BRK electronic Smoke Alarm 7010 User Manual

FIRE SAFETY TIPS  
Follow safety rules and prevent hazardous situations: 1) Use smoking materi-  
als properly. Never smoke in bed. 2) Keep matches or lighters away from chil-  
dren; 3) Store flammable materials in proper containers;  
4) Keep electrical appliances in good condition and dont overload electrical  
circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys grease- and  
debris-free; 6) Never leave anything cooking on the stove unattended; 7) Keep  
portable heaters and open flames, like candles, away from flammable materi-  
als; 8) Dont let rubbish accumulate.  
USER’S MANUAL  
SMOKE ALARMS  
AC Powered Photoelectric Smoke Alarm  
with Battery Back-Up and Silence Feature  
Keep alarms clean, and test them weekly. Replace alarms immediately if they  
are not working properly. Smoke Alarms that do not work cannot alert you to a  
fire. Keep at least one working fire extinguisher on every floor, and an addition-  
al one in the kitchen. Have fire escape ladders or other reliable means of  
escape from an upper floor in case stairs are blocked.  
Model 7010B  
Input: 120V AC ~, 60Hz, 0.04A  
AC Powered Photoelectric Smoke Alarm  
with Silence Feature  
BEFORE YOU INSTALL THIS SMOKE ALARM  
Model 7010  
Input: 120V AC ~, 60Hz, 0.04A  
IMPORTANT! Read Recommended Locations for Smoke Alarmsand  
Locations to Avoid for Smoke Alarmsbefore beginning. This unit monitors  
the air, and when smoke reaches its sensing chamber, it alarms. It can give  
you more time to escape before fire spreads. This unit can ONLY give an  
early warning of developing fires if it is installed, maintained and located  
where smoke can reach it, and where all residents can hear it, as described  
in this manual. This unit will not sense gas, heat, or flame. It cannot prevent  
or extinguish fires.  
IMPORTANT!  
PLEASE READ CAREFULLY AND SAVE.  
This user’s manual contains important information about your  
Smoke Alarm’s operation. If you are installing this Smoke Alarm for use by  
others, you must leave this manual—or a copy of it—with the end user.  
Understand The Different Type of Smoke Alarms  
Battery powered or electrical? Different Smoke Alarms provide  
different types of protection. See About Smoke Alarmsfor details.  
Know Where To Install Your Smoke Alarms  
US Patent 6,377,182  
Fire Safety Professionals recommend at least one Smoke Alarm on every  
level of your home, in every bedroom, and in every bedroom hallway or  
separate sleeping area. See Recommended Locations For Smoke  
Alarmsand Locations To Avoid For Smoke Alarmsfor details.  
Printed in Mexico  
M08-0050-000  
Models 7010,  
7010B  
Q
09/03  
Know What Smoke Alarms Can and Cant Do  
A Smoke Alarm can help alert you to fire, giving you precious time to  
escape. It can only sound an alarm once smoke reaches the sensor. See  
Limitations of Smoke Alarmsfor details.  
THIS USERS MANUAL HAS BEEN RESIZED TO  
PRINT OUT ON 8-1/2 x 11PAGES.  
Check Your Local Building Codes  
This Smoke Alarm is designed to be used in a typical single-family home. It  
alone will not meet requirements for boarding houses, apartment buildings,  
hotels or motels. See Special Compliance Considerationsfor details.  
TABLE OF CONTENTS  
Fire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Before You Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
How To Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3  
Optional Locking Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where  
the Smoke Alarm is installed before removing it from the mounting  
bracket. Failure to turn off the power first may result in serious  
electrical shock, injury or death.  
Understanding the Indicator Lights  
and Alarm Horn Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
If This Smoke Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
What To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
If You Suspect a Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . .6  
Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
About Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Limitations of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
This unit will not alert hearing impaired residents. It is recommend-  
ed that you install special units which use devices like flashing  
strobe lights to alert hearing impaired residents.  
Installation of this unit must conform to the electrical codes in  
your area; Article 760 of NFPA 70 (NEC), NFPA 72, NFPA 101; SBC  
(SBCCI); UBC (ICBO); NBC (BOCA); OTFDC (CABO), and any other  
local or building codes that may apply. Wiring and installation must  
be performed by a licensed electrician. Failure to follow these  
guidelines may result in injury or property damage.  
This unit must be powered by a 24-hour, 120VAC pure sine wave  
60Hz circuit. Be sure the circuit cannot be turned off by a switch,  
dimmer, or ground fault circuit interrupter. Failure to connect this  
unit to a 24-hour circuit may prevent it from providing constant  
protection.  
All Rights Reserved. © 2003 BRK Brands, Inc.  
BRK Brands, Inc., 3901 Liberty Street Road, Aurora, IL 60504-8122  
Consumer Affairs: (800)323-9005 www.firstalert.com www.brkelectronics.com  
This Smoke Alarm must have AC or battery power to operate.  
On Model 7010B Only:  
If the AC power fails, battery back-up will allow the alarm to sound  
for at least 4 minutes. If AC power fails and the battery is weak,  
protection should last for at least 7 days. If AC power fails and the  
battery is dead or missing, the alarm cannot operate.  
Never disconnect the power from an AC powered unit to stop an  
unwanted alarm. Doing so will disable the unit and remove your  
protection. In the case of a true unwanted alarm open a window or  
fan the smoke away from the unit. The alarm will reset automatical-  
ly when it returns to normal operation. Never remove the batteries  
from a battery operated unit to stop an unwanted alarm (caused by  
cooking smoke, etc.). Instead open a window or fan the smoke  
away from the unit. The alarm will reset automatically.  
®
®
All First Alert and BRK Smoke Alarms conform to regulatory  
requirements, including UL217 and are designed to detect particles of  
combustion. Smoke particles of varying number and size are produced  
in all fires.  
Ionization technology is generally more sensitive than photoelectric  
technology at detecting small particles, which tend to be produced  
in greater amounts by flaming fires, which consume combustible  
materials rapidly and spread quickly. Sources of these fires may include  
paper burning in a wastebasket, or a grease fire in the kitchen.  
Photoelectric technology is generally more sensitive than ionization  
technology at detecting large particles, which tend to be produced in  
greater amounts by smoldering fires, which may smolder for hours  
before bursting into flame. Sources of these fires may include cigarettes  
burning in couches or bedding.  
Connect this unit ONLY to other compatible units. See How To  
Install This Smoke Alarmfor details. Do not connect it to any  
other type of alarm or auxiliary device. Connecting anything else to  
this unit may damage it or prevent it from operating properly.  
For maximum protection, use both types of Smoke Alarms on each  
level and in every bedroom of your home.  
On Model 7010B Only: This Smoke Alarm has a battery drawer  
which resists closing unless a battery is installed. This warns  
you the unit will not operate under DC power without a battery.  
Do not stand too close to the unit when the alarm is sounding. It  
is loud to wake you in an emergency. Exposure to the horn at  
close range may harm your hearing.  
Do not paint over the unit. Paint may clog the openings to the  
sensing chambers and prevent the unit from operating properly.  
1
 
FOLLOW THESE INSTALLATION STEPS (Continued)  
}
}
Interconnected units must meet ALL of the following requirements:  
A maximum of 18 compatible units may be interconnected  
(Maximum of 12 Smoke Alarms).  
The same fuse or circuit breaker must power all interconnected units.  
The total length of wire interconnecting the units should be less than 1000 feet  
(300 meters). The interconnect wire should be #18 gauge or larger, rated at least  
300V. If an interconnect wire is not already part of your household wiring, you will  
need to install one. This type of wire is commonly available at Hardware and  
Electrical Supply stores.  
A. Unswitched 120VAC  
60 Hz source  
B. To additional units; Maximum = 18 total  
(Maximum 12 Smoke Alarms)  
All wiring must conform to all local electrical codes and Article 760 of NFPA 70 (NEC).  
Refer to NFPA 72, NFPA 101, and/or your local building code for further connection  
requirements.  
1. Smoke Alarm  
2. Ceiling or Wall  
3. Power Connector  
4. Wire Nut  
5. Junction Box  
6. Neutral Wire (Wht)  
7. Interconnect Wire  
(Orange)  
8. Hot Wire (Blk)  
OPTIONAL LOCKING FEATURES  
The locking features are designed to discourage unauthorized removal of the battery or Alarm. It is not necessary to activate the locks in single-family  
households where unauthorized battery or Alarm removal is not a concern.  
These Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Smoke Alarm  
to the mounting bracket. You can choose to use either feature independently, or use them both.  
Tools you will need: Needle-nose pliers or utility knife Standard Flathead screwdriver.  
Both locking features use locking pins, which are molded into the mounting bracket. Using needle-nose pliers or a utility knife, remove  
one or both pins from the mounting bracket, depending on how many locking features you want to use.  
To permanently remove either lock, insert a flathead screwdriver between the locking pin and the lock, and pry the pin out of the lock.  
TO LOCK THE BATTERY COMPARTMENT  
(Model 7010B Only)  
TO UNLOCK THE BATTERY COMPARTMENT  
(Model 7010B Only)  
Do not lock the battery compartment until you have installed the  
battery and tested the battery back-up.  
Once the Smoke Alarm is installed, you must disconnect it from the AC power  
before unlocking the battery compartment.  
1. Push and hold Test/Silence button until the alarm sounds:  
3 beeps, pause, 3 beeps, pause.  
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where the  
Smoke Alarm is installed before removing it from the mounting bracket.  
Failure to turn off the power first may result in serious electrical shock,  
injury or death.  
If the unit does not alarm during testing, DO NOT lock the battery com-  
partment! Install a new battery and test again. If the Smoke Alarm still  
does not alarm, replace it immediately.  
2. Using needle-nose pliers or a utility knife, detach one locking pin from  
the mounting bracket.  
Always discharge the branch circuit before servicing an AC or AC/DC  
Smoke Alarm. First, turn off the AC power at the circuit breaker or fuse box.  
Next, remove the battery from Smoke Alarms with battery back-up. Finally,  
press and hold the Test/Silence button for 5-10 seconds to discharge the  
branch circuit.  
1. Remove the Smoke Alarm from the mounting  
bracket. If the unit is locked to the bracket, see  
the section To Unlock the Mounting Bracket.”  
2. Disconnect the power connector by gently prying  
it away from the back of the Smoke Alarm.  
3. Insert a flathead screwdriver under the head of  
the locking pin, and gently pry it out of the bat-  
tery compartment lock. (If you plan to relock the  
battery compartment, save the locking pin.)  
3. Push the locking pin through the hole near the battery drawer on the  
back of the Smoke Alarm.  
4. To relock the battery compartment, close the battery door and reinsert  
locking pin in lock.  
5. Reconnect the power connector to the back of the Smoke Alarm, reattach  
the Smoke Alarm to the mounting bracket, and restore the power.  
When replacing the battery, always test the Smoke Alarm before relocking the  
battery compartment.  
Locking Features (Continued)  
TO LOCK THE MOUNTING BRACKET:  
1. Using needle-nose pliers, detach one locking pin from mounting bracket.  
TO UNLOCK THE MOUNTING BRACKET  
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where  
the Smoke Alarm is installed before removing it from the mounting  
bracket. Failure to turn off the power first may result in serious electri-  
cal shock, injury or death.  
Always discharge the branch circuit before servicing an AC or AC/DC  
Smoke Alarm. First, turn off the AC power at the circuit breaker or fuse  
box. Next, remove the battery from Smoke Alarms with battery back-up.  
Finally, press and hold the Test/Silence button for 5-10 seconds to  
discharge the branch circuit.  
2. Insert the locking pin into the lock located  
opposite from the battery drawer as shown  
in the diagram.  
1. Insert a flathead screwdriver between the  
mounting bracket pin and the mounting bracket.  
3. When you attach the Smoke Alarm to the mounting bracket, the locking  
2. Pry the Smoke Alarm away from the bracket by  
turning both the screwdriver and the Smoke  
Alarm counterclockwise (left) at the same time.  
pins head will fit into a notch on the bracket.  
3
 
UNDERSTANDING THE INDICATOR LIGHTS  
AND ALARM HORN PATTERNS  
AC Power  
All Models  
DC Power  
Model 7010B  
Normal Operation  
Test Condition  
Constant Green LED  
Green LED Off  
Flashing Red LED  
approx. once/minute  
Flashing Red LED  
approx. once/minute  
No Audible Alarm  
No Audible Alarm  
Constant Green LED  
Green LED Off  
Rapidly Flashing  
Red LED  
Rapidly Flashing  
Red LED  
Audible Alarm  
Audible Alarm  
Green LED Off  
Alarm Condition*  
(Initiating Unit)  
Constant Green LED  
Rapidly Flashing  
Red LED  
Rapidly Flashing  
Red LED  
Audible Alarm  
Audible Alarm  
Silence Mode  
Low Battery  
Red LED flashes once  
every 10 seconds  
Red LED flashes once  
every 10 seconds  
Not Applicable  
Alarm chirpapprox.  
once/minute  
NOTE: When power is applied, unit(s) may alarm momentarily.  
*When any Smoke Alarm in an interconnected series triggers an alarm,  
its red LED will flash rapidly. The red LEDs will remain OFF on any remaining  
alarms in the series. This feature helps responders identify which unit(s)  
triggered the alarm.  
WEEKLY TESTING  
REGULAR MAINTENANCE  
NEVER use an open flame of any kind to test this unit. You might  
accidentally damage or set fire to the unit or to your home. The built-  
in test switch accurately tests the units operation as required by  
Underwriters Laboratories, Inc. (UL). If you choose to use an aerosol  
smoke product to test the Smoke Alarm, be certain to use one that  
has been Listed to Underwriters Laboratories, Inc. Safety Standards,  
and use it only as directed. Use of non-UL Listed products or improp-  
er use of UL Listed products may affect the Smoke Alarms sensitivity,  
and may void your warranty.  
Use only the replacement batteries listed below. The unit may not  
operate properly with other batteries. Never use rechargeable batteries  
since they may not provide a constant charge.  
This unit has been designed to be as maintenance-free as possible, but there  
are a few simple things you must do to keep it working properly:  
Test it at least once a week.  
Clean the Smoke Alarm at least once a month; gently vacuum the  
outside of the Smoke Alarm using your household vacuums soft brush  
attachment. Test the Smoke Alarm. Never use water, cleaners or solvents  
since they may damage the unit.  
If the Alarm ever fails to test properly, replace it immediately.  
Products under warranty may be returned to the manufacturer for  
replacement. See Limited Warrantyat the end of this manual.  
If the Smoke Alarm becomes contaminated by excessive dirt, dust and/or  
grime, and cannot be cleaned to avoid unwanted alarms, replace the  
unit immediately.  
DO NOT stand close to the Alarm when the horn is sounding. Exposure  
at close range may be harmful to your hearing. When testing, step away  
when horn starts sounding.  
Relocate the unit if it sounds frequent unwanted alarms. See Locations  
To Avoid For Smoke Alarmsfor details.  
Model 7010B Only: When the battery back-up becomes weak, the  
Smoke Alarm will chirpabout once a minute (the low battery warning).  
This warning should last 7 days, but you should replace the battery  
immediately to continue your protection.  
It is important to test this unit every week to make sure it is working prop-  
erly. Using the test button is the recommended way to test this Smoke  
Alarm. Press and hold the test button on the cover of the unit until the alarm  
sounds (the unit may continue to alarm for a few seconds after you release the  
button). If it does not alarm, make sure the unit is receiving power and test it  
again. If it still does not alarm, replace it immediately. During testing, you will  
hear a loud, repeating horn pattern: 3 beeps, pause, 3 beeps, pause.  
Model 7010B Only  
Choosing a replacement battery:  
Your Smoke Alarm requires one standard 9V battery. The following batteries  
are acceptable as replacements: Duracell #MN1604, (Ultra) #MX1604;  
Eveready (Energizer) #522. You may also use a Lithium battery like the Ultralife  
U9VL-J for longer service life between battery changes. These batteries are  
available at many local retail stores.  
When testing a series of interconnected units you must test each unit individ-  
ually. Make sure all units alarm when each one is tested.  
Actual battery service life depends on the smoke alarm and the environment  
in which it is installed. All the batteries specified above are acceptable  
replacement batteries for this unit. Regardless of the manufacturers suggest-  
ed battery life, you MUST replace the battery immediately once the unit  
starts chirping(the low battery warning).  
4
 
USING THE SILENCE FEATURE  
The Silence Feature can temporarily quiet an unwanted alarm for up to 15  
minutes.  
IF THIS SMOKE ALARM SOUNDS  
RESPONDING TO AN ALARM  
During an alarm, you will hear a loud, repeating horn pattern:  
3 beeps, pause, 3 beeps, pause.  
The Silence Feature does not disable the unitit makes it temporarily  
less sensitive to smoke. For your safety, if smoke around the unit is  
dense enough to suggest a potentially dangerous situation, the unit will  
stay in alarm or may re-alarm quickly. If you do not know the source of  
the smoke, do not assume it is an unwanted alarm. Not responding to an  
alarm can result in property loss, injury, or death.  
If the unit alarms and you are not testing the unit, it is warning you of  
a potentially dangerous situation that requires your immediate atten-  
tion. NEVER ignore any alarm. Ignoring the alarm may result in injury  
or death.  
To silence Smoke Alarms in an interconnected series:  
Never disconnect the AC power to quiet an unwanted alarm.  
Disconnecting the power disables the Alarm so it cannot sense  
smoke. This will remove your protection. Instead, open a window  
or fan the smoke away from the unit. The Alarm will reset  
automatically.  
1. To silence multiple alarms in an interconnected series, you must press the  
Test/Silence button on the unit(s) that triggered the alarm.  
2. Once you activate the Silence feature, the Red LED will flash approximate-  
ly once every 10 seconds.  
If the unit alarms get everyone out of the house immediately.  
3. Pressing the Test/Silence button when in silence will restart the silence  
timer.  
ELECTRICAL SHOCK HAZARD: Attempting to disconnect the power  
connector from the unit when the power is on may result in electrical  
shock, serious injury or death.  
The Silence Feature on these units can temporarily quiet an unwanted alarm  
for up to 15 minutes. To use this feature, press the Test/Silence button on the  
cover. If the unit will not silence and no heavy smoke is present, or if it  
stays in silence mode continuously, it should be replaced immediately.  
When an interconnected system of AC powered units is in alarm, the alarm  
indicator light on the unit(s) that initiated the alarm will blink rapidly. It will  
remain OFF on any remaining units.  
If the unit alarms, get everyone out of the dwelling immediately.  
IF YOU SUSPECT A PROBLEM  
If the unit alarms and you are certain that the source of smoke is not a fire—  
cooking smoke or an extremely dusty furnace, for exampleopen a nearby  
window or door and fan the smoke away from the unit (Use the Silence  
Feature to silence the Alarm). This will silence the alarm, and once the smoke  
clears the unit will reset itself automatically.  
Smoke Alarms may not operate properly because of dead, missing or weak  
batteries (Model 7010B only), a build-up of dirt, dust or grease on the Smoke  
Alarm cover, or installation in an improper location. Clean the Smoke Alarm as  
described in Regular Maintenance,and install a fresh battery, then test the  
Smoke Alarm again. If it fails to test properly when you use the test button, or  
if the problem persists, replace the Smoke Alarm immediately.  
WHAT TO DO IN CASE OF FIRE  
If you hear a chirpapproximately once a minute, replace the battery  
Dont panic; stay calm. Follow your family escape plan.  
(Model 7010B only).  
Get out of the house as quickly as possible. Dont stop to  
get dressed or collect anything.  
If you experience frequent non-emergency alarms (like those caused  
by cooking smoke), try relocating the Smoke Alarm.  
If the alarm sounds when no smoke is visible, try cleaning or  
relocating the Smoke Alarm. The cover may be dirty.  
If the alarm does not sound during testing, make sure it is receiving  
AC power from the household current.  
Feel doors with the back of your hand before opening them.  
If a door is cool, open it slowly. Dont open a hot door. Keep doors  
and windows closed, unless you must escape through them.  
Cover your nose and mouth with a cloth (preferably damp).  
Take short, shallow breaths.  
Meet at your planned meeting place outside your home,  
and do a head count to make sure everybody got out safely.  
Always discharge the branch circuit before servicing an AC or AC/DC  
Smoke Alarm. First, turn off the AC power at the circuit breaker or fuse  
box. Next, remove the battery from Smoke Alarms with battery back-up.  
Finally, press and hold the test button for 5-10 seconds to discharge the  
branch circuit.  
Call the Fire Department as soon as possible from outside.  
Give your address, then your name.  
Never go back inside a burning building for any reason.  
Do not try fixing the alarm yourself this will void your warranty!  
Contact your Fire Department for ideas on making your home safer.  
If the Smoke Alarm is still not operating properly, and it is still under  
warranty, please see How to Obtain Warranty Servicein the Limited  
Warranty.  
Alarms have various limitations. See "Limitations of Smoke Alarms" for  
details.  
5
 
RECOMMENDED LOCATIONS  
LOCATIONS TO AVOID FOR SMOKE ALARMS  
For best performance, AVOID installing Smoke Alarms in these areas:  
FOR SMOKE ALARMS  
Where combustion particles are produced. Combustion particles form  
when something burns. Areas to avoid include poorly ventilated kitchens,  
garages, and furnace rooms. Keep units at least 20 feet (6 meters) from  
the sources of combustion particles (stove, furnace, water heater, space  
heater) if possible. In areas where a 20-foot distance is not possible in  
modular, mobile, or smaller homes, for example it is recommended the  
Smoke Alarm be placed as far from these fuel-burning sources as possi-  
ble. The placement recommendations are intended to keep these Alarms  
at a reasonable distance from a fuel-burning source, and thus reduce  
unwantedalarms. Unwanted alarms can occur if a Smoke Alarm is  
placed directly next to a fuel-burning source. Ventilate these areas as  
much as possible.  
Installing Smoke Alarms in Single-Family Residences  
The National Fire Protection Association (NFPA), recommends one Smoke  
Alarm on every floor, in every sleeping area, and in every bedroom. In new  
construction, the Smoke Alarms must be AC powered and interconnected.  
See Agency Placement Recommendationsfor details. For additional cover-  
age, it is recommended that you install a Smoke Alarm in all rooms, halls,  
storage areas, finished attics, and basements, where temperatures normally  
remain between 40˚F (4˚C) and 100˚F (38˚C). Make sure no door or other  
obstruction could keep smoke from reaching the Smoke Alarms.  
More specifically, install Smoke Alarms:  
On every level of your home, including finished attics and basements.  
Inside every bedroom, especially if people sleep with the door partly or  
completely closed.  
In air streams near kitchens. Air currents can draw cooking smoke into the  
sensing chamber of a Smoke Alarm near the kitchen.  
In very damp, humid or steamy areas, or directly near bathrooms with  
showers. Keep units at least 10 feet (3 meters) away from showers,  
saunas, dishwashers, etc.  
In the hall near every sleeping area. If your home has multiple sleeping  
areas, install a unit in each. If a hall is more than 40 feet long (12 meters),  
install a unit at each end.  
At the top of the first-to-second floor stairway, and at the bottom  
of the basement stairway.  
Where the temperatures are regularly below 40˚F (4˚ C) or above 100˚ F  
(38˚ C) including unheated buildings, outdoor rooms, porches, or unfin-  
ished attics or basements.  
In very dusty, dirty, or greasy areas. Do not install a Smoke Alarm directly  
over the stove or range. Clean a laundry room unit frequently to keep it  
free of dust or lint.  
Specific requirements for Smoke Alarm installation vary from state to state  
and from region to region. Check with your local Fire Department for current  
requirements in your area. It is recommended AC or AC/DC units be inter-  
connected for added protection.  
Near fresh air vents, ceiling fans, or in very drafty areas. Drafts can blow  
smoke away from the unit, preventing it from reaching sensing chamber.  
In insect infested areas. Insects can clog openings to the sensing cham-  
ber and cause unwanted alarms.  
Less than 12 inches (305 mm) away from fluorescent lights. Electrical  
noisecan interfere with the sensor.  
In dead airspaces. Dead airspaces may prevent smoke from reaching  
the Smoke Alarm.  
AVOIDING DEAD AIR SPACES  
Dead airspaces may prevent smoke from reaching the Smoke Alarm. To  
avoid dead air spaces, follow the installation recommendations below.  
On ceilings, install Smoke Alarms as close to the center of the ceiling as pos-  
sible. If this is not possible, install the Smoke Alarm at least 4 inches (102 mm)  
from the wall or corner.  
For wall mounting (if allowed by building codes), the top edge of Smoke  
Alarms should be placed between 4 inches (102 mm) and 12 inches (305 mm)  
from the wall/ceiling line, below typical dead airspaces.  
On a peaked, gabled, or cathedral ceiling, install the first Smoke Alarm  
within 3 feet (0.9 meters) of the peak of the ceiling, measured horizontally.  
Additional Smoke Alarms may be required depending on the length, angle,  
etc. of the ceiling's slope. Refer to NFPA 72 for details on requirements for  
sloped or peaked ceilings.  
INSTALLING SMOKE ALARMS IN MOBILE HOMES & RVS  
For minimum security install one Smoke Alarm as close to each sleeping area as  
possible. For more security, put one unit in each room. Many older mobile homes  
(especially those built before 1978) have little or no insulation. If your mobile  
home is not well insulated, or if you are unsure of the amount of insulation, it is  
important to install units on inside walls only. Smoke Alarms should be installed  
where temperatures normally remain between 40˚F (4˚C) and 100˚F (38˚C).  
WARNING: Test units used in RVs after the vehicle has been in storage,  
before every trip, and once a week while in use. Failure to test units used  
in RVs as described may remove your protection.  
ABOUT SMOKE ALARMS  
Battery (DC) operated Smoke Alarms: Provide protection even when elec-  
tricity fails, provided the batteries are fresh and correctly installed. Units are  
easy to install, and do not require professional installation.  
AC powered Smoke Alarms: Can be interconnected so if one unit senses  
smoke, all units alarm. They do not operate if electricity fails.  
AC with battery (DC) back-up: will operate if electricity fails, provided the  
batteries are fresh and correctly installed. AC and AC/DC units must be  
installed by a qualified electrician.  
This equipment should be installed in accordance with NFPA (National Fire  
Protection Association) 72 and 101. National Fire Protection Association,  
One Batterymarch Park, Quincy, MA 02269-9101. Additional local building and  
regulatory codes may apply in your area. Always check compliance require-  
ments before beginning any installation. This model is not RV listed with  
Underwriters Laboratories Inc.  
Smoke Alarms for Solar or Wind Energy users and battery backup power  
systems: AC powered Smoke Alarms should only be operated with true or  
pure sine wave inverters. Operating this Smoke Alarm with most battery-  
powered UPS (uninterruptible power supply) products or square wave or  
quasi sine waveinverters will damage the Alarm. If you are not sure about  
your inverter or UPS type, please consult with the manufacturer to verify.  
AGENCY PLACEMENT RECOMMENDATIONS  
NFPA 72 (National Fire Code)  
Smoke Alarms shall be installed in each separate sleeping room, outside each  
sleeping area in the immediate vicinity of the bedrooms and on each additional  
story of the family living unit, including basements and excluding crawl spaces  
and unfinished attics.  
Smoke Alarms for the hearing impaired: Special purpose Smoke Alarms  
should be installed for the hearing impaired. They include a visual alarm and  
an audible alarm horn, and meet the requirements of the Americans With  
Disabilities Act. These units can be interconnected so if one unit senses  
smoke, all units alarm.  
In new construction, Alarms shall be so arranged that operation of any one  
Alarm shall cause the operation of all Alarms within the dwelling.  
All these Smoke Alarms are designed to provide early warning of fires if located,  
installed and cared for as described in the users manual, and if smoke reaches  
the Alarm. If you are unsure which type of unit to install, refer to NFPA (National  
Fire Protection Association) 72 (National Fire Alarm Code) and NFPA 101 (Life  
Safety Code). National Fire Protection Association, One Batterymarch Park,  
Quincy, MA 02269-9101. Local building codes may also require specific units  
in new construction or in different areas of the home.  
Smoke Detection-Are More Smoke Alarms Desirable? The required number  
of Smoke Alarms might not provide reliable early warning protection for those  
areas separated by a door from the areas protected by the required Smoke  
Alarms. For this reason, it is recommended that the householder consider the  
use of additional Smoke Alarms for those areas for increased protection. The  
additional areas include the basement, bedrooms, dining room, furnace room,  
utility room, and hallways not protected by the required Smoke Alarms. The  
installation of Smoke Alarms in kitchens, attics (finished or unfinished), or  
garages is not normally recommended, as these locations occasionally experi-  
ence conditions that can result in improper operation.  
California State Fire Marshal (CSFM)  
Early warning detection is best achieved by the installation of fire detection  
equipment in all rooms and areas of the household as follows: A Smoke Alarm  
installed in each separate sleeping area (in the vicinity, but outside bedrooms),  
and Heat or Smoke Alarms in the living rooms, dining rooms, bedrooms,  
kitchens, hallways, finished attics, furnace rooms, closets, utility and storage  
rooms, basements, and attached garages.  
6
 
SPECIAL COMPLIANCE CONSIDERATIONS  
LIMITATIONS OF SMOKE ALARMS  
Smoke Alarms have played a key role in reducing deaths resulting from home  
fires worldwide. However, like any warning device, Smoke Alarms can only work  
if they are properly located, installed, and maintained, and if smoke reaches the  
Alarms. They are not foolproof.  
This Smoke Alarm alone is not a suitable substitute for complete fire  
detection systems in places housing many peoplelike apartment  
buildings, condominiums, hotels, motels, dormitories, hospitals,  
long-term health care facilities, nursing homes, day care facilities, or  
group homes of any kindeven if they were once single-family homes.  
It is not a suitable substitute for complete fire detection systems in ware-  
houses, industrial facilities, commercial buildings, and special-purpose  
non-residential buildings which require special fire detection and alarm  
systems. Depending on the building codes in your area, this Smoke  
Alarm may be used to provide additional protection in these facilities.  
Smoke alarms may not waken all individuals. Practice the escape plan at  
least twice a year, making sure that everyone is involved from kids to grand-  
parents. Allow children to master fire escape planning and practice before  
holding a fire drill at night when they are sleeping. If children or others do not  
readily waken to the sound of the smoke alarm, or if there are infants or family  
members with mobility limitations, make sure that someone is assigned to  
assist them in fire drill and in the event of an emergency. It is recommended  
that you hold a fire drill while family members are sleeping in order to deter-  
mine their response to the sound of the smoke alarm while sleeping and to  
determine whether they may need assistance in the event of an emergency.  
The following information applies to all four types of buildings listed below:  
In new construction, most building codes require the use of AC or AC/DC pow-  
ered Smoke Alarms only. AC, AC/DC, or DC powered Smoke Alarms can be  
used in existing construction as specified by local building codes. Refer to NFPA  
72 (National Fire Alarm Code) and NFPA 101 (Life Safety Code), local building  
codes, or consult your Fire Department for detailed fire protection requirements  
in buildings not defined as households.”  
Smoke Alarms cannot work without power. Battery operated units cannot  
work if the batteries are missing, disconnected or dead, if the wrong type of bat-  
teries are used, or if the batteries are not installed correctly. AC units cannot  
work if the AC power is cut off for any reason (open fuse or circuit breaker, failure  
along a power line or at a power station, electrical fire that burns the electrical  
wires, etc.). If you are concerned about the limitations of battery or AC power,  
install both types of units.  
1. Single-Family Residence:  
Single family home, townhouse. It is recommended Smoke Alarms be  
installed on every level of the home, in every bedroom, and in each bedroom  
hallway.  
Smoke Alarms cannot detect fires if the smoke does not reach the Alarms.  
Smoke from fires in chimneys or walls, on roofs, or on the other side of closed  
doors may not reach the sensing chamber and set off the Alarm. That is why one  
unit should be installed inside each bedroom or sleeping areaespecially if bed-  
room or sleeping area doors are closed at nightand in the hallway between  
them.  
2. Multi-Family or Mixed Occupant Residence:  
Apartment building, condominium. This Smoke Alarm is suitable for use in  
individual apartments or condos, provided a primary fire detection system  
already exists to meet fire detection requirements in common areas like lob-  
bies, hallways, or porches. Using this Smoke Alarm in common areas may not  
provide sufficient warning to all residents or meet local fire protection ordi-  
nances/regulations.  
Smoke Alarms may not detect fire on another floor or area of the dwelling.  
For example, a stand-alone unit on the second floor may not detect smoke from  
a basement fire until the fire spreads. This may not give you enough time to  
escape safely. That is why recommended minimum protection is at least one unit  
in every sleeping area, and every bedroom on every level of your dwelling. Even  
with a unit on every floor, stand-alone units may not provide as much protection  
as interconnected units, especially if the fire starts in a remote area. Some safety  
experts recommend installing interconnected AC powered units with battery  
back-up (see About Smoke Alarms) or professional fire detection systems, so if  
one unit senses smoke, all units alarm. Interconnected units may provide earlier  
warning than stand-alone units since all units alarm when one detects smoke.  
3. Institutions: Hospitals, day care facilities, long-term health care facilities.  
This Smoke Alarm is suitable for use in individual patient sleeping/resident  
rooms, provided a primary fire detection system already exists to meet fire  
detection requirements in common areas like lobbies, hallways, or porches.  
Using this Smoke Alarm in common areas may not provide sufficient warning  
to all residents or meet local fire protection ordinances/regulations.  
4. Hotels and Motels: Also boarding houses and dormitories. This Smoke  
Alarm is suitable for use inside individual sleeping/resident rooms, provided a  
primary fire detection system already exists to meet fire detection require-  
ments in common areas like lobbies, hallways, or porches. Using this Smoke  
Alarm in common areas may not provide sufficient warning to all residents or  
meet local fire protection ordinances/regulations.  
Smoke Alarms may not be heard. Though the alarm horn in this unit meets or  
exceeds current standards, it may not be heard if: 1) the unit is located outside a  
closed or partially closed door, 2) residents recently consumed alcohol or drugs,  
3) the Alarm is drowned out by noise from stereo, TV, traffic, air conditioner or  
other appliances, 4) residents are hearing impaired or sound sleepers. Special  
purpose units, like those with visual and audible alarms, should be installed for  
hearing impaired residents.  
Smoke Alarms may not have time to alarm before the fire itself causes  
damage, injury, or death, since smoke from some fires may not reach the  
unit immediately. Examples of this include persons smoking in bed, chil-  
dren playing with matches, or fires caused by violent explosions resulting  
from escaping gas.  
Smoke Alarms are not foolproof. Like any electronic device, Smoke Alarms are  
made of components that can wear out or fail at any time. You must test the unit  
weekly to ensure your continued protection. Smoke Alarms cannot prevent or  
extinguish fires. They are not a substitute for property or life insurance.  
Smoke Alarms have a limited life. The unit should be replaced immediately if it  
is not operating properly. You should always replace a Smoke Alarm after 10  
years from date of purchase. Write the purchase date on the space provided on  
back of unit.  
LIMITED WARRANTY  
BRK Brands, Inc., ("BRK") the maker of First Alert® brand and BRK® brand products, warrants that for a period of ten years from the date of purchase, this product will  
be free from defects in material and workmanship. BRK, at its option, will repair or replace this product or any component of the product found to be defective during  
the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made  
with a similar product of equal or greater value. This is your exclusive warranty.  
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is  
required to obtain warranty performance. BRK dealers, service centers, or retail stores selling BRK products do not have the right to alter, modify or any way change  
the terms and conditions of this warranty.  
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or  
current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK or an authorized service center. Further, the warranty  
does not cover Acts of God, such as fire, flood, hurricanes and tornadoes or any batteries that are included with this unit.  
BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by  
applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Some states,  
provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the  
above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or  
province to province.  
How to Obtain Warranty Service  
Service: If service is required, do not return the product to your retailer. In order to obtain warranty service, contact the Consumer Affairs Division at  
1-800-323-9005, 7:30 AM - 5:00 PM Central Standard Time, Monday through Friday. To assist us in serving you, please have the model number and  
date of purchase available when calling.  
3920 Enterprise Court, Aurora, IL 60504-8132.  
Battery: BRK Brands, Inc. make no warranty, express or implied, written or oral, including that of merchantability or fitness for any particular purpose  
with respect to battery.  
First Alert® is a registered trademark of the First Alert Trust.  
BRK® is a registered trademark of BRK Brands, Inc.  
Printed in Mexico M08-0050-000  
Q
09/03  
7
 

Black Box Network Hardware 10 mbps economy media converters User Manual
Black Decker Drill 7010 User Manual
Black Decker Juicer JE2001 User Manual
Bosch Appliances Dishwasher SHU 3000 User Manual
Brother Fax Machine MFC 685CW User Manual
Bryant Furnace 348 User Manual
Bushnell Saw LS1440 User Manual
Cables Unlimited Speaker System SPK POOL User Manual
Cace Technologies Refrigerator AirPcap Wireless Capture Adapters User Manual
Canon Printer C3380 Series User Manual