Blaupunkt Car Stereo System DJ50 User Manual

Radio / CD  
Dakota DJ50  
Modena CD50  
Sylt CD50  
Operating instructions  
 
2
6
4
1
3
7
8
9
5
11 10  
13 12  
16 15  
14  
3
 
OPERATING ELEMENTS  
1
button to unlock release  
panel  
2
3
Volume control  
ON button, switches the unit on/  
off, mute  
4
5
RDS button, switches the RDS  
convenience features on/off  
Selects display for variable text  
BND button, selects the FM  
memory bank and the MW and  
LW wavebands (the Sylt CD50  
does not include MW/LW radio)  
TS, starts the TravelStore func-  
tion  
6
7
Display  
button, displays the time  
DIS button, changes display  
contents  
8
9
MENU button, accesses the  
menu for basic settings  
button, opens the flip release  
panel  
:
;
Cursor button block  
OK button, confirms menu se-  
lections and starts the SCAN  
function  
<
=
EQ button, adjusts the equalizer  
AUD button, adjusts bass, treble,  
balance and fader  
LD, switches the Loudness func-  
tion on/off  
>
?
1 to 6 station buttons  
TRAF button, switches traffic in-  
formation standby on/off  
@
CD•C button, switches sound  
source between radio, CD and  
CD changer (if connected)  
25  
 
CONTENTS  
Audible fast forward/reverse  
(CUE/REVIEW)............................. 37  
Playing tracks in random order  
(MIX) ............................................. 37  
Scanning tracks (SCAN) ............... 37  
Repeating individual tracks  
Important information ............ 27  
Traffic safety .................................. 27  
Installation ..................................... 27  
Accessories .................................. 27  
Guarantee ..................................... 27  
International telephone information. 27  
(REPEAT) ...................................... 38  
Interrupting playback (PAUSE) ...... 38  
Switching the display mode ........... 38  
Traffic radio information during CD  
playback........................................ 38  
Removable front panel........... 28  
Theft protection system ................. 28  
Removing the operating panel........ 28  
Replacing the operating panel ....... 28  
Switching the car audio  
system on/off......................... 29  
CD changer operation............ 39  
Starting CD changer operation ...... 39  
Selecting CDs............................... 39  
Selecting tracks ............................ 39  
Audible fast forward/reverse (CUE/  
REVIEW) ...................................... 39  
Switching the display mode ........... 39  
Repeating individual tracks or entire  
CDs (REPEAT).............................. 39  
Playing tracks in random order  
Volume control....................... 30  
Adjusting the power-on volume ...... 30  
Mute ............................................. 30  
Mute during telephone operation ... 30  
Adjusting the volume of the beep ... 31  
Radio operation...................... 31  
Switching to the radio mode .......... 31  
Special RDS functions (AF, REG) .. 31  
Selecting wavebands/memory  
banks ............................................ 32  
Tuning into radio stations ............... 32  
Adjusting seek tuning sensitivity..... 33  
(MIX) ............................................. 39  
Scanning all of the tracks on all of  
the CDs (SCAN) ........................... 40  
Interrupting playback (PAUSE) ...... 40  
Storing radio stations..................... 33 Clock ...................................... 40  
Storing radio stations automatically  
(TravelStore).................................. 33  
balance/fader ........................ 42  
Recalling stored radio stations ....... 33  
Adjusting the tone and  
Switching Loudness on/off.... 42  
Scanning the radio stations within  
reception range (SCAN)................ 33  
Adjusting the scan time ................. 34  
Program Type (PTY) ...................... 34  
Optimising radio reception............. 35  
Selecting the display of variable text 35  
Equalizer ................................ 43  
Notes on making the settings......... 43  
Adjusting the equalizer................... 43  
Assistance in setting your equaliser 44  
Adjusting the spectrometer ............ 44  
Traffic information reception . 36  
External audio sources .......... 45  
Specifications ........................ 45  
Installation instructions........ 171  
CD player operation ............... 37  
Starting CD player operation ......... 37  
Selecting tracks ............................ 37  
26  
 
IMPORTANT INFORMATION  
Amplifiers  
Important information  
All Blaupunkt amplifiers can be used.  
CD changers  
Before you use your car audio system  
for the first time, please take the time to  
read the instruction manual carefully  
and make yourself familiar with the au-  
dio equipment.Keep this manual handy  
in your car for future reference.  
The following CD changers can be con-  
nected directly: CDC A 06, CDC A 08,  
CDC A 072 and IDC A 09.  
The CDC A 05 and CDC A 071 can be  
connected with an adapter cable (Blau-  
punkt no. 7 607 889 093).  
Traffic safety  
Traffic safety is always the top  
priority. Do not attempt to operate  
your car audio system unless the traf-  
fic conditions permit. Familiarize  
yourself with the equipment before  
you start driving.  
Always make sure that you are still  
able to hear any warning signals  
coming from outside the vehicle,  
such as police or fire engine sirens,  
at all times.  
Guarantee  
The scope of the guarantee is deter-  
mined by the laws in the country where  
the unit is purchased.  
Regardless of the legal guarantee reg-  
ulations, Blaupunkt affords a 12-month  
guarantee.  
If you have any questions about the  
guarantee, please contact your author-  
ised Blaupunkt dealer.Your cash regis-  
ter receipt is a valid guarantee coupon.  
As a result, please always select a  
moderate volume for playing your car  
audio system while you are driving.  
International telephone  
information  
Have you got any questions on the op-  
eration of this equipment or do you re-  
quire more information?  
Installation  
If you would like to install your new car  
stereo yourself or add other audio com-  
ponents to the existing ones, then  
please read the instructions on installa-  
tion and connection at the end of this  
manual carefully.  
Give us a call!  
You will find the international telephone  
and fax numbers on the last page of this  
manual.  
Accessories  
Use only Blaupunkt-approved accesso-  
ries.  
Remote control unit  
The optionally available RC 08 infrared  
remote control unit allows you to con-  
veniently operate the most important  
system functions from the steering  
wheel.  
27  
 
REMOVABLE FRONT PANEL  
Removable front panel  
Theft protection system  
When you remove the operating  
panel, the car audio system will au-  
tomatically switch off.  
To prevent your car audio system from  
being stolen, it has been equipped with  
a removable front panel (flip release  
panel). Without the front panel, the car  
audio system is useless to thieves.  
All of the settings will remain  
stored.  
A CD inserted into the car audio  
system will remain in place.  
Protect your car audio system against Replacing the operating panel  
theft and take the operating panel with  
you each time you leave the vehicle.  
Never leave the release panel in the car,  
Slide the operating panel into the  
guides from left to right.  
Press the left-hand side of the pan-  
el onto the car audio system until it  
locks into place.  
even if it is well hidden. The panel has  
been designed so that it is easy to re-  
move.  
Notes:  
Do not drop the release panel.  
Do not expose the release panel to  
direct sunlight or other heat sourc-  
es.  
Store the release panel in the case  
supplied.  
Note:  
Removing the operating panel  
While replacing the panel, be care-  
ful not to press on the display.  
Press  
1.  
The release panel will unlock.  
If the car audio system was on when  
you removed the panel, it will automat-  
ically switch back on using the same  
settings when you replace it (radio, CD  
player or CD changer).  
1
First pull the operating panel for-  
ward and then slide it to the left to  
remove it.  
28  
 
SWITCHING ON/OFF  
Switching the car audio system on  
by inserting a CD  
Switching the car audio  
system on/off  
The car audio system can be switched  
on/off in a number of ways.  
If the system is switched off and there  
is no CD in the CD player,  
press  
The flip release panel will open.  
9.  
Switching the car audio system on/  
off with the ignition  
Insert the CD into the CD player  
with the label facing upwards until  
you feel resistance. Do not use  
force.  
If the car audio system has been con-  
nected to your vehicle ignition, it is pos-  
sible to switch it on and off with the igni-  
tion.  
The CD will be pulled automatically into  
the CD player.  
Do not attempt to assist or prevent this  
process.  
You can also switch the car audio sys-  
tem on when the ignition is switched off.  
Press down and hold 3 until the  
car audio system switches on.  
Press the operating panel closed  
gently until you feel it click into  
place.  
Note:  
To prevent the car battery from running  
down, the radio will switch off again au-  
tomatically after one hour.  
The audio system will switch on. CD  
playback will begin.  
Switching the car audio system on/  
off with the removable front panel  
Remove the release panel.  
The car audio system will switch off.  
Replace the release panel.  
The car audio system will switch on  
again.The last settings used (radio, CD  
player or CD changer) will be activated.  
Switching the car audio system on/  
off by pressing 3  
Press 3 to switch the car audio  
system on.  
Press 3 for longer than 2 seconds  
to switch the car audio system off  
again.  
The system will then switch off.  
29  
 
VOLUME CONTROL  
Volume control  
Mute  
You can reduce the volume of the car  
audio system immediately (mute).  
The car audio system volume can be  
adjusted to levels from 0 (off) to 66 (max-  
imum).  
Press 3 briefly.  
To increase the volume, turn the  
volume control knob 2 to the  
right.  
“MUTE” will appear in the display.  
Selecting the mute level  
It is possible to select the mute level.  
Press MENU 8.  
To decrease the volume, turn the  
volume control knob 2 to the left.  
Press : repeatedly until “MUTE  
Adjusting the power-on volume  
It is possible to adjust the volume at  
which the car audio system switches on.  
LEVELappears in the display.  
Press  
: to select the mute  
level.  
Press MENU 8.  
Once you have made your selec-  
tion, press MENU 8 or OK ;.  
Press : repeatedly until “ON  
VOLUME” appears in the display.  
Mute during telephone  
operation  
Press  
: to adjust the vol-  
ume.  
If your car audio system has been  
equipped with a mobile telephone, it will  
automatically switch to mute when you  
use the phone. This will not work un-  
less the mobile phone is connected to  
the car audio system as described in  
the installation instructions.  
If a traffic announcement is received  
while the phone is in use and traffic in-  
formation priority has been activated,  
you will hear the traffic announcement.  
For more information, refer to the sec-  
tion on “Traffic information reception”.  
The car audio system will be muted to  
the mute level selected.  
If you adjust this setting to “0”, the car  
audio system will switch on at the vol-  
ume used before it was switched off.  
Warning of serious injury  
If the power-on volume is set to the  
maximum level, it may be extremely  
loud when the car audio system is  
switched on.  
If the power-on volume is set to 0 and  
the car audio system was played at  
maximum volume before it was  
switched off, it may be extremely loud  
when the car audio system is  
switched back on. This could result  
in serious injury to your ears!  
Once you have selected the de-  
sired settings, press MENU 8 or  
OK ;.  
30  
 
VOLUME CONTROL  
RADIO OPERATION  
Adjusting the volume of the  
beep  
For a number of functions you will hear  
a beep if you press a key for longer than  
2 seconds, e.g. if you want to store a  
radio station on a station preset.You can  
adjust the volume level of this beep.  
Radio operation  
This car audio system has been  
equipped with an RDS radio receiver.  
Many FM radio stations now transmit  
the RDS signal, which contains such  
other information as the station name  
and the program type (PTY) along with  
the regular station programming.  
As soon as the car radio receiver de-  
tects the station name, it will appear in  
the display. It is also possible to display  
the program type.For more information,  
refer to the section on “Program Type  
(PTY)”.  
Press MENU 8.  
Press : repeatedly until  
“BEEP” appears in the display.  
Press  
: to adjust the volume.  
“0” means the beep volume is off,  
“9” means the beep volume is ad-  
justed to the maximum volume.  
Switching to the radio mode  
Once you have adjusted the set-  
tings, press MENU MENU 8 or  
OK ;.  
If you are currently using the CD player  
or CD changer,  
press CD•C @ repeatedly until  
“RADIO” appears in the display.  
Special RDS functions (AF, REG)  
The special RDS functions for AF (Al-  
ternate Frequency) and REG (REGion-  
al) improve the performance of your car  
radio.  
AF. If this RDS function is activated,  
the car radio continuously searches  
in the background for the frequency  
with the best reception for the sta-  
tion you have tuned into.  
REG. A number of radio stations  
broadcast different regional pro-  
gramming at different times of the  
day. Use REG to prevent your car  
radio from tuning into alternate fre-  
quencies which might have differ-  
ent programming.  
31  
 
RADIO OPERATION  
Note:  
Tuning into radio stations  
You can tune into radio stations in a  
number of different ways.  
It is necessary to activate/deactivate  
REG in the menu.  
Switching REG on/off  
Automatic seek tuning  
Press MENU 8.  
Press  
or :.  
Press : repeatedly until “REG”  
appears in the display. “OFF” or  
“ON” will appear next to “REG”.  
The radio will tune into the next availa-  
ble station within reception range.  
Manual station selection  
Press or : to switch REG off  
You can also tune into radio stations  
manually.  
or on.  
Press MENU 8 or OK ;.  
Press or :.  
Switching RDS functions on/off  
Note:  
To take advantage of the RDS  
functions for AF and REG, press  
RDS 4.  
You cannot use manual tuning unless  
the RDS functions are deactivated.  
Paging through the broadcasting  
network (for FM only)  
When the RDS functions have been  
activated, “RDS” will light up as a sym-  
bol in the display.When you activate the  
functions, “REG ON” or “REG OFF” will  
appear briefly in the display.  
If a radio broadcasting network has  
more than one station, you can page  
through the “station network”.  
Press or : to tune into the  
Selecting wavebands/memory  
banks  
next station in the network.  
Note:  
Using this car audio system, you can  
tune into radio stations on the FM, MW  
and LW (AM) wavebands. There are  
three memory banks for the FM wave-  
band and one memory bank each for  
MW and LW (the Sylt CD50 does not  
include MW/LW radio).  
To take advantage of this function, you  
must have activated the RDS functions.  
It is only possible to tune into those sta-  
tions which have been received once  
before already.To do this, use the SCAN  
or TravelStore function.  
You can store six stations in each of  
these memory banks.  
To switch between the different FM  
memory banks or wavebands,  
press BND /TS 5.  
32  
 
RADIO OPERATION  
Adjusting seek tuning sensitivity Storing radio stations  
automatically (TravelStore)  
It is also possible to adjust the sensitiv-  
ity of the seek tuning function to tune  
the radio into stations with strong recep-  
tion signals only, or to those with weak-  
er reception signals as well.  
You can automatically store the six ra-  
dio stations with the strongest reception  
in your current reception area (for FM  
only). These stations will be stored in  
the FMT memory bank.  
Press MENU 8.  
Note:  
Press : repeatedly until  
Any stations stored previously in the  
memory bank will be deleted.  
“SENS” appears in the display.  
Press :.  
Press and hold down BND /TS 5  
The currently selected setting will ap-  
pear in the display.SENS HI6indicates  
the highest level of sensitivity, SENS  
LO1” the lowest. If you select “SENS  
LO”, “lo” will light up in the display.  
for longer than two seconds.  
The storing process will begin. “TRAV-  
EL-STORE” will appear in the display.  
After the stations have been stored, the  
radio will automatically begin to play the  
station stored on preset button 1 for the  
FMT memory bank.  
Press  
sensitivity.  
: to adjust the desired  
Once you have made your selec-  
tion, press MENU 8 or OK ;.  
Recalling stored radio stations  
Select the desired station memory  
Storing radio stations  
bank.  
Storing radio stations manually  
Press the station button 1 to 6 >  
on which you have stored the de-  
sired radio station.  
Select the desired memory bank  
FM1, FM2, FMT or either MW or  
LW (the Sylt CD50 does not in-  
clude MW/LW radio).  
Scanning the radio stations  
within reception range (SCAN)  
You can scan all of the radio stations  
currently within your reception range.  
The scan time can be set in the menu  
to play from five to 30 seconds.  
Tune the radio into the desired sta-  
tion.  
Press and hold down one of the  
station preset buttons 1 to 6 > on  
which you want to store the radio  
station for longer than two seconds.  
Starting SCAN  
Press and hold down OK ; for  
longer than two seconds.  
SCAN will begin. “SCAN” will appear  
briefly in the display, followed by the  
33  
 
RADIO OPERATION  
flashing station name or frequency of Using the PTY function, you can select  
the radio station currently being the radio station according to the type  
scanned.  
of program being broadcast.  
As soon as the radio registers a radio  
station broadcasting the program type  
selected, it will automatically switch from  
the station playing or from the CD play-  
er or CD changer mode to that station.  
Stopping the SCAN function,  
continuing to listen to the radio  
station scanned  
Press OK ;.  
SCAN will end and the last station  
scanned will continue playing.  
Switching PTY on/off  
Press MENU 8.  
Adjusting the scan time  
Press : repeatedly until “PTY  
ON” or “PTY OFF” appears in the  
display.  
Press MENU 8.  
Press : repeatedly until  
“SCANTIME” appears in the dis-  
play.  
Press or : to switch this  
function either on or off.  
Press  
as desired.  
: to set the scan time  
PTY will light up in the display when this  
function has been activated.  
Once you have made your selec-  
tion, press MENU 8 or OK ;.  
Press MENU 8 or OK ;.  
Selecting the program type and  
starting seek tuning  
Note:  
The scan time selected also applies to  
the SCAN function for CD player and  
CD changer operation.  
Press or :.  
The currently selected program type will  
appear in the display.  
Program Type (PTY)  
If you would like to select a different  
In addition to the radio station name, a  
number of FM stations transmit informa-  
tion on the type of program they broad-  
cast.This car radio has been equipped  
to receive and display this information.  
program type, press or  
:
while the program type is on dis-  
play to switch to another program  
type.  
OR  
These program types can include:  
Press one of the station preset but-  
tons from 1 to 6 > to select the  
program type stored on that partic-  
ular station button.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
The program type selected will appear  
briefly in the display.  
34  
 
RADIO OPERATION  
“HICUT 0” indicates that the function is  
switched off; when “HICUT 1” appears,  
the treble will be cut.  
Press or : to start seek tun-  
ing.  
The next radio station broadcasting the  
program selected will begin to play.  
Press MENU 8 or OK ;.  
Note:  
Selecting the display of variable  
text  
If the radio is not able to find a station  
broadcasting the program type select-  
ed, you will hear a beep and “NO PTY”  
will appear briefly in the display.The sta-  
tion selected previously will then resume  
play.  
A number of radio stations use the RDS  
signal to transmit advertising or other  
texts in place of their station names.  
These “variable texts” will appear in the  
display. It is possible to adjust your ra-  
dio so that these “variable texts” do not  
appear.  
Storing the program types on the  
station preset buttons  
Press and hold down RDS 4 until  
Press or : to select the pro-  
“NAME FIX” appears in the display.  
gram type.  
To have the “variable texts” dis-  
played again, press and hold down  
RDS 4 until “NAME VAR” appears  
in the display.  
Press the desired station preset  
button (1 to 6) > for longer than  
two seconds.  
The program type selected will then be  
stored on the station preset button (1 to  
6) > pressed.  
Optimising radio reception  
Interference-related treble cut  
(HICUT)  
The HICUT function improves reception  
when reception begins to deteriorate. If  
interference occurs, then the treble and  
the noise is cut automatically.  
Switching HICUT on/off  
Press MENU 8.  
Press : repeatedly until “HI-  
CUT” appears in the display.  
Press or : to switch HICUT  
on or off.  
35  
 
TRAFFIC INFORMATION RECEPTION  
Adjusting the volume for traffic  
announcements  
Traffic information  
reception  
Press MENU 8.  
Switching traffic information  
priority on/off  
Press : repeatedly until “TA  
VOLUME” appears in the display.  
Press TRAF ?.  
Press  
: to adjust the traffic  
announcement volume.  
Traffic information priority is activated  
when the traffic congestion symbol lights  
up in the display.  
Once you have adjusted the set-  
ting, press MENU 8 or OK ;.  
Note:  
You will hear a warning beep  
if you leave the reception area of  
the traffic information station you  
are tuned into.  
if you are listening to a CD, leave  
the reception area of the traffic in-  
formation station you are tuned into  
and the seek tuning function is un-  
able to find another traffic informa-  
tion station.  
if you switch from a traffic informa-  
tion station to a station which does  
not broadcast traffic information.  
Then either switch off traffic information  
priority or switch to a different traffic in-  
formation station.  
36  
 
CD PLAYER OPERATION  
Selecting tracks  
CD player operation  
The CD player in this car audio system Press a key on the cursor block :  
can be used to play conventional music  
CDs with a diameter of 12 cm.  
to select the next or the previous  
track.  
Press  
same track.  
or  
: once to restart the  
Danger of damage to the CD  
player!  
CD singles with a diameter of 8 cm  
and contour CDs (shape CDs) are  
not suitable for use with this CD play-  
er.  
Audible fast forward/reverse  
(CUE/REVIEW)  
To start Cue or Review,  
We assume no liability for any dam-  
age done to the CD player resulting  
from the use of unsuitable CDs.  
press and hold down either or  
: until the process begins.  
Playing tracks in random order  
(MIX)  
Starting CD player operation  
If there is no CD in the player,  
press 9.  
Press 5 MIX >.  
“MIX CD” will appear briefly in the dis-  
play, the MIX symbol will light up in the  
display. The next track played will be  
selected at random.  
The flip release panel will open.  
Insert a CD into the player with the  
label facing up until you feel resist-  
ance. Do not use force.  
Stopping the MIX function  
The CD will be pulled into the player  
automatically.  
Do not attempt to assist or prevent this  
process.  
Press 5 MIX > again.  
“MIX OFF” will appear briefly in the dis-  
play and the MIX symbol will no longer  
light up.  
Press the operating panel closed  
gently until you feel it click into  
place.  
Scanning tracks (SCAN)  
You can scan all of the tracks on the  
CD.  
CD playback will begin.  
If there already is a CD inserted  
Press OK ; for longer than two  
seconds. Scanning will begin with  
the next track.  
into the player,  
press CD•C @ repeatedly until  
“CD” appears in the display.  
Note:  
Playback will resume at the point where  
it was interrupted.  
It is possible to adjust the scan time.For  
more information, read the section on  
“Adjusting the scan time” in the chapter  
on “Radio Operation”.  
37  
 
CD PLAYER OPERATION  
Stopping the SCAN function,  
continue listening to the current  
track  
Switching the display mode  
To switch the display between the  
track number and time or the track  
number and elapsed playing time,  
To stop the SCAN function, press  
OK ;.  
press  
/ DIS 7 for longer than  
two seconds once or repeatedly as  
required.  
The track currently scanned will contin-  
ue playing.  
Traffic radio information during  
CD playback  
Repeating individual tracks  
(REPEAT)  
If you would like to receive traffic  
radio information while listening to  
your CD player, press TRAF ?.  
To repeat the track currently play-  
ing, press 4 RPT >.  
“REPEAT TRCK” will appear briefly in  
the display, the RPT symbol will light up  
in the display.The track will continue to  
repeat until RPT is deactivated.  
The traffic congestion symbol will light  
up in the display to indicate that priority  
for traffic radio announcements has  
been activated. For more information,  
please refer to the section on “Traffic  
information reception”.  
Stopping the REPEAT function  
If you want to stop the REPEAT  
function, press 4 RPT > again.  
“REPEAT OFFwill appear briefly in the  
display and the RPT symbol will no long-  
er light up. CD playback will resume  
normally.  
Interrupting playback (PAUSE)  
Press 3 >.  
PAUSE” will appear in the display.  
Stopping PAUSE  
Press 3 > during the pause.  
Playback will resume.  
38  
 
CD CHANGER OPERATION  
Repeating individual tracks or  
entire CDs (REPEAT)  
CD changer operation  
Note:  
To repeat the track currently play-  
ing, press 4 RPT > briefly.  
For information on how to handle CDs,  
how to insert CDs into the changer and  
how to operate the changer, please re-  
fer to the instructions included with the  
CD changer.  
“REPEAT TRCK” will appear briefly in  
the display, RPT will light up in the dis-  
play.  
To repeat the entire CD currently  
playing, press 4 RPT > again.  
Starting CD changer operation  
Press CD•C @ repeatedly until  
“CHANGER” appears in the dis-  
play.  
“REPEAT DISCwill appear briefly in the  
display, RPT will light up in the display.  
Playback will begin with the first CD the  
changer detects in the magazine.  
Stopping the REPEAT function  
To stop the REPEAT function for  
the current track or CD, press 4  
RPT > repeatedly until “REPEAT  
OFF” appears in the display and  
RPT no longer lights up.  
Selecting CDs  
To select a CD up or down in the  
magazine, press or : the re-  
quired number of times.  
Playing tracks in random order  
(MIX)  
Selecting tracks  
To select a different track on the  
CD currently playing, press or  
: the required number of times.  
To play the tracks of the currently  
selected CD in random order,  
press 5 MIX > briefly.  
Audible fast forward/reverse  
(CUE/REVIEW)  
“MIX CD” will appear briefly in the dis-  
play, MIX will light up in the display.  
To start Cue or Review,  
To play the tracks of all of the CDs  
in random order, press 5 MIX >  
again.  
press and hold down either or  
: until the process begins.  
“MIX ALLwill appear briefly in the dis-  
play, MIX will light up in the display.  
Switching the display mode  
To switch the display between the  
track number and time or the track  
number and elapsed playing time,  
Note:  
The CDC A 08 and the IDC A 09 are  
also able to play all of the CDs in the  
changer in random order.The other CD  
changers first play all of the tracks on a  
CD in random order and then select the  
next CD in the changer.  
press  
/ DIS 7 for longer than  
two seconds once or repeatedly as  
required.  
39  
 
CD CHANGER OPERATION  
CLOCK  
Stopping the MIX function  
CLOCK  
To stop the MIX function, press 5  
MIX > repeatedly until “MIX OFF”  
appears briefly in the display and  
MIX no longer lights up.  
Displaying the clock briefly  
In the radio mode  
To display the time briefly, press  
/ DIS 7 briefly.  
Scanning all of the tracks on all  
of the CDs (SCAN)  
In CD player and CD changer mode  
To switch between the display of  
To scan all of the tracks on all of  
the CDs in ascending order, press  
OK ; for longer than two sec-  
onds.  
the CD number, playing time and  
the time, press  
repeatedly.  
/ DIS 7 once or  
“SCAN” will appear in the display.  
Altering the permanent display  
Stopping the SCAN function  
To make the time or another dis-  
play as described above perma-  
To stop the SCAN function, press  
OK ; briefly.  
nent, press and hold  
/ DIS 7  
until the desired information ap-  
pears in the display.  
The track currently scanned will contin-  
ue playing.  
Setting the time  
Note:  
It is possible to adjust the scan time.For To set the time, press MENU 8.  
more information, read the section on  
“Adjusting the scan time” in the chapter  
on “Radio Operation”.  
“MENU” will appear in the display.  
Press : until “CLOCKSET” ap-  
pears in the display.  
Interrupting playback (PAUSE)  
Press :.  
The time will appear in the display. The  
Press 3 >.  
PAUSE” will appear in the display.  
minutes will flash and can be altered.  
Press or : to alter the min-  
Stopping PAUSE  
utes.  
Press 3 > during the pause.  
Playback will resume.  
Once you have altered the minutes,  
press :. The hours will begin to  
flash.  
Press or : to alter the hours.  
Once you have set the time, press  
MENU 8 or OK ; twice.  
40  
 
CLOCK  
Selecting the 12/24-hour time  
display mode  
Displaying the time briefly when  
the car radio is switched off  
To display the time briefly when the car  
radio is switched off,  
Press MENU 8.  
“MENU” will appear in the display.  
press  
/ DIS 7.  
Press : repeatedly until “24 H  
MODE” or “12 H MODE” appears  
in the display.  
The time will then appear in the display  
for eight seconds.  
Press or : to switch the dis-  
play mode.  
Once you have selected the mode,  
press MENU 8 or OK ;.  
Activating the clock for display  
when the car audio system is  
switched off  
To activate the clock for display  
when the car audio system is  
switched off, press MENU 8.  
“MENU” will appear in the display.  
Press : repeatedly until “CLK  
DISP OFF” or “CLK DISP ON” ap-  
pears in the display.  
Press or : to switch the  
clock display on or off.  
Once you have made the setting,  
press MENU 8 or OK ;.  
41  
 
TONE AND BALANCE/FADER  
Adjusting the tone and  
balance/fader  
Switching Loudness on/off  
Loudness boosts the bass and treble  
when the volume is low to create a more  
natural sound.  
Adjusting the bass  
To adjust the bass, press AUD / LD  
=.  
Press AUD / LD = for approx. two  
seconds.  
“BASS” will appear in the display.  
LD will light up in the display to indicate  
that Loudness is active.  
Press or : to alter the bass.  
Adjusting Loudness intensity  
Adjusting the treble  
The Loudness boost can be set in  
stages from one to six.  
To adjust the treble, press AUD /  
LD =.  
Press MENU 8.  
“BASS” will appear in the display.  
“MENU” will appear in the display.  
Press : until “TREBLE” ap-  
pears in the display.  
Press : repeatedly until  
“LOUDNESS” appears in the dis-  
play.  
Press or : to alter the treble.  
Adjusting the balance  
Press or : to alter the Loud-  
To adjust the balance, press AUD /  
LD =.  
ness setting.  
Once you have completed adjust-  
ing the settings, press MENU 8 or  
OK ;.  
“BASS” will appear in the display.  
Press : until “BALANCE” ap-  
pears in the display.  
Press or : to alter the bal-  
ance.  
Adjusting the fader  
To adjust the fader, press AUD / LD  
=.  
“BASS” will appear in the display.  
Press : until “FADER” appears  
in the display.  
Press or : to alter the fader.  
42  
 
EQUALIZER  
Adjusting the equalizer  
Equalizer  
This car audio system is equipped with Press EQ <.  
a parametric 2-band equalizer. For  
“LOW EQ” will appear in the display.  
“LOW EQ” the gain can be set to a fre-  
quency between 60 to 100 Hz. For  
“HIGH EQ” the gain can be set to a fre-  
quency between 10000 and 17500 Hz.  
As a result, it is possible to significantly  
influence the in-vehicle acoustics.  
Press or : to select either  
“LOW EQ” or “HIGH EQ”.  
Press or : to adjust the  
gain.  
Press or : to select the fre-  
quency range.  
Notes on making the settings  
To select the next frequency, press  
OK ; first and then :.  
We recommend that you use a CD you  
are familiar with to make the settings.  
Before you set the equaliser, set bass,  
treble, balance and fader to “0” and de-  
activate the Loudness function. For  
more information on how to do this, re-  
fer to the section on “Tone and balance/  
fader”.  
Once you have completed making  
all of the necessary adjustments,  
press EQ <.  
Now listen to the CD you have se-  
lected.  
Evaluate the sound according to  
your own personal preferences.  
Now refer to “Sound impression” in  
the table.  
Make the settings for the equalizer  
as described under “What to do”.  
43  
 
EQUALIZER  
Assistance in setting your equaliser  
Start to make your settings in the treble and end it with the bass range.  
Frequency range Sound  
impression/problem  
What to do  
Notes  
Bass  
Bass reproduction Boost the bass Avoid distortion.  
60 to 100 Hz  
too weak  
with “LOW EQ”.  
Frequency: 60 to  
100 Hz.  
Adjust the gain  
carefully.  
Gain: +4 to +6 dB.  
Treble  
10000 to  
17500 Hz  
Lifeless reproduc-  
tion.  
Boost treble  
range with  
Avoid a piercing  
type of tone.  
Strong hissing  
Lack of transparen- “HIGH EQ”.  
cy.  
Instruments do not to 17500 Hz.  
sparkle.  
Gain: +2 to +4 dB.  
Frequency: 10000 sound unpleas-  
ant.  
Selecting the spectrometer type  
Adjusting the spectrometer  
The spectrometer in the display uses Press MENU 8.  
symbols to temporarily indicate what  
“MENU” will appear in the display.  
adjustments are made to the volume,  
the tone and balance/fader and the  
equalizer settings.  
Press : repeatedly until “EQ  
DISPLAY” appears in the display.  
Press or : to select either  
“SPECTRUM 1”, “SPECTRUM 2”  
or “EQ DISP OFF”.  
If no adjustments are being made to the  
system, the spectrometer displays the  
output level of the car radio.  
You can select the type of spectrome-  
ter you want displayed in the menu.  
There are two different types available.  
Once you have completed adjust-  
ing the settings, press MENU 8 or  
OK ;.  
44  
 
EXTERNAL AUDIO SOURCES  
External audio sources  
SPECIFICATIONS  
Specifications  
In place of the CD changer it is also  
possible to connect other external au-  
dio sources to the line output. These  
sources can include a portable CD play-  
er, MiniDisc player or MP3 player.  
You must activate the AUX output in the  
menu.  
Amplifier  
Output power:  
4 x 25 watts sinus  
acc. to DIN 45 324  
at 14.4 V  
4 x 40 watts max.  
power  
If you would like to connect another ex-  
ternal audio source, you will require an  
adapter cable. This adapter cable can  
be ordered from any authorized Blau-  
punkt dealer.  
Tuner  
Wavebands:  
FM :  
MW :  
LW :  
87.5 – 108 MHz  
531 – 1602 kHz  
153 – 279 kHz  
Switching the AUX output on/off  
Press MENU 8.  
(The Sylt CD50 does not include MW/  
LW.)  
“MENU” will appear in the display.  
FM frequency response:  
30 - 15000 Hz  
Press : repeatedly until “AUX-  
IN-1 OFF” or “AUX-IN-1 ON” ap-  
pears in the display.  
Press or : to switch AUX on  
CD  
or off.  
Frequency response:  
Once you have completed your se-  
lections, press MENU 8 or OK  
;.  
20 - 20000 Hz  
Preamp Out  
4 channels:  
Note:  
2 V  
If the AUX input has been switched ON,  
you can select it by pressing CD•C @.  
Subject to technical modification!  
45  
 
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Número de  
serviço  
Tel.:  
Fax:  
Deutschland  
Belgique / België  
France  
Nederland  
Great Britain  
Danmark  
Sverige  
0 18 05 00 02 25  
0 25 25 54 44  
014 010 70 07  
023 565 63 48  
018 958 383 66  
44 89 83 60  
0 51 21 49 40 02  
0 25 25 54 48  
014 010 73 20  
023 565 63 31  
018 958 383 94  
44 89 86 44  
08 750 15 00  
66 81 70 00  
08 750 18 10  
66 81 71 57  
Norge  
Suomi  
Österreich  
094 359 91  
01-6 10 39-0  
015 762 241  
094 359 92 36  
01-6 10 39-391  
015 769 473  
âeská republika  
USA  
Singapore  
Slovensko  
026 130 04 41  
800-266 25 28  
006 535 054 47  
042 175 873 212  
026 130 05 14  
708-681 71 88  
006 535 053 12  
042 175 873 229  
Blaupunkt-Werke GmbH  
Bosch Gruppe  
02/00 TRO  
K7/VKD 8 622 402 138  
 

Belkin Marine Battery BU3DC000 12V User Manual
Belkin Network Cables PM01141ea User Manual
Black Box Switch KV1106A User Manual
Bradley Smoker Smoker BTDS108CE EU User Manual
Broan Ventilation Hood E60000 User Manual
Carrier Air Conditioner T 326 User Manual
Carrier Refrigerator Container Refrigeration Unit User Manual
Carrier Refrigerator HS070 160 User Manual
Chamberlain Garage Door Opener PD758DS 3 4 HP User Manual
Cisco Systems Home Security System ASA5505BUNK9 User Manual