C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
VX412C
SPDT Switching
Module
The VX412C is a C size, Register
based switching card that provides
32 channels of 5A, Form-C
switching. User connection to the
module is through two (2) DIN
41612 Type F48M connectors.
Normally closed, normally open and
common terminals are provided for
each of the non-latching relays.
MODID and Board Select indicators
are included. Module is equipped
with BIT capability and shielding.
Specifications:
VXIbus Compliance
Complies with ANSI/IEEE Std. 1014-
Relay Life (operations):
Maximum Input Voltage:
Terminal to Terminal:
250 Vdc or acrms
Terminal to Chassis:
250 Vdc or acrms
1987 and VXIbus Rev 1.4
No Load
1 x 107
A16:D16 DTB Slave
Register based
250 Vac, 5A, Resistive 1 x 105
Relay Operative Time:
4 to 7 msec
Maximum Switchable Voltage:
No Interrupts
100 Vdc, 200 Vacrms
IACKIN tied to IACKOUT
BRX tied to BGX
Relay Release Time:
Maximum Switchable Current:
(DC or ACrms):
1 to 2 msec
Per Contact:
Per Module:
5A
50A
Form Factor: Size C
Built-in test via register feedback
Power Up/Down States:
Maximum Switchable Power:
Normally open contact is open.
Per Channel:
Per Module:
150W, 1250VA
1500W, 12500VA
Power:
+5V @ 1.0A typical
+12V @ 1.5A typical
Closed Channel Resistance:
Initially ≤ 0.1 Ω
Applications
• Power Switching
• Control
Ordering Information:
(6Vdc @1A)
Description
Part Number
Insulation Resistance
(between any two points):
>108Ω
VX412C
Locking Conn
11026205-0001
See Accessories
• LF Signal Switching
|