CDP-E494-010
© CANON INC. 2012
Display Language
1
5-1
5-2
English Getting Started
Before use, be sure to read this guide.
Reading this guide will help you learn to use the camera properly.
Store this guide safely so that you can use it in the future.
Enter Playback mode.
•
•
•
5-1
5-2
1
Press the < > button.
z
Access the setting screen.
Package Contents
1
m
Press and hold the < > button, and then immediately press
z
n
the <
> button.
Before use, make sure the following items are included in the
package. If anything is missing, contact your camera dealer.
Camera
o
p
q
r
5
Press the < >< >< >< > buttons or turn the < > dial to
choose a language, and then press the < > button.
z
m
AA Alkaline Batteries (x2)
Wrist Strap WS-800
Interface Cable IFC-400PCU
Shooting
DIGITAL CAMERA Solution Disk Getting Started (this guide)
Power cord also included.
A
Turn the camera on and enter <
> mode.
6-1
6-2
2
*
A
Press the power button and set the mode dial to <
>.
z
6-1
PDF Manuals and Camera Software
2
Compose the shot.
To zoom in and enlarge the subject, move the zoom lever
z
Install PDF manuals and software from the included DIGITAL
CAMERA Solution Disk. Note that Adobe Reader is required to view
the PDF manuals.
3-1
i
toward < > (telephoto) as you watch the screen, and to zoom
j
away from the subject, move it toward < > (wide angle).
Insert the included DIGITAL CAMERA Solution Disk in the
computer's CD-ROM drive and follow the installation instructions.
•
Shoot still images.
6-3
Press the shutter button lightly ( ).
After installation, you can access the Camera User Guide by
double-clicking the desktop shortcut icon.
For software instructions, refer to the Camera User Guide or the
ImageBrowser EX Help.
z
z
•
The camera beeps twice after focusing, and AF frames are
displayed to indicate image areas in focus. Press the shutter
button all the way down ( ).
•
6-2
6-3
Shoot movies.
6-4
Compatible Memory Cards
3-2
3-3
Press the movie button to start shooting, and press it again to
z
The following memory cards (sold separately) can be used,
regardless of capacity.
• SD memory cards* • SDXC memory cards*
• SDHC memory cards* • Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been
stop.
Viewing
Enter Playback mode.
7-1
7-2
verified to work with the camera.
1
Press the < > button.
z
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions
(including wireless transfer). In case of an issue with an Eye-Fi card,
please check with the card manufacturer. Also note that an approval
is required to use Eye-Fi cards in many countries or regions. Without
approval, use of the card is not permitted. If it is unclear whether the
card has been approved for use in the area, please check with the
card manufacturer.
Browse through your images.
6-4
7-1
7-2
7-3
q
r
To view the pous or next image, press the < >< > buttons
z
5
or turn the < dial.
Movieidfied by a [
] icon. To play movies, go to
z
ep 7-3.
ovies.
7-3
Inserting the Batteries and Memory Card
m
he < > bn to access the movie control panel,
q
r
5
e [ ] (either press the < >< > buttons or turn the < >
l), and then press the < > button again.
Open the cover.
m
3-1
vie playback begins, and you can adjust the volume as
ned by pressing the < >< > buttons.
After the movie is finished, [ ] is displayed.
z
z
Slide the switch ( ) and open the cover ( ).
z
o
p
3-4
Insert the batteries.
3-2
3-3
Insert the batteries as shown.
z
Erase the images.
Check the card's write-protect tab and
insert the memory card.
a
1 Press the < > button.
q
r
2 After [Erase?] is displayed, press the < >< > buttons or turn the
5
m
<
> dial to choose [Erase], and then press the < > button.
Shooting is not possible with cards that have a write-protect tab
( ) in the locked position. Slide the tab up until it clicks into the
unlocked position.
z
Insert the memory card with the label ( ) facing as shown until
the lock clicks shut.
To remove the memory card, push it in until you feel a click, and
then slowly release it.
z
z
4-1
4-2
Close the cover.
3-4
Lower the cover ( ) and hold it down as you slide it, until it
z
clicks into the closed position ( ).
Setting the Date and Time
Turn the camera on.
4-1
Press the power button to turn the camera on. The [Date/Time]
z
screen is displayed.
Set the date and time.
4-2
q
r
Press the < >< > buttons to choose an option, and then adjust
z
o
p
the setting, either by pressing the < >< > buttons or turning
5
the < > dial.
Specify your home time zone.
4-3
4-3
q
r
5
Press the < >< > buttons or turn the < > dial to choose your
z
home time zone.
m
Press the < > button when finished. After a confirmation
z
message, the setting screen is no longer displayed.
Change the date and time.
n
1 Press the <
> button.
3
2 Move the zoom lever to choose the [ ] tab.
o
p
5
3 Press the < >< > buttons or turn the < > dial to choose [Date/
m
Time], and then press the < > button.
n
4 Follow step 4-2 to configure the setting, and then press the <
>
button.
|