Bang Olufsen CRT Television 41086 User Manual

BeoCenter 6–26  
Guide  
 
Contents  
3
Introducing your Bang & Olufsen television and Beo4, 4  
Find out how to use the Beo4 remote control and bring up the menus on the  
screen.  
Watch TV, 6  
Find out how to operate the daily functions of your television.  
Adjust sound and picture format, 8  
How to adjust volume and change sound mode. How to change picture format.  
Teletext, 10  
How to use the teletext functions of your television, for example MEMO pages.  
Use Groups, 12  
How to use the Groups function in your television and create groups of favourite  
programs.  
Use the radio, 14  
How to use the built-in radio.  
The pincode system, 16  
How to utilise the pincode system of your television.  
Maintenance, 18  
How to clean your television and change batteries in the Beo4 remote control.  
 
Introducing your television and Beo4  
4
For information about how to operate connected  
The Beo4 remote control gives you access  
to all functions. When a function is in use,  
you are informed via displays on Beo4  
or on the television.  
equipment, refer to the Guide enclosed with it.  
For information on how to add extra functions to  
those shown in the Beo4 display, refer to the  
chapter ‘Customise Beo4’ In the Reference book.  
Switch on the television  
TV  
TV  
The Beo4 display shows the source you have  
selected, or extra functions available when you  
press the LIST button  
FORMAT  
TV  
DTV  
LIGHT  
DVD  
RADIO  
CD  
Switch on the DVB module if your television is  
equipped with one, or switch on a connected  
set-top box  
DTV  
RADIO  
Switch on the radio, if your television is equipped  
with the optional FM or FM/DAB module  
V MEM  
RECORD  
A MEM  
Select programs or teletext pages. Enter data in  
on-screen menus  
0 9  
7
4
8
5
2
0
9
6
MENU  
TEXT  
Bring up the main menu  
Switch on teletext  
Enter information in on-screen menus.  
Press or while TV or radio is on to select a  
program Group you have created  
1
3
Adjust sound volume: press in the middle to mute  
the sound  
TEXT  
MENU  
Accept and store instructions or settings. Press  
and hold to call up a program list  
GO  
EXIT  
Exit all on-screen menus  
GO  
Step up or down through programs or menu items  
Switch the television to standby  
Reveal additional functions in the Beo4 display,  
such as FORMAT  
LIST  
LIST  
EXIT  
STOP  
 
5
Displayed information and menus  
Information about the selected source is  
shown in the display. On-screen menus allow  
you to adjust settings.  
Menu name  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TV TUNING  
EDIT PROGRAMS  
TIMER RECORDING  
PLAY TIMER  
Menu options  
ADD PROGRAM  
AUTO TUNING  
OPTIONS  
STAND POSITIONS  
MANUAL TUNING  
LINK FREQUENCY  
EDIT PROGRAM  
ADD PROGRAM  
AUTO TUNING  
Option  
contents  
1 DR1  
2 TV2  
3 . . . . . . . .  
selec
Information  
field  
GO  
select  
Examples of on-screen menus. As you highlight  
menu options, the contents of each option appear  
in grey below the options.  
TV  
How to use on-screen  
menus …  
Press to switch on the television  
TV  
Press to bring up the TV SETUP  
menu  
MENU  
Press to move between the  
different menu options  
Press to reveal different settings  
Press to bring up a menu or store GO  
a setting you have made  
Press to step back through  
previous menus  
STOP  
Press to exit all menus  
EXIT  
 
Watch TV  
6
This chapter describes daily use of  
your television: how to switch the  
television on, choose a program and  
switch the television off.  
Select a TV program  
Bring up a TV list  
When you switch the television on, the last  
program viewed appears on the screen.  
All your TV programs appear on a list, which  
you can bring up on the screen. The list  
contains program numbers and names, and  
can contain up to 99 TV programs. You can  
also bring up a program list for Groups of  
programs.  
Press to switch on the television  
TV  
In addition, it describes two functions  
that make watching TV easier and  
more enjoyable:  
Press a program number to go  
directly to that program  
0 9  
Press to switch on the television  
TV  
– The TV list gives you an overview  
of all your programs, and you can  
also view a list of programs you  
have placed in a Group;  
Press to change programs one by  
one  
Press and hold to bring up a TV  
list on the screen  
GO  
Press to switch the television to  
standby  
Press or to step between  
‘pages’ in the program list  
– If your television is equipped with  
an optional motorised stand, you  
can turn the television.  
Pressing 0 swaps between the  
current TV program and  
previous TV program.  
To select a program, enter the  
program number, or …  
0 9  
For further information about Groups,  
refer to the chapter ‘Use Groups’ on  
page 12.  
… press until the desired  
program is highlighted  
Press to switch on the chosen  
program, or …  
GO  
… press to leave the menu  
EXIT  
Bring up the program list for  
a specific Group …  
Press to switch on the television  
TV  
Press or repeatedly to step  
through your Groups  
Press to bring up the chosen  
Group  
GO  
GO  
Press and hold to bring up the  
program list for this Group  
Press or to see the program  
lists for the other Groups  
NOTE! If the screen is overheated, black spots  
may appear in the picture. These spots disappear  
again, once the television cools down to normal  
temperature.  
 
7
Turn the television  
If you have a motorised stand, you can turn  
the television using your Beo4 remote control.  
TV PROGRAM LIST  
DR2  
1
2
3
4
5
6
7
8
9
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
Press repeatedly to display  
STAND on Beo4  
LIST  
STAND  
Press to turn the television to the  
left or the right, or …  
. . . . . . . .  
10 . . . . . . . .  
11 . . . . . . . .  
12 CNN  
… press the number buttons to  
choose a pre-defined position; 1  
represents the far left position, 9  
represents the far right position  
1 9  
13 N3  
14 . . . . . . . .  
15 SAT 1  
16 SVT 2  
17 NRK  
The television can also tilt up and down while on a  
motorised stand or the wall bracket, but you can  
only tilt the television manually.  
18 TV4  
GO  
select  
more  
For further information about  
how to preset positions for TV  
The program list for TV is now called up. It  
provides you with an overview of all your available viewing, refer to the chapter ‘Set  
TV programs.  
positions for the television to  
turn to’ on page 28 in the  
Reference book.  
NEWS  
DR1  
DR2  
TV2  
BBC  
CNN  
ZDF  
RTL7  
EUROSPRT  
GO  
select  
group  
Group list… Programs selected for a Group also  
appear in the program lists for all tuned programs.  
 
Adjust sound and picture format  
8
Several sound adjustment possibilities  
are available in your television.  
Adjust volume or mute the sound  
Sound type or language  
You can adjust volume or mute the sound at  
any time.  
While you are watching TV, you can switch  
between the types of sound that are  
available.  
You can adjust the volume or mute  
the sound completely at any time.  
Press either end of the button to  
adjust the volume up or down  
Press repeatedly to display  
SOUND* on Beo4  
LIST  
SOUND  
If programs are broadcasted with  
different sound types or languages,  
you can choose between the sound  
types or languages.  
Press in the middle of the button  
to mute the sound  
Press to bring up the current  
sound type in the display  
GO  
Press either end of the button to  
bring the sound back  
Press GO repeatedly to switch to GO  
another sound type or language  
in a multi-language programme  
If speakers are connected to your  
television, you can adjust the speaker  
balance and select a speaker  
combination.  
Prolonged listening at high  
volume levels can cause hearing  
damage!  
Press to leave the SOUND  
function  
EXIT  
While watching TV, you can adjust  
the picture format.  
You can store your favourite sound  
type when tuning in your TV  
channels. For further information,  
refer to the chapter ‘Edit tuned  
programs’ on page 20 in the  
Reference book.  
*NOTE! In order to display SOUND on Beo4, you  
must first add it to the Beo4 list of functions. Refer  
to the chapter ‘Customise Beo4’ on page 66 in the  
Reference book.  
 
9
Speaker balance or combination  
Picture format  
If you connect loudspeakers to your  
television, you can adjust speaker balance  
and change the speaker combination at any  
time.  
When you select a format yourself, the  
automatic format selection is deactivated,  
until you switch to a different channel or  
change source.  
Picture formats to choose from  
FORMAT 1 … For standard TV pictures. Three  
variations are available: 4:3, 15:9 and Panoramic  
view (for the largest picture).  
FORMAT 2 … For letter-box pictures. When you  
select FORMAT 2, the picture is automatically  
adjusted vertically. This ensures that program  
names or subtitles – if these appear in the  
broadcasted picture – can be seen.  
Pres repeatedly to display  
Press repeatedly to display  
FORMAT on Beo4  
LIST  
FORMAT  
SPEAKER on Beo4  
LIST  
SPEAKER  
Press to adjust the balance  
between the left and right  
speakers  
Press if you want to optimise the GO  
picture, or …  
FORMAT 3 … For genuine 16:9 wide-screen  
pictures. FORMAT 3 is usually selected  
automatically. If this is not the case, you can  
select it yourself.  
… press the number of the  
desired picture format  
1 3  
Press to select a speaker  
combination  
1 5  
If you have chosen Format 1 …  
Press or to select variations  
of this format  
Press to remove SPEAKER from  
the Beo4 display and return to  
the source you were using  
EXIT  
If you have chosen Format 1*  
or Format 2 …  
Speaker combinations  
SPEAKER 1 … Sound in the television speakers  
Press or to move the  
picture up and down  
only.  
SPEAKER 2 … Stereo sound in the two fornt  
speakers.  
Press to leave the FORMAT  
EXIT  
SPEAKER 3… The television speakers and the front function  
speakers are active.  
*Pictures in 4:3 format cannot be  
moved up and down.  
*NOTE! For further information about how to  
connect speakers to the television, refer to the  
chapter ‘Socket panel’ on page 40 in the  
Reference book.  
 
Teletext  
10  
If you select a program and the  
broadcaster offers a teletext service,  
the television gives you access to  
teletext pages and any subpages  
linked to the pages.  
Basic teletext functions  
PAGE PROGRAM HALT REC SETUP REVEAL  
P100 BBC S100 Wed 13 Oct 12:39:34  
Navigate through teletext pages by using the  
menu bar at the top of the teletext page.  
PAGE PROGRAM HALT REC SETUP REVEAL  
P100 BBC S100 Wed 13 Oct 12:39:34  
> Press TEXT to gain access to teletext and EXIT  
to leave teletext.  
The arrow buttons on Beo4 and the  
menu bar at the top of the screen,  
help you move to the page you want.  
When you get there, you can pause  
the turning of subpages to read them  
at your own pace.  
To move to a new page …  
> Enter the number of the page you wish to see,  
or …  
> … press to move the highlighted cursor to  
To stop subpages from turning …  
PAGE.  
> Press STOP to stop subpages from turning, or …  
> … move the cursor to HALT and press GO. HALT  
is replaced by a set of four digits.  
> Use and to step to the subpage you wish  
to see, or …  
> Press or to step between pages, and hold  
to step faster.  
> Pressing GO steps to index pages (100, 200,  
300 …).  
The television can remember your  
favourite pages, reveal hidden  
> … enter its number using the number buttons  
on Beo4.  
To move to another teletext service …  
> Press to move the highlighted cursor to  
PROGRAM.  
messages or help you switch to  
another program’s teletext service. To  
make your favourite teletext pages  
appear first when you bring up  
teletext, store them as MEMO pages.  
> Press GO to restart page turning.  
If MEMO pages have been created, MEMO is  
highlighted when you switch on teletext. Press  
or while MEMO is highlighted to find  
PROGRAM.  
To reveal hidden messages and the like …  
> Press to move the highlighted cursor to  
REVEAL.  
> Press GO to reveal hidden text on the current  
page.  
> Press GO to bring up a program list.  
> Press or to find a desired program.  
> Press GO to switch to another teletext service.  
NOTE! If your television is linked via a BeoLink  
cable to another television, stored MEMO pages  
are not shared among these televisions. MEMO  
pages must be stored manually on each linked  
television.  
 
11  
Store favourite teletext pages  
Day-to-day use of MEMO pages  
PAGE MEMO1  
P100 BBC  
HALT REC SETUP REVEAL  
Nine MEMO pages are available for each  
television program’s teletext service.  
You may wish to refer to your teletext MEMO  
pages quickly, for example, if you are leaving  
for work and wish to check traffic information  
on a teletext service.  
S100  
Wed 13 Oct  
12:39:34  
PAGE MEMO2  
P100 BBC  
HALT REC SETUP REVEAL  
S100  
Wed 13 Oct  
12:39:34  
To create a MEMO page …  
> Bring up a page you view often.  
> Press or to move the cursor along the menu To view MEMO pages …  
bar to SETUP and press GO. The 9 available  
MEMO slots are shown by number. The first is  
highlighted.  
> Press TEXT to bring up teletext.  
> Press or to move between MEMO pages.  
> Press EXIT to leave teletext.  
> Press GO to store the current page. The cursor  
moves to the next available MEMO slot.  
> Use the number buttons on Beo4 to select the  
next teletext page you wish to store.  
To delete a MEMO page …  
> Press or to move the cursor to SETUP and  
press GO.  
> Repeat the procedure for each page you wish to > Move the cursor to the MEMO page you wish to  
store. delete and press the yellow button.  
> To leave the MEMO setup, press or to move > Press the yellow button again to confirm.  
the cursor to BACK and press GO.  
> Press EXIT to leave teletext.  
To see teletext subtitles …  
If you would like available teletext subtitles to  
appear automatically for a particular program,  
store the teletext subtitles page as MEMO page 9.  
 
Use Groups  
12  
If you have stored a lot of television  
and radio* programs and want to get  
to your favourites quickly without  
going through the list each time,  
place them in a Group. You no longer  
need to step through programs you  
do not use.  
Select programs in a Group  
Create Groups  
You can gain access to your Groups by  
activating Groups mode. Press the arrow  
buttons to select the Group you are looking  
for, then step through the programs in this  
Group.  
You can create up to eight different Groups.  
Each Group can contain up to 18 programs.  
The same program can be stored in more  
than one Group.  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
Press to switch on the television, TV  
or …  
> Press MENU to bring up the SETUP menu,  
PROGRAM GROUPS is already highlighted.  
> Press GO to bring up the PROGRAM GROUPS  
menu.  
Name the Groups after the people  
who use them – ‘Dad’ or ‘Mary’ – or  
according to the types of programs  
included, like ‘News’ or ‘Sports’.  
… press to switch on the radio  
RADIO  
Move left or right until your  
Groups are displayed  
> Press to move the cursor to an empty Group  
and press the green button to be able to name  
a new Group.  
When you have created and selected  
a particular Group, you only step  
through the TV and radio programs  
belonging to this particular Group.  
Switch to a different Group to watch  
a different set of programs or switch  
from GROUPS to TV to see all the  
tuned TV programs.  
When you find the Group you  
want, press GO to select it  
GO  
> Press or to select characters.  
> Press or to move to the previous or next  
character space.  
Step up or down through the  
programs in that particular  
Group  
> Press GO to store the name, and press GO  
again to be able to copy programs into the new  
Group.  
> Press or to find a program you wish to  
copy to the new Group.  
Use the number buttons to enter 0 9  
the number of the program you  
want to see  
> Press to copy the program to your Group.  
> Press GO to store your Group when you have  
finished copying programs.  
When you switch from a TV program  
to a radio program in a group, the  
screen will switch off and show your  
chosen radio display.  
Move left or right to switch to  
> Press STOP to back up through previous menus  
or press EXIT to exit all menus.  
another Group – and press GO  
to bring it up  
GO  
To bring up a program list for the  
current Group, press and hold  
GO in Groups mode. To select all  
available TV programs, press TV.  
*NOTE! Radio is only available if your television is  
equipped with the optional FM or FM/DAB  
module.  
 
13  
Move programs within a Group  
You can rearrange the order in which your  
programs appear within a Group and delete  
programs in a Group.  
TV SETUP  
NEWS  
PROGRAM GROUPS  
DR1  
DR2  
TV2  
BBC  
CNN  
ZDF  
RTL7  
EUROSPRT  
PROGRAM GROUPS  
TUNING  
GROUP1  
. . .  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
TIMER RECORDING  
PLAY TIMER  
. . .  
> Press MENU to bring up the SETUP menu  
PROGRAM GROUPS is already highlighted.  
> Press GO to bring up the PROGRAM GROUPS  
menu.  
OPTIONS  
. . .  
STAND POSITIONS  
. . .  
. . .  
GROUP1  
GO  
select  
group  
.
.
.
.
.
.
. . .  
. . .  
> Press to highlight a Group and press GO to  
select it.  
selec
name  
new group  
move  
create group  
> Press to highlight the program you wish to  
move or delete.  
PROGRAM GROUPS  
GO  
A
> Press to move the program out of the list and  
press or to move it to the new position.  
> Press to move the program back into the list,  
or press the yellow button to delete it. When  
you delete a program in the list, the remaining  
programs contract.  
character  
next  
GO  
accept  
PROGRAM GROUPS  
MY GROUP  
. . .  
> If the program changed places with another  
program, then move this program to a new  
position.  
name  
move  
create  
GO  
COPY TV  
TO MY GROUP  
> When you finish moving or deleting programs in  
a Group, press GO to store the Group.  
> Press STOP to back up through previous menus  
or press EXIT to exit all menus.  
1 DR2  
2 TV2  
3 . . . . . . . .  
4 EUROSPORT  
5 ZDF  
DR2  
SKY NEWS  
ZDF  
RADIO 2  
BBC  
6 ARD  
7 . . . . . . . .  
. .  
. .  
15 SAT 1  
16 SVT 2  
17 NRK  
18 TV4  
copy  
accept  
GO  
 
Use the radio  
14  
If your television is equipped with the  
optional FM module, it tunes in  
available radio programs  
Listen to tuned programs  
See list of all programs  
To activate the built-in radio, choose RADIO  
as your source. The last program you listened  
to is switched on automatically.  
Choose RADIO as your source and call up a  
program list to get a complete overview of  
the available radio programs.  
automatically when it is installed for  
the first time.  
Press to switch on the radio.  
RADIO  
Press to switch on the radio  
RADIO  
GO  
If your television is equipped with the  
optional FM/DAB module, DAB  
programs are also tuned in  
automatically during the first-time  
setup.  
Step up or down through the  
available tuned programs, or …  
Press and hold to bring up a  
radio program list on the screen  
… press the number of the  
0 9  
Press or to step between  
‘pages’ in the program list  
program you want to listen to  
Press to see the name or number GO  
To select a program, enter the  
program number, or …  
0 9  
Once the programs are tuned in, you  
can either activate the radio and step  
through the tuned programs, key in  
the number of the program you want,  
or you can bring the program list up  
on the screen and find the desired  
program there.  
of the current program  
Press to swap between the  
current and previous radio  
programs  
0
… press until the desired  
program is highlighted  
Press to switch on the chosen  
program, or …  
GO  
Press another source button,  
such as TV to switch to television  
channels  
TV  
… press to leave the menu  
EXIT  
If you have created program Groups  
you can also call up program lists for  
your Groups.  
NOTE! For more information about how to tune in  
additional programs, refer to the chapter ‘Re-tune  
or add programs’ on page 26 in the Reference  
book.  
 
15  
Bring up the program list for  
a specific Group …  
RADIO PROGRAM LIST  
P1  
P2  
P3  
1
2
3
4
5
6
7
8
9
Press to switch on the radio  
RADIO  
GERNO VERSI FOLLOW EPIUM  
RADIO  
3
P4  
BBC CLASSIC  
BBC National DAB  
Press or repeatedly to step  
through your Groups  
STRUER  
MVEST  
. . . . . . . .  
. . . . . . . .  
BBC1  
Press to bring up the chosen  
Group  
GO  
GO  
10 . . . . . . . .  
11 SR1  
12 SR2  
13 SR3  
14 . . . . . . . .  
15 VIBORG  
16 NRK1  
17 NRK2  
18 NRK3  
Press and hold to bring up the  
program list for this Group  
Press or to see the program  
lists for the other Groups  
During first-time setup your are prompted to  
choose the radio display setting, you prefer. Your  
choice determines what is shown on the screen  
GO  
select  
more  
The program list for radio is now called up. It  
provides you with an overview of all your available when you listen to radio.  
radio programs. Tuned DAB programs appear  
together with FM programs in the list.  
MY RADIO  
P1  
P2  
P3  
RADIO MW  
NRK  
BBC  
SR1  
GO  
select  
group  
Group list… Programs selected for a Group also  
appear in the program lists for all tuned programs.  
 
The pincode system  
16  
The pincode system is intended to  
make normal use of your television  
impossible for someone who does  
not know the pincode. You choose  
whether or not to activate the  
pincode system.  
Activate the pincode system  
Bring up the TV SETUP menu on the screen,  
activate the PINCODE menu and choose from  
the submenus. If you wish to deactivate the  
pincode system, you can do so by deleting  
your pincode.  
PINCODE  
PINCODE  
CONFIRM PINCODE  
0 .  
.
.
.
.
.
.
To activate the pincode system …  
When the pincode system is activated  
and the television has been  
disconnected from the mains for 15–30  
minutes, the pincode system goes  
into effect.  
next  
> Press MENU to bring up the TV SETUP menu.  
> Press twice, followed by STOP. The PINCODE  
menu appears on the screen.  
GO  
accept  
If you inadvertently press a wrong button while  
entering a code, press STOP. The entry is  
cancelled and the input fields are cleared.  
> Use the number buttons or  
on Beo4 to  
enter the four digits of your code. Press to go  
back to digits you wish to correct and use or  
to change them.  
When reconnected and switched on,  
the television automatically switches  
itself off after four minutes. Entering  
the pincode returns the television to  
normal.  
> Press GO after the last digit is found.  
> Re-enter your code to confirm it and press GO  
again. If the two codes are not identical, the  
input fields are cleared and you must enter the  
code again.  
To change or delete your pincode …  
> Press MENU to bring up the TV SETUP menu.  
> Press twice, followed by STOP. The PINCODE  
menu appears on the screen.  
PINCODE  
DELETE PINCODE  
NEW PINCODE  
> Enter the correct pincode and press GO.  
DELETE PINCODE is highlighted.  
> To delete your code, press GO.  
> To change your code, press to highlight  
NEW PINCODE and press GO. Enter the new  
GO  
select  
code using the number buttons or  
and  
press GO. Re-enter the new code to confirm it.  
NOTE! If you change your pincode more than five  
times within a three-hour period, the PINCODE  
menu becomes inaccessible for three hours,  
assuming the system remains on during this time.  
Switching off the system lengthens the delay.  
 
17  
Use your pincode  
If your television has been disconnected from When your television is switched on …  
PINCODE  
the mains for 15–30 minutes, the television  
prompts you for the pincode when you  
switch it on. You may not be able to switch  
the television on immediately – wait  
> Enter the code digits using the number buttons  
or  
PINCODE  
0 .  
.
.
.
> Press GO when the last digit is entered.  
> Your television starts up again.  
approximately 30 seconds and try again.  
Five incorrect entries will cause the television to  
next  
accept  
GO  
IMPORTANT! If you are prompted for a pincode shut down for three hours, during which  
the first time you switch on your television,  
contact your Bang & Olufsen retailer.  
operation is not possible.  
If you have forgotten your pincode …  
> Contact a Bang & Olufsen retailer to receive a  
five-digit mastercode.  
MASTERCODE  
MASTERCODE  
0 .  
.
.
.
> When the television prompts you for your  
pincode, press and hold to bring up the  
MASTERCODE menu.  
> Entering the code digits using the number  
next  
accept  
buttons or  
and pressing GO will deactivate  
GO  
your pincode and reactivate your television.  
To use the pincode system again …  
> Follow the procedure for activating the pincode  
system.  
NOTE! Should you lose or forget your code,  
contact your Bang & Olufsen retailer. Your retailer  
can provide you with a mastercode, which  
disables your pincode.  
 
Maintenance  
18  
Regular maintenance, such as cleaning  
the television, is the responsibility of  
the user. To achieve the best result,  
follow the instructions to the right.  
Contact your Bang & Olufsen retailer  
to determine recommendations for  
regular maintenance.  
Cleaning  
Never use alcohol or other solvents to clean any  
part of the television, stand or wall bracket!  
Anti-reflex coated screen …  
To clean the picture screen, use a mild window  
cleaning fluid (not containing alcohol). To retain  
the optimum performance of the screen, make sure  
that no streaks or traces of the cleaning fluid are  
Cabinet surfaces  
Wipe dust off the surfaces using a dry, soft cloth.  
Remove grease stains or persistent dirt with a soft, left on the screen.  
lint-free, firmly wrung cloth, dipped in a solution of  
water containing only a few drops of mild detergent, Beo4  
such as washing-up liquid.  
Wipe the Beo4 remote control with a soft, lint-free,  
firmly wrung cloth.  
The speaker cover may also be cleaned with a  
vacuum cleaner, set to the lowest level.  
Changing the Beo4 batteries  
When BATTERY appears in the Beo4 display, it is  
time to change the batteries in the remote control.  
2
1
The Beo4 requires three batteries. We recommend  
that you use Alkaline batteries only (1.5 V – size  
AAA). Replace the batteries as shown on this  
page. Keep a finger on top of the batteries until  
the lid is replaced  
3
2
1
When you have replaced the batteries, wait about  
10 seconds until TV appears in the display. The  
Beo4 remote control is then ready for use.  
Do not expose batteries to excessive heat such as  
sunshine, fire or the like!  
NOTE! If the front screen glass should crack or  
chip, or if it should be damaged in any way, it  
must be replaced immediately, as it could other-  
wise cause injury. You can order replacement  
front screen glass from your Bang & Olufsen  
retailer.  
 
For your information …  
Your needs as a user are given careful  
consideration during the design and  
development process of a Bang & Olufsen  
product and we strive to make our products  
easy and comfortable to operate.  
Therefore, we hope that you will take the  
time to tell us about your experiences with  
your Bang & Olufsen product. Anything  
which you consider important – positive or  
negative – may help us in our efforts to  
refine our products.  
Thank you!  
Write to: Bang & Olufsen a/s  
BeoCare  
Peter Bangs Vej 15  
DK–7600 Struer  
or call/fax: Bang & Olufsen  
Customer Service  
+45 96 84 45 25 (phone)  
+45 97 85 39 11 (fax)  
Technical specifications, features and the use  
thereof are subject to change without notice.  
3507886  
0605  
Printed in Denmark by Bogtrykkergården a-s, Struer  
 

Aga Ranges Cooktop DESN 513534 User Manual
Agri Fab Lawn Aerator 45 0458 User Manual
Airlink Switch UG ASW224 1103 User Manual
Alpine Stereo Amplifier alpine User Manual
Amana Dishwasher W10254855A User Manual
American Standard Humidifier 200A User Manual
Axor Plumbing Product 4406XX0 User Manual
Bacharach Fitness Electronics 19 7037 User Manual
Behringer Computer Monitor A4400 User Manual
Behringer Speaker B315D User Manual