SP077A
In-Line Surge Protector, PoE, Mode B (RJ-45 8-Wire)
Get convenient in-line surge protection for access
points on your wireless Ethernet network.
Put avalanche diode and thyristor protection
where you need it.
Specifications
Application: PoE (Mode B)
Ground Wire: Yes
Maximum Shunt Capacitance: <25 pF (Ethernet lines only)
Overview
Peak Pulse Current: Pins 1, 2, 3, and 6: 132 amps;
This in-line surge protector protects data lines against both
line-to-line and ground-to-line surges. It also protects wireless
access points that are typically installed in remote locations,
which is important because the remote access points may
expose devices to severe transients and surges.
Pins 4, 5, 7, and 8: 103 amps
Pins Protected: All
Protection Type: Avalanche diode and thyristor technology
Response Time: <5 ns
What’s included
Standard Clamping Voltage: Pins 1, 2, 3, and 6: 7.5 volts;
Pins 4, 5, 7, and 8: 30 volts
• In-Line Surge Protector
• 6" RJ-45 patch cable
• This specification sheet
Connectors: (2) RJ-45 F
For installation instructions, turn this page over…
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
Support
Information
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
|