Bose Stereo System bose wave soundlink adapter User Manual

®
®
WAVE SOUNDLINK ADAPTER  
FOR THE BOSE® WAVE® MUSIC SYSTEM AND THE BOSE WAVE® RADIO II  
Owners Guide | Bedienungsanleitung | Guía de usuario | Notice d’utilisation | Manuale di istruzioni  
Gebruiksaanwijzing |  
|
|
|
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Safety Information  
Please read this owner’s guide  
Please complete and retain for your records:  
Serial Number: _________________________________  
Model Number:_________________________________  
Please take the time to follow the instructions in this owner’s  
guide carefully. It will help you set up and operate your  
system properly and enjoy all of its advanced features. Please  
save this owner’s guide for future reference.  
WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.  
WARNING: Do not expose this apparatus to dripping or splashing, and do not place objects filled with  
liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill  
liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.  
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of  
uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk  
of electrical shock.  
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the  
presence of important operating and maintenance instructions in this owner’s guide.  
©2011 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written  
permission.  
2
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety,  
regulatory compliance, and system performance and may void the product warranty.  
CAUTION: Do not use any liquid cleaning solutions, solvents, chemicals, alcohol, ammonia, or abrasives.  
CAUTION: Do not allow liquids to spill into any openings in the enclosure. If liquids get into the unit, turn it off immediately.  
Call Bose® Customer Support as soon as possible to arrange for service. See the address list included in the carton.  
WARNING:  
Keep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge,  
disassemble, heat above 100ºC (212ºF), or incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct  
type and model number.  
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with Duracell, Eveready, Energizer, Maxell, Toshiba,  
or Shun Wo CR2032 or DL2032 3-volt lithium battery.  
Please dispose of used batteries properly, following any local regulations. Do not incinerate.  
WARNING: Do not place any naked flame sources, such as lighted candles, on or near the apparatus.  
WARNING: Contains small parts that may be a choking hazard. Not suitable for children under age 3.  
Note: The product label is located on the bottom of the product.  
Note: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily  
operable.  
Note: Operating temperature range: 0 to 35°C. This product is intended for indoor use only.  
Note: This product is intended for use only with the power supply provided.  
3
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
This product conforms to all EU Directive requirements as applicable by law. The complete Declaration of Conformity  
Names and Contents of Toxic or Hazardous Substances or Elements  
For the SoundLink® USB key:  
Toxic or Hazardous Substances and Elements  
This device complies with FCC and Industry Canada  
RF radiation exposure limits set forth for general pop-  
ulation. It must not be co-located in conjunction with  
any other antenna or transmitter within a host device.  
Part  
Name  
Lead Mercury Cadmium Hexavalent  
Polybrominated  
Biphenyl (PBB)  
Polybrominated  
diphenylether (PBDE)  
(Pb)  
(Hg)  
(Cd)  
(CR(VI))  
PCBs  
X
0
0
0
0
0
0
Metal  
parts  
This device complies with Part 15 of the FCC Rules,  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
X
0
0
0
0
Plastic  
parts  
0
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Speakers  
Cables  
In Canada, operation is subject to the following two  
conditions: (1) this device may not cause interference  
and (2) this device must accept any intervenes,  
including interference that may cause undesired  
operation of the device.  
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for  
this part is below the limit requirement in SJ/T 11363-2006.  
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous  
materials used for this part is above the limit requirement in SJ/T  
11363-2006.  
For the SoundLink® adapter:  
To comply with FCC and Industry Canada RF radiation exposure requirements, this device must be installed to produce a  
separation distance of 20 cm from all persons. It must not be co-located or operating in conjunction with any other antenna  
or transmitter.  
This product complies with the Canadian ICES-003 Class B and RSS-210 specifications.  
In the U.S. only, this product complies with CFR 47 Part 15 specifications.  
Additional safety information: See the additional instructions on the Important Safety Instructions sheet (North America only)  
enclosed in the shipping carton.  
4
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Connecting your SoundLink® adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Using the SoundLink® adapter with your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
8
Manually linking the SoundLink® adapter and USB key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
If you don’t hear audio from the Wave® system: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Pairing a Bluetooth® device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Using multiple Bluetooth® devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Upgrading your Wave® music system, as needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
5
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Product parts  
®
There are two versions of the SoundLink kit. The version you chose for your specific  
®
Wave system determines which steps you follow in making the connections.  
Identify your kit as A or B below and follow the instructions that apply.  
A. Using a kit with basic contents only  
B. Using a kit with both basic and optional  
upgrade contents  
If you have only the basic contents kit directly  
below:  
If you have all of the contents shown below:  
®
®
Proceed with “Connecting your SoundLink  
adapter” on page 7.  
1. Begin with “Upgrading your Wave music  
system, as needed” on page 19.  
®
2. Proceed with “Connecting your SoundLink  
adapter” on page 7.  
Basic contents  
Upgrade contents  
SoundLink®  
adapter  
SoundLink®  
USB key for use  
with computer  
SoundLink®  
remote control  
(battery installed)  
Upgrade CD  
Adapter  
power pack  
100-240V  
AC Power  
cord  
6
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
®
Connecting your SoundLink adapter  
The SoundLink® adapter connects directly to your Wave® system.  
1. Plug the SoundLink® adapter cable (with the words Bose link facing up) into the Bose link  
connector on the rear of the system.  
Bose link  
connector  
Bose link  
cable  
SoundLink®  
adapter  
2. Place the adapter in a convenient location. It does not need to be within view.  
If the adapter is to the left of the system (as you face it), be sure the two are at least  
2 in. (5 cm) apart to eliminate any interference with AM reception.  
7
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
®
Using the SoundLink adapter with your computer  
1. Using the provided SoundLink® remote control, press the SoundLink/AUX button  
1-2 times until SOUNDLINK appears on the front panel display.  
CONNECTING, and DISCOVERABLE will then appear in sequence on the front  
panel display. If no text appears, see Troubleshooting” on page 16.  
2. With your computer turned on, lift the antenna on the SoundLink® USB key to the  
vertical position and plug the key into a USB port on your computer.  
USB key  
antenna  
To locate a USB port on your  
computer, look for the identifying  
symbol.  
If you are using a USB hub with  
your computer, make sure it is a  
powered hub.  
USB key  
power light  
and button  
USB port  
8
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
3. Check to be sure the SoundLink® USB key power light turns on and begins to flash.  
4. Wait for your computer to recognize the SoundLink® USB key. It may take up to 20  
seconds the first time.  
®
CONNECTING appears on the Wave system display, and lights on the USB key and  
®
®
®
SoundLink adapter flash rapidly. The Wave system emits a brief beep when the SoundLink  
connection is ready for use.  
5. After the connection is made, you may need to set your computer’s audio output device.  
See page 12.  
Note: If PRESS PLAY TO CONNECT appears on the front panel display, try making the  
®
connection manually. See Manually linking the SoundLink adapter and USB key” on page 10.  
Disconnecting the computer  
Press the button on the end of the SoundLink® USB key. Then remove the USB key from the  
computer USB port.  
Reconnecting the computer  
Make sure your Wave® system is turned on and COMPUTER appears on the system display.  
When you plug the SoundLink® USB key into the USB port on your computer, it will  
®
automatically reconnect to your Wave system. If you have problems connecting, see  
Troubleshooting” on page 16.  
9
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
®
Manually linking the SoundLink adapter and USB key  
If you are using a replacement USB key, or if you are having trouble pairing your computer with  
the SoundLink® system, you may need to link the devices manually.  
1. Using the SoundLink® remote control, press the SoundLink/AUX button 1-2 times until  
SOUNDLINK appears on the front panel display.  
2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is  
displayed and flashing on the Wave® system display.  
3. With your computer turned on, lift the antenna on  
the SoundLink® USB key to the vertical  
position and plug the key into a USB port on your  
computer.  
4. Press and hold the button on the USB key for  
more than 3 seconds until the light begins to flash.  
USB key  
antenna  
When the USB power light changes from flashing  
®
to solid and the Wave system emits a beep,  
linking is complete.  
COMPUTER appears on the front panel display.  
USB key button  
10  
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
®
If you don’t hear audio from the Wave system:  
Restart the music application  
If you don’t hear music from the Wave® system after successfully connecting the USB key, you  
may need to quit and restart your music application.  
Set the audio output device  
If you still have no audio from the Wave® system, you may need to set your computer’s audio  
output device. See page 12 for more information.  
Check the volume controls  
For best performance, make sure:  
Your Wave® system volume is turned up and the sound is not muted.  
The volume on your computer is turned up and is not muted.  
Your music application is running and the volume is turned up and not muted.  
Note: While listening to music from your computer, no sound plays through the computer’s internal  
speakers or sound card. On some computers, you can choose a separate audio output for your  
music and still hear computer alerts on its internal speakers.  
11  
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Setting your computer’s audio output device  
Mac users:  
1. Go to System Preferences and select Sound Settings.  
2. Make sure “Bose SoundLink Audio” is the selected Output device.  
PC users (Windows 7):  
1. Go to the Control Panel and choose Hardware and Sound.  
2. Select Manage Audio Devices.  
3. Under the Playback tab, select “Bose SoundLink Audio” and set it as the default.  
Note: After setting the audio source, you may need to restart your music application.  
Note: See page 22 for computer requirements.  
12  
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
®
Pairing a Bluetooth device  
To play music from your phone, tablet, computer, or other Bluetooth device, you will not need  
the SoundLink® USB key and should set it aside for now.  
The Wave® SoundLink® adapter can wirelessly connect your Wave® system to your mobile  
phone, tablet computer, or other Bluetooth enabled device.  
1. Make SoundLink® Discoverable  
Using the Wave® SoundLink® remote control, press the SoundLink/AUX  
button until SOUNDLINK appears on the Wave® system display panel. Press  
and hold down the Presets 5 button for 5 seconds.  
The indicator on the SoundLink® adapter flashes steadily and  
DISCOVERABLE flashes on the Wave® system display panel.  
2. Select SoundLink® from the Device List  
Turn on your phone, tablet computer, or other device and locate its Bluetooth device list.  
Scroll through the device list and select “Bose SoundLink Audio”.  
3. Enter Passcode  
If prompted for passcode, enter 0000. Some devices also ask you to accept the connection.  
4. Complete Pairing  
The Wave® system emits a brief beep and SOUNDLINK appears on the display panel when  
the connection is ready for use.  
Note: To pair additional devices (up to 6), repeat steps 2-4 above.Only one device can be used at a  
time.  
13  
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Using multiple Bluetooth devices  
If you have paired the Wave® system with more than one Bluetooth device, you can easily switch  
between devices by following these tips:  
Disconnect one source before connecting another  
To disconnect a Bluetooth device, turn off the device’s Bluetooth feature.  
The device will remain in the SoundLink® memory and will automatically reconnect when  
you turn on the device’s Bluetooth feature. (Be sure the USB key is removed from the  
computer before connecting with a Bluetooth device.)  
Wait for the Wave® system to find your device  
When powered on, the Wave® system will always search for the USB key first, then each of the  
Bluetooth devices in its memory. If you have multiple paired devices, there may be a short delay  
while the system searches through the list.  
Clearing the memory  
Press and hold the Presets 6 button on the remote for 10 seconds until you hear a tone. The  
Wave® system clears all devices from its memory and returns to Discoverable mode.  
14  
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Remote control functionality  
Mute  
SoundLink/AUX  
• Press: Selects the audio from your  
computer or Bluetooth enabled device,  
or an AUX device (if one is connected to  
the system).  
• Press to silence audio.  
• Press again to restore audio.  
Volume  
Press again: Switches between  
your computer or Bluetooth enabled  
device, and the AUX device.  
• Press: Turns the volume up or down.  
Press and hold: Adjusts the volume  
faster.  
Play/Pause*  
• Begins music track play.  
• Pauses a playing track.  
Seek/Track*  
• Press: Skips to the previous or next  
CD track or music track.  
Press and hold: Scans back or ahead  
through the current track.  
®
Note for Wave radio II owners:  
The new remote provides all of the  
®
buttons needed to operate the Wave  
radio II, plus some that work solely  
®
with the Wave music system.  
*May not work with Internet radio and some music applications.  
15  
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Battery replacement  
WARNING: Keep the remote control battery away from children. It may cause a fire or chemical  
burn if mishandled. Do not recharge, disassemble, heat above 212ºF (100ºC), or incinerate. Dispose  
of a used battery promptly. Replace only with a battery of the correct type and model number.  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with Duracell,  
Eveready, Energizer, Maxell, Toshiba, or Shun Wo CR2032 or DL2032 3-volt lithium battery.  
Troubleshooting  
Problem  
What to do  
Computer and Wave®  
Press the SoundLink/AUX button to turn on the Wave® system and select  
system do not connect.  
the computer.  
Make sure the SoundLink® adapter is connected to the Wave system.  
®
®
Symptom A:  
SOUNDLINK or  
COMPUTER do not  
appear on the Wave® system  
display and no lights blink.  
Unplug the Wave system for 30 seconds and plug it back in.  
If you received an upgrade CD with your kit and have not used it, be sure  
to run it now.  
If problem persists, contact Bose Customer Service. Refer to the address  
list included in the carton.  
16  
 
   
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Problem  
What to do  
Symptom B:  
Make sure the USB key is plugged in and your computer is turned on.  
®
The Wave® system  
Decrease the distance between the Wave system and your computer.  
See “Connection range” on page 22.  
display reads NO SIGNAL  
and/or PRESS PLAY TO  
CONNECT  
®
Move the Wave system away from possible sources of interference such  
as another wireless device, microwave oven, or wireless network router.  
If you are using a desktop computer, try moving the USB key to a port that  
provides a more direct path to the adapter. Or use a USB extension cable,  
available for purchase at computer stores.  
Remove the USB key from computer, wait 30 seconds and insert it again.  
®
Unplug the Wave system for 30 seconds and plug it back in.  
Try making the connection manually. Refer to “Manually linking the  
SoundLink® adapter and USB key” on page 10.  
No sound when the  
computer music plays.  
Press the SoundLink/AUX button on the SoundLink® remote to select your  
computer as the source. COMPUTER should be displayed.  
®
Make sure your Wave system volume is turned up and the sound is not  
muted.  
Make sure the volume on your computer is turned up and is not muted.  
Make sure your music application is running and the volume is turned up  
and not muted.  
Check your computer sound settings to make sure “Bose SoundLink  
Audio” is selected as the audio output device. Refer to page 12.  
Close or quit the music application on your computer and restart it.  
Restart your computer.  
17  
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Problem  
What to do  
Remove the SoundLink® USB key from your computer, wait 30 seconds,  
Computer does not  
recognize the SoundLink®  
USB key (in its list of  
connected devices).  
and insert it again.  
If you are using a USB hub, make sure the hub is powered.  
Try a different USB port. If you are using a powered USB hub, try moving  
the SoundLink® USB key to a USB port on the computer.  
Remove the SoundLink® USB key, restart your computer, and insert the  
USB key again.  
Check your computer sound settings to make sure “Bose SoundLink  
Audio” is selected as the audio output device. Refer to page 12.  
Refer to the owner’s guide, help system, or technical support for your  
computer to learn how to detect and install new hardware.  
®
Reception of sound from the  
computer is poor or the  
sound is dropping out.  
Move the SoundLink® adapter farther from the Wave system.  
Change the angle of the antenna on the SoundLink® USB key.  
Decrease the distance between the Wave system and your computer. See  
®
“Connection range” on page 22.  
®
Try moving the Wave system away from possible sources of interference  
such as another wireless device, a microwave oven, or wireless computer  
network router.  
Use a USB extension cable, available for purchase at computer stores.  
Plug the USB key into the appropriate end of the cable and the computer  
into the other end.  
Close other applications that can tax your computer memory.  
If you continue to experience reception problems, contact Bose Customer  
Service. Refer to the address list included in the carton.  
18  
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Problem  
What to do  
Make sure your computer media player or Internet radio application is  
selected as the active window.  
Play/Pause and Seek  
buttons do not control music  
on the computer.  
Note: Not all players and Internet radio services support this form of  
playback control.  
®
Upgrading your Wave music system, as needed  
If your kit includes an upgrade CD, it is important to use the CD  
before making any SoundLink® kit connections.  
Follow this procedure:  
®
1. Make sure your Wave music system is plugged in and ready  
®
to use. For detailed instructions, refer to the Bose owner’s  
guide that came with the system.  
2. Insert the update CD, label side up, into the disc drive on the  
system.  
The update process begins automatically and UPDATING  
®
appears on the Wave system  
display.  
When the update is complete, the system ejects the disc. Your system is now compatible with  
the SoundLink® adapter.  
19  
 
 
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
If your kit includes an adapter power pack  
®
1. On the rear of the SoundLink adapter, insert the adapter power pack plug into the  
DC power connector.  
2. Connect the AC power cord into the adapter power pack.  
3. Plug the AC power cord into an AC (mains) outlet.  
SOUNDLINK POWER  
CABLE UNPLUGGED  
®
scrolls across the Wave  
system display if the  
required power pack is not  
connected when you press  
the SoundLink/AUX button.  
Adapter  
power  
pack  
DC power  
connector  
AC  
power  
cord  
20  
 
 
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Customer service  
For additional help in solving problems, see notes about the product at: Owners.Bose.com.  
To contact Bose Customer Service for help, or to replace a lost remote control, see the phone  
numbers on the inside the back cover of your Wave® music system owner’s guide. Refer all  
servicing to qualified service personnel. Refer to the contact information listed on the inside back  
cover of your Wave® music system owner's guide.  
Limited warranty  
®
®
Your Bose SoundLink kit is covered by a limited warranty. Details of the limited warranty are  
provided on the product registration card that is included in the carton. Please complete the  
information section on the card and mail it to Bose. Failure to do so will not affect your limited  
warranty rights.  
What you must do to obtain Limited Warranty Service:  
Return product, with proof of purchase from an authorized Bose dealer, using the following  
procedures:  
1. Contact the Bose organization in your country/region (visit Global.Bose.com for Bose  
contact information in your country/region) for specific return and shipping instructions;  
2. Label and ship the product, freight prepaid, to the address provided by the Bose  
organization in your country; and  
3. Place any necessary return authorization number prominently on the outside of the carton.  
Cartons not bearing a return authorization number, where required, will be refused.  
21  
 
   
Tab 8, 16  
Tab 7, 15  
Tab 6, 14  
Tab 5, 13  
Tab 4, 12  
Tab 3, 11  
Tab2, 10  
English  
Technical information  
Adapter power rating  
100-240VAC, 50-60Hz, output: 5VDC, 500mA  
Connection range  
Wireless capability covers a range of up to 60 ft. (18.5 m), which can vary according to the type  
of home construction and signal obstructions (multiple walls, metal appliance, etc.). It can also  
be affected by the presence of other wireless devices (such as network routers or microwave  
ovens).  
Dimensions  
SoundLink® adapter: 3.6" H x 2.6" D x 1" W  
(9.1 cm H x 7.6 cm D x 2.3 cm W)  
Weight  
SoundLink® adapter: 0.33 lb.  
(150 grams +/-10 grams)  
Computer requirements  
Compatible with computers running Windows XP or Vista systems or MAC OSX (10.4 or later).  
Requires use of a USB port on a computer or a powered USB hub connected to the computer.  
Bose® system requirement  
Exclusive use of the Bose link connector on the rear of the Wave® system.  
22  
 
   
English  
Tab 2, 10  
Tab 3, 11  
Tab 4, 12  
Tab 5, 13  
Tab 6, 14  
Tab 7, 15  
Tab 8, 16  
Multi-disc changers  
The SoundLink® adapter cannot be used in conjunction with a multi-disc changer because the  
Wave® music system has only one Bose link input.  
Bluetooth QD ID  
SoundLink® USB key: B015403  
SoundLink® Adapter: B015665  
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and  
any use of such marks by Bose Corporation is under license.  
23  
 
©2011 Bose Corporation, The Mountain,  
Framingham, MA 01701-9168 USA  
AM323698 Rev.01  
 

Belkin Switch G30 153 User Manual
Black Decker Mixer PRSM600 User Manual
Blue Rhino Outdoor Fireplace 252726 User Manual
Bose Headphones AM383407 User Manual
Brother Fax Machine 580MC User Manual
Bushnell Digital Camera 119835 User Manual
Cadence Stereo Amplifier ZRS C4 User Manual
Carrier Air Conditioner 19XRV User Manual
Casio Printer RJA514733 9 User Manual
Chief Manufacturing Indoor Furnishings KSG110 User Manual