SPECIFICATION SHEET
RM50000 SERIES
(
)
RANGE HOOD
AcombinationofItalianchimneyhooddesignwith
tremendous value to meet the requirements of
today’s conventional appliance and kitchen styles.
TYPICAL SPECIFICATION
Range hood shall be Broan Model RM50000.
Unit shall be for indoor use only.
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a recirculation kit).
Motor to be permanently lubricated.
Unitshallhavefour-speedfanswitchandseparatelightswitch.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
FEATURES
Professional style design
Finishes: 430 Stainless Steel #4 Brushed, White, Black
Wall mount installation
Seamless corners for easy cleaning
Ducted/non-ducted telescopic flue - fits 8 ft. to 9 ft. ceilings
6” round duct connector/backdraft damper
Includes non-ducted kit for indoor exhaust recirculation
270 cfm centrifugal blower
•
•
•
•
•
Air delivery shall be no less than 270 CFM.
Unit shall be U.L. and cUL listed.
•
•
•
Multi-speed slide control
Dual incandescent lighting (2 x 40 W) (bulbs included)
Dishwasher-safe aluminum filter features a quick-release
•
•
•
latch and professional style appearance
Available sizes: 30”, 35-7/16”
•
OPTIONS
Replacement grease filter and bulbs available
Replacementcharcoalfiltersavailable(ModelFILTEREB40
or Part No. SB03300495)
•
•
FlueExtensionfor10-ft.ceiling(ductedapplications)(Model
RFX50 series in Stainless Steel, White and Black — 35”
long)
•
Flue Extension for 10-ft. ceiling (non-ducted applications)
(Model RFXN5004 in Stainless Steel only — 35” long)
•
SPECIFICATIONS
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products,astheyareavailabletoconsumers.Product
performance is rated at 0.1 in.static pressure, based
ontestsconductedinastate-of-the-arttestlaboratory.
Sonesareameasureofhumanly-perceivedloudness,
based on laboratory measurements.
VOLTS
AMPS
CFM
SONES
DUCT
120
2.86
270
6.5
6” round
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
90H
99043162E
|