Patriot Products Electric Motors User Manual

The New Performance Standard.  
OWNERS & OPERATORS  
M A N U A L  
F O R M O D E L S W I T H  
E L E C T R I C M O T O R S  
page 19  
ILLUSTRATED PARTS LIST: ‘95 PATRIOT ELECTRIC 2HP  
The “Illus. #” refers to the numbered parts in the illustrations. Use the “Order #” and the “Description” when  
ordering. “Qty. refers to the total number of each part the machine is built with. Items without an “Illustration #”  
are available but not shown in the drawings.  
Illus. # Order #  
Description  
Qty.  
Illus. # Order #  
Description  
Qty.  
1
2
3
4
5
82515-000-2 1.5 HP ELECTRIC MOTOR w/ KEY  
30101-019-5 ENGINE MOUNT/AXLE, IRON GRAY  
30201-021-2A GRINDER HOUSING (CALL FACTORY)  
30800-079-2 ROTOR w/ 3/4” BORE, 3/16” KEY WAY 1  
10300-903-5 Y HAMMERS  
1
1
1
42  
44  
45  
46  
80007-044-5 CAUTION DECAL  
1
80007-045-5 SERIAL NUMBER TAG (CALL FACTORY) 1  
80007-083-2 1/2” SIZE LIMIT DECAL  
11101-080-2 MOTOR SUPRT. BRACKET, IRON GRAY 1  
1
6
6
7
8
9
10  
20400-904-5 ELECTRIC MODEL HAMMER SHAFT  
21100-907-5 SPACER A (short, plain)  
21100-905-5 SPACER B (short w/ hole)  
21100-935-5 SPACER C (long w/ hole)  
81000-901-2 ELECTRIC CHIPPER KNIFE  
4
2
2
2
1
Convenient kits and accessories also available...  
99005-004-5 VACUUM KIT (see page 8)  
30800-079-2A ROTOR, ASSEMBLED w/ HAMMERS  
& KNIFE, compact frame  
99309-003-5 Y-HAMMER KIT w/ shafts, hardware  
99000-001-2 ELEC. CHIPPER KNIFE KIT w/ hardware 1  
1
1
1
11  
12  
13  
14  
15  
30301-023-2 CENTER PLATE, COMPACT, IRON GRAY 1  
30201-025-2 FAN HOUSING, COMPACT, IRON GRAY 1  
61201-027-2 LEG, COMPACT FRAME, IRON GRAY  
40001-055-5 CHIPPER CONE CASTING, IRON GRAY 1  
50003-051-5A SHREDDER HOPPER, BLUE  
1
99001-039-5 DEFLECTOR KIT, IRON GRAY  
99000-045-5 HOPPERS HARDWARE KIT  
99000-000-5 HARDWARE KIT, complete unit  
99004-000-5 WHEELS KIT w/ PUSH NUTS  
70305-000-5 ALLEN WRENCH, 3/16”  
1
1
1
1
1
1
16  
17  
18  
19  
20  
11301-039-5A DISCHARGE DEFLECTOR, IRON GRAY  
50003-037-5A CHIPPER CONE, BLUE  
11405-034-5 HOPPER GUARD  
70006-040-5 COLLECTION BAG, 24” x 36”  
70904-000-5 12” WHEEL, SILVER  
1
1
1
1
2
92000-000-5C ASSEMBLY HARDWARE BAG,  
for assembly out of the box  
70000-000-5 SAFETY GOGGLES  
99007-000-5 WARNING/CAUTION DECALS KIT  
80007-042-5 PATRIOT BRAND DECAL  
1
1
1
1
21  
22  
23  
25  
70800-000-5 BEARING, 1” BORE & LOCK COLLAR  
1
73070-000-2 BTN. HD. SOCK. CAP SCRW. 3/8-16x3/4” 4  
70552-000-5 HEX HEAD CAP SCREW, 5/16-18 x 3/4” 3  
70572-000-5 BUTTON HEAD SOCKET CAP  
80007-000-2 PATRIOT OPERATOR’S MANUAL,  
ELECTRIC MODELS  
80007-059-5 PATRIOT WARRANTY CARD  
(CALL FACTORY)  
SCREW, 5/16-18 x 1/2”  
7
1
1
26  
70685-000-5 FLAT HEAD SOCKET CAP SCREW,  
5/16-24 x 5/8”  
73150-000-2 HEX HEAD CAP SCREW, 5/16-24 x 5-1/2”  
70562-000-5 LOCK WASHER, 5/16 SPLIT RING  
2
1
2
27  
29  
30  
70532-000-5 SERRATED FLANGE NUT, 5/16-18  
22  
31  
32  
33  
34  
35  
36  
70732-005-L HEX HEAD REVERSIBLE LOCK  
NUT, 1/4”-20  
70772-000-5 BUTTON HEAD SOCKET CAP SCREW,  
1/4-20 x 3/4”  
8
8
8
71062-000-5 1/4” SAE FLATWASHER  
70002-000-5 TRUSS HEAD SELF-TAPPING  
SCREW, #14 x 5/8  
71752-000-5 HEX HEAD CAP SCREW,  
5/16-18 x 3-1/4”  
5
2
1
71022-000-5 LYNCH PIN  
37  
38  
39  
40  
41  
70320-000-5 ROLL PIN, 3/16 x 3/4”  
70310-000-2 KEY, 3/16” SQUARE  
70202-000-5 FLANGETTE, TRIANGULAR  
70992-000-5 PUSH NUT, 5/8”  
4
1
2
2
3
80007-043-5 DANGER DECAL  
page 20  
CAUTION: THE ROTOR WILL  
COAST EVEN AFTER THE  
MOTOR IS OFF. MAKE SURE  
THE ROTOR IS FULLY STOPPED  
AND DISCONNECT THE PLUG  
BEFORE ATTEMPTING ANY  
MAINTENANCE OR SERVICE.  
IF THE ROTOR IS STILL TURN-  
ING, IT MAY CAUSE SERIOUS  
PERSONAL INJURY.  
!
REAR VIEW  
42  
45  
The circled numbers here refer to  
the numbers in the first column  
of the parts list.  
19  
15  
6
44  
3
7
37  
8
1
5
37  
6
37  
5
9
5
5
37  
9
6
5
(When replacing the rotor,  
Part #4 includes the  
hammers, shafts and roll  
pins already installed.  
It is packaged as the  
“Rotor Assembly.”)  
4
7
5
8
Patents pending.  
page 21  
CAUTION: THE ROTOR WILL  
COAST EVEN AFTER THE  
MOTOR IS OFF. MAKE SURE  
THE ROTOR STOPS TURNING,  
THEN DISCONNECT THE PLUG  
FROM THE MOTOR BEFORE  
ATTEMPTING ANY MAIN-  
TENANCE OR CLEAN-OUT  
PROCEDURE. IF THE ROTOR IS  
STILL TURNING, IT MAY CAUSE  
SERIOUS PERSONAL INJURY.  
!
31  
33  
32  
Detail of the shredder hopper.  
Nuts (outside)  
Screws (inside)  
31  
32  
Nut  
31  
33 Washers (inside)  
Washer  
Screw  
33  
Both the shredder hopper and the chipper cone are  
assembled with the same hardware and wrench.  
32  
39  
bearing  
21  
set  
screw  
lock  
collar  
29  
27  
Detail of the outboard bearing assembly.  
The bearing is sealed and does not need  
lubrication.  
30  

Sony Ericsson K500 User Manual
Sony CRX230A User Manual
Siemens BE INSPIRED S56 User Manual
Siemens A35 User Manual
Samsung SGH T746 User Manual
Samsung GT C3010S User Manual
PQI Mr Flash U191 User Manual
Patriot Products 10F CSV User Manual
Pacific Digital RP5430 User Manual
Nokia 810 User Manual