American DJ Stereo System Progressor User Manual

Instructions  
American DJ  
®
Us e r  
Progressor™  
Built in programs  
CAUTION!  
Master slave  
capabilities  
Read instructions before  
installing or plugging  
unit in.  
SPECIFICATIONS: MODEL - Progressor™  
HALOGEN LAMP WARNING!  
Weight:  
Size:  
Lamp:  
Fuse:  
24 lbs.  
This fixture is fitted with halogen  
lamps which are highly susceptible  
to damage if improperly handled.  
Never touch lamp with bare fingers  
as the oil from your hands will  
shorten lamp life. Also, never move  
fixture until lamp has had ample  
time to cool. Remember, lamps are  
not covered under warranty  
conditions.  
16"H x 11"W x 14.5"L  
120V 300W  
7A  
Supply Voltage: 120V/60Hz  
Working Position: Any Safe position  
Duty Cycle: 10 min., on, 10 min. off  
Colors: Multiple Colored Lens  
Optional: ZB-ADJ300 120V 300W 150 hr. Long Life lamp  
also available  
OPERATING INSTRUCTIONS:  
Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via its internal microphone and not  
lightly tapping on the case. Adjust the sensitivity knob on the unit to music sensitivity. Unit will Master/ Slave by setting  
dip switch on back of unit and connecting via XLR Cables. All Dip switches off is Master, #1 on is for Slave. These set -  
tings must be done before plugging in to power because dip switch settings can not change once unit is on. If no sound is  
detected by unit for 3 seconds lights will turn off. Be sure sensitivity is up, do not to obstruct cooling vents and keep in a  
well ventilated area. For best results, fog or special effects smoke must be used in order to see the beams of light.  
The 1/ 4” p hone p lug on the c ontrol is not for a ud io inp ut, it is for a b la c kout c ontrol, if you c onne c t a ud io into this it will  
b urnout the c irc uit b oa rd .  
CAUTION: Front part of fixture will get extremely hot if operated for long periods. For optimum performance, use a 10 min  
ON 10 min OFF duty cycle. Let unit cool before handling or replacing lamp. Caution! Never open unit when in use. Always  
disconnect main power before servicing or replacing lamp. Remember to always replace with same lamp and fuses.  
Lamp replacement: Remove door on top cover of unit and disconnect socket from rear of lamp. Remove and replace  
lamps.  
For service contact your American DJ Dealer.  
Affordable Quality Lighting Products from American DJ ® Los Angeles, CA. 90058 USA  
 

3Com Network Card 3C900B User Manual
ADC Switch Radiator II User Manual
Agilent Technologies Computer Accessories G1978B User Manual
Akai DJ Equipment MPC500 User Manual
Alpine CD Player CDA 9855 User Manual
Alvin Patio Furniture CH55A User Manual
Amazon eBook Reader D00511 User Manual
American Audio Network Card VersaPort User Manual
Bacharach Burner MZF User Manual
Behringer Microphone T 47 User Manual