AC1056A-2
AC1056A-4
AC1056A-8
Compact Video Splitters
Broadcast a crisp, clear VGA signal from one PC
to two, four, or eight VGA monitors.
Use for trade shows, training, even public information systems.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
call 724-746-5500) FREE technical support 24 hours a day, 7 days
a week: Call 724-746-5500 or fax 724-746-0746 Mailing address:
Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
•
E-mail: [email protected]
NOM Statement
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca
de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que
sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquea la ventilación, no se debe colocar
en libreros o gabinetes que impidan el flujo de aire por los orificios de
ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del
tipo descrito en el instructivo de operación, o como se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización
del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen del
aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas
de energia.
724-746-5500
|
blackbox.com
Page 3
NOM Statement
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea
usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
Page 4
724-746-5500
|
blackbox.com
Trademarks Used in this Manual
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.
724-746-5500
|
blackbox.com
Page 5
Table of Contents
Table of Contents
1. Specifications.......................................................................................................7
2. Overview..............................................................................................................8
2.1 Introduction.................................................................................................8
2.2 What’s Included...........................................................................................8
2.3 Hardware Description..................................................................................9
2.3.1 AC1056A-2........................................................................................9
2.3.2 AC1056A-4 .....................................................................................10
2.3.3 AC1056A-8 .....................................................................................11
3. Installation.........................................................................................................13
4. Operation ..........................................................................................................14
Appendix: Troubleshooting.....................................................................................15
A.1 Contacting Black Box..............................................................................15
A.2 Shipping and Packaging..........................................................................15
Page 6
724-746-5500
|
blackbox.com
Chapter 1: Specifications
1. Specifications
Number of VGA Outputs — AC1056A-2: (2);
AC1056A-4: (4);
AC1056A-8: (8)
Signal Bandwidth — AC1056A-2, AC1056A-4: 350 MHz;
AC1056A-8: 300 MHz
Signal Type — VGA, SVGA, Multi-sync
Cable Length — AC1056A-2: (1) 5-ft. (1.5-m) input cable, (1) 10-ft. (3-m) output
cable;
AC1056A-4: (1) 5-ft. (1.5-m) input cable, (3) 10-ft. (3-m) output cables;
AC1056A-8: (1) 5-ft. (1.5-m) input cable, (7) 10-ft. (3-m) output cables;
NOTE: Or, you can use up to 210 feet (64 m) maximum cable length of user-supplied
output cable.
Connectors — AC1056A-2: Input: (1) HD15 female,
Output: (2) HD15 female;
AC1056A-4: Input: (1) HD15 female,
Output: (4) HD15 female;
AC1056A-8: Input: (1) HD15 female,
Output: (8) HD15 female
Indicators — (2) LEDs: (1) Power, (1) Active
Power — Input: 100–240 VAC, 50/60 Hz autosensing inline power supply;
Output: 5 VDC, 2A
Size — AC1056A-2: 0.9"H x 3.3"W x 2.7"D (2.3 x 8.4 x 6.9 cm);
AC1056A-4: 1.6"H x 3.3"W x 2.7"D (4.1 x 8.4 x 6.9 cm);
AC1056A-8: 1.7"H x 7.8"W x 3"D (10.7 x 19.8 x 7.6 cm)
Weight — AC1056A-2: 0.4 lb. (0.2 kg);
AC1056A-4: 0.6 lb. (0.3 kg);
AC1056A-8: 1.3 lb. (0.6 kg)
724-746-5500
|
blackbox.com
Page 7
Chapter 2: Overview
2. Overview
2.1 Introduction
The Compact Video Splitter (2-, 4-, or 8-port) broadcasts and boosts one VGA
signal source to 2, 4, or 8 VGA monitors. Use it for presentations, exhibits,
demonstrations, trade shows, monitor testing, or business meetings.
There’s no software or interface card to install. Simply connect the cables, power on
the splitter, and you’re ready to transmit one VGA image to multiple monitors with
excellent quality. A high-bandwidth circuit enables a high-resolution, 350-MHz VGA
signal to display on 2 or 4 monitors, or a 300-MHz signal to display on 8 monitors.
The maximum distance between the VGA input source and the output can be
up to 210 feet (64 m). (For distances longer than 10 feet [3 m], you must supply
the output cables.) The splitter works with VGA, SVGA, and multisync monitors to
provide crisp, clear VGA images. Cascade splitters for more VGA outputs. (Call Tech
Support for details.) If the VGA input is lost, the splitter automatically saves power.
2.2 What’s Included
Your package should contain the following items. If anything is missing or damaged,
contact Black Box at 724-746-5500 or [email protected].
Your package should include the following items:
• (1) AC1056A-2*, AC1056A-4**, or AC1056A-8*** unit
• (1) power supply (special P/N VMVA314792)
• (1) power cord
• (4) rubber feet
• (1) 5-ft. (1.5-m) input cable (HD15 male to HD15 male, part number
EVNPS06-0005-MM)
• (1) user manual
*AC1056A-2 also includes (1) HD15 male to HD15 female 10-ft. (3-m) cable
(EVNPS06-0010-MF)
**AC1056A-4 also includes (3) HD15 male to HD15 female 10-ft. (3-m) cables
(EVNPS06-0010-MF)
***AC1056A-8 also includes (7) HD15 male to HD15 female 10-ft. (3-m) cables
(EVNPS06-0010-MF)
Page 8
724-746-5500
|
blackbox.com
Chapter 2: Overview
2.3 Hardware Description
2.3.1 AC1056A-2
Figures 2-1 and 2-2 show the front and back panels of the AC1056A-2. Table 2-1
describes its components.
2
5
Figure 2-1. AC1056A-2 front panel.
1
Figure 2-2. AC1056A-2 back panel.
Table 2-1. AC1056A-2 components.
Component
Description
Outputs
Input
1
2
(2) HD15 connectors
(1) HD15 connector
Power LED (not shown,
on top of unit)
Lights when the splitter is powered by
the 5-VDC power adapter
3
Active LED (not shown,
on top of unit)
Lights when there is a VGA signal at the
input port
4
5
5-VDC power connector Links to a 5-VDC power adapter
724-746-5500
|
blackbox.com
Page 9
Chapter 2: Overview
2.3.2 AC1056A-4
Figures 2-3 and 2-4 show the front and back panels of the AC1056A-4. Table 2-2
describes its components.
2
5
Figure 2-3. AC1056A-4 front panel.
1
1
1
1
Figure 2-4. AC1056A-4 back panel.
Page 10
724-746-5500
|
blackbox.com
Chapter 2: Overview
Table 2-2. AC1056A-4 components.
Component
Description
1
2
(4) HD15 connectors
Outputs
(1) HD15 connector
Input
Power LED (not shown,
on top of unit)
Lights when the splitter is powered by
the 5-VDC power adapter
3
Active LED (not shown,
on top of unit)
Lights when there is a VGA signal at the
input port
4
5
5-VDC power connector Links to a 5-VDC power adapter
2.3.3 AC1056A-8
Figures 2-5 and 2-6 show the front and back panels of the AC1056A-8. Table 2-3
describes its components.
4
3
Figure 2-5. AC1056A-8 front panel.
724-746-5500
|
blackbox.com
Page 11
Chapter 2: Overview
1
2
5
1
Figure 2-6 AC1056A-8 back panel.
Table 2-3. AC1056A-8 components.
Component
Description
(8) HD15 connectors
(on back of unit)
1
2
3
4
5
Outputs
(1) HD15 connector (on
back of unit)
Input
Power LED (on front
of unit)
Lights when the splitter is powered by
the 5-VDC power adapter.
Active LED (on front
of unit)
Lights when there is a VGA signal at the
input port
5-VDC power connector
(on back of unit)
Links to a 5-VDC power adapter
Page 12
724-746-5500
|
blackbox.com
Chapter 3: Installation
3. Installation
1. For the 2-port model (AC1056A-2), you’ll need two HD15 male-to-male output
cables (one of these cables is included). You’ll also need one input cable (includ-
ed).
For the 4-port model (AC1056A-4), you’ll need four output cables (three of these
cables are included) and one input cable (included).
For the 8-port model (AC1056A-8), you’ll need eight output cables (seven of
these cables are included) and one input cable (included).
Connect multiple monitors to the video splitter’s output connectors as shown in
Figure 3-1.
NOTE: If you want to use the Compact Video Splitter’s Display Data Channel (DDC)
feature, you must have a monitor on Port 1. If you have additional monitors
on other ports with higher resolutions, they will only support the resolution
of the monitor on Port 1.
VGA outputs to computers
Compact Video Splitter,
8-Port (AC1056A-8)
VGA outputs to computers
VGA input
Figure 3-1. Compact Video Splitter, 8-Port (AC1056A-8) connection.
724-746-5500
|
blackbox.com
Page 13
Chapter 3: Installation/Chapter 4: Operation
2. You’ll also need to connect the Compact Video Splitter’s input connector to the
VGA source. Use an HD15 male-to-male cable (included) for this connection.
3. Connect the included power supply cord’s barrel connector to the barrel
connector receptacle on the Compact Video Splitter. Then plug the other end
of the power cord into an AC outlet.
4. Operation
Once the Compact Video Splitter is installed, it operates unattended. The splitter has
two front-panel LEDs that indicate its status at a glance.
• The Active LED lights when there is a VGA signal at the input port.
• The Power LED lights when the Compact Video Splitter is powered by the 5-VDC
power adapter.
Page 14
724-746-5500
|
blackbox.com
Appendix: Troubleshooting
Appendix. Troubleshooting
A.1 Contacting Black Box
If you determine that your Compact Video Splitter is malfunctioning, do not attempt
to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box at
724-746-5500 or [email protected].
Before you do, make a record of the history of the problem. We will be able to
provide more efficient and accurate assistance if you have a complete description,
including:
• the nature and duration of the problem.
• when the problem occurs.
• the components involved in the problem.
• any particular application that, when used, appears to create the problem or make
it worse.
A.2 Shipping and Packaging
If you need to transport or ship your Compact Video Splitter:
• Package it carefully. We recommend that you use the original container.
• If you are shipping the Compact Video Splitter for repair, make sure you include
everything that came in the original package. Before you ship, contact Black Box
to get a Return Authorization (RA) number.
724-746-5500
|
blackbox.com
Page 15
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away
at 724-746-5500 or blackbox.com.
About Black Box
Black Box provides an extensive range of networking and infrastructure products.
You’ll find everything from cabinets and racks and power and surge protection
products to media converters and Ethernet switches all supported by free, live 24/7
Tech support available in 30 seconds or less.
© Copyright 2011. Black Box Corporation. All rights reserved.
AC1056A-2, version 2
724-746-5500
|
blackbox.com
|