Radio / CD
Miami CD72
Orlando CD72
Montreal CD73
US version
7 642 800 310
7 642 802 310
7 643 811 310
Operating instructions
4
3
2
1
6
5
12
11
10
9
8
7
3
CONTROLS
9
AUDIO button, to adjust the
bass, treble, balance, fader and
loudness (short press) and oper-
ate the volume mute feature
(long press)
1
Button, to switch the unit on/off,
adjust the volume
2
Button, to unlock the remov-
able control panel (release pan-
el)
:
;
Display
3
4
NEXT button to display the other
pages in a menu and to switch
to a different memory bank in ra-
dio mode
SOURCE button to start CD
playback / CD-changer playback
or Compact Drive MP3 (only if
connected)
Softkeys: the function of the soft-
keys depends on the current dis-
play content
or
To play an external audio source
(only if connected)
5
6
DEQ+ button, to open the equal-
izer menu
<
TUNER button, to activate radio
mode and open the radio func-
tions menu (only possible in ra-
dio mode)
button, to open the flip-re-
lease control panel
7
8
Joystick
MENU button, to open the basic
settings menu
4
CONTENTS
Programme type (PTY) .................. 17
Optimising radio reception............. 18
Setting the radiotext display ........... 18
Notes and accessories ............ 6
Road and traffic safety ..................... 6
Safety information............................ 6
Installation ....................................... 6
Accessories .................................... 6
CD mode ................................ 19
Switching to CD mode and
inserting a CD ............................... 19
Removing a CD ............................. 19
Selecting tracks ............................ 19
Fast searching (audible) ................ 20
Random track play (MIX) ............... 20
Repeating tracks (REPEAT) ........... 20
Displaying CD text......................... 20
Setting scrolling text ...................... 20
Removable control panel ......... 7
Switching on/off ...................... 8
Adjusting the volume ............... 9
Sound and volume
distribution settings ............... 11
Adjusting the bass ......................... 11
Adjusting the treble ....................... 11
X-BASS ........................................ 11 CD changer mode (optional) . 21
Adjusting the right/left volume
Switching to CD changer mode..... 21
Selecting CDs............................... 21
Selecting tracks ............................ 21
Fast searching (audible) ................ 21
Repeating individual tracks or
whole CDs (REPEAT).................... 22
Random track play (MIX) ............... 22
Naming CDs ................................. 22
distribution (balance) ..................... 11
Adjusting the front/back volume
distribution (fader) ......................... 12
Adjusting the display.............. 12
Adjusting the viewing angle ........... 12
Adjusting the display brightness..... 12
Setting the button illumination
colour............................................ 13 CLOCK - Time ........................ 24
Setting the level display ................. 13
Equalizer ................................ 24
Radio mode............................ 14
Preamplifier............................ 28
Setting the tuner............................ 14
External audio sources .......... 28
Specifications ........................ 29
Switching to radio mode ................ 14
RDS function................................. 14
Selecting the waveband /
memory bank................................. 15
Tuning into a station....................... 15
Setting the sensitivity of station
seek tuning.................................... 16
Storing stations ............................. 16
Storing stations automatically
(Travelstore) .................................. 16
Listening to stored stations ............ 16
5
NOTES AND ACCESSORIES
Installation
Notes and accessories
If you want to install your car radio your-
self, please read the installation and
connection instructions that follow these
operating instructions.
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Please read these operating instruc-
tions before using the equipment for
the first time.
Accessories
Only use accessories approved by Blau-
punkt.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the telephone numbers printed
at the back of this booklet.
Remote control
The RC 08, RC 10 or RC 10H remote
controls (available as optional accesso-
ries) allow you to safely and convenient-
ly access the main functions of your car
radio.
Amplifier
Road and traffic safety
All Blaupunkt amplifiers can be used.
Road and traffic safety have ab-
solute priority. Only operate your car
radio if the road and traffic conditions
allow you to do so. Familiarise your-
self with the device before setting off
on your journey.
Calibration microphone
You can use the calibration microphone
(available as an accessory) for the
equalizer’s automatic sound calibration
feature.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to at a reasonable level.
CD changer
The following CD changers can be ob-
tained from accessory retailers for con-
nection with this device: CDCA02, CDC
A 08, CDC A 072 und IDC A 09.
You can also connect the CDC A 071
CD-changer by using an adapter cable
(Blaupunkt no.: 7 607 889 093).
Safety information
The car radio and the device's
control panel (flip-release panel) heat
up during use. Therefore, when re-
moving the flip-release panel, only
hold it by its non-metallic surfaces.
Allow the car radio to cool down first
if you want to uninstall the whole unit.
6
NOTES AND ACCESSORIES
THEFT PROTECTION
Removable control panel
Theft protection
As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (flip-release
panel). Without this control panel, the
car radio is worthless to a thief.
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nect a Compact Drive MP3, you will first
need to use a computer to store the MP3
music tracks on the Microdrive(tm) hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connected to the car radio, you can play
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
Protect your equipment against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
The control panel has been designed
to be easy to use.
Note:
● Never drop the control panel.
● Never expose the control panel to
direct sunlight or other heat sourc-
es.
● Store the control panel in the sup-
plied case.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth soaked in alcohol.
Detaching the control panel
2
7
THEFT PROTECTION
SWITCHING ON/OFF
● Press the
button 2.
Switching on/off
The control panel latch mechanism
opens.
There are various ways of switching the
unit on/off.
● First, pull the control panel straight
off the unit and then out towards
the left. (For further details, read
the safety information in the “Notes
and accessories” chapter)!
Switching on/off using button
1
● To switch the unit on, press button
1 until you feel the latch open and
the button pushes out.
The unit switches on.
● The unit switches off after the con-
trol panel is removed.
● To switch the unit off, press button
1 until you feel it click into place.
● All the current settings are saved.
The unit switches off.
● Any CD already inserted in the unit
remains there.
Switching on/off using the
vehicle ignition
Attaching the control panel
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 1, it will
switch on/off simultaneously with the
ignition.
● Slide the control panel from left to
right into the unit’s guide.
● Press the left-hand edge of the
control panel into the unit until it
clicks into place.
You can switch the unit on even if the
ignition is off.
● To do so, press button 1 so that
you feel it unlatch and push out.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
Note:
● When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated when the panel
is replaced.
8
ADJUSTING THE VOLUME
Activating mute
Adjusting the volume
This feature allows you to instanta-
neously reduce the volume (mute).
The volume can be adjusted in stages
from 0 (off) to 50 (maximum).
● Press the AUDIO button 9 for
● To increase the volume, turn the
volume control 1 to the right.
longer than two seconds
“MUTE” appears in the display.
● To decrease the volume, turn the
volume control 1 to the left.
Cancelling mute
Setting the power-on volume
You can set the unit’s default power-on
● Briefly press the AUDIO button 9.
or
volume.
● turn the volume control 1.
● Press the MENU button 8.
Telephone audio / navigation
audio
● Press the softkey 4 assigned to
the “VOL” display item.
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
● Press the softkey 4 assigned to
the “ON” display item.
● Set the required volume using the
volume control 1.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Note:
To avoid damage to your hearing, the
power-on volume is limited to a value
of “40”.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
You can set the volume level at which
telephone calls and the navigation voice
output will be heard.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “VOL” display item.
9
ADJUSTING THE VOLUME
● Press the softkey 4 that is as-
signed to the “TEL” display item for
the telephone volume or “NAVI”
display item for the voice output.
Automatic sound
This feature automatically adjusts the
volume of the car radio to suit the speed
at which the vehicle is travelling. In or-
der for this to work, your car radio must
be connected in the manner described
in the installation instructions.
● Set the required volume using the
volume control 1.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The automatic volume boost can be set
to six levels (0-5). “0” means no boost
and “5” means maximum boost.
The settings are saved.
● Press the MENU button 8.
Note:
● Press the softkey 4 assigned to
the “VOL” display item.
You can also adjust the volume during
the telephone call using the volume con-
trol 1.
● Press the softkey 4 assigned to
the “AUTO” display item.
● Set the boost level using the joy-
stick 7.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Note:
The optimum setting for the speed-re-
lated sound adjustment feature de-
pends on how noise levels develop in
your particular vehicle. You will need to
test various settings in order to find out
which is best suited to your vehicle.
10
SOUND AND VOLUME DISTRIBUTION SETTINGS
X-BASS
Sound and volume
distribution settings
The X-BASS feature can be used to
aurally compensate the bass at low vol-
ume levels. The X-BASS boost can be
set in steps ranging from 0 (off) to 6
(max). If X-BASS is activated, the con-
figured X-BASS boost level will be dis-
play alongside the X-BASS symbol in
the display.
Note:
You can adjust the bass, treble and X-
BASS individually for each audio
source.
Adjusting the bass
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● Press the softkey 4 assigned to
the “BASS” display item.
● Press the softkey 4 assigned to
the “X-BASS” display item.
● Move the joystick 7 up or right to
boost the bass or move it down or
left to reduce the bass.
● Move the joystick 7 up or right to
boost the X-BASS or move it down
or left to reduce the X-BASS.
When you have finished making your
changes,
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
● press the joystick OK 7 or the
AUDIO button 9.
Adjusting the treble
Adjusting the right/left volume
distribution (balance)
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● To adjust the balance, press the
AUDIO button 9.
● Press the softkey 4 assigned to
the “TREB” display item.
“AUDIO 1” appears in the display.
● Move the joystick 7 up or right to
boost the treble or move it down or
left to reduce the treble.
● Press the softkey 4 assigned to
the “BAL” display item.
● Move the joystick 7 up/right or
down/left to adjust the right/left vol-
ume distribution.
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
11
VOLUME DISTRIBUTION ADJUSTING THE DISPLAY
Adjusting the front/back volume
distribution (fader)
Adjusting the display
You can adjust the display to suit the
installation position in your vehicle and
your own preferences.
● To adjust the fader, press the AU-
DIO button 9.
“AUDIO 1” appears in the display.
Adjusting the viewing angle
● Press the softkey 4 assigned to
the “FADE” display item.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
● Move the joystick 7 up/right or
down/left to adjust the front/back
volume distribution.
● Press the softkey 4 assigned to
the “ANGL” display item.
When you have finished making your
changes,
● Move the joystick 7 up/right or
down/left to adjust the viewing an-
gle.
● press the joystick OK 7 or the
AUDIO button 9.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Adjusting the display brightness
If your car radio has been connected
as described in the installation instruc-
tions, the display brightness will switch
over when the headlights are turned on/
off. The display brightness can be ad-
justed separately for night and day in
steps ranging from 1-6. We recommend
setting “6”.
Daytime display brightness
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
● Press the softkey 4 assigned to
the “DAY” display item.
12
ADJUSTING THE DISPLAY
● Move the joystick 7 up/right or
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
down/left to adjust the brightness.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Setting the level display
The settings are saved.
The level display briefly provides a sym-
bolic display of the volume, the sound
control settings and the equalizer set-
tings whilst you are making your chang-
es.
Night-time display brightness
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
When you are not changing any set-
tings, the level display can display the
car radio’s output level. You can also
switch off the level display and have the
current volume level displayed continu-
ously.
● Press the softkey 4 assigned to
the “NGHT” display item.
● Move the joystick 7 up/right or
down/left to adjust the brightness.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
Switching the level display on/off
● Press the MENU button 8.
The settings are saved.
● Press the softkey 4 assigned to
the “DISP” display item.
Setting the button illumination
colour
The colour of the device’s button illumi-
nation can be adjusted (only the soft-
key colours can be changed on the Mi-
ami CD72). Choose between “COLOR
1” or “COLOR 2”.
● Keep pressing the softkey 4 as-
signed to the “EQ” display item un-
til the required setting “EQ DISP
OFF” or “EQ DISP ON” appears.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
● Press the MENU button 8.
The settings are saved.
● Press the softkey 4 assigned to
the “DISP” display item.
● Keep pressing the softkey 4 as-
signed to the “KEYS” display item
until the required colour (“COLOR
1” or “COLOR 2”) appears in the
display.
13
RADIO MODE
Radio mode
The main radio menu for tuning into a
station is displayed. The radio mode
functions are controlled in the radio func-
tions menu. You can open the radio
functions menu by pressing the TUN-
ER button < in radio mode again. If
you are in any other mode, you can
open the radio functions menu by press-
ing the MENU button 8 followed by the
softkey 4 that is assigned to the
“TUNE” display item.
Setting the tuner
To ensure that the tuner works proper-
ly, the device must be configured for
your region. You can choose between
Europe and the USA. By default, the
tuner is set to the region in which the
device was sold. If you experience prob-
lems with radio reception, please check
these settings.
● Press the MENU button 8.
RDS function
This unit is equipped with an RDS radio
receiver. Some of the receivable FM
stations transmit a signal that not only
carries the programme but also addi-
tional information such as the station
name and programme type (PTY). The
station name appears in the display if
the radio can received it and the RDS
function is activated. You can optionally
display the programme type. For further
details, please read the section entitled
“Programme type (PTY)”.
● Press the softkey 4 assigned to
the “SETP” display item.
● Press the softkey 4 assigned to
the “AREA” display item.
● Press the softkey 4 assigned to
the display item of the region that
you require: “EURO” or “USA”.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Switching the RDS function on/off
Switching to radio mode
To use the RDS function,
If the device is in CD mode, cassette
mode, Multi-Media Card (MMC) mode
(depending on the car radio’s equip-
● press the TUNER button < in ra-
dio mode.
ment) or CD changer/Compact Drive The radio functions menu appears in the
MP3 mode,
display.
● press the TUNER button <.
● Press the softkey 4 assigned to
the “RDS” display item.
“RDS ON” or “RDS OFF” appears briefly
in the display.
14
RADIO MODE
To return to the main radio menu,
Selecting the memory bank
To switch between the FM memory
banks (FM1, FM2, FM3 and FMT) or
AM memory banks (AM1, AM2 and
AMT),
● press the TUNER button < or the
joystick OK 7. The settings are
saved.
Selecting the waveband /
memory bank
● select the required FM or AM
waveband.
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are four memory banks
(FM1, FM2, FM3 and FMT) for the FM
waveband and three memory banks
(AM1, AM2 andAMT) for theAM wave-
band. Six stations can be stored in each
memory bank.
● Repeatedly press the NEXT button
3 until the required memory bank
appears in the display.
The memory banks are accessed in the
following order: FM1, FM2, FM3, FMT
or AM1, AM2, AMT.
Tuning into a station
There are various ways of tuning into a
station.
Selecting the waveband
To select the FM or AM waveband,
● press the TUNER button < in ra-
Automatic seek tuning
dio mode.
● Move the joystick 7 down or up.
The unit tunes into the next receivable
station.
The radio functions menu appears in the
display.
● Press the softkey 4 assigned to
the “BAND” display item.
Tuning into stations manually
You can also tune into stations manual-
ly.
● Press the softkey 4 assigned to
the “FM” display item for the FM
waveband.
● Move the joystick 7 left or right.
● Press the softkey 4 assigned to
the “AM” display item for the AM
waveband.
Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS func-
tion is deactivated.
The main radio menu for the selected
waveband appears.
15
RADIO MODE
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
● Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
● press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the FMT or AMT memory bank.
display.
Note:
● Press the NEXT button 3.
Any stations that were previously stored
in this memory bank are deleted in the
process.
● Press the softkey 4 assigned to
the “SENS” display item.
The display shows the currently set sen-
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
Starting the Travelstore function
● press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
● Move the joystick 7 up/right or
● Press the softkey 4 assigned to
the “TS” display item.
down/left to adjust the sensitivity.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The station storing procedure begins.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in location 1 of the FMT or
AMT memory bank will be played.
The settings are saved.
Storing stations
Listening to stored stations
Storing stations manually
● Select the memory bank or wave-
● Select the required memory bank.
band.
● Tune into the required station as
described in the section entitled
“Tuning into a station”.
● Press the softkey 4 that is as-
signed to the name or frequency of
the station that you want to listen
to.
16
RADIO MODE
Selecting a programme type and
starting seek tuning
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your radio can receive
and display this information. For exam-
ple, the programme types can be:
The PTY menu is made up of several
pages on which the known programme
types are displayed. To browse through
the PTY menu’s pages,
● repeatedly press the NEXT button
3 until the required programme
type appears alongside one of the
softkeys.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
CLASSICS
● Press the softkey 4 assigned to
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
the required programme type.
● Move the joystick 7 up/right or
down/left to start seek tuning.
Activating PTY
The next receivable station correspond-
ing to your selected programme type will
then be tuned into. If no station is found
that corresponds to the selected pro-
gramme type, you will hear a beep and
“NO PTY” appears briefly in the display.
The radio will then retune to the station
that was received last.
To use the PTY function,
● press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
● Press the softkey 4 assigned to
the “PTY” display item.
Note:
When PTY is activated, the display
shows the current programme type. The
programme types are displayed along-
side the softkeys 4.
If you want to switch back to the pro-
gramme types display,
● briefly move the joystick 7 in any
direction.
Cancelling PTY
To cancel the PTY function,
● Whilst the programme types are
being displayed, press the softkey
4 assigned to the “OFF” display
item.
17
RADIO MODE
Optimising radio reception
Setting the radiotext display
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
diotexts. You can allow radiotexts to be
displayed or you can block them.
Treble reduction feature during
interference (HICUT)
The HICUT function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
● press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
Activating HICUT
● Press the NEXT button 3.
The “second page” of the radio func-
tions menu is displayed.
● press the TUNER button < in ra-
dio mode.
The first page of the radio functions
menu is displayed.
● Press the softkey 4 assigned to
the “RTXT” display item.
● Press the NEXT button 3.
“RTXT ON” or “RTXT OFF” appears
briefly in the display.
● Press the softkey 4 assigned to
the “HCUT” display item.
● Press the TUNER button < or the
joystick OK 7. The settings are
saved.
● Move the joystick 7 up/right or
down/left to adjust the HiCut.
“HICUT 0” equates to the lowest reduc-
tion of the interference level, “HICUT 3”
is the highest reduction.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
18
CD MODE
You must not hinder or assist the drive
as it draws in the CD.
CD mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
The control panel closes automatically.
The CD menu appears and CD play-
back begins.
CD-Rs (CDs that you have “burned”
yourself) and CD-RWs can generally
also be played. Due to the varying qual-
ity of CDs, Blaupunkt cannot guaran-
tee that this will work properly.
● If a CD is already inserted in the
unit,
● keep pressing the SOURCE button
; until CD mode is displayed.
To ensure the system functions proper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
perienced when trying to play copy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
The CD menu appears and playback
begins from the point at which it was
last interrupted.
Removing a CD
● press the
button 6.
Risk of severe damage to the
CD drive!
The control panel opens out towards
you and the CD is ejected.
CD singles with a diameter of 8 cm
and non-circular contoured CDs
(shape CDs) must not be used.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
● Carefully remove the CD.
● Press the
button 6.
The control panel closes.
Selecting tracks
● Move the joystick 7 in one direc-
tion (up and right for the next track
or down and left for the previous
track) until the number of the re-
quired track appears in the display.
Switching to CD mode and
inserting a CD
● If there is no CD inserted in the unit
yet,
If you press the joystick 7 downwards
once or to the left once, the current track
will be played again from the beginning.
● press the
button 6.
The control panel opens out towards
you.
● Insert the CD with the printed side
uppermost into the CD compart-
ment.
The CD is drawn into the drive.
19
CD MODE
Fast searching (audible)
Displaying CD text
To fast search backwards or forwards, Some CDs include CD text. The CD text
may contain the names of the artist, the
album and track.
● Press and hold the joystick 7 in
one direction (up and right for the
You can allow the CD text to be dis-
played as scrolling text every time you
switch to another track. After the whole
CD text has been shown once, the
name of the track is displayed. If the
inserted CD does not contain any CD
text, “NO TEXT” will briefly appear in
the display if the CD text feature is acti-
vated.
next track or down and left for the
previous track) until fast searching
backwards/forwards begins.
Random track play (MIX)
● Press the softkey 4 assigned to
the “MIX” display item.
“MIX ON” appears briefly in the display.
The next track to be played will be
picked at random.
Activating CD text
● Press the softkey 4 assigned to
the “TAG” display item.
Cancelling MIX
● Press the softkey 4 assigned to
the “MIX” display item again.
Deactivating CD text
“MIX OFF” appears briefly in the dis-
play.
● Press the softkey 4 assigned to
the “TAG” display item again.
Repeating tracks (REPEAT)
Setting scrolling text
● Press the softkey 4 assigned to
the “RPT” display item.
You can display the contents of the main
display area as scrolling text.
“REPEATON” appears briefly in the dis-
play. The track is repeated until you
deactivate RPT.
Activating CD scrolling text
● Press the softkey 4 assigned to
the “SCRL” display item.
Cancelling REPEAT
“SCROLL ON” appears briefly in the
● Press the softkey 4 assigned to
the “RPT” display item again.
display.
Deactivating CD scrolling text
“REPEAT OFF” appears briefly in the
display. Normal playback is then re-
sumed.
● Press the softkey 4 assigned to
the “SCRL” display item again.
“SCROLL OFF” appears briefly in the
display.
20
CD CHANGER MODE
Selecting CDs
To move up or down to another CD,
CD changer mode
(optional)
● press the softkey 4 assigned to
the display item of the CD (CD1 –
CD10) that you require. To do so,
you might need to switch to the
“second page” of the main CD-
changer menu using the NEXT but-
ton 3.
To find out which CD changers / Com-
pact Drive can be used with this unit,
please refer to the "Accessories" chap-
ter in these instructions or contact your
Blaupunkt dealer.
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
or
be found in the operating instructions ● keep pressing the joystick 7 up or
supplied with your CD changer.
down until the number of the re-
quired CD appears in the display.
Information on using the Compact Drive
MP3 and recording music tracks onto it
can be found in the operating instruc-
tions supplied with the Compact Drive
MP3.
Selecting tracks
To move down or up to another track
on the current CD,
● repeatedly press the joystick 7 to
the left or right until the number of
the required track appears in the
display.
Switching to CD changer mode
● Keep pressing the SOURCE but-
ton ; until CD changer mode is
displayed.
If you press the joystick 7 once to the
left, the current track will be played again
from the beginning.
Playback continues from the point at
which it was last interrupted. If the mag-
azine was removed from the CD chang-
er and then replaced, the CD magazine
Fast searching (audible)
will first be scanned, and playback will To fast search backwards or forwards,
begin from the first track on the first CD
that the CD changer detects.
● press and hold the joystick 7 to
the left or right until fast searching
backwards / forwards begins.
21
CD CHANGER MODE
To play the all the tracks on all inserted
CDs in random order,
Repeating individual tracks or
whole CDs (REPEAT)
● press the softkey 4 assigned to
the “MIX” display item again.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
“MIX ALL” appears in the display.
Note:
The CD changer functions menu opens.
In the case of the CDC A 08 and the
IDC A 09, all the CDs and all the tracks
in the changer are picked randomly. In
the case of any other changer, all the
tracks on one CD are played randomly
first before the next CD in the changer
is played.
● Press the softkey 4 assigned to
the “RPT” display item.
“RPT TRCK” appears briefly in the dis-
play.
To repeat the whole CD,
● press the softkey 4 assigned to
the “RPT” display item again.
Cancelling MIX
“RPT CD” appears briefly in the display.
To cancel MIX,
Cancelling REPEAT
● keep pressing the softkey 4 that
is assigned to the “MIX” display
item until “MIX OFF” appears brief-
ly in the display.
To stop the current track or current CD
from being repeated,
● keep pressing the softkey 4 that
is assigned to the “RPT” display
item until “RPT OFF” appears brief-
ly in the display.
Naming CDs
The car radio allows you to assign
names for up to 99 CDs (not with the
Compact Drive MP3) so that you can
recognise them more easily. The names
can be a maximum of eight characters
long.
Random track play (MIX)
To play the tracks on the current CD in
random order,
● Press the MENU button 8.
If you try assigning more than 99 names,
“FULL” will appear in the display.
● Press the softkey 4 assigned to
the “CDC” display item.
Entering / editing CD names
The CD changer functions menu opens.
● Listen to the CD that you want to
● Press the softkey 4 assigned to
the “MIX” display item.
name.
● Press the MENU button 8.
“MIX CD” appears in the display.
● Press the softkey 4 assigned to
the “CDC” display item.
The CD changer functions menu opens.
22
CD CHANGER MODE
● Press the softkey 4 assigned to
the “NAME” display item.
● Move the joystick 7 to the left or
right to change the input position.
You will now enter edit mode. If your
chosen CD does not have a name yet,
eight underscores will appear in the dis-
play. The current input position flashes.
● Insert an underscore at every input
position.
● Press the softkey 4 assigned to
the “NAME” display item.
● Move the joystick 7 up or down to
select the character you want. If
you want an empty space, simply
select the underscore.
The CD name will be deleted.
Deleting all CD names
You can delete all the CD names stored
in the unit.
● Move the joystick 7 to the left or
right to change the input position.
● To delete all the CD names, press
the MENU button 8.
● To save a name, press the softkey
4 assigned to the “NAME” display
item.
● Press the softkey 4 assigned to
the “CDC” display item.
Deleting a CD name
● Press the softkey 4 assigned to
the “CLR” display item.
● Listen to the CD whose name you
“CDC CLEAR” appears in the display.
The process can take up to 45 seconds
depending on how many CD names
have been stored.
want to delete.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
Note:
● Press the softkey 4 assigned to
the “NAME” display item.
This function is not available for the
Compact Drive MP3. If you use this
function with the Compact Drive MP3,
“CDC CLEAR” is displayed for 45 sec-
onds. You will not be able operate the
unit whilst this is happening.
You will now enter edit mode. The name
of the CD appears in the display and
the current input position flashes.
● Move the joystick 7 up or down to
select the underscore character.
23
CLOCK - TIME
CLOCK - Time
Setting the clock
EQUALIZER
Equalizer
This unit is equipped with a digital sound
calibration feature (DSA – Digital Sound
Adjustment). It provides you with three
self-calibrating 5-band equalizers and
five sound presets.
● To set the time, press the MENU
button 8.
● Press the softkey 4 assigned to
the “VARI” display item.
The EQ1 - EQ3 equalizers can be cali-
brated automatically with the help of a
special calibration microphone. You can
obtain this microphone from your Blau-
punkt dealer. The automatically ascer-
tained values can also be adjusted
manually.
● Press the softkey 4 assigned to
the “CSET” display item.
The “CLOCK SET” menu appears.
● Press the softkey 4 assigned to
the “HOUR” display item.
Furthermore, you can also set the equal-
izer manually.
The hours flash on and off.
● Adjust the hours using the joystick
7.
The following bands are available:
● SUB LOW EQ 32 - 50 Hz
To adjust the minutes,
● LOW EQ
● MID EQ
63 - 250 Hz
● press the softkey 4 assigned to
the “MIN” display item.
315 - 1,250 Hz
● MID/HIGH EQ 1,600 - 6,300 Hz
● HIGH EQ 8,000 - 12,500 Hz
The minutes flash.
● Adjust the minutes using the joy-
stick 7.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
24
EQUALIZER
Note:
Switching the equalizer on/off
To switch the equalizer on/off,
● press the DEQ+ button 5.
The equalizer menu is displayed.
The sound radiating from the loud-
speakers must not be obstructed by any
objects. All the loudspeakers must be
connected. The microphone must be
connected to the unit.
To activate the equalizer,
To calibrate an equalizer,
● Press the softkey 4 assigned to
the “USER” or “PRE” display item
and select an equalizer.
● Press the DEQ+ button 5.
● Press the softkey 4 assigned to
the “USER” display item.
To deactivate the equalizer,
● Press the softkey 4 assigned to
the display item of the equalizer
that you want to configure.
● Press the softkey 4 assigned to
the “OFF” display item.
Automatically calibrating the
equalizer
● Press the softkey 4 assigned to
the “AUTO” display item.
You can electronically calibrate and You will hear a test sound, and calibra-
store values for three different situations. tion takes place.
EQ 1 for the driver only
EQ 2 for the driver and front
passenger
● Proceed as described for all the
equalizers.
Selecting an equalizer
EQ 3 for the front and rear occupants
After calibration has taken place or you
have finished making manual adjust-
ments,
Hold the calibration microphone (avail-
able as an accessory) in the appropri-
ate position whilst the calibration is tak-
ing place.
● press the DEQ+ button 5.
The position of the calibration micro-
phone for situation 1 (e.g. for the driver
alone) is at the height of the driver's
head.
● Press the softkey 4 assigned to
the “USER” display item.
● Select one of the equalizers “EQ1”,
“EQ2” or “EQ3” using the corre-
sponding softkeys 4.
For situation 2, the calibration micro-
phone is between the driver and pas-
senger.
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
For Situation 3, it is in the middle of the
vehicle interior (left/right, front/back).
The settings are saved.
Really quiet surroundings are required
for the calibration.Any extraneous noise
will distort the measured values.
25
EQUALIZER
Selecting sound presets
You can select sound presets for the
following music types.
Manually adjusting the equalizer
Notes on adjusting the settings
We recommend you use a CD or cas-
sette (depending on the car radio’s
equipment) that you are familiar with for
making changes to the settings.
● VOCAL (“VOCL”)
● DISCO (“DISC”)
● ROCK
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate X-BASS. For fur-
ther details, refer to the chapter entitled
“Sound and volume distribution set-
tings”.
● TECHNO (“TECH”)
● CLASSIC (“CLAS”)
The settings for these music styles have
already been programmemed.
● Press the DEQ+ button 5.
● Listen to a CD or cassette (de-
pending on the car radio’s equip-
ment).
● Press the softkey 4 assigned to
the “PRE” display item.
● Select one of the presets using the
corresponding softkeys 4.
● What impression does the sound
give you?
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
● Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
The settings are saved.
● Set the equalizer values as de-
scribed in the “Measures” column.
26
EQUALIZER
To select the frequency,
Making adjustments
● press the joystick 7 to the left or
● Press the DEQ+ button 5.
right.
● Press the softkey 4 assigned to
the “USER” display item.
● Adjust the level for the frequency
by pressing the joystick 7 up or
down.
● Press the softkey 4 assigned to
the display item of the equalizer
that you want to configure.
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
● Press the softkey 4 assigned to
the display item of the equalizer
band that you want to configure.
The settings are saved.
Help adjusting the equalizer
Sound Impression / problem
Measures
Bass sound is too weak
Increase bass with
Frequency: 32 to 160 Hz
Level: +4 to +6 dB
Dirty bass
Booming sound
Unpleasant pressure
Reduce the lower mid level with
Frequency: 400 Hz
Level: approx. -4 dB
Sound very much in the foreground,
aggressive, no stereo effect.
Reduce the mid level with
Frequency: 1,000 to 2,500 Hz
Level: -4 to -6 dB
Dull sound
Little clarity
No brilliance to the instruments
Increase treble level with
Frequency: 6,300 to 10,000 Hz
Level: +2 to +4 dB
27
EXTERNAL AUDIO SOURCES
External audio sources
PREAMPLIFIER
Preamplifier
The car radio provides connections for In addition to the CD changer, you can
connecting an external preamplifier and also connect another external audio
a subwoofer.
source equipped with a line output. The
audio source can, for example, be a
portable CD player, MiniDisc player or
MP3 player.
We recommend you use well-matched
products from the Blaupunkt or Veloci-
ty product ranges.
The AUX input must be activated in the
setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “SETP” display item.
● Press the softkey 4 assigned to
the “AUX1” or “AUX2” display item
for the input that you want to switch
on/off.
The AUX menu is displayed.
Note:
If a CD changer is connected, you can-
not change the “AUX1” input.
● Press the softkey 4 assigned to
the “ON” or “OFF” display item to
switch the input on/off.
Note:
If theAUX input is switched on it can be
selected by pressing the SOURCE but-
ton ;.
28
SPECIFICATIONS
Specifications
Amplifier
Output power:
4 x 26 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
Tuner
Wavebands:
FM
AM
:
:
87.5 – 107,9 MHz
530 – 1 710 kHz
FM frequency response:
20 - 16,000 Hz
CD
Frequency response:
15 - 20,000 Hz
Pre-amp out
4 channels:
4 V / 10 kΩ
AUX input
Input sensitivity:
1.2 V / 10 kΩ
Subject to changes!
29
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0030 210 57 85 350 0030 210 57 69 473
(IRL) 01-4149400
01-4598830
02-369 6464
40 2085
(I)
02-369 6331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
10/03
CM/PSS 8 622 403 260
|