Canon Scanner 3297B002 User Manual

Quick Start Guide  
Please read this guide before operating this scanner. After you finish reading this guide,  
store it in a safe place for future reference.  
Table of Contents  
Safety Precautions.............................. 1  
Package Contents............................... 3  
Installing the Software......................... 4  
Preparing the Scanner........................ 7  
Try Scanning....................................... 8  
Using the Scanner Buttons................. 9  
Scanning with MP Navigator EX......... 10  
Scanning Film..................................... 11  
Positioning the Scanner...................... 15  
Specifications...................................... 16  
 
Safety Precautions  
Safety Precautions  
Please read and take note of the following precautions before using the scanner and accessories.  
WARNING  
Indicates a warning concerning operations that may lead to death or injury to persons if not performed  
correctly. In order to use the scanner safely, always pay attention to these warnings.  
CAUTION  
Indicates a caution concerning operations that may lead to injury to persons or damage to property if not  
performed correctly. In order to use the scanner safely, always pay attention to these cautions.  
WARNING  
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,  
please move away from this product and consult your doctor.  
About Locations  
WARNING  
• Do not place the scanner near flammable liquids such as alcohol or thinners. If the internal electrical  
parts come in contact with flammable liquids, fire or electrical shock may result.  
CAUTION  
• Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with high  
temperatures and areas near flame sources. Fire or electrical shock may result.  
• Do not place the scanner on shaky stands, unstable surfaces or surfaces subject to frequent  
vibrations. If the scanner falls, it may cause injury.  
• When setting up the stand, read this guide carefully to place the scanner correctly. Keep the  
document cover close except when necessary. Setting the stand incorrectly may result the scanner  
to fall sideways and cause injury.  
• Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the  
scanner has heat, it may cause fire or damage.  
About the Power Supply  
WARNING  
• Do not place heavy objects on, pull or excessively bend, twist or tie the USB cable. Damaged wires  
may cause fire or electrical shock.  
• Always plug the USB cable in all the way. If it is not plugged in completely, fire or electrical shock may  
result.  
• Do not use cables other than the one supplied. Fire or electrical shock may result.  
• If lightning strikes in your neighborhood, unplug the USB cable from the scanner and refrain from  
using it. Lightning strikes could cause a fire, electric shock, or damage to the scanner.  
CAUTION  
• When unplugging the USB cable, always pull on the main body. Pulling the cable may damage the  
wires and lead to fire or electrical shock.  
1
 
Safety Precautions  
General Handling Precautions  
WARNING  
• Do not take apart or modify the scanner and supplies. Fire or electrical shock may result from  
improper handling of its components.  
• If you hear unusual noises, see smoke, feel excessive heat or smell anything unusual, immediately  
unplug the USB cable and contact your retailer or Canon Customer Support Help Desk. Continued  
use may result in fires or electrical shock.  
• Do not use flammable sprays near the scanner. Do not spill water or liquids into the scanner. Also do  
not drop metallic pieces such as paper clips or staples into the scanner. If they enter and contact the  
inner electrical parts, fire or electrical shock may result.  
• When cleaning the scanner, always unplug the USB cable. Wipe with a soft dry cloth. When it is still  
dirty, use a cloth damped with water and wrung well, and then wipe off moisture with a soft dry cloth.  
Do not use flammable liquids such as alcohol, benzene or thinners. If a flammable liquid enters the  
inner electrical parts or the cables are damaged by plugging/unplugging, fire or electrical shock may  
result.  
• When transporting the scanner, always unplug the cables. Damaged cables could cause fire or  
electrical shock.  
If anything enters the scanner, immediately unplug the USB cable and contact your retailer or Canon  
Customer Support Help Desk.  
CAUTION  
• Do not release the document cover until it completely opens/closes. If the document cover falls, it  
may lead to pinch your hands or damage the scanner and result in injury.  
• Do not place heavy objects on the scanner. Objects may fall and cause injury.  
• Do not place items that weigh 2.0 kg (4.4 lbs.) or more on the document glass. Also, do not press  
heavily (i.e., more than 2.0 kg (4.4 lbs.)) on the document cover or the document glass. The  
document glass may break and cause personal injury.  
• Do not bump the document glass or drop heavy books or objects on it. The document glass may  
break and injure you.  
• When not in use for extended periods, unplug the USB cable for safety.  
• Do not use the supplied CD-ROM in regular CD players. It produces excessively loud sound that may  
cause hearing damage.  
Setup and Operating Conditions  
• Do not set up in areas where there are excessive fluctuations in temperature. Also do not move the  
scanner from low-temperature areas to high temperature areas. Condensation may cause image  
errors. Leave the scanner enough time to gradually adapt to the new conditions before use.  
• Do not place the scanner in areas subject to direct sunlight or strong room light. It may cause  
damage to the scanner or decrease image quality. If you have to place the scanner in direct sunlight,  
make sure to use a thick curtain to block the light.  
• Leave enough space (approximately 20 cm (8 in.)) around the scanner when setting up.  
2
 
Package Contents  
Package Contents  
Scanner and Accessories  
Scanner  
USB Cable  
Film Guide  
Film Adapter Unit  
(for 35mm film strip)  
Documentation  
Quick Start Guide (this document)  
Additional Documents  
Setup CD-ROM  
Software Programs  
- ScanGear (scanner driver)  
- MP Navigator EX (utility software)  
- Solution Menu (menu panel software)  
- ArcSoft PhotoStudio (image editing software)  
On-screen Manuals  
- Scanning Guide (for ScanGear, MP Navigator EX, and troubleshooting)  
- Manuals for bundled application programs  
*In this guide, Windows Vista operating system Ultimate Edition (hereafter referred to as "Windows  
Vista") screenshots are used to illustrate explanations common to all operating systems.  
3
 
Installing the Software  
Installing the Software  
• Do NOT connect the scanner to a computer before installing the software. If you connect the  
scanner and the Found New Hardware screen appears, unplug the USB cable from the  
computer and click Cancel. The screen may close automatically when the USB cable is  
unplugged.  
• Quit all running applications before installation.  
To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the  
Canon scanner.  
• Log in as an administrator to install the software.  
• Do not switch users during the installation process.  
1 Place the Setup CD-ROM in the drive.  
For Macintosh: Double-click the Setup icon. Enter the administrator ID and password on the  
authentication dialog box.  
For Windows 2000/XP and Macintosh, skip step 2 and go to step 3.  
2 For Windows Vista, when the AutoPlay dialog box  
appears, run the setup program, and then click Continue  
to proceed when the User Account Control dialog box  
appears.  
3 If prompted, select your language and place of residence, and then click Next.  
In some countries, these dialog boxes will not appear.  
4
 
Installing the Software  
4 Click Easy Install on the main menu.  
5 Click Install to start installation.  
Carefully read the License Agreement, and then click Yes to  
proceed.  
For Macintosh, skip step 6 and go to step 7.  
6 For Windows, carefully read the Please Allow All Install  
Wizard Processes screen, and then click Next.  
7 Follow the on-screen instructions to perform the  
installation.  
8 For users in the U.S.A., when the User Registration  
screen appears, follow the on-screen instructions to  
ensure product support.  
For Macintosh, skip step 9 and go to step 10.  
5
 
Installing the Software  
9 For Windows, when the Extended Survey Program  
screen appears, confirm it.  
If you can agree, click Agree.  
10 When the installation is complete, click Restart to  
restart your computer.  
For Windows: After restarting the computer, Solution Menu will  
appear.  
For Macintosh: After restarting the computer, Solution Menu  
icon will be registered in the Dock.  
<Solution Menu>  
You can select either MP Navigator EX, the Scanning Guide  
(on-screen manual), or the Online Registration.  
* The Online Registration is available for users in the U.S.A.  
only.  
• Make sure to remove the CD-ROM from the drive and store it in a safe place.  
• If you encounter a problem during installation, see "Troubleshooting" in the on-screen manual: Scanning Guide.  
6
 
Preparing the Scanner  
Preparing the Scanner  
Unlocking the Scanner  
1 Peel the shipping tapes off the scanner.  
2 Slide the lock switch on the bottom of the scanner toward the unlock mark (  
).  
Unlock Mark  
• Handle the scanner with both hands. Be careful not to drop the scanner.  
• When you carry or transport the scanner, make sure to slide the lock switch toward the lock  
mark ( ) to fasten the scanning unit.  
Connecting the Scanner  
1 Connect the scanner to your computer with the supplied USB cable.  
• Only use the USB cable provided with the scanner. Use of other cables may lead to a  
malfunction.  
• Do not touch the metallic parts of the USB connector.  
• The scanner does not have a power switch. The power is activated as soon as the computer is  
turned on.  
• When the scanner is connected to the USB 1.1 port and HI-SPEED USB Device Plugged  
into non-HI-SPEED USB Hub message appears, ignore the message. The scanner operates  
in this condition without problems.  
7
 
Try Scanning  
Try Scanning  
This section explains the basic scanning procedures using MP Navigator EX.  
1 Place a color photo document with the side to  
Top  
be scanned facing down on the document  
glass at least 1 cm (0.4 in.) away from the  
edges of the document glass, and then close  
the document cover.  
Bottom  
2 Start MP Navigator EX.  
For Windows: Double-click the Canon Solution  
Menu icon, then click Scan/import photos or  
documents.  
For Macintosh: Click the Solution Menu icon in the  
Dock, then click Scan/import photos or  
documents.  
(*1)  
*1  
3 Click Photos/Documents (Platen)  
.
4 Select Color Photo in Document Type.  
5 Click Scan to start scanning.  
• Do not move the scanner while it is  
operating.  
• Do not see the light source directly during a  
scan job.  
6 When prompted that the scanning completed, click Exit.  
*2  
7 Click Save to save the image and close MP  
(*2)  
Navigator EX  
.
• For more information on scanning using MP Navigator EX, bundled applications, and troubleshooting, see the on-  
screen manual: Scanning Guide. To open the on-screen manual: Scanning Guide, double-click the on-screen  
manual icon on the desktop, or click on in ScanGear or MP Navigator EX.  
8
 
Using the Scanner Buttons  
Using the Scanner Buttons  
Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press  
of a button. Simply place your document on the scanner, and then press the scanner button for the  
required function. For more information, see the on-screen manual: Scanning Guide.  
COPY Button  
Prints (copies) the scanned image with a  
printer.  
SCAN Button  
Discriminates the document type  
automatically, then scans and saves it with  
appropriate settings.  
PDF Button  
Saves the scanned image as a PDF file.  
E-MAIL Button  
Attaches the scanned image to a new  
e-mail message.  
• Before using scanner buttons, make sure that the required software programs for each function are installed on  
your computer using the supplied CD-ROM. See "Setup CD-ROM" on page 3.  
If the scanner buttons do not work properly, see "Troubleshooting" in the on-screen manual: Scanning Guide  
.
For Mac OS X v.10.3.9: Before using the scanner buttons, you need to set Image Capture (in Applications folder)  
to open MP Navigator EX automatically when a scanner button is pressed.  
Start Image Capture, and then click Options and select MP Navigator EX in Application to launch when scanner  
button is pressed:.  
9
 
Scanning with MP Navigator EX  
Scanning with MP Navigator EX  
MP Navigator EX enables you to perform various tasks, such as compositing images, scanning with the  
scanner driver (ScanGear), and correcting/editing scanned images, as well as simply scanning.  
Starting MP Navigator EX  
1 Click Scan/import photos or documents in the Solution Menu.  
You can also start it by following procedure.  
For Windows: Select Start (All) Programs Canon Utilities MP Navigator EX 2.1, and click  
MP Navigator EX 2.1.  
For Macintosh: Open Applications Canon Utilities folders, then double-click the MP Navigator  
EX 2.1 icon.  
The navigation mode window of MP Navigator EX is displayed.  
Features of MP Navigator EX  
MP Navigator EX is constituted of the following three sheets by the function.  
Scan/Import Documents or Images sheet  
View & Use Images on your Computer sheet  
Custom Scan with One-click sheet  
• For more information on MP Navigator EX, see the on-screen manual: Scanning Guide.  
10  
 
Scanning Film  
Scanning Film  
This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning  
film.  
• Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of  
other units may lead to malfunctions of the connected unit and the scanner.  
• Do not touch the metallic parts of the FAU connector.  
• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can  
affect image quality or damage the film.  
1 Attach the cable for the Film Adapter Unit to the  
FAU connector on the scanner's side panel.  
Insert the cable plug of the Film Adapter Unit  
all the way into the FAU connector.  
2 Open the document cover and place the Film  
Guide on the document glass of the scanner.  
Align the Film Guide's tab with the FAU symbol on the  
document glass of the scanner.  
3 Remove the cap from the Film Adapter Unit and  
gently set the Film Adapter Unit over the first  
frame in the Film Guide.  
Align the tab on the Film Adapter Unit with the Film  
Guide.  
You need to calibrate the scanner before scanning film for  
the first time. Do not place a film strip in the Film Guide at  
this point as it is not required for calibration.  
11  
 
Scanning Film  
4 Gently close the document cover.  
5 Start MP Navigator EX.  
Follow the step 2 in "Try Scanning" on page 8.  
6 Click Film.  
7 Click Scan.  
8 Click OK on the calibration message window.  
Do not move the scanner while it is  
operating.  
9 When the scanning message window appears,  
open the document cover, remove the Film  
Adapter Unit, and then attach the cap to the unit.  
12  
 
Scanning Film  
Guidelines  
10 Place the film in the Film Guide.  
Place the film face up in the Film Guide (images and  
words should read correctly from above) with the  
spaces between frames aligned with the guidelines on  
the guide.  
11 Remove the cap from the Film Adapter Unit  
and gently set the unit over the frame you  
wish to scan.  
Align the tab on the Film Adapter Unit with the Film  
Guide.  
Do not move the Film Adapter Unit once it  
has been placed on the Film Guide. Sliding it  
may scratch the film.  
12 Gently close the document cover.  
The document cover does not touch the document glass. Be careful not to force the  
document cover down.  
13 Click OK on the scanning message window.  
The scanned image is displayed in the preview area.  
Do not move the scanner while it is  
operating.  
14 Confirm the scanning image, and then click  
Scan to start scanning.  
Do not move the scanner while it is  
operating.  
15 When prompted that the scanning completed,  
click Exit.  
13  
 
Scanning Film  
16 Click Save to save the image and close MP  
Navigator EX.  
• After the scanning is finished, remove the  
Film Adapter Unit, and then attach the cap to  
the unit. Remove the film and the Film Guide  
from the document glass.  
• Do not leave the film strip in the Film Guide  
for an extended period of time as heat from  
the unit may damage the film.  
• For more information on scanning film, see  
"Scanning Film" in the on-screen manual:  
Scanning Guide.  
14  
 
Positioning the Scanner  
Positioning the Scanner  
Horizontal Position  
The document cover fully opens to allow easy scanning of  
large or bound documents. An oversized document can be  
scanned section by section into a single image using the  
stitch-assist function of MP Navigator EX. For details, see the  
on-screen manual: Scanning Guide.  
Hold the document cover with one hand, and press and hold  
at the base hinge as you carefully lower the cover  
all the way down.  
Alignment Mark  
Do not place items that weigh 2.0 kg (4.4  
lbs.) or more on the scanner. The scanner  
may not work or you may break the  
document glass if you press down the  
document glass firmly.  
Top  
Bottom  
Cover the scanner with a black cloth if external light enters  
around the scanned item.  
Upright Position  
If you are scanning thin documents (i.e., a single sheet or  
double-folded sheet), this position saves the most space.  
Thick documents or films cannot be scanned in this position.  
Pull out the stand on the bottom of the scanner until it clicks,  
and set the scanner upright on a flat stable surface. Gently  
open the document cover as far as it goes (stops at  
approximately 40°) and slide down the document along the  
document cover.  
Approximately 40°  
• Do not force the document cover open; it  
does not fully open when the scanner is in  
the upright position.  
Alignment  
Mark  
• Always close and secure the document  
cover first when lifting the scanner in the  
upright position.  
Thin Item  
Document  
Cover  
15  
 
Specifications  
Specifications  
CanoScan LiDE 700F  
Flatbed  
Scanner Type  
Sensor Type  
Light Source  
CIS (Color Contact Image Sensor)  
3-color (RGB) LED  
Optical Resolution *1  
Selectable Resolution  
9600 x 9600 dpi *2  
25-19200 dpi (ScanGear)  
48 bit input (16 bit input for each color (RGB))  
48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB))  
Color  
Scanning Bit Depth  
16 bit input / 16 bit *3 or 8 bit output  
Grayscale  
Color  
33.5 msec./line (4800 dpi), 33.8 msec./line (2400 dpi),  
8.6 msec./line (1200 dpi), 4.5 msec./line (600 dpi),  
2.4 msec./line (300 dpi)  
Scanning Speed *4  
(Photo or Document)  
11.3 msec./line (4800 dpi), 5.9 msec./line (2400 dpi),  
2.9 msec./line (1200 dpi), 1.8 msec./line (600 dpi),  
2.3 msec./line (300 dpi)  
Grayscale, B&W  
Scanning Speed *4 (Film)  
Interface  
2.8-223.9 msec./line  
Hi-Speed USB *4  
Maximum Document Size  
Film Type/Number of Frames  
Scanner Buttons  
A4/Letter: 216 x 297 mm  
35 mm strip (negative/positive) *5 / 1 frame  
4 buttons (COPY, SCAN, PDF, E-MAIL)  
5 °C to 35 °C (41 °F to 95 °F)  
Temperature  
Humidity  
Operating Range  
10 % to 90 % RH, 20 % to 80 % RH for film scanning  
without condensation formation  
Power Requirements  
Power Consumption  
Supplied via USB port (No external adapter required)  
In operation: 2.5 W maximum, Stand-by: 1.5 W *6  
Suspend: 11 mwatts *6  
,
Exterior Dimensions (W) x (D) x (H)  
Weight  
292 x 409 x 44 mm (11.5 x 16.1 x 1.8 in.)  
Approximately 2.1 kg (4.6 lbs.)*7  
*1 Optical Resolution represents the maximum sampling rate based on ISO 14473.  
*2 For the document types other than films, the resolution is up to 4800 x 4800 dpi.  
*3 For film scanning only.  
*4 The fastest speed in Hi-Speed USB mode on Windows PC. Transfer time is not included. Scanning  
speed varies according to the document types, scan settings, or specifications of the computer.  
*5 35 mm slides are not supported.  
*6 USB connection to PC.  
*7 Film adapter unit weight is included.  
• Specifications are subject to change without notice.  
Model Name: K10337 (CanoScan LiDE 700F)  
16  
 
CANON U.S.A. INC.  
One Canon Plaza, Lake Success, NY 11042 U.S.A.  
CANON AUSTRALIA PTY LTD  
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia  
CANON NEW ZEALAND LIMITED  
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand  
QT5-2200-V01  
XXXXXXXX  
©CANON INC. 2009  
PRINTED IN VIETNAM  
 

Billy Goat Chipper TKD505SPT User Manual
Black Decker Fan FS1600R User Manual
Black Decker Iron IR008SNA User Manual
Blue Rhino Lawn Mower FC 0007 User Manual
Bonavita Hot Beverage Maker BV382517V User Manual
Bostitch Nail Gun 171430REVA User Manual
Campbell Hausfeld Portable Generator GN301502AC User Manual
Canon Printer C3500 User Manual
Cerwin Vega Speaker CVA 118 User Manual
Chauvet Calculator 250irc User Manual