Travel USB Hub
Quick Installation Guide
Congratulations and thank you for purchasing this latest innovat
from Belkin, the USB leader. The Travel USB Hub combines
sleek design with outstanding performance, through four
downstream USB ports. It lets you easily connect all your
USB 1.1 and 2.0 devices to your computer, such as your iPod,
digital camera, printer, MP3 player, and more. Its compact size
and design seamlessly fit and complement any desktop area.
Please carefully review the instructions below to be sure you get
the most from your Belkin Hub.
Installation Instructions:
Step 1: Plug the flat end (USB-A connector) of the
Hub’s integrated device cable into an open USB port
on your computer. If your computer is on, the Hub
will automatically be detected and configured. If your
computer is off, turn it on for the Hub to be detected
and configured.
Step 2: Attach your USB devices to the Hub to begin
use. In some cases, you may be prompted to reinstall
drivers for your devices. Complete the install wizard with
default options, or use the installation CD for your
USB devices.
Australia: 1800 235 546
© 2008 Belkin International, Inc. All rights
reserved. All trade names are registered
trademarks of respective manufacturers
listed. iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
New Zealand: 0800 235 546
Singapore: 65 64857620
PM01390
F4U006-XXX
|