FUNAI ST27S3 User Manual

FUNAI CORPORATION  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:  
Owner’s  
Manual  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from  
the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded  
from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date  
of original retail purchase.  
27 INCH  
COLOR TELEVISION  
LABOR:  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT  
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE  
PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
ST27S3  
FEATURES  
This warranty shall not be extended to any other person or transferee.  
Tinted, Bright Black Matrix Picture Tube  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not  
apply to any the product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does  
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-  
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-  
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or  
damage which results from fire, flood, lightning or other acts of God.  
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.  
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic  
tuning system provides free and easy channel selection, and lets you tune directly to any chan-  
nel using the channel number buttons (0~9 and +100-key) on the remote control.  
On-Screen Function Display.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
Full-Function Remote Control  
Sleep Timer  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-  
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-  
TIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-  
VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED  
SERVICE FACILITY.  
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,  
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.  
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no  
user operation for 15 minutes, the TV will turn itself off automatically.  
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.  
Front / Rear AV Input  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.  
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS  
COSTS WILL BE CHARGED.  
PRECAUTIONS  
IMPORTANT:  
Place your TV in a room with adequate ventilation.  
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT  
VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
Leave enough room for air to circulate around the bottom, top and back of the set.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
The serial number of this product may be found on the back of the TV. No others have the same  
serial number as yours. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft.  
WITHOUT PRIOR NOTICE.  
To locate your nearest FUNAI Authorized Service Center or general service procedure, please  
call 1-800-242-7158 or write to the following:  
FUNAI CORPORATION, INC.  
SERVICE CENTER  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
19900 Van Ness Avenue, Torrance, CA 90501  
Tel :1-800-242-7158  
This Owner’s Manual is made of recycled paper.  
Head Office: 100 North Street, Teterboro, NJ 07608  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE  
0EMN02300  
Printed in Malaysia  
L6604UE * * * * *  
ANTENNA/CABLE CONNECTIONS  
UHF/VHF Rod  
*Some cable TV systems use scram-  
bled signals and require a special con-  
verter to receive these channels.  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
Antenna  
(Not supplied)  
Consult your local cable company.  
VHF  
Antenna  
(Not supplied)  
CATV Box *  
FCC WARNING- This equip-  
ment may generate or use radio  
frequency energy. Changes or  
modifications to this equipment  
may cause harmful interference  
unless the modifications are  
expressly approved in the  
instruction manual. The user  
could lose the authority to oper-  
ate this equipment if an unau-  
thorized change or modification  
is made.  
or Satellite Box  
(Not supplied)  
ATTENTION:  
UHF  
POUR ÉVITER LES CHOC ÉLECTRIQUES,  
INTRODUIRE LA LAME LA PLUS LARGE  
DE LA FICHE DANS LA BORNE CORRE-  
SPONDANTE DE LA PRISE ET POUSSER  
JUSQU’AU FOND.  
Antenna  
(Not supplied)  
ANT.IN  
OUT  
IN  
From Cable System  
or Satellite Antenna  
75-ohm  
Coaxial Cable  
75-ohm  
Coaxial Cable  
ANT. IN  
OR  
OR  
From Cable System  
VHF/UHF Combiner  
(Not supplied)  
Note to CATV system installer:  
AV input (stereo)  
This reminder is provided to call the CATV system installer's attention to Article 820-  
40 of the NEC that provides guidelines for proper grounding and, in particular, speci-  
fies that the cable ground shall be connected to the grounding system of the building  
as close to the point of cable entry as practical.  
VHF/UHF  
Combination Antenna  
(Not supplied)  
CLOSED CAPTION  
This TV can receive C1 and C2 Caption and Text.  
Notes:  
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a  
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or  
text.  
(2)Captions and texts may not match the TV voice exactly.  
(3)Interference may cause the closed caption system not to function properly.  
(4)The caption or text characters will not be displayed while the menu display or functions dis-  
play is shown.  
Caption Mode  
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-  
cast signal contains Caption Signals.  
(2)Paint-on mode: Displays input characters on the screen immediately.  
Pop-on mode: Once characters are stored in memory, they are displayed all at once.  
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)  
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters  
will not be displayed.  
(5)If you see this screen:  
Text Mode  
(1)Displays the text on the screen by scrolling (max. 7 lines)  
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.  
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To  
clear screen, select CAPTION C1, C2 or CAPTION [OFF].  
PREPARATION FOR USE  
PICTURE  
[ADD/DELETE FUNCTION]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
3) Press the VOL(ume) button so that "ADD/DELETE" is selected.  
4) Use the CH(annel) or button to select the channel you wish to put  
into memory or to erase from memory.  
LANGUAGE SELECTION  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
If you want to change the language of the on-screen menu, follow the proce-  
dure below.  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
1) Connect the power cord to a standard AC outlet.  
Note: If some digits appear in the corner of the screen,  
press the POWER button without unplugging the power cord.  
2) Press the POWER button to turn on the TV.  
3) Press the MENU button so that the menu display appears  
on the TV screen.  
4) Press the CH(annel) or button to point to "[ENGLISH]".  
5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using  
the VOL(ume) or button.  
ADD/DELETE  
AUTO MEMO  
STEREO  
[ON]  
Note: The display will return to the normal screen automatically in about  
10 seconds.  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
Perform "ADD/DELETE" function while this display appears on the screen.  
Press the VOL(ume) or button to light up the channel number  
in LIGHT BLUE if you wish to add the channel into memory.  
Press the VOL(ume) or button to light up the channel number  
6) Press the MENU button to exit the menu.  
in LIGHT RED if you wish to erase the channel from memory.  
5) Press the MENU button to exit the menu.  
CHANNEL PRESETTING  
NOTE: You MUST PRESET channels BEFORE using CHANNEL or button.  
To preset a channel or to change a preset channel, follow the procedure below.  
1) Press the POWER button to turn on the TV.  
STEREO SOUND SYSTEM  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
2) Press the MENU button so that the menu display appears  
on the TV screen.  
3) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
This function suppresses noise, restores the dynamic range and electronically  
expands the stereo signal to create a more spacious sound effect.  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
4) Press the CH(annel) or button to point to "AUTO MEMO".  
Then, press the VOL(ume) button.  
2) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
3) Press the CH(annel) or button so that "STEREO" is selected.  
4) Press the VOL(ume) or button to select the stereo mode on or off.  
Stereo sound is effective when "STEREO" is on.  
ADD/DELETE  
AUTO MEMO  
PICTURE  
The tuner scans and memorizes all active channels in your area.  
The TV distinguishes between standard TV channels and cable (CATV)  
STEREO  
[ON]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
channels.  
When AUTO MEMO action is completed, the lowest memorized channel reappears on the  
screen.  
When you press the CH(annel) or button after selecting AUTO MEMO,  
the tuner will stop at the memorized channels only.  
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If  
this happens, try the AUTO MEMO action again when reception conditions are better.  
ADD/DELETE  
AUTO MEMO  
ADD/DELETE  
AUTO MEMO  
STEREO  
[OFF]  
STEREO  
[ON]  
RESUME FUNCTION  
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-  
ly when the power resumes.  
OPERATIONS  
GAME MODE  
In the above steps, the picture adjustment  
display will disappear from the TV screen  
automatically after about 10 seconds if you  
do not press any buttons. Press the MENU  
and VOL(ume) button so that "PIC-  
TURE" is selected. Then, press the  
WATCHING A TV PROGRAM  
Set to the most suitable position for TV  
GAME.  
1) Press the POWER button to turn on the TV.  
2) Select the desired channel with the CH(annel) or button.  
3) Adjust the volume to the desired listening level using the VOL(ume) or button.  
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)  
[+] : ON [-] : OFF  
BRIGHT  
Adjust until the darkest parts of the picture are  
as bright as you prefer.  
[+] : increase brightness [-] : decrease brightness  
CONTRAST  
Adjust to increase or decrease contrast.  
[+] : increase contrast [-] : decrease contrast  
COLOR  
Adjust to be brilliant or pale color.  
CH(annel) or button repeatedly until  
the display returns to the screen.  
If you adjust any picture control after you  
set the Game mode to [ON], the Game mode  
is set to [OFF] automatically.  
SETTING THE SLEEP TIMER  
The sleep timer function allows you to have the power automatically turn off  
after a set time period.  
1) Press the POWER button to turn on the TV and press the SLEEP button  
on the remote control .  
2) You may change the sleep time by pressing the SLEEP  
button on the remote control repeatedly. The timer can be  
[USING THE GAME BUTTON]  
You may also set the Game mode and external  
input mode at the same time by pressing the  
GAME button on the remote control. “GAME”  
appears on the TV screen.  
[+] : be brilliant color [-] : be pale color  
TINT  
SLEEP 10  
Adjust to obtain natural skin tones.  
To exit the Game mode and external input  
[+] : greenish tone [-] : reddish tone  
SHARPNESS  
Adjust to detail in the picture.  
[+]:increase sharpness [-]:decrease sharpness  
set up to 90 minutes, 10 minutes each time the SLEEP  
mode, press the GAME button on the remote  
control again.  
To cancel the sleep timer:  
button is pushed. (The timer display counts up and sleep  
Press the SLEEP button repeated-  
To cancel the Game mode only, adjust the  
timer will be displayed on the screen when you press the  
ly until "SLEEP 0" is displayed.  
picture control. In this case, “VIDEO” instead  
of “GAME” appears on the TV screen.  
SLEEP button on remote control.)  
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the  
sleep time will be lost.  
Notes:  
If you press the GAME button when the TV  
“+” is achieved by pressing the VOL(ume)  
is off, the TV turns on and will be in the  
Game mode and external input mode auto-  
matically.  
button and “-” by pressing the VOL(ume)  
button.  
CLOSED CAPTION SELECTION  
You may view specially labeled (cc) TV pro-  
grams, movies, news, prerecorded tapes, etc.  
with either a dialogue caption or text display  
added to the program.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) or button to point  
to "CAPTION".  
: Press the CH(annel) or button.  
[-]  
OFF  
[+]  
ON  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
3) Press the VOL(ume) or button to select  
the mode you wish.  
GAME MODE  
BRIGHT  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
4) When done, press the MENU button to exit  
the menu.  
: Press the VOL(ume) or button.  
V-CHIP SET UP  
V-CHIP enables parents to prevent their chil-  
dren from watching inappropriate material on  
TV.  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ C1]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ C2]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ T1]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ T2]  
To block certain ratings, follow the steps below.  
Programming may be rated by the Motion  
Picture Association of America (MPAA) or  
according to the Television Parental  
V-CHIP reads the ratings for programming  
(except for news and sports programs, unedited  
movies on premium cable channels, and  
Emergency Broadcast System signals), then  
denies access to programming if the program's  
rating meets or exceeds the limitations you  
select. In this  
Guidelines. In order to block any inappropri-  
ate programming, set your limits in both  
places (MPAA RATING and TV RATING).  
You cannot access the menu when the "PRO-  
TECTED PROGRAM by ..." message  
appears. In this case, change to an unblocked  
channel, then press the MENU button.  
PICTURE ADJUSTMENT  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the VOL(ume) button so that "PICTURE" is selected.  
3) Select the feature you wish to adjust with the CH(annel) or button and adjust it with the  
VOL(ume) or button.  
case, "PROTECTED PROGRAM by ..." mes-  
sage appears on the TV screen.  
OPERATIONS (Continued)  
When you select TV-Y7, TV-PG, TV-14, or  
TV-MA and you press the VOL(ume) but-  
ton, the sub-ratings will appear on the TV  
screen.  
If you select the rating category (example: TV-  
PG) and turn it to [BLOCK] or [VIEW], the  
sub-ratings (example: V for Violence) will turn  
[BLOCK] or [VIEW] automatically.  
You can set the sub-ratings to [BLOCK] or  
[VIEW] individually when the rating category  
is set to [BLOCK]. To set the sub-ratings indi-  
vidually, follow the steps below.  
[MPAA RATING SET UP]  
[TV RATING SET UP]  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) ●  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) ●  
or button to point to  
"V-CHIP SET UP".  
Then, press the  
VOL(ume) button.  
3) Press the CH(annel) ●  
or button to point to  
"TV RATING".  
Then, press the  
VOL(ume) button.  
4) Press the CH(annel) ●  
or button to point to  
PICTURE  
CHANNEL SET  
[ENGLISH] ESPAÑOL  
PICTURE  
CHANNEL SET  
[ENGLISH] ESPAÑOL  
B V-CHIP SET UP  
or button to point to  
"V-CHIP SET UP".  
B V-CHIP SET UP  
CAPTION [OFF]  
CAPTION [OFF]  
Then, press the  
VOL(ume) button.  
3) Press the CH(annel) ●  
or button to point to  
"MPAA RATING".  
TV RATING  
B TV RATING  
MPAA RATING  
B MPAA RATING  
When you select [TV-Y7]:  
Then, press the  
Press the CH(annel) or button to select  
"FV" (Fantasy Violence). Then, press the  
VOL(ume) button to select [BLOCK] or  
[VIEW].  
VOL(ume) button.  
4) Press the CH(annel) ●  
or button to point to  
your desired item.  
Then, press the  
B G  
PG  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
B TV-Y  
TV-Y7(  
TV-G  
TV-PG(  
TV-14(  
TV-MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
)
your desired  
PG-13  
R
NC-17  
X
TV-Y7  
[BLOCK]  
item.Then, press the  
VOL(ume) button to  
select [BLOCK] or  
[VIEW].  
)
)
)
FV  
[BLOCK]  
VOL(ume) button  
to select [BLOCK] or  
[VIEW].  
When you select [TV-PG], [TV-14] or [TV-MA]:  
Press the CH(annel) or button to select  
"D" (Suggestive Dialog), "L"(Coarse  
Language), "S"(Sexual Situation), or "V"  
(Violence).  
<Selection> <Rating Category Explanations>  
<Selection> <Rating Category Explanations>  
• G:  
• PG:  
General Audience  
Parental Guidance suggested.  
• TV-Y:  
• TV-Y7:  
Appropriate for all children  
Appropriate for children seven and  
older  
• PG-13: Unsuitable for children under 13  
• R:  
Restricted; under 17 requires accompany  
ing parent or adult guardian  
• TV-G:  
General Audience  
• TV-PG:  
• TV-14:  
• TV-MA:  
Parental Guidance suggested.  
Unsuitable for children under 14  
Mature audience only  
Then, press the VOL(ume) button to  
select [BLOCK] or [VIEW].  
• NC-17: No one under 17 admitted  
• X: Mature audience only  
TV-PG  
[BLOCK]  
When you select the rating category and turn  
it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rat-  
ing will turn [VIEW] automatically.  
When you select the rating category and turn  
it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rat-  
ing will turn [VIEW] automatically.  
D
L
S
V
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
When you turn "G" to [BLOCK] or [VIEW],  
the all ratings will turn to [BLOCK] or  
[VIEW] automatically.  
When you turn "X" to [VIEW], then all rat-  
ings will turn to [VIEW] automatically.  
When you turn "TV-Y" to [BLOCK] or  
[VIEW], then all ratings will turn to  
[BLOCK] or [VIEW] automatically.  
When you turn "TV-MA" to [VIEW], then  
all ratings will turn to [VIEW] automatically.  
Note: When you select [TV-MA], "D" does  
not appear on the TV screen.  
The sub-ratings which set to [BLOCK]  
appear next to the rating category in the TV  
RATING menu.  
5) Press the MENU button to exit the menu.  
TV-Y  
TV-Y7 (  
TV-G  
[VIEW]  
)[VIEW]  
[BLOCK]  
TV-PG (DLSV)[BLOCK]  
TV-14 (DLSV)[BLOCK]  
TV-MA ( LSV)[BLOCK]  
5) Press the MENU button to exit the menu.  
TROUBLESHOOTING GUIDE  
MAINTENANCE  
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-  
looked possibilities. Before arranging for service, check these items. It could save you time and money.  
CABINET CLEANING  
PICTURE TUBE CLEANING  
Wipe the front panel and other exterior sur-  
faces of the TV with a soft cloth immersed  
in lukewarm water and wrung dry.  
Wipe the picture tube of the TV with a soft  
cloth. Before cleaning the picture tube, discon-  
nect the power cord.  
Never use a solvent or alcohol. Do not spray  
insecticide liquid near the TV. Such chemi-  
cals may cause damage and discoloration to  
the exposed surfaces.  
QUICK SERVICE CHECK LIST  
POSSIBLE REMEDY  
SUPPLIED ACCESSORIES  
Try a new channel, if OK, then possible station trouble.  
Owner’s Manual  
(0EMN02300)  
Remote control unit  
(N0108UD or N0132UD)  
Is TV plugged in?  
Power at outlet?  
Owner’s  
Manual  
Is TV’s POWER button on?  
Is antenna connected to terminal on the back of the set?  
If outside antenna is being used, check for broken wire.  
Check for local interference.  
Batteries ("AA" x 2)  
Turn off with POWER button and then turn it on after about a minute.  
Adjust COLOR control.  
SPECIFICATIONS  
Adjust CONTRAST & BRIGHT control.  
Check batteries in Remote Control.  
Move the TV away from the nearby appliances which have Magnetism.  
Turn off using the POWER button, then turn it on again 30 minutes or so later.  
GENERAL SPECIFICATIONS  
ELECTRICAL SPECIFICATIONS  
Television system:  
NTSC-M  
TV Standard  
Sound output:  
1W, 8 ohm x2  
Closed Caption Problem  
Possible Remedy  
Closed Caption  
System:  
OTHER SPECIFICATIONS  
My TV is showing captions that are  
misspelled.  
You are watching a live broadcast and spelling errors made by the  
closed captioning production company may pass through uncorrect-  
ed. A prerecorded program will not show any misspelled words  
because of the normal time available for editing the captions.  
§15.119/FCC  
Remote control:  
Digital encoded  
Channel coverage  
VHF:  
infrared light system  
2 ~ 13  
Operating  
temperature:  
UHF:  
14 ~ 69  
5°C to 40°C  
(41°F~104°F)  
CATV:  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
181 channel  
frequency synthesized  
tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue  
or there is a delay of what is being said.  
are common for live broadcasts. Most captioning production compa-  
nies can display a dialogue to a maximum of 220 words per minute.  
If a dialogue exceeds that rate, selective editing is used to insure that  
the captions remain up-to-date with the current TV screen dialogue.  
Power requirements: AC120V, 60Hz  
Power consumption  
Tuning System  
Channel access:  
(Maximum):  
Picture tube:  
Dimensions:  
110W  
27"  
My captions are scrambled with white  
boxes on the TV screen.  
Interference caused by building, power lines, thunderstorms, etc.  
may cause scrambled or incomplete captions to appear.  
H : 22-1/16” (560mm)  
W: 26” (660mm)  
D : 19-11/16” (500mm)  
77.2 lbs. (35kg)  
My program guide listed a TV show as  
being closed captioned  
but none of the captions were displayed.  
Broadcasters may at times use a time compression process to the  
actual program so that additional advertising time can be given.  
Since the decoder cannot read the compressed information, captions  
will be lost.  
Weight:  
Terminals  
Antenna input:  
VHF/UHF/CATV  
75 ohm unbalanced  
(F-type)  
•Designs and specifications are subject to  
change without notice and without our  
legal obligation.  
•If there is a discrepancy between languages,  
the default language will be English.  
My prerecorded videotape does not show  
any captions. The tape box mentions it  
being closed captioned.  
The videotape was either an illegal copying or the tape duplicating  
company accidentally left out the captioning signals during the  
copying process.  
Video input:  
Audio input:  
RCA connector x 2  
(1 x Front / 1 x Rear)  
RCA connector x 4  
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION  
channels. [OFF].  
(2 (L/R) x Front / 2 (L/R) x Rear)  
Stereo Sound System  
2 speakers  
As an ENERGY STAR® Partner, our company has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.  

Electrolux 922200 User Manual
Electrolux 922044 User Manual
Cres Cor RO151HUA9 User Manual
Buffalo Technology MiniStation User Manual
Belkin 4 Port USB PCI Card P73473 F5U006 UNV User Manual
Avaya 1165E User Manual
AT T E5926 User Manual
Asus P5GD1 User Manual
Asus Computer Monitor VH226 User Manual
Accton Technology EN2216 1 User Manual