Cabletron Systems Switch CSX500 User Manual

CSX500 SETUP GUIDE  
PRE-CONFIGURATION INFORMATION  
Only qualified personnel should install the CSX500. This Setup Guide is intended for the experienced  
network equipment installer.  
This Setup Guide describes the tools needed to configure the CyberSWITCH CSX500.  
For further details concerning the operation of the CSX500, refer to the HSIM-W84 documentation on  
the QuickSet CD. The HSIM-W84 is similar to the CSX500. The difference is that the HSIM-W84 is a  
NOTE  
module that is installed into a host device, while the CSX500 is a standalone unit. All other information  
pertaining to the device is the same.  
ROUTER/SWITCH/INVERSE MUX  
ENET  
LAN  
ASYNC  
T1-1  
T1-2  
T1-3  
T1-4  
LNK  
RX  
TX  
LNK  
STS  
LNK  
LNK  
LNK  
STS  
PWR  
CPU  
STS  
STS  
STS  
CONSOLE  
TELCO  
WAN BRANCH OFFICE CONCENTRATOR  
Figure 1 The CSX500  
QuickSet CONFIGURATION SETUP  
Tools needed  
The following tools are required to configure the CSX500:  
Personal Computer (PC)  
Read Me First! instruction sheet (enclosed in the manual package)  
QuickSet CD (located in the shipping box with your device)  
Cabletron Systems highly recommends using the QuickSet utility to configure the CSX500. Using the  
QuickSet CD will ensure a fast and correct installation. Using other methods may not produce correct or  
as efficient results as the QuickSet CD.  
NOTE  
PN 9032534-03  
Page 1 of 2  
 
 

Boston Acoustics Speaker System Horizon MCS 100 User Manual
Bravetti Slow Cooker BKC203 User Manual
Briggs Stratton Pressure Washer 020324 0 User Manual
Brother All in One Printer 1960C User Manual
Cadillac Automobile 2008 DTS User Manual
Campbell Hausfeld Cordless Drill CL154500AV User Manual
Canon Digital Camera 5034B001 User Manual
Casio Digital Camera QV 30 User Manual
Char Broil Gas Grill 463742112 User Manual
Cisco Systems Network Card WIC 1DSU 56K4 User Manual