Braun Iron PV 2202 User Manual

English  
Ceramic sole plate  
ProGlide-jet  
PV 2202  
PV 2205  
PV 2210  
Your Braun steam iron has a unique,  
new sole plate made out of a special gliding  
ceramic material. This process engineered  
by Braun makes the sole plate extremely  
easy gliding. Thanks to its properties you  
will save time during the ironing process.  
PV 2212  
Type 4692  
Steam iron  
English  
Use Instructions  
Guarantee  
Service Centers  
 
Praktical Guidelines  
Type of Water to be Used  
This iron is designed for tap water. However, if  
you have hard water we recommend to use a  
mixture of 1/2 part tap water and 1/2 part distilled  
water from drug stores or grocery stores.  
Dry ironing  
Set the steam regulator 4in position « »  
Jet of steam*  
Spray / shot of steam  
2-function button:  
With the models 2210 and  
2212 the functions «water  
spray» and «shot of  
steam» can be activated  
with a 2-function button.  
The desired function can  
be selected by turning the  
button 7as far as it will  
go. The marking (blue =  
water spray or red = shot  
of steam) must point to  
the respective function (f).  
Turn the button from blue  
(spray) to red (shot of  
steam) anti-clockwise  
(coming from the outlets  
pat the slim pointed tip)  
o): Caution:  
Keep children away from  
the jet of steam and do  
not hold your fingers in  
front of the outlets p  
(= steam off) (c) for dry ironing. The water  
spray 7may be used at any temperature  
setting to dampen the laundry. The jet of steam  
6and the shot of steam 7buttons can be  
activated during dry ironing, provided that the  
temperature selector 1is within the continuous  
red area  
Important: Never use distilled water (battery  
water). Do not add any additives (e. g. starch) to  
the water.  
when activating this function.  
When ironing within the red range  
area the jet of steam function 6  
Steam ironing  
(see «Table of features»)  
Temperature selection: Set the temperature  
selector 1within the red  
range steam (b) and wait  
To fill iron  
1. Pull the plug out of the wall outlet.  
can be used (e). To do so, press the button 6at  
intervals of no less than 5 seconds. The jet of  
steam has been designed not only for steaming  
hard to reach areas like pleats, inside of pockets  
etc., but also for steaming hanging clothing (e. g.  
velvet skirts, curtains, etc.) (g). The jet of steam  
functions between horizontal and upright  
positions. Be careful not to touch sensitive  
textiles with the hot sole plate.  
2. Put the steam regulator 4in position « »  
(= steam off).  
until the iron has reached the selected  
temperature (i. e. the pilot light 8goes off).  
Steam ironing is possible in the entire red range.  
Steam ironing at lower temperatures may cause  
water drops instead of steam. Should this  
happen, turn the steam regulator 4to the  
and from red to blue clockwise (f).  
3. Open sliding shutter 2.  
4. Place the iron in the upright position and fill  
with water slowly through the tank opening 2  
to the «max.» marking L(a), using the  
beaker q.  
Storage  
After ironing, always pull the plug out of the wall  
outlet. Set the temperature selector 1to «min.»  
position « » (= steam off) (c).  
Shot of steam*  
(coming from the vents  
in the sole plate):  
When ironing within the  
red area  
the shot  
of steam function can be  
used. It gives an extra,  
(b) and the steam regulator 4to « » (= steam  
5. Close sliding shutter.  
Steam regulator 4:  
Select the quantity of  
steam required (c) for  
off) (c).  
Selecting the temperature  
To empty the iron hold it with the open water tank  
opening 2downwards (h) and shake it 1 or 2  
times. The pivoting cord 9conveniently winds  
up around the cord storage k.  
Connect the iron to a safely located wall outlet  
and select the ironing temperature with the  
temperature selector 1(b). As soon as the pilot  
light 8goes out, the iron has reached the  
temperature selected. To avoid water dripping,  
always rest the iron upright while heating it up  
each garment with the  
steam regulator 4. You  
can increase the quantity  
by turning the steam  
regulator clockwise (wide  
markings) to the end of the red marking.  
particularly powerful shot of steam penetrating  
deep into the textiles in order to straighten  
creases, collars and pleats. The function «shot  
of steam» can be used in normal ironing and  
also horizontally for steaming hanging clothing  
(e. g. velvet skirts, curtains etc.) (g). Press the  
shot of steam button 7at intervals of no less  
than 5 seconds. When steaming be careful not to  
touch sensitive textiles with the hot sole plate.  
IMPORTANT: Store the cool steam iron in a dry  
place and always standing on its heel rest j.  
The sole plate may be damaged by remaining  
water if it is stored horizontally. The warranty  
does not cover faults or damage resulting from  
improper storage of the iron.  
keep the steam regulator 4in position « »  
(= steam off) (c).  
Caution: While ironing do not turn the steam  
regulator further, otherwise hot water may come  
out from the sole plate (see section  
You will usually find the following symbols in your  
garments:  
«Decalcifying/Self-cleaning»).  
By turning the steam regulator anti-clockwise  
you can reduce the quantity of steam or turn the  
Maintenance and Cleaning  
To remove residues of minerals/starch from the  
sole plate always use steel wool. Never use a  
scouring pad, vinegar or other chemicals. The  
steam vents mand jet of steam outlets pmay  
be cleaned manually with a toothpick, if  
necessary. Clean the sole plate regularly if you  
use starch or other aids on the clothes for  
ironing.  
steam off « » (= steam off) (see «Ironing  
* If pressed too frequently, it can drip. Should this  
happen, wait a few seconds before using it  
again.  
Guide»).  
The temperature selector 1is marked with  
these symbols:  
Constant steam: Your braun steam iron ist  
equipped with a special tank configuration to  
provide constant steam even when the water  
level in the tank is low.  
min. The iron is connected  
Spray (coming from the  
nozzle 3): The spray  
function can be used at  
any temperature, to  
dampen laundry. To do  
so, press the button 7  
(water spray = blue).  
Synthetics (acrylic, acetate)  
●● Silk/rayon/nylon/polyester/  
cotton blends/wool  
Extra steam*  
(coming from the  
steam vents in the sole  
plate): For stubborn  
creases and wrinkles,  
●●● Cotton/linen  
max. Linen  
Select the temperature you need according to  
these symbols.  
collars and cuffs.  
When ironing within  
the red range  
Spray, shot of steam, jet of steam  
Before you start ironing, we recommend to press  
the buttons 3 or 4 times, in order to activate  
these functions.  
area the extra steam function can  
be used. You can press the button 5(d) for 3  
seconds at intervals of no less than 15 seconds.  
4
5
 
Decalcifying / Self-cleaning  
Cleaning the anti-calc. valve on the steam  
regulator  
During the time the sole plate is cooling down we  
recommend to decalcify the anti-calc. valve in  
the following way:  
1. Put a small quantity of white vinegar (not  
vinegar essence) or lemon juice into a glass or  
bowl.  
Ironing Guide  
Guarantee  
We grant a 1 year guarantee on the product  
commencing on the date of purchase.  
Braun ProGlide-jet irons have a built-in system  
(anti-calc. valve) to prevent calcification. It allows  
you to clean residues from the steam chamber.  
Do not use commercial decalcifiers; they may  
damage the sole plate. We recommend to use  
the self-cleaning function every 3 months.  
To begin ironing, it is best to start with fabrics  
requiring a lower temperature (e. g. synthetics),  
and continue with those requiring a higher  
temperature (e. g. cotton, linen).  
Silk and silk-like synthetics tend to waterspot,  
therefore before using the water spray feature,  
test it on an inconspicuous spot first.  
Within the guarantee period we will eliminate,  
free of charge, any defects in the appliance  
resulting from faults in material or workmanship  
either by repairing, or exchanging parts or  
exchanging the whole appliance as we may  
choose.  
2. Immerse just the bot-  
tom part of the valve in  
the liquid, wait till it is  
decalcified and care-  
fully brush of remain-  
ing residue (E) .  
Fabrics  
Temperature  
regulator  
setting  
Steam  
regulator  
setting  
Not covered by this guarantee: damage arising  
from improper use or storage (operation with  
incorrect current/voltage, plugging it into an  
unsuitabie power point, breakage use of  
commercial decalcifyers, wet storage on the  
ironing surface), normal wear and defects which  
have a negligible effect on the value or operation  
of the appliance.  
Synhetics  
(acrylic, acetate)  
(= steam off)  
Do not use a metal  
brush.  
Silk, rayon,  
nylon, polyester,  
cotton blends  
●●  
(= steam off)  
to max.  
1. Turn the steam regulator 4to the position « »  
(= steam off).  
3. Then, rinse it under  
running water without touching the lower end  
of the valve.  
Wool  
●●  
(= steam off)  
to max.  
The guarantee becomes void if repairs are  
undertaken by unauthorised persons and if  
original Braun parts are not used.  
2. Fill the water tank to the marking «max.» L  
and turn the temperature selector 1to the  
●●● marking («self-cleaning» = SC) (A).  
Cotton  
Linen  
●●●  
(= steam off)  
to max.  
Re-inserting the steam regulator with anti-calc.  
valve  
1. Re-insert the steam regulator so that the  
The guarantee only comes into force if the date  
of purchase is confirmed by the dealer's stamp  
and signature on the guarantee card and  
registration card.  
3. Plug the iron into the socket and wait till the  
pilot light 8goes off.  
●●●  
to max.  
(= steam off)  
to max.  
double-arrow  
the iron (F).  
aligns with the marking on  
4. Unplug the iron and hold it over a sink.  
Mixed fabrics: Always select the temperature  
suited for the most sensitive fibre the garment  
contains. Follow manufacturer’s instructions on  
the label.  
This guarantee extends to every country where  
this appliance is supplied by Braun or its  
appointed distributor and where no import  
restrictions or other legal regulations hinder or  
prevent service being given under guarantee.  
2. Then push it down carefully and at the same  
time turn the button anti-clockwise.  
5. Turn the steam regu-  
lator 4clockwise to  
the end of the red  
3. Keep turning the button  
marking (B) and then  
to the marking « »  
(= steam off).  
Subject to chance without notice.  
6. keep turning it to the  
double-arrow marking  
. The steam regu-  
lator will lift (C).  
Service under the guarantee does not affect the  
expiry date of the guarantee. The guarantee on  
parts or entire appliances which are exchanged  
ends when the guarantee on this appliance  
expires.  
4. If your iron has the shot  
of steam, refill the tank  
with water, heat the  
iron up and press the  
button 73 to 4 times in  
the shot of steam  
This product conforms to the  
EMC-Requirements as laid down by  
the Council Directive 89/336/EEC.  
7. Pull out the steam  
regulator together with  
the valve vertically (D).  
Do not touch the lower  
end of the anci-calc.  
valve with your fingers,  
to avoid a possible  
greasy film.  
In the event of a claim under this guarantee,  
hand in the complete appliance with the valid  
guarantee card to your dealer, or send both to  
the nearest Braun Customer Service Centre.  
function before ironing, to rinse the iron.  
ATTENTION: The iron must not be used without  
the steam regulator and the anti-calc. valve.  
All other claims including for damages resulting  
from this guarantee are excluded unless our  
liability is legally mandatory.  
8. Allow all water to drain through the steam  
vents in the sole plate, while shaking the iron  
slightly.  
(Caution: Hot water and steam come out from  
the sole plate.)  
Those claims arising out of the sales contract  
with the vendor are not affected by this  
guarantee.  
For UK only:  
This guarantee in no way affects your rights  
under statutory law.  
9. Wait for the sole plate to cool down and then  
clean it (see «Maintenance and Cleaning»).  
10. Make sure that the sole plate is completely dry  
before storing it.  
6
7
 
 

Bissell Vacuum Cleaner 2880 User Manual
Black Decker Laminate Trimmer 3265 User Manual
Blodgett Oven SG2136 E G User Manual
Brother Sewing Machine NX 600 User Manual
Bushnell Digital Camera 119466 User Manual
Cables to Go Switch 29570 User Manual
Canon Camcorder 814XL User Manual
Casio Electronic Keyboard SK 8 User Manual
Chamberlain Garage Door Opener 2500DC User Manual
Cisco Systems Home Security System 15454 FTF2 User Manual