A
A
E
E
P
P
E
E
5
R
R
When a power failure occurs, the clock radio  
will be switched off.  
M
M
z F  
Hz F  
H
M
M
M
8
6
1
1
M
8
zA  
HHzA  
k
Clock time (AM)  
Alarm setting deactivated  
0
0
0
0
1
k
1
3
3
1
0
0
0
0
6
4
1
AJ 3140 FM AM CLOCK RADIO  
4
SAFETY INSTRUCTIONS Read before operating equipment  
0
0
1
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
AA  
LL  
AA  
RR  
MM  
0
1
IO  
1
8
0
0
AD  
R
6
0
0
3
6
9
K
9
1
1
C
6
LO  
2
2
When the power supply returns, the numbers on  
the display will start to flash and you will need  
to reset the correct time on the clock.  
To retain the clock time and the set alarm  
time(s) in the event of an AC power failure or  
disconnection, you can insert a 9 volt battery  
(not included), type 6F22, into the battery  
compartment.  
OOIIOOIIOO  
OOIIOOIIOO  
OOIOIO  
C
9
8
9
M
A
8
8
3
6
FM  
8
zz 8  
40  
1
J3  
H
H
M
0
0
PM  
3
3
5
5
I
M M  
OIO  
A
This product was designed and manufactured to meet strict quality and 11.Grounding or Polarization -  
safety standards. There are, however, some installation and operation  
precautions which you should be particularly aware of.  
M
z
F
F
H
z
k
H
RADIO  
M k  
M
A
2
L
A
A
Precautions that should be taken so  
that the grounding or polarization  
means of an appliance is not defeated.  
$
Lheure actuelle (AM)  
Alarme désactivée  
M
P
AC  
Cancelling the slumber time  
You can switch off the radio before the slumber  
time has elapsed.  
1. Press the SLUMBER OFF/REPEAT ALARM button  
to cancel the slumber function.  
You can use this clock solely as a radio  
1. Set the RADIO switch to ON.  
2. Select your wave band using the BAND switch.  
3. Locate the required radio station using the  
TUNING dial.  
Polarized Plug  
AA  
LL  
AA  
RR  
MM  
1. Read Instructions - All the safety and operating instructions  
should be read before the appliance is operated.  
2. Retain Instructions - The safety and operating instructions should  
be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should be  
followed.  
5. Water and Moisture - The appliance should not be used near  
water - for example, near a bathtub, washbowl, kitchen sink,  
laundry tub, in a wet basement or near a swimming pool, etc.  
6. Carts and Stands - The appliance should be used only with a cart  
or stand that is recommended by the manufacturer.  
1
AL  
CAUTION:To prevent  
1
1
OO  
IIO  
O
OO  
4
3
IIOO  
IIOO  
AALLAARRMM  
OOIO  
OOIIO  
IIOO  
electric shock, match the wide blade of this plug to the wide slot,  
thenfully insert. Do not use this (polarized) plug with an extension  
cord, receptacle or other outlet unless the blades can be fully  
inserted to prevent blade exposure.  
O
IIOO  
ALARM 1  
731  
11  
IOIO  
%
^
Clock time (AM)  
Ala rm setting deactivated  
OO IO  
FM AM CLOCK RADIO  
IIOOIIOO  
OOIIO  
OIO  
IO  
AJ3140  
A
2
L
A
L
A
R
M
1
O
IOI  
OIO  
12.Power-Cord Protection - Power supply cords should be routed so  
that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords and plugs,  
convenience receptacles, and the point where they exit from the  
appliance.  
13.Cleaning - The appliance should be cleaned only as recommended  
by the manufacturer.  
14.Power Lines - An outdoor antenna should be located away from  
power lines.  
15.Nonuse Periods - The power cord of the appliance should be  
unplugged from the outlet when left unused for a long period of  
time.  
16.Object and Liquid Entry - Care should be taken so that objects do  
not fall and liquids are not spilled into the enclosure through  
openings.  
17.Damage Requiring Service - The appliance should be serviced by  
qualified service personnel when:  
A. The power-supply cord or the plug has been damaged; or  
B. Objects have fallen, or liquid has spilled into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or exhibits a  
marked change in performance; or  
E. The appliance has been dropped, or the enclosure damaged.  
18.Servicing - The user should not attempt to service the appliance  
beyond that described in the operating instructions. All other  
servicing should be referred to qualified service personnel.  
I
O
O
IOIIO  
O
O
PM  
Should there be a power failure, the clock will  
continue to function. However, the time will not 5. To turn off the radio, set the RADIO switch to  
4. Set the volume by turning the VOLUME knob.  
Note:  
AAL  
L
AARM  
RM  
rm  
rm  
la  
a
a la  
AL 1  
11  
l
OO  
The slumber function does not affect the alarm  
setting(s).  
If you have an alarm set in the radio mode,  
make sure you have adjusted the volume loud  
enough to wake you up before you set the  
slumber time.  
u a l  
d u a  
d
II  
OO  
OO  
II  
II OO  
OO  
OO  
II  
II OO  
OO  
be illuminated on the clock display, as the use  
of the battery is strictly to retain both the set  
clock and alarm time(s) only, where actual  
operation of the alarm and radio is excluded.  
As soon as the power is switched on again,  
the display will indicate the correct time.  
1. Before inserting the battery, connect the  
power plug to the wall outlet.  
2. Place the battery in the battery compartment  
on the bottom of the clock radio.  
Replace the battery once a year, or as often  
as necessary.  
OFF.  
2
1
II  
OO  
DISPLAY 3  
Antenna:  
&
6A.  
An appliance and cart combination should be moved  
with care. Quick stops, excessive force, and uneven  
surfaces may cause the appliance and cart  
combination to overturn.  
A
Slumber time  
Alarm 1 and 2 both active  
L
A
For FM reception, use the external pigtail  
antenna. Adjust the pigtail antenna slightly to  
obtain optimum reception.  
For AM reception, the set is provided with an  
internal antenna. By adjusting the position of  
your clock radio, optimum reception can be  
obtained. Place the set on a non-metallic  
surface to avoid any deterioration of AM  
reception.  
R
M
O
IO  
AJ 3140 FM AM CLOCK RADIO  
1
1
OI  
IOIO  
O O  
IOIO  
O
IO  
O
Owners Manual  
Mode dem ploi  
Instructivo de m anejo  
PM  
7. Wall or Ceiling Mounting - The appliance should be mounted to  
a wall or ceiling only as recommended by the manufacturer.  
8. Ventilation - The appliance should be situated so that its location  
or position does not interfere with its proper ventilation. For  
example, the appliance should not be situated on a bed, sofa, rug,  
or similar surface that may block the ventilation openings; or, placed  
in a built-in installation, such as a bookcase or cabinet that may  
impede the flow of air through the ventilation openings.  
9. Heat - The appliance should be situated away from heat sources  
such as radiators, heat registers, stoves, or other appliances  
(including amplifiers) that produce heat.  
La durée SLUMBER  
Alarme 1 et 2 activées  
a la rm  
a la rm  
l
d u a l  
d u a  
ALARM 1  
009  
El tiempo de dormitado  
Despertador 1 y 2 activados  
10.Power Sources - The appliance should be connected to a power  
supply only of the type described in the operating instructions or as  
marked on the appliance.  
91/8  
EL 4562-1  
The model and production number are located on  
the rear of the set.  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
LIMITED WARRANTY  
Alarm  
Troubleshooting  
AJ 3140 Dual Alarm Clock Radio  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to solve a problem by following these hints, consult your dealer or service center.  
SETTING THE ALARM  
MAGNAVOX PORTABLE AUDIO  
90 Days Free Exchange  
1 RADIO  
to switch radio mode ON/OFF  
mise en/hors circuit (ON/OFF) de la radio  
para encender/apagar (ON/OFF) la radio  
This product m ust be carried in for an exchange  
You may set two different alarm times with this  
clock radio. This can be useful when, for example,  
you need to wake at a different time during the  
week and at the weekend.  
Wake by buzzer:  
1. Set the ALARM 1 mode or ALARM 2 mode  
selector to BUZ(zer).  
The respective ALARM indicator lights up on  
the display.  
At the set alarm time, the buzzer will switch on  
and it will automatically switch off 59 minutes  
later.  
2 ALARM 2 mode selector  
sélecteur de mode ALARM 2  
réveil par la sonnerie à l’heure de réveil 2  
réveil par la radio à l’heure de réveil 2  
arrêt de l’alarme 2  
selector de modo ALARM 2  
WARNING:  
WHO IS COVERED?  
EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO OR U.S.  
BUZ(zer)  
RAD(io)  
OFF  
to activate buzzer for Alarm 2 setting  
to activate radio for Alarm 2 setting  
to switch off Alarm 2  
para despertarse con el zumbador a la 2ª hora de despertarse  
para despertarse con la radio a la 2ª hora de despertarse  
para apagar el despertador 2  
Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.  
VIRGIN ISLANDS  
Contact your dealer to arrange an exchange. Or, ship the product,  
You must have proof of purchase to exchange the product. A  
sales receipt or other document showing that you purchased the  
product is considered proof of purchase. Attach it to this owner’s insured and freight prepaid, and with proof of purchase enclosed,  
manual and keep both nearby.  
to the address listed below.  
Problem  
No sound.  
Possible Cause  
Remedy  
3 ALARM 1 mode selector  
sélecteur de mode ALARM 1  
réveil par la sonnerie à l’heure de réveil 1  
réveil par la radio à l’heure de réveil 1  
arrêt de l’alarme 1  
selector de modo ALARM 1  
Setting alarm time 1 and 2  
1. Press and hold down the ALARM 1 or ALARM 2  
button to set the alarm time.  
2. Use the 4 and 7 buttons to set and adjust the  
hours and minutes.  
With 7 pressed; the time will increase  
rapidly from minutes to hours. Release 7  
when you have reached the correct setting.  
Pressing 4 will allow you to adjust the time  
backward minute by minute.  
3. Release the ALARM 1 or ALARM 2 button and  
the 7 or 4 buttons when you have reached the  
correct setting.  
Small Product Service Center  
WHAT IS COVERED?  
Philips Service Company  
907 Snapps Ferry Road, Plant 2, Building 6  
Greeneville, TN 37743  
BUZ(zer)  
RAD(io)  
OFF  
to activate buzzer for Alarm 1 setting  
to activate radio for Alarm 1 setting  
to switch off Alarm 1  
para despertarse con el zumbador a la 1ª hora de despertarse  
para despertarse con la radio a la 1ª hora de despertarse  
para apagar el despertador 1  
Warranty coverage begins the day you buy your product. For 90  
days thereafter, a defective or inoperative product will be  
replaced with a new, renewed or comparable product at no charge  
to you. A replacement product is covered only for the original  
warranty period. When the warranty on the original product expi-  
res, the warranty on the replacement product also expires.  
Volume not adjusted.  
Adjust the VOLUME.  
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied  
warranties, including implied warranties of merchantability and  
fitness for a particular purpose, are limited in duration to the  
duration of this express warranty. But, because some states do  
not allow limitations on how long an implied warranty may last,  
this limitation may not apply to you.)  
Power cord not securely  
connected.  
Connect the power cord  
properly.  
4 Speaker  
5 SLUMBER  
6 7 fast up:  
Haut-parleur  
Altavoz  
ALARM OFF  
to set/activate slumber time  
réglage/activation du mode SLUMBER  
para ajustar/activar el tiempo de dormitado  
WHAT IS EXCLUDED?  
AM broadcast cannot be  
received.  
Set is too close to electrical  
equipment e.g. TVs, computer,  
fluorescent lamps.  
Move the clock radio away  
from electrical equipment.  
Your warranty does not cover:  
to adjust the hours and minutes for TIME and ALARM TIME  
réglage des heures et des minutes pour l’heure  
(TIME) et l’alarme (ALARM TIME)  
para ajustar las horas y los minutos para el reloj  
(TIME) y el despertador (ALARM TIME)  
There are three ways to switch off the alarm.  
• labor charges for installation or setup of the product,  
adjustment of customer controls on the product, and installation  
or repair of antenna systems outside of the product.  
• product repair and/or part replacement because of misuse,  
accident, unauthorized repair or other cause not within the  
control of Philips Consumer Electronics Company.  
EXCHANGING A PRODUCT IN CANADA  
Contact your dealer to arrange an exchange. Or, ship the product,  
insured and freight prepaid, and with proof of purchase enclosed,  
to one of the Philips consumer service centers listed below.  
Switching off the alarm for 24 hours  
1. Press the RESET button.  
The alarm is now switched off for 24 hours  
and will sound again the next day at the  
same time.  
7 4 slow down  
to adjust the hours and minutes for TIME and ALARM TIME  
réglage des heures et des minutes pour l’heure (TIME) et para ajustar las horas y los minutos para el reloj  
l’alarme (ALARM TIME)  
Intermittent crackling sound  
during FM reception.  
Weak signal.  
Adjust the pigtail antenna.  
(TIME) y el despertador (ALARM TIME)  
para ajustar/verificar la 1ª hora de despertarse (ALARM 1)  
para ajustar/verificar la 2ª hora de despertarse (ALARM 2)  
para ajustar el reloj  
Philips Electronics Ltd.  
601 Milner Avenue, Scarborough,  
Ontario, M1B 1M8 - 3 (416) 292-5161  
• reception problems caused by signal conditions or cable or  
antenna systems outside the unit.  
8 ALARM 1  
9 ALARM 2  
0 TIME  
to adjust/review ALARM 1  
to adjust/review ALARM 2  
to adjust clock time  
réglage/vérification de l’alarme 1 (ALARM 1)  
réglage/vérification de l’alarme 2 (ALARM 2)  
réglage de l’heure  
• a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair  
of products damaged by these modifications.  
• incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or  
consequential damages, so the above exclusion may not apply  
to you. This includes, but is not limited to, prerecorded material,  
whether copyrighted or not copyrighted.)  
4977 Levy Street, St. Laurent, (Montréal),  
Québec, H4R 2N9 - 3 (514) 956-0120  
1741 Boundary Road, Vancouver,  
B.C., V5M 3Y7 - 3 (604) 294-3441  
The alarm does not function.  
The alarm is not set.  
Set the alarm time and set the  
alarm switch to BUZ or RAD.  
The clock display goes back to clock time.  
To review your set alarm time, press the  
appropriate ALARM 1 or ALARM 2 button.  
Switching off the alarm temporarily  
For both alarm modes (radio or buzzer) this will  
repeat your alarm at seven minute intervals.  
1. Press the SLUMBER OFF/REPEAT ALARM  
button.  
The alarm will temporarily switch off.  
Seven minutes later, the alarm (radio or  
buzzer) will sound again.  
2. Press the SLUMBER OFF/REPEAT ALARM button  
again if you wish to repeat the alarm call.  
If the SLUMBER OFF/REPEAT ALARM button  
is not pressed again, the alarm will  
automatically switch off 59 minutes later.  
Your alarm time setting will then  
Volume is too low for radio.  
Increase the volume.  
(In Canada, this warranty is given in lieu of all other warranties.  
No other warranties are expressed or implied, including any  
implied warranties of merchantability or fitness for a particular  
purpose. Philips is not liable under any circumstances for any  
direct, indirect, special, incidental or consequential damages,  
howsoever incurred, even if notified of the possibility of such  
damages.)  
! RESET  
to stop the active alarm for 24 hours  
to switch off the alarm for 7 minutes  
arrêt de l’alarme pour 24 heures  
arrêt de l’alarme pour 7 minutes  
Cadran  
para apagar el despertador por 24 horas  
para apagar el despertador por 7 minutos  
Cuadrante  
@ SLUMBER OFF/REPEAT ALARM  
# Dial scale  
ALARM ON  
• a product used for commercial or institutional purposes.  
The clock radio can wake you in two ways:  
WHERE IS EXCHANGE AVAILABLE?  
$ VOLUME  
to adjust the sound level  
réglage du volume  
para ajustar el volumen  
You may exchange the product in all countries where the product  
is officially distributed by Philips Consumer Electronics Company.  
In countries where Philips Consumer Electronics Company does  
not distribute the product, the local Philips service organization  
will attempt to provide a replacement product (although there may  
be a delay if the appropriate product is not readily available).  
TO GET OUT-OF-WARRANTY EXCHANGE  
Wake by radio:  
1. Tune to the desired radio station using the  
TUNING knob.  
Make sure you have adjusted the volume loud  
enough to wake you up.  
2. Set the ALARM 1 mode or ALARM 2 mode  
selector to RAD(io).  
% Display  
Afficheur  
Presentación  
In U.S.A., Puerto Rico or U.S. Virgin Islands, contact Philips  
Service Company at 3 (800) 851-8885 to obtain the cost of out-  
of-warranty exchange. Then carefully pack the product and ship it  
to the Small Product Service Center (address listed above).  
In Canada, contact the nearest Philips consumer service center  
(phone number and address listed above) to obtain the cost of out-  
of-warranty exchange. Then carefully pack the product and ship it  
to that service center.  
^ BAND  
to select FM-AM waveband  
to tune to radio stations  
choix de la bande d’ondes FM-AM  
accord sur l’émetteur  
para seleccionar la banda de ondas FM-AM  
para sintonizar la emisora de radio deseada  
& TUNING  
BEFORE REQUESTING EXCHANGE...  
Please check your owner’s manual before requesting an exchange.  
Adjustments of the controls discussed there may save you a trip.  
REMEMBER  
The respective ALARM indicator lights up on  
the display.  
At the set alarm time, the radio will switch on and  
it will automatically switch off 59 minutes later.  
automatically enter the RESET mode and will  
sound at the same time the next day.  
Please record the model and serial numbers found on the product  
below. Also, please fill out and mail your warranty registration  
card promptly. It will be easier for us to notify you if it is  
necessary.  
Switching off the alarm completely  
1. Push the ALARM 1 mode or ALARM 2 mode  
selector to the OFF position, before or during  
the set alarm time.  
Model #  
Serial #  
Environmental information  
All unnecessary packaging material has been omitted. We have tried to make the packaging easy ta  
separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene  
(bags).  
This warranty gives you specific legal rights.  
You may have other rights which vary from state to state.  
The alarm indicator will disappear from the  
display.  
Philips Service Com pany  
P.O Box 555  
J efferson City, Tennessee 37760  
3 (423) 475-8869  
PHILIPS CONSUMER ELECTRONICS COMPANY  
Your set consists of materials which can be recycled if disassembled by a specialized company. Please  
observe the local regulations regarding the disposal of packing materials, dead batteries and old  
equipment.  
A Division of Philips Electronics North America Corporation  
Knoxville, Tennessee 37914-1810, U.S.A.  
EL4966E001 / MAC 4107 / 12-94  
IB7573Too1  
Printed in Hong Kong  
TC Text/CvB/9607/1  

Nokia 2855i User Manual
Maxtor OneTouch III C01W010 User Manual
Lindy 42791 User Manual
Fujitsu Computer Drive 163 0731 User Manual
Epson ENDEAVOR 486I User Manual
Echo Bear Cat CH6614 71620 User Manual
Dell POWEREDGE 2950 User Manual
Cub Cadet CSV24 User Manual
Cecilware Java Jr User Manual
Black & Decker DCM900 Sries User Manual