Model MBS1000A
Desktop
Paging Microphone
DESCRIPTION
The Bogen Model MBS1000A is a dual-impedance, uni-directional,
dynamic desktop microphone with a rubberized finish for all industri-
al and commercial public address and paging applications. The
MBS1000A has a bottom-mounted slide switch for low- or high-
impedance selection.The wide band frequency response is smooth and
peak free, thereby providing a natural, highly-intelligible sound.
The microphone output provides a normally open switch closure pair
that can be used to operate external equipment. When the micro-
phone is activated using either the push-to-talk or lift-to-talk functions,
the provided contact closes.The push-to-talk actuator bar includes a
locking feature to allow the mic to remain active for extended periods.
The lift-to-talk feature can be enabled or disabled using a bottom-
mounted selector switch.
Four molded, non-skid, non-marring, and permanently resilient "feet"
are located under the cast base.
SPECIFICATIONS
Element:
Dynamic
Polar Pattern:
Uni-directional
Frequency Response: 45 to 15,000 Hz
Output:
Hi-Z: -52 dB (0 dB = 1 volt/microbar)
Lo-Z: -72 dB (0 dB = 1 volt/microbar)
Hi-Z: 50,000 ohms, matches 50,000 ohms
or greater
Impedance:
Lo-Z: 500 ohms, matches 125 to 1000 ohms
Push-to-talk and push-to-lock
7-feet of four-conductor, two-shielded cable
(mic leads shielded, contacts not shielded)
4-3/8" W x 9-3/8" H x 5-7/8" D
1 lb.
Switch:
Cable:
Dimensions:
Product Weight:
Finish:
Black rubberized finish with die cast base
IMPEDANCE
The Bogen Model MBS1000A is a dual-impedance microphone. The
high-impedance position is 50,000 ohms unbalanced and the low-
impedance is 500 ohms balanced.The low-impedance position is rec-
ommended for long cable length requirements. Cable lengths of 100
feet or more can be used in this position without loss of level or dete-
rioration of high frequency response.
Printed in Korea.
0302
© 2003 Bogen Communications, Inc.
54-5901-02A
Specifications subject to change without notice.
|