RELEASE NOTE FOR ROUTER F5D5231-4, FIRMWARE 1.00.000
DATE: APRIL 16, 2003
These release notes describe features and caveats. The main code module for this release is compatible and
downloadable into the switch over the network using the TFTP protocol. Please refer to the Installation and User
Guide for a detailed description of the download procedure.
Refer to the Belkin User Guide for information about using the embedded web management capability of the
switch.
This version of software F5D5231-4-v1.00.000-runtime.bin supports the following models of the F5D5231-x and
F5D6231-x product family:
?? F5D6231-3
KNOWN ISSUES
1. When User setting ussing access point only with user specified IP. This user manual setting ip will not
save to NV, but using default(192.168.2.254) as access point ip address
2. Using wireless encryption128bit mode will causing can’t get IP
RESOLVED ISSUES
PRE-RESOLVED ISSUES
LIMITATION & RESTRICTIONS:
APPROVED BY:
Submitted By:
Date
Date
Date
Product Manager
Technical Support
There are 2 types of firmware release, formal and engineering beta test version.
Formal version:
X.Y0
X: number from 1,
Y: 0 - 9
Example: V1.00, and V1.10
Engineering Beta and Test version:
X.YZE X: number from 0,
Y: 0 – 9 Z: 0 - 9
Example: V0.01E, V1.02E, or V1.14E
NOVEMBER 31, 2001
CONFIDENTIAL
PAGE 1 OF 3
|