Nokia 6220 classic User Guide
9206957
Issue
3
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.
NO WARRANTY
The third-party applications provided with your device may have been created and may be
owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the
copyrights or intellectual property rights to the third-party applications. As such, Nokia does
not take any responsibility for end-user support, functionality of the applications, or the
information in the applications or these materials. Nokia does not provide any warranty for
the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED
AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR
ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-
PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
9206957 Issue
3
Contents
SAFETY.............................................. 6
Help ...................................................................... 8
Nokia support and contact
information......................................................... 8
Insert a (U)SIM card and battery ................. 9
Memory card...................................................... 9
Charge the battery........................................ 10
Cell broadcast ................................................. 37
Standby mode................................................. 13
Indicators......................................................... 14
Volume control............................................... 16
My own key..................................................... 16
Keypad lock (keyguard)................................ 16
Access codes ................................................... 16
Remote lock..................................................... 17
Download!........................................................ 17
My own............................................................. 18
Connect a compatible headset.................. 18
Connect a USB data cable .......................... 18
7. Contacts ..................................... 38
Save and manage contact
information...................................................... 38
Contact groups ............................................... 39
Add a ringing tone......................................... 39
8. Gallery ........................................ 39
Main view......................................................... 39
Download files ................................................ 40
Edit images ...................................................... 40
Edit video clips................................................ 40
Watch images and video clips on TV........ 40
Print images..................................................... 41
Print online ...................................................... 41
Share online..................................................... 42
3. Call functions............................. 18
Make a voice call........................................... 19
Answer or reject a call ................................. 20
Video calls........................................................ 21
Call settings..................................................... 22
Video sharing.................................................. 23
Log ..................................................................... 25
9. Camera........................................ 43
Capture images............................................... 43
Record videos.................................................. 46
Camera settings.............................................. 47
4. Positioning.................................. 25
About GPS........................................................ 25
Assisted GPS.................................................... 25
4
Music player.................................................... 48 Install or remove applications.................... 65
Nokia Podcasting........................................... 51 File manager.................................................... 66
FM Radio.......................................................... 53 Licences............................................................. 67
RealPlayer........................................................ 54 Device manager.............................................. 68
11. Internet .................................... 55 Data transfer ................................................... 69
Browse the web.............................................. 55 PC Suite............................................................. 69
Search............................................................... 57 Bluetooth connectivity................................. 69
12. Personalisation ........................ 58
Remote synchronisation............................... 72
Themes.............................................................. 58
Push to talk...................................................... 72
Profiles.............................................................. 58
Connection manager..................................... 73
13. Time management................... 58
18. Enhancements......................... 74
Clock.................................................................. 58
Calendar........................................................... 59
19. Battery and charger
information.................................... 74
14. Office applications.................. 59
Active notes..................................................... 59
Notes................................................................. 59
Calculator......................................................... 60
Converter.......................................................... 60
Mobile dictionary........................................... 60
Adobe Reader.................................................. 61
Quickoffice ...................................................... 61
Nokia battery authentication
guidelines ......................................................... 75
Care and maintenance................... 76
Additional safety information...... 77
Index............................................... 81
15. Settings.................................... 62
Voice commands............................................ 62
Phone settings................................................ 62
Speech............................................................... 64
5
SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when it
may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
■ About your device
The wireless device described in this guide is approved for use on the GSM 850, 900, 1800,
and 1900 and UMTS 900 and 2100 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect local customs, privacy and
legitimate rights of others, including copyrights.
Copyright protection may prevent some images, music, and other content from being
copied, modified, or transferred.
Your device supports several methods of connectivity. Like computers, your device may be
exposed to viruses and other harmful content. Exercise caution with messages, connectivity
requests, browsing, and downloads. Only install and use services and other software from
trustworthy sources that offer adequate security and protection against harmful software,
such as applications that are Symbian Signed or have passed the Java Verified™ testing.
S A F E T Y
6
Consider installing antivirus and other security software on your device and any connected
computer.
Your device may have preinstalled bookmarks and links for third-party internet sites. You
may also access other third-party sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose
to access such sites, you should take precautions for security or content.
Warning: To use any features in this device, other than the alarm clock, the device
must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.
The office applications support common features of Microsoft Word, PowerPoint, and Excel
(Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.
Remember to make back-up copies or keep a written record of all important information
stored in your device.
During extended operation, such as an active video call and high speed data connection,
the device may feel warm. In most cases, this condition is normal. If you suspect the device
is not working properly, take it to the nearest authorised service facility.
When connecting to any other device, read its user guide for detailed safety instructions.
Do not connect incompatible products.
■ Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all networks;
other networks may require that you make specific arrangements with your service provider
before you can use the network services. Your service provider can give you instructions and
explain what charges will apply. Some networks may have limitations that affect how you
can use network services. For instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain features be disabled or not activated
in your device. If so, these features will not appear on your device menu. Your device may
also have a special configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as web browsing, e-mail, push to talk, and multimedia
messaging, require network support for these technologies.
■ Battery removing
Always switch the device off and disconnect the charger before removing the battery.
S A F E T Y
7
Support
■ Help
Your device has context-sensitive help. To access help when an application is
open, select Options > Help. To switch between help and the application that
is open in the background, select and hold , and select from the list of open
applications.
To open help from the main menu, select > Help > Help. Select an application
to view a list of help topics, and select the related help text. To open a keyword
list, select Options > Search.
■ Nokia support and contact information
additional information, downloads, and services related to your Nokia product.
On the website, you can get information on the use of Nokia products
and services. If you need to contact customer service, check the list of
For maintenance services, check your nearest Nokia care point at
Software updates
Nokia may produce software updates that may offer new features, enhanced functions,
or improved performance. You may be able to request these updates through the
Nokia Software Updater PC application. To update the device software, you need the
Nokia Software Updater application and a compatible PC with Microsoft Windows 2000,
XP or Vista operating system, broadband internet access, and a compatible data cable to
connect your device to the PC.
To get more information and to download the Nokia Software Updater application, visit
If software updates over the air are supported by your network, you may also be able to
request updates through the device. See ‘Update software,’ page 68.
Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information
about data transmission charges.
Make sure that the device battery has enough power, or connect the charger before starting
the update.
S u p p o r t
8
1. Get started
■ Insert a (U)SIM card and battery
This device uses BP-5M batteries.
1. To open the back cover of the device, with the back of the device facing you
slide the cover toward the bottom of the device (1), and remove it (2). To
remove the battery, lift it from the end (3).
2. Slide the (U)SIM card in the SIM card holder (4).
Make sure that the gold-coloured contact area on the card is facing downward
on the device, and the bevelled corner faces toward the card holder slot.
3. Replace the battery (5). Replace the back cover (6).
■ Memory card
Use only compatible microSD and microSDHC cards approved by Nokia for use
with this device. Nokia uses approved industry standards for memory cards, but
some brands may not be fully compatible with this device. Incompatible cards
may damage the card and the device and corrupt data stored on the card.
Insert a memory card
Note that the memory card may be supplied
with the device, and may already be inserted.
1. Open the memory card slot door (1).
2. Place the memory card in the slot with
gold-coloured area facing down (2).
3. Push the card gently to lock it into place.
Close tight the slot door (3).
G e t s t a r t e d
9
Remove a memory card
Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may
damage the memory card as well as the device, and data stored on the card may
be corrupted.
1. Press briefly the power key.
2. Scroll to Remove memory card, and select OK > Yes.
3. Open the memory card slot door.
4. Push the card gently to release it.
5. Pull the card out, and select OK.
6. Close the slot door.
■ Charge the battery
1. Connect the charger to the wall socket.
2. Connect the charger plug to the charger
connector in the device.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.
The charging time depends on the charger and
the battery used.
■ Switch the device on and off
Press and hold the power key.
If the device asks for a PIN code, enter the PIN code, and select OK.
If the device asks for the lock code, enter the lock code, and select
OK. The factory setting for the lock code is 12345.
For more information about access codes, see ‘Access codes,’ p. 16.
To set the correct time zone, time, and date, select the country you
are presently in, then enter the local time and date. See also ‘Clock,’
p. 58.
G e t s t a r t e d
10
My Nokia
My Nokia is a free service that sends you tips, tricks, and support for your Nokia
device regularly as text messages. If My Nokia is available in your country and
supported by your service provider, your device invites you to join the My Nokia
service after you have set the time and the date.
Select the language for the service. If you change the language, the device
restarts. To sign-up to My Nokia, select Accept and follow the instructions on
the display.
To sign-up to My Nokia later, select > Applications > My Nokia.
After the invitation to join My Nokia, the Welcome application starts. With the
Welcome application, you can access the following applications:
Sett. wizard — Configure connection settings. See ‘Settings wizard,’ p. 12.
Switch — Copy or synchronise data from other compatible devices.
Tutorial — Learn about the features of your device and how to use them. To start
the tutorial later, select > Help > Tutorial and a tutorial item.
To open Welcome later, select > Help > Welcome.
Antenna locations
Cellular antenna (1)
GPS antenna (2)
Bluetooth antenna (3)
Your device may have internal and external antennas. As
with any radio transmitting device, avoid touching the
antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an antenna
affects the communication quality and may cause the
device to operate at a higher power level than otherwise
needed and may reduce the battery life.
■ Configuration settings
Before you can use multimedia messaging, push to talk, e-mail, synchronisation,
streaming, and the browser, you must have the proper configuration settings on
your device. Your device may automatically configure browser, multimedia
messaging, access point, and streaming settings based on the SIM card used. If
not, you can use the setting wizard application to configure the settings. You may
receive the settings directly as a configuration message, which you can save to
G e t s t a r t e d
11
your device. For more information on availability, contact your service provider or
nearest authorised Nokia dealer.
When you receive a configuration message, and the settings are not automatically
saved and activated, 1 new message is displayed. To save the settings, select
Show > Options > Save. You may need to enter a PIN code provided by the service
provider.
Settings wizard
The setting wizard application configures your device for operator and e-mail
settings based on your service provider. Configuring other settings may also be
possible.
To use these services, you may have to contact your service provider to activate a
data connection or other services.
Select > Settings > Sett. wizard.
■ Transfer data
To transfer information, such as contacts, from your old device, see ‘Data transfer,’
p. 69.
2. Your device
■ Keys and parts
Earpiece (1)
Secondary camera lens (2)
Light sensor (3)
Display (4)
Left and right selection keys (5)
Menu key (6), hereafter described as “select
”
Clear key (7)
Call key (8)
End key (9)
Number keys (10)
Navi™ scroll key, hereafter referred to as scroll
key, and status light around it (11)
Y o u r d e v i c e
12
GPS light (12)
My own key (13)
microSD card slot (14)
Microphone (15)
Micro USB connector (16)
Charger connector (17)
Nokia AV Connector (2.5 mm) (18)
Loudspeaker (19)
Camera flash (20)
Main camera lens (21)
Camera lens cover opening slide (22)
Power key (23)
Volume key (24)
Camera key (25)
■ Standby mode
When you have switched on the device, and it is registered to a network, the
device is in the standby mode and ready for use.
To open a list of most recently dialled numbers, press the call key.
To use the voice commands or voice dialling, press and hold the right
selection key.
To change the profile, press the power key, and select a profile.
To start a connection to the web, press and hold 0.
To select the view for the standby mode, select > Settings > Phone sett. >
General > Personalisation > Standby mode > Standby theme.
Depending on the selected standby theme, you can select applications or events
to add to a shortcut list in the standby mode or the scroll keys. To select the
applications or events, select > Settings > Phone sett. > General >
Personalisation > Standby mode > Shortcuts.
Y o u r d e v i c e
13
Offline profile
To quickly activate the offline profile, press briefly the power key, and select
Offline. To leave the offline profile, press briefly the power key, and select
another profile.
When the offline profile is active, all the connections to a cellular network are
turned off. However, you can use your device without a SIM card, and listen to the
radio or music using the music player. Remember to switch off your device when
wireless phone use is prohibited.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been
locked, enter the lock code.
■ Indicators
Icons
or — The device is connected to a UMTS or GSM network.
— HSDPA (network service) in the UMTS network is activated.
— The device is in the offline mode and not connected to a cellular network.
— A memory card is inserted in the device.
— You have unread messages in the inbox in Messaging.
— You received new e-mail in your remote mailbox.
— You have messages waiting to be sent in outbox.
— You have missed calls.
— Ringing type is set to Silent and Message alert tone and E-mail alert tone are
set to Off.
— The device keypad is locked.
— The loudspeaker is activated.
— An alarm is active.
— All calls to the device are diverted to another number.
or
— A headset or a loopset is connected to the device.
or or — A GPRS packet data connection is active, the connection is on
hold, or a connection is available.
Y o u r d e v i c e
14
or or — A packet data connection is active in a part of the network that
supports EGPRS; the connection is on hold; a connection is available. Your device
may not use EGPRS in the data transfer.
or or — A UMTS packet data connection is active; the connection is on
hold; a connection is available.
or
— Bluetooth connectivity is switched on; data is being transmitted
using Bluetooth technology.
— A USB connection is active.
Other indicators may also be shown.
GPS light
The GPS light blinks when your device is trying to establish a GPS connection, and
remains on when the GPS connection is established.
Status light
You can set the light around the scroll key to blink slowly to indicate when
the device is switched on. The light turns on for a few second at intervals of
approximately 20 seconds. To indicate missed events, the light blinks faster for
an hour after the missed event.
To activate the status light, select > Settings > Phone sett. > General >
Personalisation > Standby mode > Status light > On.
■ Screen saver
To set the screen saver settings, select > Settings > Phone sett. > General >
Personalisation > Display > Screen saver. To set the timeout period after which
the screen saver is activated, select Screen saver time-out. To set for how long the
screen saver is active, select Screen saver duration.
■ Menu
In the menu you can access the functions in your device. To access the main menu,
select
.
To open an application or a folder, scroll to it, and press the scroll key.
If you change the order of the functions in the menu, the order may differ from
the default order described in this user guide.
To mark or unmark an item in applications, press #. To mark or unmark several
consecutive items, press and hold #, and scroll up or down.
Y o u r d e v i c e
15
To change the menu view, select Options > Change Menu view and a view type.
To close an application or a folder, select Back and Exit as many times as needed
to return to the standby mode, or select Options > Exit.
To display and switch between open applications, press and hold . Scroll to an
application, and select it.
Leaving applications running in the background increases the demand on battery power and
reduces the battery life.
■ Volume control
To adjust the earpiece or loudspeaker volume during a call or when listening to an
audio file, press the volume keys. To activate or deactivate the loudspeaker during
a call, select Loudsp. or Handset.
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
■ My own key
By default, the Maps application opens when you press the my own key. To set
another application to open, select > Settings > Phone sett. > General >
My own key > My own key and an application.
■ Keypad lock (keyguard)
To lock the keypad in the standby mode, press the left selection key and * within
1.5 seconds. To set the device to automatically lock the keypad after a certain
time, select > Settings > Phone sett. > General > Security > Phone and SIM
card > Keypad autolock period > User defined and the desired time.
To unlock the keypad, select Unlock, and press * within 1.5 seconds.
When the device or keypad is locked, calls may be possible to the official emergency number
programmed into your device.
■ Access codes
To set how your device uses the access codes, select > Settings > Phone sett. >
General > Security > Phone and SIM card.
Lock code
The lock code (5 digits) helps to lock your device. The preset code is 12345. Change
the code, and set the device to request the code. If you forget the code and your
device is locked, your device will require service and additional charges may apply.
For more information, contact a Nokia Care point or your device dealer.
Y o u r d e v i c e
16
When the device or keypad is locked, calls may be possible to the official emergency number
programmed into your device.
PIN codes
The personal identification number (PIN) code or the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card.
The (U)PIN code is usually supplied with the SIM card. Set the device to request
the code each time the device is switched on.
The PIN2 code may be supplied with the SIM card and is required for some
functions.
The module PIN is required to access the information in the security module. The
signing PIN is required for the digital signature. The module PIN and the signing
PIN are supplied with the SIM card if the SIM card has a security module in it.
PUK codes
The personal unblocking key (PUK) code or the universal personal unblocking key
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code is required to change a blocked PIN2 code.
If needed, contact your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using call barring. You can obtain
the password from your service provider. If the password is blocked, contact your
service provider.
■ Remote lock
You can lock your device and memory card from another device using a text
message. To enable your device to be locked remotely, and to define the message
text to be used, select > Settings > Phone sett. > General > Security >
Phone and SIM card > Remote phone locking. The message can be from 5 to
20 characters long.
To lock your device, send the text message to your mobile phone number. To open
your device later, select Unlock, and enter the lock code.
■ Download!
Download! (network service) is a mobile content shop available on your device.
With Download! you can discover, preview, buy, download, and upgrade content,
services, and applications. The items are categorised under catalogs and folders
Y o u r d e v i c e
17
provided by different service providers. The available content depends on your
service provider.
Select > Applications > Download!.
Download! uses your network services to access the most up-to-date content.
For information on additional items available through Download!, contact your
service provider, or the supplier or manufacturer of the item.
■ My own
You can download applications to your device. To access the applications, select
> Applications > My own.
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the
Java VerifiedTM testing.
■ Connect a compatible headset
Do not connect products that create an output
signal as this may cause damage to the device.
Do not connect any voltage source to the
Nokia AV Connector.
When connecting any external device or any
headset, other than those approved by Nokia for use
with this device, to the Nokia AV Connector, pay
special attention to volume levels.
■ Connect a USB data cable
Connect a compatible USB data cable to the
USB connector.
To select the default USB connection mode or
change the active mode, select > Settings >
Connectivity > USB > USB connection mode and
the desired mode. To set whether the default mode
is activated automatically, select Ask on
connection > No.
3. Call functions
To adjust the volume during a call, press the volume keys.
C a l l f u n c t i o n s
18
■ Make a voice call
1. In the standby mode, enter the phone number, including the area code. Press
the clear key to remove a number.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), and enter the country code,
area code (omit the leading zero if necessary), and phone number.
2. To call the number, press the call key.
3. To end the call, or to cancel the call attempt, press the end key.
To make a call from Contacts, select > Contacts. Scroll to the desired name; or
enter the first letters of the name, and scroll to the desired name. To call the
number, press the call key.
To call a recently dialled number from the standby mode, press the call key.
Speed dialling
Speed dialling is a quick way to call frequently used numbers from the standby
mode. You need to assign a phone number to the speed dialling keys 3 to 9 (the 1
and 2 keys are reserved for the voice and video call mailboxes), and set Speed
dialling to On.
To assign a phone number to a speed dialling key, select > Settings > Speed
dial. Scroll to a key icon, and select Assign and the contact. To change the
number, select Options > Change.
To activate the speed dialling, select > Settings > Phone sett. > Phone > Call >
Speed dialling > On.
To call a speed dialling number, press and hold the speed dialling key until the
call begins.
Call mailbox
To call your call mailboxes (network service), from the standby mode, press and
hold 1 or 2. You can have call mailboxes for voice calls, video calls, and multiple
phone lines.
To define the call mailbox number if no number is set, select > Settings > Call
mailbox. Scroll to Voice mailbox (or Video mailbox), and enter the corresponding
mailbox number. To change the call mailbox number, select Options > Change
number. Contact your service provider for the call mailbox number.
C a l l f u n c t i o n s
19
Voice dialling
A voice tag is added automatically to all entries in Contacts. Use long names, and
avoid similar names for different numbers.
Make a voice dialling call
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
1. In the standby mode, press and hold the right selection key.
If you are using a compatible headset with the headset key, press and hold the
headset key.
2. When Speak now is displayed, speak the voice command clearly. The device
plays the voice command of the best match. After 1.5 seconds, the device dials
the number; if the result is not the correct one, before dialling select another
entry.
Make a conference call
Your device supports conference calls (network service) between a maximum of
six participants, including yourself.
1. Make a call to the first participant.
2. To make a call to another participant, select Options > New call.
3. To create the conference call when the new call is answered, select Options >
Conference.
To add another person to the conference call, repeat step 2, and select
Options > Conference > Add to conference.
4. To end the conference call, press the end key.
■ Answer or reject a call
To answer a call, press the call key.
To mute the ringing tone, select Silence.
To reject the call, press the end key, or select Options > Reject. If you have
activated Call divert > If busy, rejecting the call diverts the call.
To send a text message as a reply to the caller instead of answering the call, select
Options > Send message. To activate the text message reply and edit the message,
select > Settings > Phone sett. > Phone > Call > Reject call with message and
Message text.
C a l l f u n c t i o n s
20
Call waiting
During a call, to answer the waiting call, press the call key. The first call is put on
hold. To switch between the two calls, select Swap. To end the active call, press
the end key.
To activate the call waiting function (network service), select > Settings >
Phone sett. > Phone > Call > Call waiting > Activate.
■ Video calls
Make a video call
To make a video call, you may need to have a USIM card and be within the
coverage of a UMTS network. For availability of and subscription to video call
services, contact your service provider. A video call can only be made between two
parties and when no other voice, video, or data calls are active. The video call can
be made to a compatible mobile phone or an ISDN client.
You have captured a still image to be sent instead of video sending.
You have denied video sending from your device.
1. Enter the phone number in the standby mode and select Video call. Or, select
> Contacts, scroll to the desired contact, and select Options > Video call.
2. To change between showing video or only hearing sound during a video call,
select from the toolbar
(Enable video sending) or
(Disable video
sending).
If you have denied video sending during a video call, the call is still charged as
a video call. Check the pricing with your network operator or service provider.
3. To end the video call, press the end key.
Answer a video call
When a video call arrives,
is displayed.
To answer the video call, press the call key. Allow video image to be sent to caller?
is shown. If you select Yes, the image captured by the camera in your device is
shown to the caller. Otherwise, video sending is not activated.
If you have denied video sending during a video call, the call is still charged as a
video call. Check the pricing with your service provider.
To end the video call, press the end key.
C a l l f u n c t i o n s
21
■ Call settings
Call
Select > Settings > Phone sett. > Phone > Call and from the following:
Send my caller ID (network service) — to display or hide your phone number from
the person to whom you are calling
Call waiting (network service) — See ‘Call waiting,’ p. 21.
Reject call with message and Message text — See ‘Answer or reject a call,’ p. 20.
Own video in recvd. call — to set whether you allow to send your own video image
when you receive a video call
Image in video call — to select a still image to be shown when you deny a video
call
Automatic redial — to set your device to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt
Show call duration and Summary after call — to set the device to display the call
duration during a call and the approximate duration of the last call
Speed dialling — See ‘Speed dialling,’ p. 19.
Anykey answer — to answer an incoming call by briefly pressing any key,
except the left and right selection keys, volume keys, power key, end key, and
camera key.
Line in use (network service) — to select the phone lines for making calls and
sending short messages. This is shown only if the SIM card supports two
phone lines.
Line change (network service) — to enable or disable the line selection
Call divert
1. Select > Settings > Phone sett. > Phone > Call divert (network service).
2. Select which calls you want to divert, for example, Voice calls.
3. Select the desired option. For example, to divert voice calls when your number
is busy or when you reject an incoming call, select If busy.
4. Select Options > Activate and the phone number to which you want to divert
the calls. Several divert options can be active at the same time.
Call barring and call diverting cannot be active at the same time.
C a l l f u n c t i o n s
22
Call barring
1. Select > Settings > Phone sett. > Phone > Call barring (network service) to
restrict the calls that you make and receive with your device.
2. Scroll to the desired barring option, and select Options > Activate. To change
the settings, you need the barring password given by your service provider.
Call barring and call diverting cannot be active at the same time.
When calls are barred, calls may be possible to certain official emergency numbers.
Network
Select > Settings > Phone sett. > Phone > Network and from the following:
Network mode — to select which network to use (this is shown only if it is
supported by the service provider). If you select Dual mode, the device uses the
GSM or UMTS network automatically.
Operator selection — To set the device to search for and automatically select one
of the available networks, select Automatic. To select the desired network
manually from a list of networks, select Manual. The selected network must have
a roaming agreement with your home network.
Cell info display (network service) — to set the device to indicate when it is used in
a cellular network based on microcellular network (MCN) technology, and to
activate cell info reception
■ Video sharing
Use video sharing to send live video from your mobile device to another
compatible mobile device during a voice call.
Video sharing requirements
Video sharing requires a 3G universal mobile telecommunications system (UMTS)
connection. For information about network availability and the fees associated
with this application, contact your service provider.
To use video sharing you must do the following:
• Ensure that your device is set up for person-to-person connections.
• Ensure that both the sender and recipient are registered to the UMTS network.
• Ensure you have an active UMTS connection and you are within UMTS network
coverage. If you move away from a UMTS network during the sharing session,
the sharing session is discontinued, but your voice call continues.
C a l l f u n c t i o n s
23
Video sharing settings
A person-to-person connection is also known as a session initiation protocol (SIP)
connection. Before you can use video sharing, ask your service provider for the
configured SIP profile to be used in your device.
Select > Settings > Phone sett. > Connection > Video sharing and from the
following:
Video sharing — to select whether the video sharing is enabled
SIP profile — to select a SIP profile
Video saving — to set whether the live videos are automatically saved
Preferred saving memory — to select whether to save the videos to the device
memory or to a memory card
Capability alert tone — to set an alert tone to sound when video sharing is
available during a call
If you know a recipient’s SIP address, you can save it to Contacts. Select
>
Contacts, the contact, and Options > Edit > Options > Add detail > SIP or Share
video. Enter the SIP address (username@domainname). You can use an IP address
instead of a domain name.
Share live video or video clip
1. To share live video you are recording with the device camera, select Options >
Share video > Live video during a voice call. To share a saved video clip, select
Video clip and the clip you want to share.
2. The device sends the invitation to the SIP address you saved to Contacts.
If necessary, to send the invitation, select the SIP address of the recipient; or
enter a SIP address, and select OK.
3. Sharing begins automatically when the recipient accepts the invitation, and
the loudspeaker is active. Use the toolbar buttons to control the video sharing.
4. To end the sharing session, select Stop. To end the voice call, press the end key.
Accept an invitation
Your device rings when you receive an invitation. The invitation shows the
sender’s name or SIP address. Select Yes to begin the sharing session. To decline
the invitation and to return to the voice call, select No.
C a l l f u n c t i o n s
24
■ Log
To view missed, received, or dialled calls; text messages; packet data connections;
and fax and data calls registered by the device, select > Log.
In the standby mode, you can use the call key as a shortcut to Dialled numbers in
the Recent calls log (network service).
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service or software
upgrades.
4. Positioning
You can use applications such as Maps and GPS data to find out your location, or
measure distances and coordinates. These applications require a GPS connection.
■ About GPS
Your device has an internal GPS receiver.
The Global Positioning System (GPS) is operated by the government of the United States,
which is solely responsible for its accuracy and maintenance. The accuracy of location data
can be affected by adjustments to GPS satellites made by the United States government and
is subject to change with the United States Department of Defense civil GPS policy and the
Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry.
Availability and quality of GPS signals may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location measurement, and you should never rely
solely on location data from the GPS receiver and cellular radio networks for positioning or
navigation.
■ Assisted GPS
Assisted GPS (A-GPS) is used to retrieve assistance data over a packet data connection,
which assists in calculating the coordinates of your current location when your device is
receiving signals from satellites.
Your network operator may charge you for this connection according to your
network subscription. Contact your service provider for the correct internet access
point and charges related to the service.
P o s i t i o n i n g
25
Your device is preconfigured to use the Nokia A-GPS service, if no service
provider-specific A-GPS settings are available. The assistance data is retrieved
from the Nokia A-GPS service server only when needed. To disable different
positioning methods, see ‘Positioning settings,’ p. 26.
To use A-GPS, you must have a packet data internet access point defined. See
‘Positioning settings,’ p. 26.
■ Set up GPS connection
Positioning settings
Select > Settings > Phone sett. > General > Positioning and from the following:
Positioning methods — to enable or disable different positioning methods
Positioning server — To define an access point for A-GPS, select Access point. Only
a packet data internet access point can be used. Your device asks for the internet
access point when GPS is used for the first time.
Notation preferences — to define the measurement system and coordinate format
Hold your device correctly
When using the receiver, from an upright position, move the device to an angle of
about 45 degrees, with an unobstructed view of the sky.
Establishing a GPS connection may take from a couple of seconds to several
minutes, even longer in a vehicle. See ‘GPS light,’ p. 15.
Using the GPS receiver may drain the device battery faster.
If your device cannot find the satellite signal, consider the following:
• If you are indoors, go outdoors to receive a better signal.
• If you are outdoors, move to a more open space.
• Check that your hand does not cover the GPS receiver of your device.
• If the weather conditions are bad, the signal strength may be affected.
• Some vehicles have tinted (athermic) windows, which may block the
satellite signals.
Satellite signal status
To check how many satellites your device has found, and whether your device is
receiving satellite signals, select > Applications > GPS data > Position >
Options > Satellite status.
P o s i t i o n i n g
26
If your device has found satellites, a bar for each satellite is shown in the satellite
information view. When your device has received enough data from the satellite
signal to calculate the coordinates of your location, the bars turn blue.
■ Position requests
You may receive a request from a network service to receive your position
information. Service providers may offer information about local topics, such as
weather or traffic conditions, based upon the location of your device.
When you receive a position request to allow your position information to be sent,
■ Maps
The map coverage varies by country or region. For example, maps may not be
available due to legal restrictions of countries or regions. To the maximum extent
permitted by applicable law, Nokia disclaims any and all warranty with respect to
the availability, accuracy, correctness or update of maps.
About Maps
With Maps, you can see your current location on the map, browse maps for
different cities and countries, search for addresses and different points of interest,
plan routes from one location to another, and save locations as landmarks and
send them to compatible devices. You can also purchase extra services, such as
travel guides, traffic information, and navigation service with voice guidance.
These services are not available in all countries or regions.
Some maps may be pre-loaded on the memory card in your device. You can
download more maps through the internet using Nokia Map Loader PC software.
See ‘Download maps,’ p. 29.
Maps uses GPS. See ‘Positioning,’ p. 25. You can define the positioning methods
used with your device. See ‘Positioning settings,’ p. 26. For the most accurate
location information, use either the internal GPS or a compatible external
GPS receiver.
Browse maps
Select > Maps; or press the my own key. See ‘My own key,’ p. 16.
When you use Maps for the first time, you may need to select a cellular access
point for downloading map information for your current location. To change
the default access point later, select Options > Tools > Settings > Internet >
Network destination.
P o s i t i o n i n g
27
To receive a note when your device registers to a network outside your home
network, select Options > Tools > Settings > Internet > Roaming warning > On.
Contact your network service provider for details and roaming costs.
The data transfer indicator shows the internet connection used and the amount of
data transferred since the application started.
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely
on the cartography that you download for use in this device.
When you open Maps, the capital city of the country you are in or the location
that was saved from your last session is shown. The map of the location is also
downloaded, if needed.
To establish a GPS connection and zoom in to your last known location, press 0, or
select Options > My position.
A GPS indicator
on the bottom right of the display shows the
availability and strength of the satellite signal. One bar indicates one satellite.
When the device receives enough data from the satellite to establish a GPS
connection, the bar turns green. Your device must receive signals from at least
four satellites to calculate the coordinates of your location. After the initial
calculation, signals from three satellites may be enough.
To zoom in or out, press * or #. To move on the map, use the scroll keys. A new map
is automatically downloaded if you scroll to an area which is not covered by maps
already downloaded. See ‘Download maps,’ p. 29. The maps are free of charge, but
downloading may involve the transmission of large amounts of data through your
service provider's network. For more information on data transmission charges,
contact your service provider. The maps are automatically saved in the device
memory or on a compatible memory card (if inserted).
Find locations
To find a location in the city or area displayed on the map, enter the full or partial
address of the location in the search field, and press the scroll key. To find a
location in another city, enter the city and the address, and select Search.
To find a specific address, select Options > Search > Addresses. Country/Region
and City or post code are mandatory.
To browse through places and attractions by categories in your area, select
Options > Search > Places, and a category.
To find an address saved in Contacts, select Options > Search > Addresses >
Options > Select from Contacts.
P o s i t i o n i n g
28
Save and send locations
To save a location to your device, press the scroll key, and select Add > To places.
To send a location to a compatible device, press the scroll key, and select Send. If
you send the location in a text message, the information is converted to plain text.
View your saved items
To view the locations or routes you have saved to your device, select Options >
Favourites > My places or Routes.
To check which locations you have searched for on the map, select Options >
Favourites > History.
To create a collection of your favourite places, select Options > Favourites >
Collections > New collection. Enter the name for the collection. To add locations
to your collection, open My places, scroll to a location, press the scroll key, and
select Add to collection.
Download maps
When you browse a map on the display in Maps, a new map is automatically
downloaded if you scroll to an area which is not covered by maps already
downloaded. The data counter (kB) on the display shows the amount of network
traffic when you browse maps, create routes, or search for locations online.
Downloading maps may involve the transmission of large amounts of data through your
service provider’s network. Contact your service provider for information about data
transmission charges.
To prevent automatic downloading of maps, for example, when you are outside
your home network, select Options > Tools > Settings > Internet > Go online at
start-up > No.
To define the memory to be used and how much memory space you want to use
for saving maps or voice guidance files, select Options > Tools > Settings >
Map > Memory to be used and Maximum memory use. When the memory is full,
the oldest map data is deleted. The saved maps data can be deleted using Nokia
Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to download and install maps
and extra services from the internet to a compatible memory card. Use the Maps
application and browse maps at least once before using Nokia Map Loader, as
Nokia Map Loader uses the Maps history information.
P o s i t i o n i n g
29
follow the instructions on the screen.
Plan a route
To plan a route, select a location on the map or search for a location, press the
scroll key, and select Add to route.
To add more locations for your route, select Options > Add route point, and search
for the location.
To edit the route, press the scroll key, and select Edit.
To define the settings for the route, select Options > Settings.
To show the route on the map, select Options > Show route.
To navigate to the destination by car or on foot, if your have purchased these extra
services, select Options > Start driving or Start walking.
To save the route, select Options > Save route.
Extra services for Maps
You can purchase a navigation licence and download different kinds of travel
guides to your device. You can purchase a licence for pedestrian or car navigation
and traffic information service.
Downloading extra services may involve the transmission of large amounts of data through
your service provider’s network. Contact your service provider for information about data
transmission charges.
Navigate to the destination
Tip: To try out navigation for a certain time with a free licence, select
Maps > Options > Drive to or Walk to. Maps checks if a free licence is
available for your device. To activate the licence, select OK. You can only
use the licence once.
To purchase a licence for pedestrian and car navigation with voice guidance,
select Options > Extras > Drive & Walk. To purchase a licence for pedestrian
navigation only, select Walk. You can pay for the service using a credit card or in
your phone bill, if supported by your service provider.
To start navigating, select a location, press the scroll key, and select Drive to or
Walk to.
When you use car navigation for the first time, your device asks you to select the
language for the voice guidance and download the voice guidance files. To change
P o s i t i o n i n g
30
the language later, in the Maps main view, select Options > Tools > Settings >
Navigation > Voice guidance. Voice guidence is not available for pedestrian
navigation.
To switch between different map views during the navigation, press the scroll key,
and select Manoeuvre view, Bird’s-eye view, or Arrow view.
To discard the created route and use another route, select Options > Diff. route.
To stop navigating, select Options > Stop.
Traffic information
The real-time traffic information service is an extra service that provides
information about events that may affect your travel. You can purchase the
service and download it to your device if available in your country or region.
To purchase a licence for the traffic information service, select Options > Extras >
Traffic info.
To view information about traffic events, select Options > Traffic info. The events
are shown on the map as triangles and lines.
To view details of an event, including possible rerouting options, select the event
and Options > Open.
To update the traffic information, select Update traffic info.
Travel guides
To purchase and download travel guides, or to view downloaded ones, select
Options > Extras > Guides.
To browse travel guide categories, select a category. If there are subcategories,
select a subcategory.
To download a new guide to your device, scroll to the desired guide, and select
Yes. You can pay for the guides using a credit card or in your phone bill, if
supported by your service provider.
■ Landmarks
Select > Applications > Landmarks. With Landmarks you can save the position
information of specific locations in your device. You can use your saved landmarks
in compatible applications, such as GPS data and Maps.
To create a new landmark, select > Applications > Landmarks > Options >
New landmark. To make a positioning request for the coordinates of your location,
P o s i t i o n i n g
31
select Current position. To enter the position information manually, select
Enter manually.
To add a landmark to preset categories, select the landmark, and Options > Add to
category. Select the categories to which you want to add the landmark.
To send one or several landmarks to a compatible device, select Options > Send.
Your received landmarks are placed in Inbox in Messaging.
■ GPS data
GPS data is designed to provide route guidance information to a selected
destination, position information about your location, and travelling information,
such as the approximate distance and travel time to the destination.
Route guidance
Start the route guidance outdoors. Select > Applications > GPS data >
Navigation.
Route guidance shows the straightest route and the shortest distance to the
destination, measured in a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences in altitude are not taken
into account when calculating the distance. Route guidance is active only when
you move.
To set your trip destination, select Options > Set destination and a landmark as
the destination, or enter the latitude and longitude coordinates. To clear the
destination, select Stop navigation.
Position
To save your location as a landmark, select > Applications > GPS data >
Position > Options > Save position.
Trip meter
To activate trip distance calculation, select > Applications > GPS data > Trip
distance > Options > Start. To deactivate it, select Options > Stop. The calculated
values remain on the display.
To set the trip distance and time and average and maximum speeds to zero, and to
start a new calculation, select Reset. To set the odometer and total time to zero,
select Restart.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be
affected by availability and quality of GPS signals.
P o s i t i o n i n g
32
5. Write text
■ Traditional and predictive text input
When you write text,
on the display indicates predictive text input and
traditional text input. To set the predictive text input on or off, press # repeatedly,
or press *, and select Activate predictive text or Predictive text > Off.
,
,
or
next to the text input indicator indicates the character
case or number mode. To change the character case, or to change between letter
and number mode, press # repeatedly.
To change the writing language of your device, select > Settings > Phone
sett. > General > Personalisation > Language > Writing language. The writing
language affects the characters available when writing text and the predictive
text dictionary used. Not all characters available under a number key are printed
on the key.
Write with traditional text input
Press a number key, 2 to 9, repeatedly until the desired character appears. Press
the 1 key for the most common punctuation marks and special characters.
If the next letter you want is on the same key as the present one, wait until the
cursor appears (or scroll forward to end the time-out period), and enter the letter.
Write with predictive text input
1. Press a number key, 2–9, only once for one letter. The word changes after every
keypress. For the most common punctuation marks, press 1.
2. When you have finished the word and it is correct, to confirm it, scroll forward
or insert a space.
If the word is not correct, to view the matching words the dictionary has found
one by one, press * repeatedly.
If the ? character is shown after the word, the word you intended to write is
not in the dictionary. To add a word to the dictionary, select Spell. Enter the
word (up to 32 letters), and select OK. The word is added to the dictionary.
When the dictionary becomes full, a new word replaces the oldest added word.
Common functions in traditional and predictive text input
To insert a number, press and hold the number key.
To enter punctuation marks and special characters, press and hold *.
W r i t e t e x t
33
To erase a character, press the clear key. To erase more characters, press and hold
the clear key.
To insert a space, press 0. To move the cursor to the next line, press 0 three times.
■ Copy and delete text
1. To select letters and words, press and hold #, and at the same time scroll left or
right. To select lines of text, press and hold #, and at the same time scroll up or
down.
2. To copy the text, press and hold #, and at the same time select Copy.
To delete the selected text, press the clear key.
3. To insert the text, scroll to the insertion point, press and hold #, and at the
same time select Paste.
6. Messaging
Before you can receive or send messages or e-mail, you must have the necessary
settings and access points defined. Contact your service provider for the settings.
■ Write and send messages
Your device supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use accents or other marks, and characters
from some language options, take up more space, limiting the number of characters that can
be sent in a single message.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
1. Select > Messaging > New message and the message type. To create a text
message or multimedia message, select Message. The message type changes
automatically based on the content.
2. In the To field, enter the phone numbers or e-mail addresses of the recipients,
or, to select recipients from Contacts, press the scroll key. Separate recipients
with a semicolon (;).
M e s s a g i n g
34
3. To enter the subject for a multimedia, or e-mail message, scroll down to the
Subject field. If the subject field is not visible for a multimedia message, select
Options > Message header fields, mark Subject, and select OK.
4. Scroll down to the message field and enter the message content.
When you write a text message, the message length indicator shows how
many characters you can enter in the message. For example, 10 (2) means
that you can still add 10 characters for the text to be sent as a series of two
text messages.
To insert an object, such as an image, video clip, note, or a business card, to a
multimedia, or e-mail message, press the scroll key, and select Insert content.
To record a new sound clip for an audio message, select Record. To use
a previously recorded sound clip, select Options > Insert sound clip >
From Gallery.
5. To send the message, select Options > Send.
■ Inbox
Inbox contains received messages except e-mail and cell broadcast messages. To
read received messages, select > Messaging > Inbox and the message.
To view the list of media objects that are included in the multimedia message,
open the message, and select Options > Objects.
Your device can receive many kinds of messages, such as operator logos, business
cards, calendar entries, and ringing tones. You can save the special message
content to your device. For example, to save a received calendar entry to the
calendar, select Options > Save to Calendar.
The appearance of a message may vary depending on the receiving device.
■ Service messages
Service messages (network service) are notifications that may contain a text
message or the address of a browser service.
To define whether service messages are enabled and whether the messages are
downloaded automatically, select > Messaging > Options > Settings >
Service message.
■ E-mail
When you create a new mailbox, the name you give to the mailbox replaces New
mailbox. You can have up to six mailboxes.
M e s s a g i n g
35
IMAP4 and POP3 mailboxes
Select > Messaging and the mailbox. Connect to mailbox? is displayed. To
connect to your mailbox (network service), select Yes, or to view previously
retrieved e-mail messages offline, select No.
To connect to the mailbox afterwards, select Options > Connect. When you are
online, to end the data connection to the remote mailbox, select Options >
Disconnect.
Retrieve and read e-mail messages
1. Select Options > Retrieve e-mail and whether you want to retrieve new,
selected, or all messages.
2. To open an e-mail message, select it.
To view e-mail attachments, indicated with , select Options > Attachments.
You can retrieve, open, or save attachments in supported formats.
Delete e-mail messages
To delete an e-mail message from the device and retain it in the remote mailbox,
select Options > Delete > Phone only. To delete an e-mail from both the device
and the remote mailbox, select Options > Delete > Phone and server.
To cancel deletion of an e-mail from both the device and server, scroll to an e-mail
that has been marked to be deleted during the next connection, and select
Options > Restore.
Sync mailboxes
Select > Messaging and the sync mailbox.
To synchronise your device with the remote mailbox, select Options >
Synchronisation > Start.
To view received messages, select Inbox and the message.
■ Outbox
The outbox folder is a temporary storage place for messages that are waiting to be
sent. To access the outbox folder, select > Messaging > Outbox.
To retry sending a message, scroll to the message and select Options > Send.
To postpone sending a message, scroll to a message, and select Options >
Defer sending.
M e s s a g i n g
36
■ Message reader
To listen to a message in Inbox or a mailbox, scroll to the message or mark the
messages, and select Options > Listen.
Tip: When you have received a new message, to listen to the received
messages, in the standby mode, press and hold the left selection key until
Msg. reader starts.
To select the default language and voice used for reading messages, and adjust
the voice properties, such as rate and volume, select > Settings > Speech.
To select other settings for the message reader, in Speech, scroll right to Settings.
■ View messages on the SIM card
Before you can view SIM messages, you need to copy them to a folder in your
device. Select > Messaging > Options > SIM messages, mark the messages you
want to copy, and select Options > Copy and the folder to which you want to copy
the messages.
■ Cell broadcast
Check with your service provider whether cell broadcast (network service) is
available and what the available topics and related topic numbers are.
Select > Messaging > Options > Cell broadcast. To activate the service, select
Options > Settings > Reception > On.
■ Service commands
To enter and send service commands (also known as USSD commands) such as
activation commands for network services to your service provider, select
Messaging > Options > Service commands. To send the command, select
Options > Send.
>
■ Messaging settings
Text message settings
To define text message settings, such as the message centre and character
encoding used, select > Messaging > Options > Settings > Text message.
Multimedia messaging settings
To define multimedia message settings, such as which access point is used and
whether multimedia messages are retrieved automatically, select
>
Messaging > Options > Settings > Multimedia message.
M e s s a g i n g
37
E-mail settings
Select > Messaging > Options > Settings > E-mail > Mailboxes, the mailbox
and from the following:
Connection settings — to define the connection settings, such as the servers and
protocol used
User settings — to define user settings, such as when messages are sent and
whether to include a signature
Retrieval settings — to define retrieval settings, such as which parts of the
messages are retrieved and how many messages are retrieved
Automatic retrieval — to define settings for retrieving messages automatically at
set intervals or when an e-mail notification is received from the server
Other settings
To define whether a specified number of sent messages are saved to the Sent
folder and whether to store the messages in the device memory or memory card,
select > Messaging > Options > Settings > Other.
7. Contacts
■ Save and manage contact information
To save and manage contact information, such as names, phone numbers, and
addresses, select > Contacts.
To add a new contact, select Options > New contact. Fill in the fields you want,
and select Done.
To set your device to show contacts in the device memory and in the SIM card in
the list of contacts, select Options > Settings > Contacts to display, and mark
Phone memory and SIM memory.
To copy names and numbers from a SIM card to your device or vice versa, scroll to
the contact (or mark the desired contacts), and select Options > Copy > Phone
memory or SIM memory.
To view information about the memory consumption of contacts, select Options >
Contacts info.
To view the list of fixed dialling numbers, select Options > SIM numbers > Fixed
dial contacts. This setting is only shown if supported by your SIM card.
C o n t a c t s
38
When fixed dialling is activated, calls may be possible to the official emergency number
programmed into your device.
To assign default numbers and addresses to a contact, select it, and select
Options > Defaults. Scroll to the desired default option, and select Assign.
■ Contact groups
To create a contact group so that you can send text or e-mail messages to several
recipients at the same time, select > Contacts. Scroll right, and select
Options > New group. Enter a name for the group, and open the group. Select
Options > Add members. Mark the contacts you want to add to the group, and
select OK.
■ Add a ringing tone
You can set a ringing tone or a video ringing tone for each contact and group. To
add a ringing tone to a contact, select > Contacts, and open the contact. Select
Options > Ringing tone and the ringing tone. To add a ringing tone to a group,
scroll right to the groups list, and scroll to a contact group. Select Options >
Ringing tone and the ringing tone for the group. To remove the personal or group
ringing tone, select Default tone as the ringing tone.
8. Gallery
■ Main view
To save and organise your images, videos, music tracks, sound clips, playlists,
streaming links, .ram files, and presentations, select > Gallery.
To copy or move files to device memory or to the memory card, select the folder
(such as Images), scroll to the file (or press # to mark more files), and select
Options > Organise and the memory to where you want to copy or move the files.
To create new image and video folders, select Images or Video clips > Options >
Organise > New folder and the memory. Enter a name for the folder. To move
images and videos to a folder you created, mark the files, and select Options >
Organise > Move to folder and the folder.
To set an image as the wallpaper or to be shown during a call, select Images, and
scroll to the image. Select Options > Use image > Set as wallpaper or Set as call
image. To assign the image to a contact, select Assign to contact.
G a l l e r y
39
To set a video as a video ringing tone, select Video clips, and scroll to the video.
Select Options > Use video > As ringing tone. To assign the video for a contact,
select Assign to contact.
■ Download files
To download images or videos, select > Gallery > Images or Video clips and the
image icon (Dwnl. imgs.) or the video icon (Downld. videos). The browser opens.
Choose a bookmark for the site to download from.
■ Edit images
To edit images in Gallery, scroll to the image, and select Options > Edit.
Shortcuts in the image editor:
• To view an image in the full screen, and to return to the normal view, press *.
• To rotate an image clockwise or counterclockwise, press 3 or 1.
• To zoom in or out, press 5 or 0.
• To move on a zoomed image, scroll up, down, left, or right.
To crop or rotate the image; adjust the brightness, colour, contrast, and
resolution; and add effects, text, clip art, or a frame to the picture, select
Options > Apply effect.
■ Edit video clips
To edit videos in Gallery and create custom video clips, scroll to a video clip, and
select Options > Video editor > Options > Edit video clip.
In the video editor you can see two timelines: video clip timeline and sound clip
timeline. The images, text, and transitions added to a video are shown on the
video clip timeline. To switch between the timelines, scroll up or down.
■ Watch images and video clips on TV
To watch images and video clips on a compatible TV, use a compatible video-out
cable, and set the TV-out settings for the applicable TV system and TV aspect
ratio. Select > Settings > Phone sett. > General > Enhancement. To improve the
image quality of the TV screen, select Flicker filter > On.
1. To watch images and video clips on TV, first connect the video-out cable to the
video input of a compatible TV.
G a l l e r y
40
2. Connect the other end of the video-out
cable to the Nokia AV Connector of your
device.
3. Select > Gallery > Images or Video
clips and the file you want to view.
■ Print images
You can use the device with a PictBridge-
compatible printer using USB cable.
To print images in Gallery, scroll to the image, and select Options > Print.
■ Print online
With Print online, you can contact print online service providers to order prints of
your images online and have them sent directly to your home or to a store where
you can pick them up. Contact your print online service provider for the costs,
applicable terms and available products.
To use Print online, you must have at least one printing service configuration file
installed. The files can be obtained from printing service providers that support
Print online.
Order prints
You can only order prints of images that are in .jpeg format.
1. Select > Gallery > Images.
2. To mark the images you want to order, press #, and select Options > Order prints.
3. Select a service provider from the list, and select Options > Open. To view the
details of the previous orders, select Log.
4. If the service offered is a single shop service, you are connected to the service
provider. Select Preview to view the image before ordering a print. To send your
order, select Options > Order now.
If the service offered is a retailer group service, you are connected to the
service provider, and need to select a store from where you want to collect
your prints. Depending on the service provider, you may have options for
browsing and searching for stores with different search criteria.
To check details, such as opening hours of the selected store, select Options >
Info (if provided by the service provider).
Select the desired retail pick up point. To send your order, select Options >
Order now.
G a l l e r y
41
■ Share online
With the Share online application, you can share the images and video clips you
have captured in compatible online albums, weblogs, or other compatible online
sharing services on the web. You can upload content, save unfinished posts as
drafts and continue later, and view the content of the albums. The supported
content types may vary depending on the online sharing service provider.
To share images and videos online, you must have an account with an online
image sharing service. You can usually subscribe to such a service on the web
page of your service provider. Contact your service provider for more information
and applicable terms and costs.
Select > Internet > Share online. To update the list of service providers, select
Options > Add new account > Update services. Some online sharing service
providers may allow you to add an account using your device. See ‘Share online
settings,’ p. 43.
Upload files
To upload files, select > Gallery > Images or Video clips. Mark the files to
upload, and Options > Send > Post to web and a sharing service.
When you select the service, the selected images and videos are shown in the edit
state. You can open and view the files, reorganise them, add text to them, or add
new files.
To cancel the web upload process and save the created post as a draft, select
Cancel > Save as draft.
To connect to the service and upload the files to the web, select Options >
Post to web.
Open online service
To view uploaded images and videos in the online service and draft and sent
entries in your device, select > Internet > Share online. To update a service,
scroll to it, and select Options > Update service.
Select Options and from the following:
Go to ... webs. — to connect to the service and view the uploaded and draft albums
in the web browser. The view may vary depending on the service provider.
Outbox — to view and edit the draft entries and upload them to the web
New post — to create a new entry
The available options may vary depending on the service provider.
G a l l e r y
42
Share online settings
To edit the share online settings, select > Internet > Share online > Options >
Settings and from the following:
Service providers — to view the list of service providers
My accounts — To create a new account, select Options > Add new account. To
edit an existing account, select an account and Options > Edit. You can enter the
name for the account and the user name and password for your account.
Application settings — to select the size for the images shown on the display and
the font size used in drafts or text entries
Advanced — to select the default access point and the way for polling new
content from the server, to enable content to be downloaded while roaming and
all image data to be published.
9. Camera
Your device has two cameras to capture still images and record videos. A high
resolution main camera is on the back of the device using landscape mode, and a
Your device supports an image capture resolution of 2592x1944 pixels using the main
camera. The image resolution in this guide may appear different.
The images and video clips are saved in corresponding folders in Gallery.
You can send images and video clips in a multimedia message, as an e-mail
attachment, or by using Bluetooth connectivity. You can also upload them to
a compatible online album. See ‘Share online,’ p. 42.
■ Capture images
Main camera
1. To activate the main camera, open the lens cover. Make sure that
the lens cover is fully open.
indicates still image mode.
2. To zoom in or out, press the volume keys.
To make lighting and colour adjustments before taking a picture,
select from the active toolbar settings. See ‘Active toolbar,’ p. 44
and ‘Scenes,’ p. 46.
C a m e r a
43
You can lock the focus on an object by pressing the capture key halfway down.
If the focus was not locked, the red focus indicator appears. Release the
capture key, and press it halfway down again.
3. To take a picture, press the
camera key.
4. To close the main camera,
close the lens cover.
Secondary camera
1. To activate the secondary camera in the standby mode, keep the lens cover
closed, and select > Applications > Camera. If you have the main camera
activated, select Options > Use secondary camera.
2. To zoom in or out, scroll up or down.
3. To take a picture, press the scroll key.
Active toolbar
The active toolbar provides you with shortcuts to different items and settings
before capturing an image or recording a video. Scroll to icons, and select them
by pressing the scroll key.
If you want the active toolbar to be visible before and after capturing an image or
recording a video, select Options > Show toolbar. To view the active toolbar only
for 5 seconds when pressing the scroll key, select Options > Hide toolbar.
In the active toolbar, select from the following:
Switch to video mode (
Switch to image mode) — to switch between the
video and image modes
Scene modes — to select the scene
Flash mode — to select the flash mode (images only). To activate the red-eye
reduction, select Red-eye. Avoid capturing image or zoom in very close to the
object. The red-eye reduction may not be shown until the image is saved in the
Gallery.
Keep a safe distance when using the flash. Do not use the flash on people or animals at close
range. Do not cover the flash while taking a picture.
Self timer — to activate the self-timer (main camera only). Select the
self-timer delay, and to activate the self-timer, select Activate.
C a m e r a
44
Sequence mode — to activate the sequence mode (images only). See ‘Capture
images in sequence,’ p. 46.
Go to Gallery — to open the Gallery
To customise the toolbar, select Options > Customise toolbar. You can remove an
item from the toolbar, or change, add, or move items.
The available options vary depending on the capture mode and view you are in.
The setup settings return to the default settings when you close the camera.
If you select a new scene, the colour and lighting settings are replaced by the
selected scene. See ‘Scenes,’ p. 46. You can change the setup settings after
selecting a scene if needed.
Location information
With geotagging, you can add information about the geographic location where
the image was captured to the file details of the photograph. You can use this
information in other applications. For example, in Maps you can see what
photographs of different locations are available on a map.
To activate geotagging in the camera, select Options > Settings > Record
location > On.
When the location information is added to the image information,
at the bottom of the display. If no positioning information is available from
satellites, is displayed.
is shown
If the location information is not available, GPS stays on in the background for
a few minutes. If a satellite connection is found within that time, all the images
captured during that time are tagged based on the received GPS positioning
information. See ‘Still image camera settings,’ p. 47.
After capturing an image
After you capture an image, select the following from the active toolbar (available
only if Show captured image is set to On in still image camera settings):
• To send the image, press the call key, or select Send ( ).
• To send the image to a compatible online album, select Sign in for
Share online (
)
• To open the Gallery, select Go to Gallery ( ).
• If you do not want to keep the image, select Delete ( ).
C a m e r a
45
• To use the image as wallpaper in the standby mode, select Options > Set as
wallpaper.
• To set the image as a call image for a contact, select Options > Set as contact
call img..
Capture images in sequence
You can set the main camera to capture six images or more in a sequence. In the
active toolbar, select Sequence mode > Burst. To capture images, press the
camera key. To capture more than six images, press and hold the camera key. The
number of images captured depends on the available memory.
To use a time interval between capturing images, select Sequence mode and a
time interval. To start capturing images, press the camera key. To stop capturing
images before the time ends, press the camera key again.
After you have captured the images, they are shown in a grid on the display. To
view an image, press the scroll key to open it.
You can also use the sequence mode to capture up to six images using the self-
timer.
To return to the sequence mode viewfinder, press the camera key.
To switch off the sequence mode, in the active toolbar, select Sequence mode >
Single shot.
Scenes
A scene helps you to find the right colour and lighting settings for the
environment. The settings of each scene have been set according to a certain style
or environment. Scenes are only available in the main camera.
Select the image or video mode, and in the active toolbar, select Scene modes and
a scene available for the image or video mode.
To make your own scene suitable for a certain environment, scroll to User defined,
and select Options > Change. To copy the settings of another scene, select Based
on scene mode and the desired scene.
■ Record videos
1. To activate the main camera, open the lens cover. If the camera is in the image
mode, change to video mode. In active toolbar, select Switch to video mode.
indicates video mode.
To activate the secondary camera, select Options > Use secondary camera.
C a m e r a
46
2. Press the camera key to start recording. With the secondary camera, press the
scroll key for recording.
recording has started.
is shown and a tone sounds, indicating that
To zoom in or out of the subject using the main camera, press the volume keys,
or, using the secondary camera, scroll down or up.
3. To stop recording, select Stop. The video clip is automatically saved to the
Video clips folder in the Gallery. See ‘Gallery,’ p. 39. The maximum length of
the video clip depends on the available memory.
To pause recording at any time, select Pause. Video recording automatically stops
if recording is set to pause and there are no keypresses within a minute. Select
Continue to resume recording.
To make lighting and colour adjustments before recording a video, select from the
active toolbar settings. See ‘Active toolbar,’ p. 44 and ‘Scenes,’ p. 46.
After recording a video
After you record a video clip, select the following from the active toolbar
(available only if Show captured video is set to On. See ‘Video settings,’ p. 48):
• To immediately play the video clip you just recorded, select Play
.
• To send the video clip using a multimedia message, e-mail, or Bluetooth
connectivity, press the call key, or select Send ( ). You may not be able to
send video clips saved in the .mp4 file format in a multimedia message.
• To upload the video clip to a compatible online album, select Sign in for
Share online ( ).
• To open the Gallery, select Go to Gallery ( ).
• If you do not want to keep the video, select Delete ( ).
■ Camera settings
There are two kinds of settings for the still image camera: active toolbar settings
and main settings. To use active toolbar settings, see ‘Active toolbar,’ p. 44. The
active toolbar settings return to the default settings after you close the camera,
but the main settings remain the same until you change them again.
Still image camera settings
To change the main settings, select Options > Settings.
To set the image resolution (only available in the main camera), select Image
quality. The better the image quality, the more memory the image consumes. To
C a m e r a
47
print the image, select Print 5M - Large, Print 3M - Medium, or Print 2M - Medium.
To send it through e-mail, select E-mail 0.8M - Med.. To send the image through
multimedia messaging (MMS), select MMS 0.3M - Small.
To select whether to see the captured image after it is captured or to continue
capturing images immediately, select Show captured image.
To add GPS location coordinates to each image file, select Record location > On.
Receiving a GPS signal may take time or the signal may not be available.
To allow the zoom increments to be smooth and continuous between digital and
extended digital zoom, select Extended digital zoom > On (continuous) (main
camera only). To allow the zoom increments to pause at the digital and extended
digital step point, select On (paused). To limit the zoom to where the selected
image quality is maintained, select Off.
To return the default values to the camera settings, select Restore camera settings.
Video settings
To change the main setting in video mode, select Options > Settings.
To set the quality of the video clip, select Video quality. Select Sharing if you want
to send the video clip using a multimedia message.
To add GPS location coordinates to the video clip, select Record location > On.
Receiving a GPS signal may take time or the signal may not be available.
To mute sound recording, select Audio recording > Mute.
To view the first frame of the recorded video clip after the recording stops, select
Show captured video. To view the video clip from the active toolbar, select Play
(main camera) or Options > Play (secondary camera).
To apply the default values to the camera settings, select Restore camera settings.
10. Media
■ Music player
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
M e d i a
48
You can listen to music and podcast episodes also when the offline profile is
activated. See ‘Offline profile,’ p. 14.
For more information about copyright protection, see ‘Licences,’ p. 67.
Listen to music or a podcast episode
1. Select > Music player.
2. To refresh the music library in your device, select Options > Refresh.
3. Select Music or Podcasts, the category, such as All songs or Podcasts >
All episodes, and a song or a podcast episode to listen to.
4. To play the selected file, press the scroll key.
To pause, press the scroll key; to resume the playback, press the
scroll key again.
5. To stop the playback, scroll down.
To fast forward or rewind, press and hold the scroll key right or left.
To skip forward, scroll right. To return to the beginning of the song or podcast,
scroll left.
To skip to the previous song or podcast, scroll left again within 2 seconds after a
song or podcast has started.
To adjust the volume, use the volume key.
To return to the standby mode and leave the player in the background, press the
end key. Depending on the selected standby theme, the currently playing song is
displayed. To return to the music player, select the currently playing song.
Music menu
Select > Music player > Music. The music menu shows the available music. To
view all songs, sorted songs, or playlists, select the desired list in the music menu.
Playlists
Select > Music player > Music > Playlists. To view details of the playlist, select
Options > Playlist details.
Create a playlist
1. Select Options > Create playlist.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes. To add songs later, select No.
M e d i a
49
4. Select artists to find the songs you want to include in the playlist. To add a
song, press the scroll key.
5. When you have made your selections, select Done. If a compatible memory
card is inserted, the playlist is saved to the memory card.
To add more songs later, when viewing the playlist, select Options > Add songs.
Podcast
To view all the podcast episodes available in your device, select > Music
player > Podcasts > All episodes.
The podcast episodes have three states; never played, partially played, and
completely played. If an episode is partially played, it plays from the last playback
position the next time it is played. Otherwise, it is played from the beginning.
Nokia Music Store
In the Nokia Music Store (network service) you can search, browse, and purchase
music for downloading to your device. To purchase music, you first need to
register for the service. To check the Nokia Music Store availability in your
To access the Nokia Music Store, you must have a valid internet access point in
your device. To open Nokia Music Store, select > Music player > Music >
Options > Go to Music store.
Transfer music
You can buy music protected with WMDRM from online music shops and transfer
the music to your device.
To refresh the library after you have updated the song selection in your device,
select > Music player > Music > Options > Refresh.
Transfer music from PC
To synchronise music with Windows Media Player, connect the compatible USB
cable and select Media transfer as the connection mode. You can transfer
WMDRM protected music files only using media transfer. A compatible memory
card needs to be inserted in the device.
To use Nokia Music Manager in Nokia PC Suite, see the Nokia PC Suite user guide.
M e d i a
50
■ Nokia Podcasting
With the Nokia Podcasting application (network service), you can search, discover,
subscribe to, and download podcasts over the air, and play, manage, and share
audio podcasts with your device.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
Settings
To use Nokia Podcasting, you must set your connection and download settings.
Setting the application to retrieve podcasts automatically may involve the transmission of
large amounts of data through your service provider's network. Contact your service
provider for information about data transmission charges.
Select > Music player > Podcasts > Options > Go to Podcasting > Options >
Settings and from the following:
Connection > Default access point — to select the access point to define your
connection to the internet. To define the podcast search service for searches,
select Search service URL.
Download — to edit the download settings. You can select whether to save your
podcasts to the device or the memory card; set how often podcasts are updated
and set the time and date for the next automatic update; and set how much
memory space to use for podcasts, and what to do if the downloads exceed the
download limit.
Search
To set the search engine to use the podcast search service, select
>
Music player > Podcasts > Options > Go to Podcasting > Options > Settings >
Connection > Search service URL.
To search for podcasts, select > Music player > Podcasts > Options > Go to
Podcasting > Search, and enter a keyword or a title.
To subscribe to a channel and add it to your podcasts, select Options > Subscribe.
You can also mark channels to add them all at the same time.
Directories
Directories help you to find new podcast episodes to which to subscribe.
An episode is a particular media file of a podcast.
M e d i a
51
Select > Music player > Podcasts > Options > Go to Podcasting > Directories.
Select a directory folder to update it (network service). When the colour of the
folder icon changes, select to open it, and select a folder topic to view the list
of podcasts.
To subscribe to a podcast, select the title. After you have subscribed to episodes of
a podcast, you can download, manage, and play them in the podcasts menu.
To add a new directory or folder, select Options > New > Web directory or Folder.
Select a title, URL of the .opml (outline processor markup language) file, and Done.
To import an .opml file saved on your device, select Options > Import OPML file.
Select the location of the file, and import it.
When you receive a message with an .opml file using Bluetooth connectivity, open
the file and save it to the Received folder in directories. Open the folder to
subscribe to any of the links to add to your podcasts.
Downloads
To see the podcasts you have subscribed to, select > Music player > Podcasts >
Options > Go to Podcasting > Podcasts. To see individual episode titles, select the
podcast title.
To start a download, select the episode title. To download or to continue to
download selected or marked episodes, select Options > Download or Continue
download. You can download multiple episodes at the same time.
To play a portion of a podcast during download or after partial downloading,
select Podcasts > Options > Play preview.
Fully downloaded podcasts are saved in the Podcasts folder when the music
library is refreshed.
Play and manage podcasts
To display the episodes from a podcast, open the podcast. Under each episode, you
see the file information.
To play a fully downloaded episode, select > Music player > Podcasts.
To update the selected podcast or marked podcasts, for a new episode, select
Options > Update.
To add a new podcast by entering the URL of the podcast, select Options >
New podcast. To edit the URL of a selected podcast, select Edit.
To update, delete, and send a group of selected podcasts at once, select Options >
Mark/Unmark, mark the podcasts, and select Options and the desired action.
M e d i a
52
To open the website of the podcast (network service), select Options >
Open web page.
Some podcasts provide the opportunity to interact with the creators by
commenting and voting. To connect to the internet to do this, select Options >
View comments.
■ FM Radio
To open the radio, select > Applications > Radio. To turn the radio off,
select Exit.
When you open the radio for the first time, a wizard helps you to save local radio
stations (network service).
To check availability and costs of the visual service and station directory services,
contact your service provider.
The FM radio depends on an antenna other than the wireless device antenna. A compatible
headset or enhancement needs to be attached to the device for the FM radio to function
properly.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
The radio supports Radio Data System (RDS) functionality. Radio stations
supporting RDS may display information, such as the name of the station. If
activated in the settings, RDS also attempts to scan for an alternative frequency
for the currently playing station, if the reception is weak. To set your device
automatically search for alternative frequencies, select Options > Settings >
Alternative frequencies > Auto scan on.
Tune and save a radio station manually
To start the station search when the radio is on, scroll up or down. To save the
station when a station is found, select Options > Save station. Select a location
for the station, enter the name for it, and select OK.
To view the list of saved stations, select Options > Stations. To change the
settings of a station, select the station and Edit.
Radio functions
To adjust the volume, press the volume keys.
If there are any saved stations, scroll right or left to the next or previous stations.
M e d i a
53
You can make or answer a call while listening to the radio. The radio is muted
when there is an active call.
To listen to the radio in the background and go to the standby mode, select
Options > Play in background.
View visual content
To check availability and costs, and to subscribe to the service, contact your
service provider.
To view visual content of the current station, select Options > Start visual service.
Station needs to have visual service ID saved before service can be used.
To end the visual content feed but continue listening to the radio, select Close.
Station directory
To access the station directory (network service), select Options > Station directory
and your location. Radio stations that provide visual content are indicated with
.
To listen to or save a station, scroll to it, and select Options > Listen or Save.
■ RealPlayer
With RealPlayer, you can play media files such as video clips saved in the device
memory or memory card, or stream media files over the air by opening a streaming
link. RealPlayer does not support all file formats or all the variations of file
formats.
Select > Applications > RealPlayer. To play, select Video clips, Streaming links,
or Recently played and a media file or a streaming link.
To stream live content, you must first configure your default access point. Select
> Applications > RealPlayer > Options > Settings > Streaming > Network.
Contact your service provider for more information.
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
■ Recorder
With voice recorder, you can record voice call conversations and voice memos.
If you record a phone conversation, all parties hear a beeping sound during
recording.
Select > Applications > Recorder. To record a sound clip, select Options >
Record sound clip, or select . To listen to the recording, select
. Recorded
files are saved in the Sound clips folder in Gallery.
M e d i a
54
11. Internet
■ Browse the web
To browse web pages, select > Internet > Web, or press and hold 0 in the
standby mode.
Check the availability of services, pricing, and tariffs with your service provider.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
To access web pages, do one of the following:
• Select a bookmark from the bookmarks view.
• In the bookmarks view, enter the address of the web page, and select Go to.
Bookmarks
To add a bookmark manually, in the bookmarks view, select Options > Bookmark
manager > Add bookmark, fill in the fields, and select Options > Save.
Connection security
If the security indicator is displayed during a connection, the data transmission
between the device and the internet gateway or server is encrypted.
The security icon does not indicate that the data transmission between the gateway and the
content server (or place where the requested resource is stored) is secure. The service
provider secures the data transmission between the gateway and the content server.
To view details about the connection, encryption status, and information about
server authentication, select Options > Tools > Page info.
Keys and commands for browsing
To open a link, make selections, or check boxes, press the scroll key.
To go to the previous page while browsing, select Back. If Back is not available,
select Options > Navigation options > History to view a chronological list of the
pages visited during a browsing session. To choose the desired page, scroll left or
right, and select it. The history list is cleared each time a session is closed.
To save a bookmark while browsing, select Options > Save as bookmark.
To retrieve the latest content from the server, select Options > Navigation
options > Reload.
I n t e r n e t
55
To open the browser toolbar, scroll to an empty part of the page, and press and
hold the scroll key.
To end the connection and view the browser page offline, select Options > Tools >
Disconnect. To stop browsing, select Options > Exit.
Keypad shortcuts while browsing
1 — Open your bookmarks.
2 — Search for keywords in the current page.
3 — Return to the previous page.
5 — List all open windows.
8 — Show the page overview of the current page. Press 8 again to zoom in and
view the desired section of the page.
9 — Enter a new web address.
0 — Go to the start page.
* or # — Zoom the page in or out.
Mini map
Mini map helps you navigate web pages that contain large amount of
information. When Mini map is on in browser settings and you scroll through
a large web page, Mini map opens and displays an overview of the web page
you are browsing. To move in Mini map, scroll. When you stop scrolling,
Mini map disappears and the area outlined in Mini map is displayed.
Page overview
With Page overview, you can move more quickly to the desired part of a web page.
Page overview may not be available on all pages.
To show the page overview of the current page, press 8. To find the desired spot on
the page, scroll up or down. Press 8 again to zoom in and view the desired section
of the page.
Web feeds
Web feeds are widely used to share the latest headlines or recent news.
The browser automatically detects if a web page contains web feeds. To subscribe
to a web feed, select Options > Subscribe to web feeds and a feed, or click on the
link. To view the web feeds you have subscribed to, in the bookmarks view, select
Web feeds.
To update a web feed, select it, and Options > Refresh.
I n t e r n e t
56
To define how the web feeds are updated, select Options > Settings > Web feeds.
Widgets
Your device supports widgets. Widgets are small, downloadable web applications
that deliver multimedia, news feeds, and other information, such as weather
reports, to your device. Installed widgets appear as separate applications in the
Applications > My own folder.
You can download widgets using the Download! application or from the web.
The default access point for widgets is the same as in the web browser. When
active in the background, some widgets may update information automatically to
your device.
Using widgets may involve the transmission of large amounts of data through
your service provider's network. Contact your service provider for information
about data transmission charges.
Saved pages
To save a page while browsing to be able to view it offline, select Options >
Tools > Save page.
To view saved pages, in the bookmarks view, select Saved pages. To open a page,
select it.
Clear privacy data
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed are stored in the cache. To
empty the cache, select Options > Clear privacy data > Cache.
To clear all privacy data, select Options > Clear privacy data > All.
■ Search
Use Search to get access to search engines, and find and connect to local services,
websites, images, and mobile content (network service). For example, you can use
the application to find local restaurants and shops. You can also search for data in
your device and memory card.
Select > Internet > Search.
I n t e r n e t
57
12. Personalisation
■ Themes
To change the look of your device display, activate a theme.
Select > Settings > Personalis. > Themes. To see a list of the available themes,
select General. The active theme is indicated by a check mark.
To preview a theme, scroll to the theme, and select Options > Preview. To activate
the previewed theme, select Set.
In Themes, you can also set the menu view type, set a theme for the standby mode,
set a custom wallpaper, personalise the look of the power saver, and select an
image shown during a call.
■ Profiles
In Profiles, you can adjust and personalise the device tones for different events,
environments, or caller groups. You can see the selected profile at the top of the
display in the standby mode. If the General profile is in use, only the current date
is shown.
Select > Settings > Profiles.
To activate the profile, select the profile and Activate.
Tip: To quickly change to silent profile from any other profile, in the
standby mode, press and hold #.
To personalise a profile, select the profile, Personalise, and the desired settings.
To set the profile to be active until a certain time within the next 24 hours, select
Timed and the time.
See also ‘Offline profile,’ p. 14.
13. Time management
■ Clock
Select > Office > Clock. To change the clock settings, and to set the time and
date, select Options > Settings.
o set the device to show the time in other locations, scroll right to World clock.
To add a location, select Options > Add location.
P e r s o n a l i s a t i o n
58
To set your current location, scroll to a location, and select Options > Set as
current location. The location is displayed in the clock main view, and the time in
your device is changed according to the location selected. Check that the time is
correct and matches your time zone.
Alarm clock
To set a new alarm, scroll right to Alarms, and select Options > New alarm. Enter
the alarm time, select whether and when the alarm is repeated, and select Done.
■ Calendar
Select > Office > Calendar. Press # in month, week, or day views to
automatically highlight the current date.
To add a new calendar entry, select Options > New entry and an entry type.
Anniversary entries are repeated every year. To-do entries help you to keep a list of
tasks that you need to do. Fill in the fields, and select Done.
14. Office applications
■ Active notes
Active notes allows you to create, edit, and view different kinds of notes. You can
insert images and videos or sound clips in the notes, link notes to other
applications, such as Contacts, and send notes to others.
Select > Office > Active notes.
To create a note, start writing. To insert images, sound or video clips, business
cards, web bookmarks, or files, select Options > Insert object and the type of item.
To set the device to show a note when making or receiving a call from a contact,
select Options > Settings. To link a note to a contact, select Options > Link note
to call > Add contacts and the contact.
■ Notes
Select > Office > Notes.
To write a new note, start writing. To save the note, select Done.
You can save plain text files (.txt format) you receive to Notes.
O f f i c e a p p l i c a t i o n s
59
■ Calculator
Select > Office > Calculator. When entering numbers, to add a decimal point,
press #.
Note: This calculator has limited accuracy and is designed for simple calculations.
■ Converter
Select > Office > Converter. You can convert measurements such as length
from one unit to another, for example, yards to metres.
The converter has limited accuracy and rounding errors may occur.
Before you can convert currency, you need to choose a base currency (usually your
domestic currency) and add exchange rates. The rate of the base currency is
always 1. Select Currency as the measurement type, and select Options >
Currency rates. To change the base currency, scroll to the currency, and select
Options > Set as base currency. To add exchange rates, scroll to the currency, and
enter a new rate.
After you insert all the required exchange rates, you can convert currency. In the
first amount field, enter the value to be converted. The other amount field
changes automatically.
Note: When you change base currency, you must enter new exchange rates
because all previously set exchange rates are cleared.
■ Mobile dictionary
Use Dictionary to translate words from one language to another.
Select > Office > Dictionary. English is available by default in your device. You
can add two more languages. To add a language, select Options > Languages >
Download languages. You can remove languages except English and add new
ones. The languages are free of charge, but downloading may involve the
transmission of large amounts of data through your service provider's network.
Contact your service provider for information about data transmission charges.
The display shows abbreviations for source and target languages. To change the
source and target language, select Options > Languages > Source and Target.
Enter the word to be translated, and select Translate. To hear the word spoken,
select Listen.
O f f i c e a p p l i c a t i o n s
60
■ Adobe Reader
Use Adobe Reader to view portable document format (.pdf) documents. To open
the application, select > Office > Adobe PDF.
Open a .pdf file
To open a recently viewed document, select it. To open a document that is not
listed in the main view, select Options > Browse for file, the memory and folder
where the file is stored and the file.
View a document
To move around within a page, scroll. To move to the next page, scroll down at the
bottom of the page.
To zoom in or out, select Options > Zoom > In or Out.
To find text, select Options > Find > Text, and enter the text you want to find.
To find the next occurrence, select Options > Find > Next.
To save a copy of the document, select Options > Save.
Settings
Select Options > Settings and from the following:
Default zoom % — to set the default zoom when opening a .pdf file for viewing
View mode > Full screen — to open documents in full screen mode
Save settings on exit > Yes — to save the settings as default when you exit
Adobe Reader
■ Quickoffice
To use the Quickoffice applications, select > Office > Quickoffice.
To view a list of Word, Excel, and PowerPoint documents, scroll right or left to
the Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft
Word documents are listed in the Quickword view. Not all variations or features
of Word, Excel, and PowerPoint file formats are supported.
To open a file in its respective application, select it.
If you experience problems with the Quickoffice applications, visit
O f f i c e a p p l i c a t i o n s
61
Quickmanager
With Quickmanager, you can download software, including updates, upgrades,
and other useful applications. You can pay for the downloads in your phone bill
or using a credit card.
15. Settings
■ Voice commands
To select the functions to use by voice command, select > Settings > Voice
comm.. The voice commands for changing profiles are in the Profiles folder.
To change the voice command for an application, select Options > Change
command and the application. To play the activated voice command, select
Options > Playback.
To use voice commands, see ‘Voice dialling,’ p. 20.
■ Phone settings
General
Select > Settings > Phone sett. > General and from the following:
Personalisation — to adjust the display, standby mode, tones (such as ringing
tone), language, themes, and voice command settings
Date and time — to set the time and date and the display format
Enhancement — to change the settings for an enhancement. Select an
enhancement and the desired setting.
My own key — to change a shortcut for the my own key. See ‘Standby mode,’ p. 13.
Security — to change the device and SIM card settings, such as PIN and lock
codes; view certificate details and check authenticity; and view and edit
security modules
When security features that restrict calls are in use (such as call barring, closed user group,
and fixed dialing), calls may be possible to the official emergency number programmed into
your device.
S e t t i n g s
62
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used
correctly in order to benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security to be available.
Certificates have a restricted lifetime. If “Expired certificate” or “Certificate not
valid yet” is shown, even if the certificate should be valid, check that the current
date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust the owner
of the certificate and that the certificate really belongs to the listed owner.
Factory settings — to reset some of the settings to their original values. You need
the lock code.
Positioning (network service) — to change positioning settings. See ‘Positioning
settings,’ p. 26.
Phone
See ‘Call settings,’ p. 22.
Connection
Select > Settings > Phone sett. > Connection and from the following:
Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth
settings. See ‘Bluetooth connection settings,’ p. 70.
USB — to edit USB settings. See ‘USB connection,’ p. 71.
Destinations — to define the connection methods used for reaching a particular
destination
Packet data — to select the packet data connection settings. The packet data
settings affect all access points using a packet data connection.
• To set the device to register to the packet data network when you are in a
network that supports packet data, select Packet data connection > When
available. If you select When needed, the device uses a packet data
connection only if you start an application or function that needs it.
• To set the access point name to use your device as a modem with your
computer, select Access point.
• To enable the use of HSDPA (network service) in UMTS networks, select
High speed packet access. When HSDPA support is activated, downloading
data such as messages, e-mail, and browser pages through the cellular
network may be faster.
S e t t i n g s
63
Data call — to set the online time for the data call connection. The data call
settings affect all access points that use a GSM data call.
Video sharing — to set your SIP profile settings manually. See ‘Video sharing
settings,’ p. 24.
Presence (network service) — to view and edit the presence settings. Connection
applications, such as push to talk, use the presence settings. You may receive the
settings from your service provider.
SIP settings — to view and edit session initiation protocol (SIP) profiles. See ‘Video
sharing,’ p. 23.
XDM porfile — to create or edit an XDM profile. Settings are for communication
applications, such as presence and push to talk. These enable the service provider
to access some user information that is saved in the network servers but managed
by the user, for example push to talk groups. You may receive the settings from
your service provider. See ‘Configuration settings,’ p. 11.
Configurations — to view and delete configuration contexts. Certain functions,
such as web browsing and multimedia messaging, may require configuration
settings. You may receive the settings from your service provider. See
‘Configuration settings,’ p. 11.
APN control — to restrict the use of packet data access points. This setting is only
available if your SIM card supports the service. To change the settings, you need
the PIN2 code.
Applications
To view and edit settings of applications installed to your device, select
>
Settings > Phone sett. > Applications.
■ Speech
In Speech, you can select the default language and voice used for reading text
messages and adjust the voice properties, such as rate and volume. Select
>
Settings > Speech.
To view details of a voice, scroll right, scroll to the voice, and select Options >
Voice details. To test a voice, scroll to the voice, and select Options > Play voice.
S e t t i n g s
64
16. Data management
■ Install or remove applications
You can install two types of applications to your device:
• J2METM applications based on JavaTM technology with the extension .jad or .jar.
PersonalJavaTM applications cannot be installed on your device.
• Other applications and software suitable for the Symbian operating system.
The installation files have the .sis or .sisx extension. Only install software
specifically designed for your device.
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the
Java VerifiedTM testing.
Installation files may be transferred to your device from a compatible computer,
downloaded during browsing, or sent to you in a multimedia message, as an
e-mail attachment or by using Bluetooth technology. You can use Nokia
Application Installer in Nokia PC Suite to install an application to your device
or a memory card.
To find installed applications, select > Applications > My own.
To open Application manager, select > Settings > Data mgr. > App. mgr..
Install an application
The .jar file is required for installing Java applications. If it is missing, the device
may ask you to download it.
1. To install an application or software package, select Installation files, and
scroll to an installation file. Applications on the memory card are indicated
with
.
2. Select Options > Install.
Alternatively, search the device memory or the memory card, select the
application, and press the scroll key to start the installation.
During the installation, the device shows information about the progress of the
installation. If you are installing an application without a digital signature or
certification, the device displays a warning. Continue installation only if you
are sure of the origins and contents of the application.
Java applications may attempt to, for example, establish a data connection or
send a message. To edit the permissions of an installed Java application and define
D a t a m a n a g e m e n t
65
which access point the application will use, select Installed apps., scroll to the
application, and select Open.
After you install applications to a compatible memory card, installation files (.sis) remain in
the device memory. The files may use large amounts of memory and prevent you from
storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation
files to a compatible PC, then use the file manager to remove the installation files from the
device memory. See ‘File manager,’ p. 66. If the .sis file is a message attachment, delete the
message from the Messaging inbox.
Remove an application
In the Application manager main view, select Installed apps., scroll to the software
package, and select Options > Uninstall.
■ File manager
To browse, open, and manage files and folders in the device memory or on a
memory card, select > Settings > Data mgr. > File mgr..
Back up and restore device memory
To back up information from device memory to the memory card or restore
information from the memory card, in File manager, select Options > Back up
phone memory or Restore from mem. card. You can only back up the device
memory and restore it to the same device.
Format a memory card
When a memory card is formatted, all data on the card is permanently lost.
Some memory cards are supplied preformatted and others require formatting.
1. In the File manager view, select the memory card.
2. Select Options > Memory card options > Format.
3. When formatting is complete, enter a name for the memory card.
Lock or unlock a memory card
To set a password to help prevent unauthorised use, in the File manager view,
select the memory card and Options > Memory card password > Set. Enter and
confirm your password. The password can be up to eight characters long.
If you insert another password-protected memory card into your device, you are
prompted to enter the password of the card. To unlock the card, select Options >
Unlock memory card.
D a t a m a n a g e m e n t
66
■ Licences
Digital rights management
Content owners may use different types of digital rights management (DRM) technologies
to protect their intellectual property, including copyrights. This device uses various types of
DRM software to access DRM-protected content. With this device you can access content
protected with WMDRM, OMA DRM 1.0, and OMA DRM 2.0. If certain DRM software fails
to protect the content, content owners may ask that such DRM software's ability to access
new DRM-protected content be revoked. Revocation may also prevent renewal of such
DRM-protected content already in your device. Revocation of such DRM software does
not affect the use of content protected with other types of DRM or the use of non-DRM-
protected content.
Digital rights management (DRM) protected content comes with an associated activation
key that defines your rights to use the content.
If your device has OMA DRM-protected content, to back up both the licences and the
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer
the licences which need to be restored with the content for you to be able to continue the
use of OMA DRM protected content after the device memory is formatted. You may also
need to restore the licences in case the files on your device get corrupted.
If your device has WMDRM protected content, both the licences and the content will be lost
if the device memory is formatted. You may also lose the licences and the content if the files
on your device get corrupted. Losing the licences or the content may limit your ability to use
the same content on your device again. For more information, contact your service provider.
Some licences may be connected to a specific SIM card, and the protected content can be
accessed only if the SIM card is inserted in the device.
To view the licences saved in your device, select > Settings > Data mgr. >
Licences.
To view valid licences that are connected to one or more media files, select Valid
licences. Group licences, which contain several licences, are indicated with
.
To view the licences contained in the group licence, select the group licence.
To view invalid licences for which the time period for using the file has exceeded,
select Invalid licences. To buy more usage time or extend the usage period for a
media file, select an invalid licence and Options > Get new licence. It may not be
possible to update licences if service message reception is disabled.
To view licences that are not in use, select Not in use. Unused licenses have no
media files connected to them.
To view detailed information such as the validity status and the ability to send the
file, scroll to a licence, and select it.
D a t a m a n a g e m e n t
67
■ Device manager
With device manager you can connect to a server and receive configuration
settings for your device, create new server profiles, or view and manage existing
server profiles. You may receive configuration settings from your service provider
or company information management department.
To open the device manager, select > Settings > Data mgr. > Device mgr..
Update software
Warning: If you install a software update, you cannot use the device, even to make
emergency calls, until the installation is completed and the device is restarted. Be
sure to back up data before accepting installation of an update.
Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information about
data transmission charges.
Make sure that the device battery has enough power, or connect the charger before starting
the update.
1. Select Options > Check for updates. If an update is available, accept to
download it.
2. After a successful download, to install the update, select Now. To start the
installation later, select Later.
To start the installation process later, select Options > Install update.
If no server profile has been defined, the device asks you to create one, or if there
are several, to select from a list of servers. Contact your service provider for server
profile settings.
Configure your device
You may receive configuration settings from your service provider or company
information management department.
To connect to a server and receive configuration settings for your device, select
Options > Server profiles, scroll to the server profile, and select Options > Start
configuration.
To edit a server profile, scroll to the profile, and select Options > Edit profile.
Contact your service provider or company information management department
for the server profile settings.
D a t a m a n a g e m e n t
68
17. Connectivity
■ Data transfer
With data transfer you can copy or synchronise contacts, calendar entries, and
possibly other data, such as video clips and images, from a compatible device
using a Bluetooth connection.
Depending on the other device, synchronisation may not be possible and data can
be copied only once.
1. To transfer or synchronise data, select > Settings > Connectivity > Switch.
If you have not used Switch before, information about the application is
displayed. To start transferring data, select Continue.
If you have used Switch, select the icon Start sync, Start retrieving or
Start sending.
2. When using Bluetooth technology, the devices need to be paired in order to
transfer data.
Depending on the type of the other device, an application may be sent and
installed on the other device to enable the data transfer. Follow the
instructions.
3. Select what content you want to be transferred to your device.
4. Content is transferred to your device. The transfer time depends on the amount
of data. You can stop the transfer and continue later.
■ PC Suite
With PC Suite you can synchronise contacts, calendar entries, and notes between
your device and a compatible PC.
You may find more information about PC Suite and the download link in the
■ Bluetooth connectivity
Bluetooth wireless technology enables wireless connections between electronic
devices within a maximum range of 10 metres (33 feet).
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:
Advanced Audio Distribution, Audio/Video Remote Control, Basic Imaging, Device
Identification, Dial-Up Networking, File Transfer, Hands-free, Headset, Object Push, Serial
Port, SIM Access, Phone Book Access, Generic Audio/Video Distribution, Generic Access, and
Generic Object Exchange. To ensure interoperability between other devices supporting
C o n n e c t i v i t y
69
Bluetooth technology, use Nokia approved enhancements for this model. Check with the
manufacturers of other devices to determine their compatibility with this device.
Features using Bluetooth technology increase the demand on battery power and reduce
the battery life.
Do not accept Bluetooth connections from sources you do not trust.
A Bluetooth connection is disconnected automatically after sending or
receiving data.
Bluetooth connection settings
Select > Settings > Connectivity > Bluetooth.
Bluetooth — to switch Bluetooth connectivity on or off
My phone's visibility > Shown to all — to allow your device to be found by other
devices with Bluetooth connectivity at all times. To allow your device to be found
for a defined time period, select Define period. For security reasons it is advisable
to use the Hidden setting whenever possible.
My phone's name — to define a name for your device
Remote SIM mode > On — to enable another device, for example, a car kit, to use
the SIM card of your device using Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.
Send data
1. Open the application where the item you want to send is saved.
2. Scroll to the item you want to send, and select Options > Send >
Via Bluetooth.
3. The device starts to search for devices within range. Paired devices are shown
with . Some devices may show only the unique device addresses. To find
out the unique address of your device, enter the code *#2820# in the standby
mode.
If you have searched for devices earlier, a list of devices found previously is
shown. To start a new search, select More devices.
4. Select the device with which you want to connect.
C o n n e c t i v i t y
70
5. If the other device requires pairing before data can be transmitted, a tone
sounds and you are asked to enter a passcode. Create your own passcode and
share the passcode with the owner of the other device. You do not have to
memorise the passcode.
Pair and block devices
To open a list of paired devices, in the Bluetooth view, scroll right to Paired devices.
To pair with a device, select Options > New paired device, select the device with
which to pair, and exchange passcodes.
To cancel pairing, scroll to the device whose pairing you want to cancel, and press
the clear key. If you want to cancel all pairings, select Options > Delete all.
To set a device to be authorised, scroll to the device, and select Options > Set as
authorised. Connections between your device and an authorised device can be
made without your knowledge. Use this status only for your own devices to which
others do not have access, for example, your PC or devices that belong to someone
you trust. is added next to authorised devices in the paired devices view.
To block connections from a device, in the paired devices view, select the device
and Block.
To view a list of blocked devices, scroll right to Blocked devices. To unblock a
device, scroll to the device, and select Delete.
Receive data
When you receive data using Bluetooth technology, you are asked if you want to
accept the message. If you accept, the item is placed in inbox in Messaging.
■ USB connection
Connect the USB data cable to establish a data connection between the device
and a compatible PC.
Select > Settings > Connectivity > USB and from the following:
USB connection mode — to select the default USB connection mode or change the
active mode. Select PC Suite to use the device with Nokia PC Suite; Mass storage
to access files on the inserted memory card as a mass storage device; Image
transfer to use the device with a PictBridge-compatible printer, or Media transfer
to synchronise media files, such as music, with a compatible version of Windows
Media Player.
C o n n e c t i v i t y
71
Ask on connection — to set the device to ask the purpose of the connection each
time the cable is connected, select Yes. To set the default mode to be activated
automatically, select No.
After transferring data, ensure that it is safe to unplug the USB data cable from
the PC.
■ Remote synchronisation
Sync enables you to synchronise data such as your calendar entries, contacts, and
notes with a compatible computer or a remote internet server.
Select > Settings > Connectivity > Sync.
To create a new profile, select Options > New sync profile and enter the required
settings.
To synchronise data, in the main view, mark the data to be synchronised, and
select Options > Synchronise.
■ Push to talk
Push to talk (PTT, network service) is a real-time voice over IP service (network
service). PTT provides direct voice communication connected with a single
keypress. In PTT communication, one person talks while the others listen. The
length of time of each turn is limited.
To check availability and costs, and to subscribe to the service, contact your
service provider. Note that roaming services may be more limited than home
network services.
Before you can use the PTT service, you must define the PTT connection settings.
For PTT service settings, contact your service provider.
Phone calls always take priority over PTT calls.
Select > Applications > PTT.
Log in to PTT
To log in manually, select Options > Log in to PTT.
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Options > Exit. Log out from PTT after exiting application? is displayed. To
log out, select Yes. To keep PTT active in the background, select No.
C o n n e c t i v i t y
72
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
1. Select Options > PTT contacts > Contacts, scroll to the contact you want to
talk to, and press the call key.
2. When the connection has been established, to talk to the other participant,
press and hold the call key while you talk.
3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select
Options > Disconnect.
Make a PTT group call
To call a group, select Options > PTT contacts > Contacts > Options > Talk to
many, mark the contacts you want to call, and select OK.
PTT sessions
PTT sessions are displayed as call bubbles in the PTT display, giving information
about the status of the PTT sessions:
Wait — shown when you press and hold the call key and somebody else is still
speaking in the PTT session
Talk — shown when you press and hold the call key and get the permission
to speak
Send a callback request
To send a callback request from Contacts, scroll to a contact, and select Options >
Send callback request.
■ Connection manager
In the connection manager, you can identify the status of data connections, view
details on the amount of data sent and received, and end unused connections.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Select > Settings > Conn. mgr..
To view connection details, scroll to a connection, and select Options > Details.
To end a connection, scroll to the connection, and select Options > Disconnect.
To end all connections, select Options > Disconnect all.
C o n n e c t i v i t y
73
18. Enhancements
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
19. Battery and charger information
Your device is powered by a rechargeable battery. The battery intended for use with this
device is BP-5M. This device is intended for use when supplied with power from the
following chargers: AC-3, AC-4, AC-5 or DC-4 chargers and CA-44 charging adapter. The
battery can be charged and discharged hundreds of times, but it will eventually wear out.
When the talk and standby times are noticeably shorter than normal, replace the battery.
Use only Nokia approved batteries, and recharge your battery only with Nokia approved
chargers designated for this device. Use of an unapproved battery or charger may present a
risk of fire, explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger, then disconnect and reconnect it to
begin charging the battery. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
Always switch the device off and disconnect the charger before removing the battery.
Unplug the charger from the electrical plug and the device when not in use. Do not leave a
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery performance is particularly limited in
temperatures well below freezing.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative
(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,
for example, when you carry a spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when possible.
Do not dispose as household waste.
E n h a n c e m e n t s
74
Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In
the event of a battery leak, do not allow the liquid to come in contact with the skin or
eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek
medical help.
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse
or expose it to water or other liquids.
Improper battery use may result in a fire, explosion, or other hazard. If the device or battery
is dropped, especially on a hard surface, and you believe the battery has been damaged, take
it to a service centre for inspection before continuing to use it.
Use the battery only for its intended purpose. Never use any charger or battery that is
damaged. Keep your battery out of the reach of small children.
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original
Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label
using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of the battery.
If you have any reason to believe that your battery is not an authentic, original Nokia
battery, you should refrain from using it, and take it to the nearest authorised Nokia service
point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be verified, return the battery to the place
of purchase.
Authenticate hologram
1. When you look at the hologram on the label, you should see the
Nokia connecting hands symbol from one angle and the Nokia
Original Enhancements logo when looking from another angle.
2. When you angle the hologram left, right, down and up, you
should see 1, 2, 3 and 4 dots on each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic
Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service
point or dealer for assistance. The use of a battery that is not approved by the manufacturer
B a t t e r y a n d c h a r g e r i n f o r m a t i o n
75
may be dangerous and may result in poor performance and damage to your device and its
enhancements. It may also invalidate any approval or warranty applying to the device.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with
care. The following suggestions will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery, and allow the device to dry completely before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and
light sensor lenses.
•
Use only the supplied or an approved replacement antenna. Unauthorised antennas,
modifications, or attachments could damage the device and may violate regulations
governing radio devices.
•
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such as contacts and calendar notes.
To reset the device from time to time for optimum performance, power off the device
and remove the battery.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any
device is not working properly, take it to the nearest authorised service facility for service.
C a r e a n d m a i n t e n a n c e
76
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that all electrical and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their working life. This
requirement applies to the European Union and other locations where separate
collection systems are available. Do not dispose of these products as unsorted
municipal waste.
By returning the products to collection you help prevent uncontrolled waste disposal
and promote the reuse of material resources. More detailed information is available
from the product retailer, local waste authorities, national producer responsibility
organizations, or your local Nokia representative. For the product Eco-Declaration or
instructions for returning your obsolete product, go to country-specific information
Additional safety information
■ Small children
Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
■ Operating environment
This device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimetres (7/8 inches) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain
metal and should position the device the above-stated distance from your body.
To transmit data files or messages, this device requires a quality connection to the network.
In some cases, transmission of data files or messages may be delayed until such a
connection is available. Ensure the above separation distance instructions are followed until
the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic storage media near the device, because information
stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF energy.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
77
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimetres (6 inches) should be maintained between a wireless device and an
implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to
avoid potential interference with the medical device. Persons who have such devices should:
•
Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical
device when the wireless device is turned on.
•
•
Not carry the wireless device in a breast pocket.
Hold the wireless device to the ear opposite the medical device to minimise the potential
for interference.
•
Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
•
Read and follow the directions from the manufacturer of their implanted medical device.
If you have any questions about using your wireless device with an implanted medical
device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference occurs,
consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag systems. For more
information, check with the manufacturer, or its representative, of your vehicle or any
equipment that has been added.
Only qualified personnel should service the device or install the device in a vehicle. Faulty
installation or service may be dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with great force. Do not place objects,
including installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
78
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey
all signs and instructions. Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling
points such as near gas pumps at service stations. Observe restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas
(such as propane or butane) to determine if this device can be safely used in their vicinity.
■ Emergency calls
Important: This device operates using radio signals, wireless networks, landline
networks, and user-programmed functions. If your device supports voice calls over
the internet (internet calls), activate both the internet calls and the cellular phone.
The device will attempt to make emergency calls over both the cellular networks
and through your internet call provider if both are activated. Connections in all
conditions cannot be guaranteed. You should never rely solely on any wireless
device for essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength. Depending on
your device, you may also need to complete the following:
•
•
•
Insert a SIM card if your device uses one.
Remove certain call restrictions you have activated in your device.
Change your profile from offline or flight profile mode to an active profile.
2. Press the end key as many times as needed to clear the display and ready the device for
calls.
3. Enter the official emergency number for your present location. Emergency numbers vary
by location.
4. Press the call key.
When making an emergency call, give all the necessary information as accurately as
possible. Your wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines
A d d i t i o n a l s a f e t y i n f o r m a t i o n
79
were developed by the independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as
the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is
2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting at its highest certified
power level in all tested frequency bands. The actual SAR level of an operating device can be
below the maximum value because the device is designed to use only the power required to
reach the network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP guidelines
for use of the device at the ear is 1.08 W/kg.
Use of device accessories and enhancements may result in different SAR values. SAR values
may vary depending on national reporting and testing requirements and the network band.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
80
Index
A
D
A-GPS
data cable. See USB.
data transfer 69
assisted GPS 25
alarm clock. See clock.
device manager 68
dictionary. See mobile dictionary.
diverting calls 22
B
barring password 17
Bluetooth
E
connection settings 70
receiving data 71
sending data 70
bookmarks 55
F
file manager 66
forwarding calls. See diverting calls.
C
cache 57
G
calendar 59
gallery 39
call register. See log.
calls
GPS
GPS connection 25
answering 20
barring 23
positioning 25
ending 19
international 19
making 19
H
rejecting 20
help 8
speed dial 19
waiting 21
I
camera
capturing images 43
flash 44
indicators
GPS light 15
icons 14
recording video 46
scenes 46
status light 15
self-timer 44
sequence mode 46
still image camera settings 47
video recorder settings 48
charging battery 10
clock 58, 59
K
keyguard. See keypad lock.
keypad lock 16
conference call 20
connection manager 73
connectivity 69
contacts 38
L
listening to music 49
lock code 10, 16
log 25
memory consumption 38
converter 60
81
M
S
maps
screen saver 15
service commands 37
browsing maps 27
media player. See RealPlayer.
memory card. See microSD card.
menu 15
connection 63
data call 64
messages
messaging 37
listening to 37
packet data 63
service messages 35
SIM messages 37
microSD card 9
mobile dictionary 60
music player
speech 64
writing language 33
sharing online 42
switch. See data transfer.
downloading music 50
music shop 50
playlists 49
transferring music 50
N
T
notes 59
active notes 59
themes 58
O
offline mode. See offline profile.
offline profile 14
U
updating software 68
UPIN 17
one-touch dial. See speed dialling.
operator selection 23
USB 71
using phone without a SIM card 14
P
V
paired devices 71
phonebook. See contacts.
PIN 10, 17
video call 21
video sharing 23
voice commands 62
voice dialing 20
voice mailbox 19
voice recorder. See recorder.
volume 16
module PIN 17
signing PIN 17
positioning 25
profiles 58
PTT. See push to talk.
PUK 17
push to talk 72
W
web
R
connection security 55
feeds 56
radio 53
RealPlayer 54
recorder 54
saving a page 57
viewing a saved page 57
viewing bookmarks 55
writing text. See text input.
ringing tones 39
video ringing tones 40
82
|