LP50-RD-10PK
LP50-RD-25PK
Locking Pin for TAA-Compliant 3-Series Patch Cables
Lock down critical network ports on
your 3-Series lockable patch cables.
Insert the optional Locking Pin into the
patented locking boot to lock down ports.
Overview
Unlike traditional patch cables, TAA-compliant
GigaTrue 3 CAT6 and CAT6A Patch Cables can
provide a level of security directly at the port.
What’s Included: (1) 10-Pack or 25-Pack
Locking Pins
Figure 1. Insert the
red locking clip.
Installing the Pin
To lock the cable, first insert the cable into the
port. Then insert the red Locking Pin all the
way into the built-in locking tab on the cable
boot. See Figure 1.
Removing the Pin
Figure 2. Insert tool tip
under Locking.
Insert the tip of the
Removal Tool under the
Locking Pin.
© Copyright 2013. Black Box Corporation. All
rights reserved. Printed in U.S.A. Black Box® and
the Double Diamond logo are registered
trademarks of BB Technologies, Inc. Any third-
party trademarks appearing in this publication
are acknowledged to be the property of their
respective owners.
Figure 3. Release the tool
from the clip.
Gently pull back the
Locking Pin. Lift up the
Tool to release it from
the Locking Pin.
Locking Pins for TAA-Compliant GigaTrue® 3 Patch
Cables, Slimline, Lockable, version 2
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500
or fax 724-746-0746, Mailing address: Black Box Corporation, 1000 Park Drive,
E-mail: [email protected]
|