Swivel Head Food Processor
OWNER’S MANUAL
Model FP110H
120V., 60Hz., 550 Watts
USA:
EURO-PRO OPERATING LLC
Canada: EURO-PRO OPERATING LLC
4400 Bois Franc
94 Main Mill Street, Door 16
Plattsburg, NY 12901
St. Laurent, QC H4S 1A7
Tel.: 1 (800) 798-7398
COPYRIGHT © EURO-PRO OPERATING LLC 2006
Model FP110H
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
ONE (1) YEAR LIMITED WARRANTY
1. Read all instructions before using
the appliance. It is suggested
that you keep these instructions
in a safe place for future
9. Do not use outdoors.
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
10. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
11. Keep hands and utensils away
from moving blades or discs
while processing food to reduce
the risk of severe injury to
persons or damage to the food
processor. A scraper may be
used but must be used only when
the food processor is not running.
12. Blades are sharp. Handle
carefully. When handling the
chopper blade always hold it by
the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on
the base without first putting bowl
properly in place.
14. Be certain cover is securely
locked in place before operating
appliance.
15. Never feed food by hand. Always
use food pusher.
16. Do not attempt to by-pass the
cover interlock mechanism.
17. Always operate food processor
with the cover in place.
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, return the complete appliance and accessories, freight prepaid to:
reference.
2. Your voltage must correspond to
the voltage printed on the bottom
of the appliance.
3. To protect against electrical
shock, do not immerse the motor
housing (base), cord, or plug in
water or other liquid.
4. Close supervision is necessary
when the appliance is used by or
near children.
5. Unplug appliance from outlet
when not in use, before putting
on or taking off parts and before
cleaning.
US:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901
Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St Laurent, Qc, H4S 1A7
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging
or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
6. Avoid touching moving parts at
all times.
7. Do not operate the appliance with
a damaged cord or plug, or after
the appliance malfunctions, has
been dropped or damaged in any
manner. Return the appliance to
EURO-PRO Operating LLC for
examination, repair, electrical or
mechanical adjustment.
8. The use of attachments including
canning jars not recommended
by the manufacturer may cause
fire, electric shock or injury to
persons.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions. RETURN TO:
SAVE THESE INSTRUCTIONS
EURO-PRO OPERATING LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901
____F__P_1_1_0_H____________________________________________________________
Appliance model
FOR HOUSEHOLD USE ONLY
______________________________________________________________________
Date purchased
Name of store
______________________________________________________________________
Owner’s name
______________________________________________________________________
Address
City
State
Zip Code
Printed in Turkey
12
REV. 05/06
1
Operating Instructions
Cleaning & Maintenance Instructions
Congratulations! As the owner of a new Swivel Head Food Processor, you are
about to use a very versatile and powerful kitchen appliance that will quickly become
an indispensable item in your kitchen. Bravetti Platinum Pro products are engineered
to meet the highest quality standards and are designed to offer the ultimate in ease of
operation and convenience.
1. Pull the storage compartment out
Cleaning and Maintenance
from the back of the unit. (Fig. 17)
Caution: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position and press the swivel head
release button before inserting or
removing attachments.
IMPORTANT INFORMATION
Please read all the following instructions carefully:
• Never immerse the unit, cord or
plug in water or any other liquid.
• Clean the main unit with a damp
cloth only.
• Use extreme caution when
cleaning the chopping blade as
the blades are very sharp.
• All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
• If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl.
• The processor lid, protective blade
guards, anti-slip pad and the sealing
ring may be washed in lukewarm
water and a mild dishwashing liquid.
DO NOT place these in the
dishwasher.
IMPORTANT
Fig. 17
For your protection, the Swivel Head Food Processor has a double safety switch so
that it cannot run unless the bowl with lid is locked in place. Do not attempt to by-pass
the safety interlock mechanism.
2. Place blades into the assigned slots
inside as shown below. (Fig. 18)
Note: The blades only fit in each slot
one way, with face of blade facing
towards the center of the blade storage
compartment. The G (large fry blade,
faces the rear of the storage
IMPORTANT
The swivel head will not rotate to the unlock position unless the control dial is in the
“Off” position.
compartment.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
Using the Storage Compartment
The food processor comes with a blade
storage compartment.
Caution: Remove the protective blade guards from blades before using in the
food processor.
Fig. 18
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
11
GETTING TO KNOW YOUR
SWIVEL HEAD FOOD PROCESSOR
Operating Instructions
3. Remove and empty the processor
Re-settable Thermal Safety
Device
Your Swivel Head Food Processor
has been designed with a unique safety
system which prevents damage to the
unit’s motor and drive system, should
you inadvertently overload your
appliance. The safety system will
automatically cut the electric power to
the appliance when the device senses
an overload or excessive temperature
in the motor or drive system. Should
this occur during use and the appliance
stops functioning, following is the re-
setting procedure:
bowl. Ensure that no
food is jamming the cutting blades
or attachments.
1. Swivel Head
2. Turbo Pulse Button
3. Speed Control Dial
4. Swivel Head Release Button
5. Food Processor Body
6. Blade Storage Compartment
7. Suction Cups
8. Food Processor
Food Pusher
9. Processor Lid
10. Processor Lid Seal
11. Whipping Blade
12. Processor Double Blade
13. Protective Blade Guards (x2)
(For storage purposes only)
14. Processor Main
4. Allow the appliance to cool down
for a minimum of 30 minutes.
5. Re-install the processor bowl, turn
the swivel head to the locked
position and re-plug appliance in
the wall outlet.
6. Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the On/Off
speed control to the “Off” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours.
After this time has passed, repeat
the restart procedure, steps 5 and
6 above.
1. Turn the On/Off speed control dial
Chopping Blade
to the “Off” position
15. Processor Spindle
16. Food Processor Bowl
17. Processor Bowl Shaft
18. Julienne Blade
2. Unplug the unit from the wall
receptacle and press the swivel
head release button before
inserting or removing attachments.
19. Grater
20. Thick Shredding Blade
21. Thin Shredding Blade
22. Thick Slicing Blade
23. Thin Slicing Blade
24. Main Blade Holder
25. French Fry Blade
26. French Fry Blade Holder
27. Spatula
Technical Specifications
Voltage:
Power:
120V., 60Hz.
550 Watts
Food Processor Capacity:
6 Cups (1.5 Liters)
* Note: Illustrations may differ from actual product
10
3
Operating Instructions
Operating Instructions
Whipping Blade
Speed Control Dial
The speed control dial has speed
settings as follows:
Caution: BLADES ARE SHARP!
Always hold the blade assembly
from the top. ALWAYS remove the
chopping blade protective guards
before using.
Caution: Make sure that the unit is
unplugged from the power source
and the speed dial is in the “Off”
position. Press the swivel head
release button so that the swivel
head is in the unlocked position
before inserting or removing
attachments.
•
•
•
•
Off
1 to 9
Max
Pulse/Turbo
2. Assemble the main chopping blade
onto the spindle. Ensure that the
tabs on the underside of the spindle
are aligned with the main chopping
blade. (Fig. 3)
The speed can be adjusted while the
food processor is in use. (Fig. 1)
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power.
Tabs
1. Fit the processor bowl and spindle
as previously described.
Main Chopping Blade
Fig. 3
Fig. 16
2. Fit the whipping blade over the
spindle and press firmly into place.
(Fig. 16)
Pulse
FOR SAFETY, ALWAYS LEAVE
THE PUSHER IN PLACE WHILE
OPERATING THE PROCESSOR.
3. Fit the spindle with chopping blade
onto the motor shaft located on the
bottom of the bowl. (Fig. 4)
3. Place the ingredients into the bowl.
Fig. 1
4. Fit the lid onto the bowl. Rotate the
swivel head and press to lock into
position. Insert food pusher into
feed chute.
Note: Do not use for dough.
Caution: The "Pulse" and "Turbo"
function is only intended to be used for
short "bursts" of processing. Damage
to the unit may occur if this function is
used for prolonged periods of time.
Hints & Tips for Whipping:
Blade & Spindle
Motor Shaft
•
•
Use to make whip egg whites or
whipped cream.
When whipping egg whites make sure
that eggs are at room temperature for
best results.
5. Plug in the food processor.
6. Turn the food processor “On”
selecting high speed.
Operating The Food Processor
7. Remove the whipping blade from
the bowl before removing the
whipped ingredients.
Fig. 4
Setting Up:
Caution: Make sure that the unit is
un-plugged from the power source and
the swivel head is in the off position
before inserting or removing any
attachments and before cleaning.
4. Fit the processor lid onto the food
processor bowl firmly.
Important: The unit will NOT
operate without the processor lid in
place and the swivel head in the
locked position.
Processing Examples With The Whipping Blade
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow motor to stop
and run again for another 20 seconds.
5. When fitted correctly, the lip on the
processor lid will fit into the notch on
the food processor body. (Fig. 5)
PRODUCT
QUANTITY
RECOMMENDED
SPEED
OPERATION
TIMES
1. Place the food processor bowl onto
the processor body. (Fig. 2)
EGGS
4 LARGE EGGS
17.5 OZ/500mL
1-MAX
10 – 20 SECONDS
15 – 30 SECONDS
WHIPPING CREAM
8 – MAX
Lip on
Safety
Cover
* Always allow food to cool before placing in the bowl.
Fig. 5
Fig. 2
4
9
Operating Instructions
Operating Instructions
6. Turn the swivel head clockwise until
WARNING: USE THE FOOD
WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH THE
FEEDER TUBE.
Important Note: Do NOT operate
continuously for more than 20
seconds at one time.
it stops turning and push down until
it “clicks” into place. (Fig. 6)
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH THE
FEEDER TUBE.
The food processor may be used with
one blade or two blades, depending on
type of food, finer chopping results, or
speed of processing. (Fig. 8)
Unlocked Position
Locked Position
7. Do not overload the food
processor bowl. In one operation,
you can process a maximum of 5
cups (1250mL) of food.
5. Do not overload the bowl. In one
operation, you can process a
maximum 5 cups (1250 ml) of
food.
Spindle
Main
French Fry Blade Assembly
Processing Examples
Recommended speed for processing
with chopping blades is High.
Double
Blade
Caution: Make sure that the unit is
unplugged from the power source
and the swivel head is in the “Off”
position before inserting or
Blade
Thin Shredding
(carrots, potatoes,
removing attachments.
Fig. 6
A
cucumbers, cabbage)
7. Plug in the processor and turn the
speed control dial to the desired
speed. If the processor does not
come on, check that the swivel head
and processor lid are both correctly
fitted and locked into place. For
safety, always use the food
pusher when putting food into the
feeder tube. NEVER feed by hand.
(Fig. 7)
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
Fig. 8
Thick Shredding
(Lettuce, carrots, onions)
B
1. To open the food processor, ensure
that the speed control dial is in the
“Off” position and press the swivel
head release button. (Fig. 9)
Thick Slicing
(Cabbage, carrots,
onions)
C
The French Fry blade (G) may
already be assembled onto the
French Fry blade holder. (Marked as
Fry Blade Holder.)
Thin Slicing
(Carrots, cucumbers, raw
potatoes, lettuce)
D
Note: The French Fry blade will only
fit into the French Fry blade holder;
identified by the higher hub.
Grating
(Hard Cheeses)
E
F
Fig. 9
1. Place the spindle into the food
processor bowl.
2. To use with a double blade, carefully
slip the first blade onto the spindle.
Hold this blade by the base. Hold
second blade from top grip and place
second blade on top of first. Turn
second blade clockwise to lock into
position. (Fig. 10)
Julienne
(Vegetables)
2. Using the finger holes in the French
fry blade holder, fit it over the
spindle and press firmly into place.
(Fig. 15)
Fig. 7
French Fry
(Potatoes)
G
Important: The food processor has a
swivel head system. It cannot run
unless the swivel head is locked. The
swivel head cannot be opened unless
the On/Off knob is turned to the “Off”
position.
G –French
Fry Blade
Higher
Hub
Hints & Tips for French Fry,
Shredding, Slicing, Grating &
Julienne Blades
Fig. 15
•
For shredding, place food
Using the Double Chopping
Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
horizontally into the feeder tube.
For slicing place the food vertically.
If grating potatoes or apples, add 1
tsp lemon juice to prevent them
from turning black.
Potatoes can be sliced using the
thin slicing blade for chips or use
the large French Fry blade if making
French fries.
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
•
•
3. Place the lid on the food processor
bowl, and lock the swivel head into
position.
Fig. 10
Warning: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP.
ALWAYS remove the chopping
blade protective guards before
using.
•
3. Then place the blade assembly onto
the shaft of the processor bowl.
Always hold the chopping blade
assembly by the top of the spindle.
4. Plug in the processor.
8
5
Operating Instructions
Operating Instructions
4. Place ingredients to be processed
2. Press the other end of the blade
Hints & Tips for
Chopping Blades:
in the bowl.
until it clicks into place. (Fig. 13)
5. Place the processor lid onto the
bowl with lip inside of the notch on
the food processor body. Rotate the
swivel head and press to lock into
position. Insert the food pusher into
the feeder tube.
•
The double chopping blade can be
used for chopping meat, fish,
vegetables, cheese, etc. setting the
speed to maximum.
•
•
For finer chopping, increase the
length of time you process.
6. Plug the processor into a wall outlet.
Fig. 13
For coarser chopping, use the pulse
button for a few seconds and
monitor food texture.
Fig. 11
7. Turn the speed control dial to the
desired speed setting.
Note: The food processor unit will not
operate if the swivel head is not locked
securely.
3. Place the spindle into the food
processor bowl.
9. When finished processing the
ingredients, turn the speed control
dial to the “Off” position and
press the swivel head release
button. The swivel head will
automatically turn to allow you to
remove the bowl lid.
•
Pre-cut larger pieces to make them
fit into the feeder tube. When
chopping hard foods (e.g. meat,
cheese) cut into 1-inch ( 2.4 cm)
cubes.
4. Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 14)
8. Keep hands and utensils away from
the cutting blades while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food
by hand. Always use the food
pusher. (Fig. 11)
Slicing, Shredding, Grating &
Julienne Blade Assembly
10. Remove the chopping blade(s) first
before removing the processed
food.
Caution: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
“Off” position. Press the swivel
head release button so that the
swivel head is in the unlocked
position before inserting or
FOR SAFETY, ALWAYS USE
THE FOOD PUSHER WHEN
PUTTING FOOD INTO THE THE
FEEDER TUBE. NEVER FEED
BY HAND.
Fig. 14
Warning: Use Extreme Caution
When Handling Blades. Blades Are
Sharp.
removing attachments.
Processing Examples With The Double Chopping Blade
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
5. Place the lid on the food processor
bowl, and lock the swivel head into
position.
PRODUCT
QUANTITY
RECOMMENDED
SPEED
OPERATION TIMES
6. Plug in the processor and select
desired speed on speed control
dial.
(used in 10 - 20 second intervals)
MEAT*
ONIONS
NUTS
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
MAX
5 - 6
15 - 30 SECONDS
15 - 30 SECONDS
15 - 30 SECONDS
1. Place the blade of your choice on
the blade holder. Insert the longer
tab on the side of the blade holder
first. (Fig. 12)
8-MAX
FISH*
CHEESE
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 SLICES
1 - 8
1 - 8
15 - 30 SECONDS
15 – 30 SECONDS
10 – 20 SECONDS
30 SECONDS
LIQUIDS (SOUPS)
CARROTTS
BREAD
1 - 8
6 - 8
Longer Tab
Fig. 12
6 - 8
15 – 30 SECONDS
15 – 30 SECONDS
15 – 30 SECONDS
APPLES
24.5 oz / 700 gr.
MAX 4 BUNDLES
8 – MAX
MAX
PARSLEY
* Remove all bones before processing.
** Always allow food to cool before placing in the bowl.
6
7
|