Bushnell Telescope 78 1645 User Manual

Lit#: 91-0027/03-01  
®
Natureview  
SpottingScope  
OBJECTIVE  
LENS  
POWER CHANGE RING  
FOCUS RING  
INSTRUCTIONS  
EYEPIECE  
Model: 78-1645  
C O N G R A T U L A T I O N S ,  
T E L E P H O T O G R A P H Y :  
First remove dust caps from the eyepiece and  
objective lens. Then screw the photo adapter  
tube on to the spotting scope eyepiece. Thread  
the T-mount adapter on to the photo adapter  
tube. (See your dealer for the correct T-mount.)  
Attach the T-mount adapter to the camera like any  
other camera lens, adjust to the desired power  
and rotate the focus ring until the image is clear.  
You are now ready for telephotography.  
You have one of the lightest and most versatile  
spotting/field telescopes in the world. The Natureview  
has a 60mm. diameter objective lens and has multi-  
coated optics for an exceptionally clear and crisp view.  
The extra-long eye relief is easier to use, especially for  
those who wear glasses or will use the scope for long  
periods of time.  
F O C U S I N G :  
The focusing system is easy and accurate. Rotate  
the Focusing Ring, until the image seems to be in  
sharp crisp focus. This is all there is to it. There is no  
need to overshoot or hunt for the correct focus. Once  
the image appears sharp, stop focusing - the image is  
in the best focus with minimum eye strain.  
M A I N T E N A N C E :  
Your Natureview does not require any  
maintenance beyond the occasional cleaning.  
With a cloth, brush off the outside of the spotting  
scope to remove any dirt or dust. You can use a  
mild household cleaner - sparingly - to remove  
any stubborn dirt. Keep the optics clean; do not  
allow dust or water to stay on the outside of the  
objective lens, the eyepiece window, or the  
eyepiece lenses. Follow the directions with the  
kit.  
Z O O M E Y E P I E C E  
The Natureview comes with a zoom eyepiece which  
gives a magnification range of 15-45 power. To change  
Magnification, grasp and rotate the Power Change  
Ring. The magnification will be indicated on the scale  
next to the index dot. It may be necessary to refocus  
the spotting scope after changing magnification.  
Do not disassemble the spotting scope.  
Unauthorized disassembly not only voids the  
warranty but may cause damage from the lack of  
special tools and techniques.  
T R I P O D A T T A C H M E N T :  
To attach your Natureview spotting scope to the  
tripod, simply tighten the hand attachment screw on  
the tripod into the integral Tripod Mount hole on the  
base of the scope.  
SEE PAGE 2 FOR WARRANTY/REPAIR INFO  
 

Black Box Computer Accessories 26577 User Manual
BMW Automobile MHA 4330 User Manual
Bosch Appliances Clothes Dryer WTMC1501UC User Manual
Bosch Appliances Range HGS3053UC User Manual
Bowers Wilkins Portable Speaker 7NT User Manual
Bush Hog Tiller RTS40 04 User Manual
Canon Digital Camera Vixia HG20 User Manual
Casio Clock DQR 300U User Manual
Casio Printer KL 120 User Manual
Cisco Systems Network Card Cisco 7010 User Manual