American DJ Copier FC 400 User Manual

R
American DJ  
-
FC 400  
TM  
4 WAY FOOT CONTROLLER  
USER'S MANUAL  
Please read before use  
English  
 
Contents  
Features 1  
General Instructions 2  
1. Overview 3  
1.1 Top Front 3  
1.2 Back View 4  
2. Operation Guide 5  
2.1 Chase Mode 5  
2.1.1 Program Mode 5  
2.1.2 Auto/Music Mode 5  
2.1.3 Speed Mode 6  
2.1.4 Fade Time Mode 6  
2.1.5 Master Dimmer Mode 6  
2.1.6 Scene Mode 7  
2.2 Scene Channel Dimmer Mode 7  
2.3 Full On 7  
2.4 Stand By 8  
2.5 MIDI Operation 8  
2.5.1 MIDI Channel Setting 8  
2.5.2 MIDI Implementation 8  
R
American DJ  
-
FC 400  
4 WAY FOOT CONTROLLER  
TM  
Technical Specifications 9  
Improvement and changes to  
this manual, specifications  
and design, may be made at  
any time without prior notice.  
ALL RIGHTS RESERVED.  
 
Features  
Thank you for purchasing this ADJ product.  
This product features include:  
4 DMX channels  
20 built-in programs with Auto or Music mode  
The chase of programs of fade in or out within 0-60 seconds  
12 scenes under manual control  
Built-in microphone or line in music signals  
Master dimmer over the chase of programs  
Full on & Stand By  
MIDI control over the programs, scenes, Full On and Stand By  
Power failure memory  
Every effort has been made to design dependability, reliability and comfort  
into each unit. New products are being designed constantly to meet the  
needs of both entertainment and the lighting industry. We welcome your  
comments about our product and services.  
It is both a privilege and a pleasure serving you.  
1
 
General Instructions  
Please read through this operating instructions before installing or using  
your new product. After you have finished reading the instructions, put  
them away in a safe place for future reference.  
Safe and Efficient Use  
This product must be earthed.  
Do not make any inflammable liquids, water or metal objects  
enter the unit.  
Take care not to damage the power cord.  
No user serviceable parts inside, do not attempt repairs.  
In the event of a malfunction(burning smell, etc.), immediately  
stop operation, disconnect the power supply plug, and consult  
authorized service personnel.  
To prevent fire or shock hazard, do not expose this product to  
rain or moisture.  
Product Care  
This product is intended for indoor use only.  
Unplug the power plug from the sockets when not using the  
unit for extended period.  
Do not use the unit in places subject to excessive humidity,  
vibration or bumps.  
Place this unit in a stable location.  
Do not dismantle or modify the unit.  
2
 
1. Overview  
1.1 Top Front  
6
7
8
9
R
American DJ  
MODE  
CHASE  
DISPLAY  
FUNCTION  
PROGRAM  
A4  
1
2
3
4
PROGRAM OR AUDIO  
SPEED  
FADE TIME  
UP  
MASTER DIMMER  
SCENE  
STAND BY  
INDICATOR  
DOWN  
MODE  
+
STAND BY  
SEC.  
MIDI CHANNEL  
HOLD  
3
SCENE CHANNEL  
DIMMER  
SE.S  
(SE.S  
SE.S  
)
(PRESS)  
PRESS  
FLASH  
FULL ON  
HOLD  
2
SEC.  
SEC.  
FULL ON SCENE  
STAND BY  
SCENE-12  
-
FC 400  
4 WAY FOOT CONTROLLER  
PRESS  
TM  
STAND BY  
HOLD  
2
MODE  
UP  
DOWN  
FULL ON SCENE  
SCENE  
FLASH  
STAND BY  
1
2
3
4
5
1. Mode Pedal:  
Press to activate the functions of chase, MIDI channel  
and channel dimmer.  
2. Up Pedal:  
Press to advance the selections.  
3. Down Pedal:  
4. Flash Pedal:  
Press to descend the selections.  
Press to activate Flash function. Holding down this  
pedal for two seconds activates full on scene.  
Press to activate Stand by function. Holding down  
this pedal for two seconds activates Scene 12.  
5. Stand By Pedal:  
6. 4-digit Segment Display:Shows the current function state.  
7. 2-digit Segment Display:Shows the reading value of current function.  
8. Channel LEDs:  
9. Stand By LED:  
Shows the current activity of relevant channel.  
Indicates the Stand by function.  
3
 
1. Overview  
1.2 Back View  
AUDIO IN  
MIDI  
DMX OUTPUT  
1=Ground  
2=Data+  
3=Data-  
1=Ground  
2=Data-  
3=Data+  
POWER INPUT  
AC 120V~ 60Hz, 0.35A  
POWER  
CAUTION  
RISK OF ELECTRIC SHOCK  
DISCONNECT INPUT POWER  
BEFORE OPENING  
Polarity Select  
3
0.1V~1Vpp  
1/4" mono jack  
N'OUVREZ PAS..RISQUE DE CHOCELECTRIQUE  
WARNING: THIS APPARATUS MUST BE EARTHED  
OUT  
IN  
THRU  
1
2
Fuse: F0.315A 5x20mm (internal).  
1
2
3
4
5
6
1. Power Input:  
2. Power Switch:  
3. Audio Input:  
AC 120V~60Hz, 0.35A.  
This switch turns the main power on or off.  
This 1/4" mono jack accepts a line input music  
signals within 0.1V-1Vpp.  
4. MIDI In/Out/Thru:  
5. DMX Output:  
MIDI ports for connection to a sequencer or  
MIDI device.  
This connector sends 4 DMX channels output  
to the DMX fixture or DMX pack.  
6. DMX Polarity Select:  
Move to select DMX polarity.  
4
 
2. Operation Guide  
Turn the power on, this unit will return to the function state of last time  
automatically.  
This unit has 12 scenes, each consists of 4 DMX channels. Each time  
this unit can send one scene.  
2.1 Chase Mode  
2.1.1 Program Mode  
Press the Mode pedal to activate Program mode,  
the 4-digit Segment Display shows  
PROG  
Press Up or Down pedal to select any of  
the 20 built-in programs to chase, the 2-digit  
Segment Display shows the current program.  
01-16 represents 1-16 programs, and A1-A4  
represents 4 auto programs.  
2.1.2 Auto/Music Mode  
Press the Mode pedal several times until  
the 4-digit Segment Display shows  
auto  
When "AUTO" appears, it is in Auto mode,  
Or  
the programs chase with set speed and fade  
time. When " MUSI" appears, it is in Music  
mode, the programs chase according to the  
music rhythms.  
5
 
2. Operation Guide  
2.1.3 Speed Mode  
Press the Mode pedal several times until  
the 4-digit Segment Display shows  
In Speed mode, press Up/Down pedal to  
adjust chase speed. A value of 01 gives the  
slowest speed, and the value of 99 gives the  
fastest speed.  
2.1.4 Fade Time Mode  
Press the Mode pedal several times until  
the 4-digit Segment Display shows  
In Fade Time mode, press Up/Down pedal to  
adjust fade time from instant to 60 seconds.  
When "00" appears in the 2-digit Segment  
Display, the programs will fade in or out instantly.  
When "60" appears, the programs will fade in or  
out in 60 seconds.  
2.1.5 Master Dimmer Mode  
Press the Mode pedal several times until  
the 4-digit Segment Display shows  
In Master Dimmer mode, press Up/Down pedal to  
adjust the intensity of the chase of programs.  
When "00" appears in the 2-digit Segment Display,  
all channels of the programs will be fully off.  
When "FF" appears, all channels of the programs will  
be fully on.  
6
 
2. Operation Guide  
2.1.6 Scene Mode  
Press the Mode pedal several times until the  
4-digit Segment Display shows  
In Scene mode, press Up/Down pedal to select  
the scene.  
2.2 Scene Channel Dimmer Mode  
Press and hold down the Mode pedal 3 seconds  
until the 4-digit Segment Display shows  
SE.S  
Press Up/Down pedal to adjust the intensity of  
channel 1 for the current scene. Once the intensity  
is set, press Mode pedal to select channel 2, then  
adjust the intensity for the channel. 00 will give the  
lowest intensity, and FF will give full intensity.  
Repeat the above steps until all four channels  
are set. Press and hold down the Mode pedal 3  
seconds to deactivate this mode.  
2.3 Full On  
Press the Full On pedal, all channel LEDs will be fully on, all channel  
will be full output. Release this pedal deactivates this function and  
return to normal mode.  
Press and hold down the Full On pedal 2 seconds, scene 11 is activated.  
Press this pedal again to leave this scene and return to normal mode.  
7
 
2. Operation Guide  
2.4 Stand By  
Press the Stand By pedal, the Stand By LED will flash, all channel will  
be zero output. Press this pedal again to leave mode and return to  
normal mode.  
Press and hold down this pedal 2 seconds, scene 12 is activated.  
Press this pedal again to leave this scene and return to normal mode.  
2.5 MIDI Operation  
2.5.1 MIDI Channel Setting  
Press the Mode and Stand By pedals at a time,  
the 4-digit Segment Display shows  
ch  
Press Up/Down pedal to select the MIDI channel  
within 01-16.  
Press the Mode pedal to leave this mode.  
2.5.2 MIDI Implementation  
This unit will send and receive Note On and Note Off data according  
to the following table:  
Note Number  
Function  
Mode pedal  
Up pedal  
22  
23  
24  
25  
26  
Down pedal  
Full On pedal  
Stand By pedal  
8
 
3. Technical Specifications  
Power Input ................................................... AC 120V~60Hz, 0.35A  
DMX Output ............................................ 3-pin female XLR socket  
Audio Input ....................................... 0.1V-1Vpp by 1/4" mono jack  
Dimensions ...........................................................444x195x65mm  
Weight..................................................................................... 3.2Kg  
R
American DJ  
24-004-0552  
ALL RIGHTS RESERVED.  
Web site: www.americandj.com  
Rev 1.0 Feb., 2001  
9
 

3Com Network Card Dual 56K User Manual
3Comr TCM 465V 459V 36 User Manual
Acer Server AR380 F1 User Manual
ADTRAN Router A203 User Manual
AEG Washer 50720 User Manual
Aiphone Car Video System MFH U User Manual
Aleratec Computer Accessories 330104 User Manual
Apple MP3 Player MD717LL A User Manual
Axis Communications Security Camera 231D+ User Manual
Banner Stud Sensor ac Voltage Series User Manual