Motorola H375 User Manual

BEFOREYOU BEGIN  
Before using this product, read the Important Safety and Legal  
Information pamphlet and follow its instructions.  
Take a moment before you get started to  
familiarize yourself with your new  
H375 Headset.  
Earhook  
motorola  
H375  
Speaker  
Power Button  
Microphone  
Volume  
Button  
Call Button  
s
Indicator  
Light  
Quick Start Guide  
START BLUETOOTH  
FEATURE  
CHARGE  
1
2
Your Headset's Battery  
Your Phone  
Charging  
®
Port  
Your phone's Bluetooth feature is off by  
default.To use your headset, you must turn on  
the Bluetooth feature in your phone.  
For most Motorola phones (at the main menu):  
Plug the Motorola charger into the end of  
the headset.  
1
M
Press  
(Menu) > Settings > Connection >  
1
Bluetooth Link > Setup.  
Scroll to Power.  
Select Change.  
Scroll to On.  
The indicator light turns on when the  
battery is charging. It may take up to 30  
seconds for the light to turn on. When the  
headset's battery is fully charged (about 3  
hours), the indicator light is steadily lit in  
blue.  
2
3
4
5
Unplug the charger from the headset.  
2
Press Select to turn on the Bluetooth  
feature.The Bluetooth feature remains on  
until you turn the feature off.  
Note: Headset is not functional while charging.  
Note: These steps are for most Motorola phones.  
For other phones, see your phone's user's guide.  
TROUBLESHOOTING  
USING YOUR H375  
My headset will not enter pairing mode.  
Make sure that any devices previously paired  
with the headset are turned off. If the indicator  
light is not steadily lit in blue, first turn off the  
other device, then turn your headset off and on.  
The indicator light becomes steadily lit in blue  
indicating the headset is now in pairing mode.  
See  
Features and  
Functions Guide  
on the reverse side  
for information on  
using your H375  
My phone doesn't find my headset.  
Make sure the indicator light on your headset is  
on (lit in blue) and steady when your phone is  
searching for devices (see step 3).  
My headset worked before but now it's not  
working.  
Make sure your phone is on and the Bluetooth  
feature is turned on in your phone (see step 2).  
If the Bluetooth feature was turned off or was  
turned on only temporarily, you may need to  
restart the Bluetooth feature (see step 2) and  
pair your phone and headset again (see step 3).  
Support.  
If you need more help, contact us at  
1-877-MOTOBLU or visit us at  
TURNING HEADSET  
ON AND OFF  
Features and  
Functions Guide  
To turn your headset on, press and hold  
the Power button until the indicator light  
flashes.  
To turn your headset off, press and hold  
the Power button until the indicator light  
flashes rapidly and then turns off.  
Power Button  
Indicator  
Light  
IMPORTANT:  
Be sure to first follow the  
Quick Start Guide  
on the reverse side  
of this guide  
to complete initial setup  
of your H375.  
WEARINGTHE HEADSET  
CHANGING FOR USE  
ON OTHER EAR  
You can wear your H375 headset on your left or  
right ear.The headset comes ready for the right  
ear.To change the headset for the left ear:  
Your H375 headset is supplied with both round-  
and oval-shaped earbuds to provide personal  
choice for maximum comfort.The earbud is fitted  
onto the end of your headsets earpiece speaker,  
and placed onto your ear when using your  
headset as shown.  
Firmly lift and pull the  
top of the earhook up  
and off speaker stem  
as shown.  
1
Flip the headset over.  
2
3
To wear your headset, flex the earhook and  
loop it over your ear as shown.  
Firmly attach the  
earhook to the speaker  
stem as shown.  
CHANGINGVOLUME  
European Union Directives Conformance  
Statement  
BUTTON ORIENTATION  
Hereby, Motorola declares that  
this product is in compliance with:  
You can also change the orientation of the  
volume buttons on your headset.  
• The essential requirements and  
other relevant provisions of Directive  
1999/5/EC.  
Turn the headset power off.  
1
2
• All other relevant EU Directives.  
Press and hold the Volume button you  
want to assign as the "volume up" button  
and the Power button to power on the  
headset. The indicator light flashes three  
times in blue.  
Product  
Approval  
Number  
Power Button  
The above gives an example of a typical Product  
Approval Number.  
You can view your products Declaration of Conformity  
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at  
www.motorola.com/rtte. To find your DoC, enter the  
product Approval Number from your products label in  
the “Search” bar on the web site.  
Volume Buttons  
MAKING CALLS  
CHECKING BATTERY LEVEL  
To check battery level while headset is powered on,  
press and hold both volume buttons for 5 seconds  
until you hear a beep.The indicator light displays the  
following charge status for a few seconds.  
Function  
Action  
Make a voice dial call  
Tap the Call button  
and speak the  
name after the tone  
Indicator Light  
Charge Level  
End a call  
Tap the Call button  
Tap the Call button  
Red  
Battery at less than  
10% charge  
Answer a call  
Ignore a call  
Purple  
Blue  
Battery at between  
Press and hold either  
Volume button until  
incoming call stops  
ringing  
10% and 80% charge  
Battery at more than  
80% charge  
Redial last call  
Press and hold the  
Call button for at least  
2 seconds until you  
hear a beep  
CHARGING STATUS  
With the Charger Plugged In  
Indicator Light  
Charge Status  
Mute or unmute a call  
Tap both Volume  
buttons  
Red  
Charging (battery  
level less than 10%  
charge)  
Note: Some features are phone/network dependent.  
Purple  
Blue  
Charging (battery  
level more than 10%  
charge)  
Note:Your H375 supports both Handsfree and Headset  
Profiles. Accessing call functions depends upon which profile  
your phone supports. See your phone's user's guide for more  
information.  
Charging complete  
OPERATING STATUS  
AUDIOTONES  
With No Charger Plugged In  
AudioTone  
Headset Status  
Powering on  
Indicator Light  
Off  
Headset Status  
Power off  
Ascending tone  
Descending tone  
Powering off  
Three blue flashes  
Steady blue  
Powering on/off  
Pairing mode  
Two ascending  
tones  
Pairing successful  
Ring tone  
Incoming call  
Rapid blue/purple flashes Pairing/connect  
successful  
Two short tones when  
pressing Volume button  
Volume at minimum  
or maximum  
Quick blue flash  
Slow blue flash  
Incoming/outgoing call  
High/low tones  
repeated every 60 sec.  
Low battery  
Out of range  
Connected call  
Connected (on a call)/  
Standby (not on a call)  
No audio indications;  
deteriorating quality  
Slow red flash  
Idle (not connected  
to phone)  
Three ascending tones  
Slow purple flash  
Quick red flash  
Connected call muted  
Low battery  
Three descending tones Ended call  
Two rapid ascending  
tones  
Mute enabled  
Note: After 30 minutes on a call or of inactivity, the light stops  
flashing to conserve power, but the headset remains on.  
Two rapid descending  
tones  
Mute disabled  

Motorola RAZRV3PNKATTREF User Manual
Krups Coffeemaker 466 User Manual
JVC KD ADV7490 User Manual
Iluv Cell Phone Accessories IMM153 User Manual
Hamilton Beach Coffeemaker 48465C User Manual
Grizzly BASS COMBO H5524 User Manual
Ericsson A1228LX User Manual
Elektra Beckum Computer Accessories MCE User Manual
Black & Decker DDCM200 User Manual
Audiovox CDC 10R User Manual