Casio Watch MA0904 EA User Manual

MA0904-EA  
Operation Guide 4706  
Thank you for purchasing this CASIO watch. To ensure that it can provide you with the years of service for which it is designed, be sure to read this manual carefully and  
follow the instructions contained herein. Pay particular attention to the precautions at the end of this manual text.  
Your watch may differ somewhat from the one shown in the illustration.  
Modes and Indicators  
Selecting a Mode  
Each press of C sounds a confirmation tone and cycles through available modes in the sequence shown below.  
The watch will revert to normal timekeeping automatically if you leave it in the e-DATA MEMORY Mode without performing any operation for about two or three minutes.  
4IMEKEEPING -ODE  
Eꢀ$!4! -%-/29 -ODE  
7ORLD 4IME -ODE  
!LARM -ODE  
ꢁ,IGHT  
0RESS  
ꢁ-ODE  
SWITCHING  
ꢁ$ISPLAY  
SWITCHING  
(AND !DJUSTMENT -ODE  
3TOPWATCH -ODE  
#OUNTDOWN 4IMER -ODE  
Days of the Week  
SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday,  
FR: Friday, SA: Saturday  
Reading the e-DATA MEMORY Mode Digital Display Screens  
2ECORD 3CREENS  
Switching between Display Screens  
In the Timekeeping Mode, each press of D toggles the digital display  
contents as shown below.  
'DWD  
If a record contains more than five characters, the characters will scroll  
from right to left. The end of the record will be indicated by the mark.  
Press A to pause right-left scrolling. Press A again to resume  
scrolling.  
#ALENDAR 3CREEN  
4IMEKEEPING -ODE  
30ꢀLQGLFDWRUꢀꢁ$ꢀIRUꢀ$0ꢂ  
2EMAINING -EMORY 3CREEN  
0RQWK  
'D\  
6HFRQG  
0LQXWH  
+RXU  
5HPDLQLQJꢀPHPRU\  
'D\ꢀRIꢀWKHꢀZHHN  
Illumination  
ꢀꢁSECOND INTERVAL  
Pressing B in any mode (except when a  
setting screen with a flashing setting is on  
the display) illuminates the face of the watch  
for about two seconds for easy reading in  
the dark.  
This screen will show “100%” when there are no records in memory and  
ꢀ,IGHT  
“0%” when memory is full.  
0ASSWORD 2EGISTRATION 3CREEN  
ꢀ0ASSWORD NOT REGISTERED  
Important!  
Illumination may be difficult to see under  
bright sunlight.  
If you press any button besides B, or if an alarm or other beeper  
operation starts while the face is illuminated, illumination will turn off.  
ꢁꢂSECOND INTERVAL  
This screen will show “SET” to indicate that there is no password  
currently registered.  
If there is a password, this screen will show “CHANGE”.  
Using e-DATA MEMORY  
Use C to enter the e-DATA MEMORY Mode.  
To create a new e-DATA MEMORY record  
1. In the e-DATA MEMORY Mode, use D to  
display the remaining memory screen.  
If memory is full, delete one or more  
records you no longer need to make room  
You can use the e-DATA MEMORY Mode to store e-mail addresses, Web  
site URLs, and other information for instant recall whenever you need it.  
The maximum number of records that can be stored depends on the  
number of characters contained in each record.  
If each record contains 63 characters, you can store up to five records.  
Note that 63 is the maximum number of characters allowed in one  
record.  
for the new data. See “To delete record  
5HPDLQLQJꢀPHPRU\  
data” for more information.  
If each record contains seven characters, you can store up to 40  
records. Note that 40 is the maximum number of records, even if each  
record contains fewer than seven characters.  
2. Hold down A for about two seconds until  
the display changes to a data input field with  
the flashing cursor at the first character  
position. This is the data input screen.  
3. Use D (+) and B () to scroll through  
characters at the current input position.  
Holding down either button scrolls at high  
speed.  
When you enter the e-DATA MEMORY Mode, the record displayed  
when you last exited the mode appears first.  
If you password protect your data, a password input screen will appear  
first whenever you enter the e-DATA MEMORY Mode. In this case, data  
will not be viewable unless the correct password is entered first.  
See “Using a Password to Protect Data” for information about password  
protection of data.  
)LUVWꢀUHFRUGꢀFKDUDFWHU  
ꢀ–  
Supported Characters  
Lower Case Alpha: a to z  
Upper Case Alpha: A to Z  
Numerals: 0 to 9  
To search for e-DATA MEMORY data  
ꢀꢁ  
In the e-DATA MEMORY Mode, press D to  
scroll through the data record-by-record.  
Holding down D will scroll the records at  
high speed.  
Symbols: *– _@˜⁄ \?#!% . : ; ’ , &=+()  
4. When the character you want is at the  
current cursor position, press C to move  
the cursor one character to the right.  
ꢀ3CROLL  
As shown in the example below, a screen  
showing remaining e-DATA MEMORY and a  
password registration screen appear following  
the e-DATA MEMORY records. If there is no  
data currently in e-DATA MEMORY, only the  
remaining memory and password registration  
screens appear.  
Repeat steps 3 and 4 as many times as necessary to enter all of the  
characters for the record you are creating.  
5. When the record data is the way you want, press A to exit the data  
input screen.  
The watch also will exit the input screen automatically if you do not  
perform any operation for about two or three minutes.  
If you want to create another record, repeat steps 1 through 5 above.  
Records are stored in the same sequence they are input.  
Example: When there are three e-DATA MEMORY records  
2ECORD ꢀ  
2ECORD ꢁ  
2ECORD ꢂ  
0ASSWORD 2EGISTRATION  
2EMAINING -EMORY  
1
 
Operation Guide 4706  
To turn an alarm or the hourly time signal on or off  
1. In the Alarm Mode, use D to display the screen for an alarm or for the  
hourly time signal.  
2. Press A to toggle the alarm or hourly time signal on or off.  
Turning on an alarm causes the ALM indicator to appear on the display.  
Turning on the hourly time signal causes the SIG indicator to appear.  
World Time City Code List  
City  
UTC  
City Name  
code  
Applicable Cities  
Pago Pago  
Papeete  
Nome  
San Francisco, Las Vegas, Seattle  
El Paso, Edmonton  
Houston, Mexico City  
Montreal, Miami, Boston  
Santiago  
Offset  
– – –  
–11  
–10  
–9  
–8  
–7  
–6  
–5  
–4  
–3  
–2  
–1  
0
HNL  
ANC  
L A X  
DEN  
C H I  
NYC  
CCS*  
R I O  
– – –  
– – –  
GMT  
LON  
PAR  
C A I  
J R S  
J E D  
THR  
DXB  
K B L  
K H I  
D E L  
DAC  
RGN  
BKK  
Honolulu  
Anchorage  
Los Angeles  
Denver  
Chicago  
New York  
Caracas  
(OURLY 4IME 3IGNAL 3CREEN  
!LARM 3CREEN  
6,*ꢀLQGLFDWRU  
$/0ꢀLQGLFDWRU  
Rio de Janeiro  
Sao Paulo, Buenos Aires  
To stop the alarm beeper  
Press any button.  
Azores  
Greenwich Mean Time  
Dublin  
London  
Paris  
Cairo  
Jerusalem  
Jeddah  
Tehran  
Dubai  
Kabul  
Karachi  
Delhi  
Dhaka  
Yangon  
Bangkok  
0
+1  
To test the alarm  
In the Alarm Mode, hold down D for about two seconds to sound the  
alarm.  
Rome, Madrid, Frankfurt  
+2  
Athens, Helsinki, Beirut  
Kuwait, Moscow  
+3  
+3.5  
+4  
+4.5  
+5  
+5.5  
+6  
+6.5  
+7  
Using the Countdown Timer  
Use C to enter the Countdown Timer Mode.  
You can set the start time of the Countdown Timer in units of one minute  
in the range of 1 minute to 24 hours. The watch beeps for 10 seconds  
when the end of the countdown is reached.  
Abu Dhabi  
To set the Countdown Timer start time  
1. In the Countdown Timer Mode, hold down  
A for about two seconds until the hour digits  
of the start time start to flash. This is the  
setting screen.  
Jakarta, Hanoi  
Singapore, Kuala Lumpur, Beijing,  
Taipei, Manila  
Hong Kong  
HKG  
+8  
TYO  
ADL  
SYD  
NOU  
WLG  
Tokyo  
Adelaide  
Sydney  
Noumea  
Wellington  
+9  
+9.5  
+10  
+11  
+12  
Seoul, Pyongyang  
+RXU  
2. Use C to move the flashing between  
settings as shown below.  
Guam  
Port Vila  
Christchurch  
(OUR  
-INUTE  
3. Use D (+) and B (–) to change the flashing  
setting.  
The contents of the above table are current as of June 2005.  
Time differentials in the above table are in accordance with Universal  
Time Coordinated (UTC).  
The rules governing offsets and summer time are determined by each  
individual country.  
*In December 2007, Venezuela changed its offset from – 4 to – 4.5. Note,  
however, that this watch displays an offset of – 4 (the old offset) for the  
CCS (Caracas, Venezuela) city code.  
Holding down either button scrolls at high  
speed.  
+RXU 0LQXWH  
ꢀ–  
ꢀꢁ  
Repeat steps 2 and 3 to set the  
Countdown start time you want.  
To configure the setting to countdown 24  
hours, set the start time as 0:00.  
4. After the setting is the way you want, press  
A to exit the setting screen.  
The watch also will exit the setting screen automatically if you do not  
perform any operation for about two or three minutes.  
Using the Alarm and Hourly Time Signal  
Use C to enter the Alarm Mode.  
To use the Countdown Timer  
Your watch has five alarms, which can be configured independently of  
each other. The watch beeps for about 20 seconds when an alarm time  
is reached. The Hourly Time signal causes the watch to beep every hour  
on the hour.  
In the Countdown Timer Mode, press D.  
6HFRQG  
ꢀ2ESET  
Each press of D starts or stops the  
countdown.  
The time is counted down in one-second  
steps.  
Pressing A while the countdown is stopped  
will reset to the countdown start time.  
Alarms and the hourly time signal all operate in accordance with the  
digital time of the currently selected Home City.  
ꢀ3TARTꢁ  
3TOP  
+RXU 0LQXWH  
To set an alarm time  
Pressing D again while the timer countdown is stopped will restart the  
1. In the Alarm Mode, use D to cycle through  
the alarm screens in the sequence shown  
below until the one you want to set is  
displayed.  
$ODUPꢀQXPEHU  
countdown.  
Time Up Alert  
The watch beeps for 10 seconds when the end of the countdown is  
reached.  
To stop the time up alarm  
Press any button.  
!LARM ꢀ  
!LARM ꢁ  
!LARM ꢃ  
!LARM ꢂ  
!LARM ꢄ  
(OURLY 4IME 3IGNAL  
2. Hold down A for about two seconds until  
the hour digits of the alarm time start to flash.  
The currently displayed alarm will turn  
on automatically at this point, which is  
indicated by the ALM indicator appearing  
on the display.  
$/0ꢀLQGLFDWRU  
Using the Stopwatch  
Use C to enter the Stopwatch Mode.  
The stopwatch measures elapsed time in units of 1/100 second up  
to 59 minutes, 59.99 seconds (60 minutes). When the maximum limit  
is reached, the elapsed time returns to zero automatically and timing  
continues from there.  
+RXU  
3. Use C to move the flashing between  
settings as shown below.  
To start or stop an elapsed time operation  
In the Stopwatch Mode, press D to start and  
stop elapsed time measurement.  
(OUR  
-INUTE  
ꢀ3PLITꢁ  
2ESET  
ꢀꢁꢀꢂꢂꢃVHFRQG  
4. Use D (+) and B (–) to change the  
flashing setting.  
Pressing A while an elapsed time operation  
is in progress will freeze the current split time  
on the display and continue timing of the next  
split internally. This is indicated by the SPLIT  
indicator on the display.  
+RXU 0LQXWH  
ꢀ–  
ꢀꢁ  
Holding down either button scrolls at high  
speed.  
ꢀ3TARTꢁ  
3TOP  
0LQXWH 6HFRQG  
Repeat steps 3 and 4 to set the alarm  
time you want.  
Changing to another mode while a split time  
is displayed cancels the split time operation.  
Pressing A while timing is stopped resets the stopwatch to all zeros.  
When setting the hour, make sure that AM (A) or PM (P) is specified  
correctly when using 12-hour timekeeping, or that the correct 24-hour  
time is specified.  
4O MEASURE ELAPSED TIME  
The same 12-hour/24-hour format you select for the Timekeeping  
3TOP  
2ESET  
3TART  
Mode time is also applied in the Alarm Mode.  
5. After the setting is the way you want, press A to exit the setting  
screen.  
The watch also will exit the editing screen automatically if you do not  
perform any operation for about two or three minutes.  
3
 
Operation Guide 4706  
Cumulative Elapsed Time Measurement  
Pressing D to restart the stopwatch without resetting it to all zeros causes  
the elapsed time measurement to resume from where it was last stopped.  
Adjusting the Analog Time Setting  
You can use the Hand Adjustment Mode to adjust the analog time  
manually when it does not match the digital time.  
1. Use C to enter the Hand Adjustment Mode.  
2. Hold down A for about two seconds until  
the current time starts to flash on the digital  
display. This is the setting screen.  
4O MEASURE SPLIT TIMES  
3PLIT  
2ELEASE SPLIT 3TOP  
2ESET  
3TART  
3. Press D to move the minute hand forward  
by 20 seconds.  
Holding down D will advance the hands at  
high speed. Note that hands can be moved  
forward only.  
3PLIT 4IME 3CREEN  
2ELEASE SPLIT  
63/,7ꢀLQGLFDWRU  
You can start high-speed forward hand movement by holding down  
D as you press B.  
Press any button to stop high-speed hand movement.  
High-speed hand movement also will stop automatically when the  
hands complete one full 12-hour revolution.  
4. After the setting is the way you want, press A to exit the setting  
screen.  
The watch also will exit the setting screen automatically if you do not  
perform any operation for about two or three minutes.  
Taking too long to adjust the hand positions can cause the analog  
setting to be a bit behind. If this happens, perform the above procedure  
again to advance the minute hand by one or two 20-second steps.  
4O TIME ꢀST AND ꢁND PLACE FINISHERS  
ꢀST  
ꢁND  
&INISHER  
ꢀ3ECOND  
RUNNER  
$ISPLAYS  
TIME OF  
ꢁND FINISHERꢂ  
2ESET  
3TART  
&INISHER  
ꢀ$ISPLAYS TIME  
OF ꢁST FINISHERꢂ  
FINISHESꢂ  
Configuring Time and Date Settings  
Perform the procedures in this section in the Timekeeping Mode.  
Specifications  
You should use these procedures to adjust the current time and date  
settings after having the battery replaced, etc.  
Accuracy: Within 15 seconds average per month  
Basic Functions:  
Normal timekeeping screen: Analog: Hour, minute (two hands)  
Digital: Hour, minute, second, a.m.  
(A)/p.m. (P)/24-hour timekeeping  
Date Time Screen: Month, day, day of the week, full auto calendar  
(2000 to 2039)  
Whenever you adjust the digital time setting, always be sure to adjust  
the analog time setting as well.  
To adjust the digital time and date (for your Home City)  
1. In the Timekeeping Mode, hold down A for  
about two seconds until the seconds digits  
start to flash on the digital display. This is the  
setting screen.  
e-DATA MEMORY Mode: Storage of mail addresses, Web site  
addresses, and other data  
63 characters per record: 5 records max.  
7 characters per record: 40 records max.  
Password protection  
2. To restart the seconds count from 00, press  
6HFRQG  
D on a time signal from a radio, TV, etc.  
Pressing D while the seconds count is in  
the range of 30 to 59 resets it to 00 and  
adds 1 to the minutes.  
World Time: Current time in 29 time zones (27 cities) around the world;  
GMT display; summer/standard time  
5HVHWVꢀWRꢀꢁꢁ  
Alarm:  
Daily Alarms: 5  
3ECONDS  
$34 /.ꢀ/&&  
-ONTH 9EAR  
#ITY #ODE  
(OURS  
Setting Units: Hour, minute  
Beeper: 20 seconds  
Hourly time signal: Beeps every hour on the hour  
ꢁꢂꢀꢂꢃꢄ(OUR  
TIMEKEEPING  
$AY  
-INUTES  
Countdown Timer:  
Setting Unit: 1 minute  
Countdown Unit: 1 second  
Countdown range: 24 hours  
10-second beeper when the end of the countdown  
is reached  
3. Press C to advance to the summer time/  
standard time setting screen.  
The current setting (DST ON or DST OFF)  
will be flashing on the display.  
OFF: Standard Time  
ON: Summer time (Daylight Saving Time)  
4. Press D to toggle the setting between  
standard time (DST OFF) and summer time  
(DST ON).  
5. Press C advance to the Home City setting  
screen.  
The currently selected city code will be  
flashing on the screen.  
'67ꢀ21ꢁ2))  
Stopwatch:  
Measuring unit: 1/100 second  
Measurement range: 59 minutes, 59.99 seconds (60 minutes)  
Measurement functions: Elapsed time; cumulative elapsed time; split  
times; first/second place finishers  
ꢀ7ESTWARD  
Other: Auto return to regular timekeeping; summer/standard time; 12/24  
hour timekeeping; alarm test; LED light  
ꢀ%ASTWARD  
&LW\ꢀFRGH  
Battery: CR1616  
6. Use D (Eastward) and B (Westward) to  
scroll through the city codes until the one you  
want to use as your Home City is displayed.  
Holding down either button scrolls at high  
speed.  
Approximate Battery Life: 2 years (20 seconds beeper operation, 2  
seconds light operation per day)  
Approximate battery life can be shortened by more frequent light  
operation.  
0LQXWH  
6HFRQG  
6 seconds light operation per day: 17 months  
10 seconds light operation per day: 12 months  
Be sure to select your Home City before  
+RXU  
adjusting the time setting.  
See the “World Time City Code List” for a  
complete list of city codes.  
7. Press C to select the time and date settings  
as described below, and adjust them as  
required.  
ꢀ–  
ꢀꢁ  
Use D (+) and B (–) to change the currently flashing setting.  
Holding down either button changes the setting at high speed.  
While the 12/24-hour timekeeping setting is selected, press D to  
toggle the timekeeping format between 12-hour (“12H” displayed) and  
24-hour (“24H” displayed).  
When setting the hour, make sure that AM (A) or PM (P) is specified  
correctly when using 12-hour timekeeping, or that the correct 24-hour  
time is specified.  
You can set a year in the range of 00 (2000) to 39 (2039). The day  
of the week is set automatically in accordance with the date you set.  
The watch’s full auto calendar makes adjustments for leap years and  
month lengths automatically. Because of this, there should be no  
need to change the date setting again, except after having the watch’s  
battery replaced.  
8. When all the settings are the way you want, press A to exit the setting  
screen.  
The watch also will exit the setting screen automatically if you do not  
perform any operation for about two or three minutes.  
4
 

Beko Washer WMB61431B User Manual
Blackberry Cell Phone 8900 User Manual
Black Decker Food Processor EHC650B User Manual
Bolens Lawn Mower 128 250A User Manual
Bosch Power Tools Grinder 1347A User Manual
Bose Headphones AE2 User Manual
BRK electronic Carbon Monoxide Alarm SC1000B User Manual
Bushnell Hunting Equipment 35 21X50 User Manual
Canon Scanner MS 350 User Manual
Cisco Systems Caller ID Box 7905G User Manual